Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Huawei Ascend Y320 - Firmware (OS 2.3, 4.0, 4.1, 4.2) |
Message#1 08.02.14, 20:06 | |||||||||||
Local [offline] Group: Friendssavagemessiahzine.com Messages 122 Check in: 12.07.13 Huawei Ascend Y320 Reputation: 14 | Huawei Ascend Y320 - Firmware (OS 2.3 - 4.2) Beeline Smart, Orange Tiga Description | Discussion � | Firmware � | Important information In connection with the periodic influx of people with messages: "has ripped the device. What should I do?" I decided to write a small description of those things that should not be done in order not to “mimic” the device. So, you decided to flash your device for the first time:
Drivers and Utilities MtkDroidTools-utility to install root rights, clockworkmod, etc. SP Flash Tool-program for firmware. Versions 3.1320.0.174 and 5.1343.01 are suitable for our device (try both, one may not work and the other will work for you). Drivers for firmware (only for Y320-U10, Y320-U30) Framaroot- An application for obtaining root rights from the phone. Baidu root- An application to get root rights from the phoneon the latest firmware Instructions Getting ROOT and KingRoot using VRoot These instructions are applicable for Y320-U10 (Beeline Smart, Orange Tiga) and Y320-U30. For other modifications of the Huawei Y320, the instruction may differ. Before starting any manipulations with the firmware (changing system files, installing custom recovery or modified kernel), be sure to backup your firmware using the MtkDroidTools or SP Flash Tool. This will allow you to avoid many problems in the future and, if necessary, restore everything as it was. It is also desirable to make a separate backup NVRAM - this will avoid problems and restore calibration and IMEI in the case of not entirely successful firmware. Driver installation: Installing drivers for working with MtkDroidTools Installing drivers for working with MtkDroidTools Before starting work with the MtkDroidTools utility, we need to install the ADB drivers (Android Debugging Bridge) This is done as follows: 1.To start connecting the device to a computer via USB. Among the devices that appear, we find the drive with the Mobile Partner disc (or Beeline Smart, depends on the firmware of the device) and copy the contents somewhere. This is a driver. If this did not work out (regardless of the reason), then download and unpackthisarchive. 2. Go to the phone settings and enable USB debugging. If you did not find the developer menu in the settings, then go to "Settings" ->"About phone" ->Click a few times (5-7) on the "Build Number". Or you can download the USB Debug program from the market. When it starts, it immediately takes us to the developer menu, then we do everything as in the screenshots. 3.Connect the phone to the computer using a USB cable, while not pressing ”On. USB drive ” 4. Installing drivers for working with SP Flash Tool Installing drivers for working with SP Flash Tool 1. We receive drivers from the device - see step 1 of the instruction "Installing drivers for working with MtkDroidTools". Or downloadthisarchive and unpack it. 2. We take, turn off the phone, take out the battery, insert it back. 3. Now there will be a speed check: Open the device manager, connect the phone in the off state. 4. 5. 6. 7. 8. P.S. You can connect the device located in Factory Mode and quietly, without haste, install all the drivers. How to backup: Instructions for creating a full backup ROM phone via the SP Flash Tool. Be sure to do before the firmware! We need: SP Flash Tool, MtkDroidTools and installed drivers. Item 1. Create a scatter. Go to the settings of the smartphone in the menu item "security" and put a daw on "Unknown sources." If you have not yet enabled USB debugging, then go to the smartphone settings in the menu item "About phone" and repeatedly tap on the Build number, as you will see the inscription "you become a developer", exit the menu and enter the new activated menu item "For developers, there put a checkbox on "USB debugging". We connect the included phone to the computer. Install the driver (see above), if it is not already done. Launch MtkDroidTools and wait for it to connect to the phone (see the bottom left corner of the program). Press the "Block map" button, a window with a map will appear. In this window, click the button "Create a scatter file" and save the file (the name is better not to change). Sometimes MtkDroidTools creates an incorrect scatter (of the old type, it may not be suitable for firmware). Then takethis Item 2. Reading the ROM from the phone. 2.1 Preparation Run SP_Flash_Tool Open the saved scatter (blocks with addresses will appear in the list) Go to the Read back tab. Add a block (Add button) Double click to open the added block, specify the name of the file to save (starts with ROM_) Further in the appeared window in the second field we enter into the address of the cache block from the scatter file (you can open it with notepad ++, for “Beeline Smart” it is 0x32B40000) and click OK. Note: 1) If the scatter file is of the old type, then you will immediately find the correct cache block address without any problems by opening it with notepad ++ 2) If the scatter file is of a new type, then in this case you need to drive in the cache block address marked linear_start_addr 2.2 Reading Disconnect the phone from the computer, if still not done. Turn off the phone We take out and insert the battery back In the program SP_Flash_Tool, press the Read back button Connect the phone to the USB in the program should run first red, then blue progress bars. If you didn’t run, try disconnecting the phone, distorting the battery, and then connecting it to the computer again. If it does not help, it means that there are problems with the drivers, re-read the header. The process can take up to 20-25 minutes. After the process is completed, a green circle appears, now you can disconnect the phone from the computer and turn it on. SP_Flash_Tool can now be closed. Item 3. Preparing blocks for firmware Again open MtkDroidTools and connect the included phone. Make sure that MtkDroidTools sees it. Go to the root, backup, recovery tab Click the button "Create backup from ROM_ flash" and select the previously saved file from the program SP_Flash_Tool. The program will offer to automatically create a CWM, patch the boot - this is at your discretion (but if you want a clean backup, which is recommended, then we refuse to patch). The backup will appear in the MtkDroidTools \ backups \ ... folder Now you need to save the created backup, they can always return the phone to its original state. In addition to the folder with a bunch of files from MtkDroidTools, I also recommend saving the ROM_ file for reinsurance. Important information on this manual. 1) Refusing to automatically create a CWM in the backup folder, it will be named factory_NONmodified_recovery.img and, accordingly, when you download the scatter file to the USB flash drive, it will not be picked up automatically and displayed, so for convenience it is recommended to rename it immediately to recovery.img 2) Since we cut our backup by cache block, then when you load the file scatter into the USB flash drive, you will not see the CACHE and USRDATA blocks (this is done so that you do not accidentally transfer your personal data along with the backup to the person who will bail out your backup). But there is a nuance here, if the device is restored by backup without these blocks, then it may not boot further into the boot screen, in order for the boot to complete successfully you need to go into recovery and do wipe data / factory reset. You can also completely read the memory - set the address BMTPOOL (usually 0xFFFF00A8). Then there will be a backup of all data along with the cache, data and the contents of the internal "memory card". Instructions on firmware, installing updates, custom recovery and unofficial firmware: After installing / updating / restoring firmware, it is advisable to calibrate the battery! Firmware via SP Flash Tool (the same method can be used to install custom kernel and recovery) 1. Disconnect from the computer all unnecessary, smartphone, too. 2. Restart your computer to avoid errors due to the work of other programs. 3. Plug the cable directly into the computer, but do not plug it into the machine. Do not use extension cords, splitters, and the like. 4. Run the SP Flash Tool, point to * scatter.txt in the folder with the desired firmware. (You can use the backup created and prepared in MtkDroidTools. * It also creates scatter.txt) Below you should see a list of sections, their addresses and paths to the corresponding firmware files. 5. Below, put a tick on those sections that will be stitched, with the rest - remove (for example, you can choose only recovery, only boot, or only the logo). If you wish, you can change the paths to the desired files. (For example, if you need to flash another boot, logo or recovery). Be sure to uncheck the "PRELOADER", otherwise you can get a brick. It is also not recommended to sew the section "UBOOT" 6. In the flash button, click the Download button. 7. Remove the battery from the smart 8. Plug the cable into smart. 9. Insert the battery. After that, the firmware should go. Do not try to format the device in the SP Flash Tool, it can lead to almost irreparable results !!! It is not necessary for normal firmware !!! As the mode of operation of the SP Flash Tool, you can use only the mode "Download only". The rest is only for professionals and very experienced users. Restore the smartphone from the "brick" state (if it is caused by a software failure or unsuccessful firmware) 1. Need SP Flash Tool, firmware / full backup for it, driver. 2. Run the SP Flash Tool, go to Option ->Connection ->In the USB tab, we set w / o battery. 3. Open the file scatter, remove the checkmarks from all items except PRELOADER and click Download. 4. We take out the battery from the phone and connect it to the computer. 5. If the drivers are installed correctly, the firmware will start. We are waiting for the end of the process. If the firmware has not started, you need to press the power button or the volume button (for someone like, try). 6. Disconnect the phone from the computer. 7. In the SP Flash Tool, go to Option ->Connection ->in the USB tab return auto detect; We return the removed ticks to the sections of the firmware, and with PRELOADER we remove. Click Download. 8. Insert the battery into the phone and connect to the PC. We are waiting for the end. 9. If you do not turn on yourself, then disconnect the phone from the PC, distort the battery and turn it on. If it does not load, do wipe data / factory reset in recovery. Installing recovery without using a computer. Requires root andterminal emulator 1. Rename the * .img file of the recovery to recovery.img 2. Put the recovery.img in the root of the phone's memory card / memory (sdcard0, sdcard1) 3. In the terminal For sdcard0: su dd if = / storage / sdcard0 / recovery.img of = / dev / recovery For sdcard1: su dd if = / storage / sdcard1 / recovery.img of = / dev / recovery 4. To get into the recovery: reboot recovery The same commands can be entered through the ADB shell. If the native recovery is returned instead of the modified If you, after installing a custom recovery, the stock returns spontaneously, then you need to remove from/system/etc/install-recovery.sh following lines: if! applypatch -c EMMC: recovery: 5206016: 9cfc341a7a4be53e96c57f9b81a93ef39855584f; then log -t recovery "Installing new recovery image" applypatch -b /system/etc/recovery-resource.dat EMMC: boot: 4698112: db34dc32d5cc36e8f8e8824b70dd2a06b0ecd6b4 EMMC: recovery 9cfc341a7a4be53e96c57f9b81a93ef39855584f 5,206,016 db34dc32d5cc36e8f8e8824b70dd2a06b0ecd6b4: /system/recovery-from-boot.p else log -t recovery "Recovery image already installed" fi or delete the file itself if there is nothing else there. You can then delete the files /system/recovery-from-boot.p and /system/etc/recovery-resource.dat Installing official updates in the form of update.zip 1. Put update.zip (rename if necessary) in the root of the memory card. 2. Go to "Settings" - "Memory" - "Software Update" (this item is at the bottom) - select "Update from SD-card" After that, the device will reboot into the recovery and the installation will begin. If you have stock recovery, then updates that are not signed by the manufacturer or with an incorrect signature will not be installed. Some custom recovery may refuse to install official updates in this way. In this case, use the following instructions. Installing unofficial firmware and updates (if there is a custom recovery) 1. Turn off the device. 2. Simultaneously press the buttons for increasing the volume and on and wait a little. The device will start to turn on. 3. In the menu that appears, select the "Recovery Mode" item (the topmost one, use the volume up button to switch between items, and use the volume down button to confirm the selection). Sometimes this menu does not appear and the smartphone is immediately loaded into the recovery. 4. In the recovery, use the volume buttons to switch between items, select "Install zip" - "Choose zip from sdcard". Item names may vary depending on the type of recovery you have. 5. Select your zip file with firmware, update, or some modification. This may not necessarily be update.zip in the root of the memory card, it can have any name (preferably only in Latin) and lie in any folder (it is advisable to avoid long paths and paths with spaces, better move the file closer to the root of the memory card). After that, the installation of what you have chosen will begin. Firmware Official firmware Many firmware in one post Huawei Ascend Y320-C00 (Android 4.1) Huawei Ascend Y320-U01 (Android 2.3) Huawei Ascend Y320-T00 Firmware for "Beeline Smart"V100R001C171B600 in the form of update.zip, providedandrey0678 (ATTENTION! This firmware is locked under Beeline!) Has providedcbytl : Huawei Y320-U30V100R001C511B300for SP Flash Toolmirror on Yandex.Disk The firmware is locked under the operator! Huawei Y320-U30V100R001C511B300in the form of update.zipmirror on Yandex.Disk The firmware is locked under the operator! Y320-U30-V100R001C328B500from Huawei servers Huawei Y320-U151, Android 4.1, V100R001C257B800, Australia_Roadhoundfrom Huawei servers Beeline smart V100R001C171B600 as update.zip from Huawei servers ---- V100R001C171B700 V100R001C171B700 as update.zip Y320-U01, Android 2.3 V100R001C17B214China Unicom V100R001C17B214China Unicom Huawei Y320-U01 Firmware (Y320-U01V100R001C17B215)has providedcbytl V100R001C17B500China Unicom Y320-T00, Android 4.0 V100R001CHSC01B021China Mobile V100R001CHSC01B021China Mobile V100R001CHSC01B021China Mobile V100R001CHSC01B021China Mobile Y320-C00Android 4.1 V100R001C92B611SP03China Telecom Firmwares for Huawei Y320-U351 --->HERE Firmware for Y320-U10, Y320-U30 and Y320-U151 is also on the sitehttp://huaweidevices.ru/ Unofficial firmware Before installing, be sure to backup your firmware using all available methods. So you protect yourself from possible problems. For a spoiled phone, the responsibility lies only with you. Stillzero KitKat (fake KitKat) Mod Rum OPPOwelzoh M.MOD LolliFox 1.10 (Latest Version)by XoTT29 IOS 8welzoh M.MODwelzoh Xflatby damlen32 Patches for XFlat v2, v3, + swapwelzoh Ragexperia v3.5by gaziewm Tablet editionby XoTT29 LEWA 6welzoh Xperia z3welzoh LIVE OSwelzoh MIUI 6 (without Russian)welzoh New Light & Fastwelzoh IOS7 style firmwareby XoTT29 LolliFox v1.8 Beta by FMDby XoTT29 Patches LolliFox v1.9 +1.9.1 Beta by FMD AOSP5 (for test only) jelipop from welzoh HTC ONE Xby XoTT29 FMD AOSP ROM (Android L style)by XoTT29 Deodexed stock B600.The firmware is locked under Beeline. Install through custom recovery. XROMfrom welzoh orYandex.Disk S5 NOTE-3 Allegrorom MIUI v5 New Allegro ROMfrom 1.04.14 and 05.04.14 Samsung Galaxy S4 modfromwelzoh (updated) Hibrid_ROM(not updated) ColorOS_v2fromcbytl LeWa OSfromjustified Yandex Kit KitKat (fake) MIUI Light & fast AOSP ROM From welzoh: LEWA port with 4403 Xperia honami Nokia X CyanoxygenXinvinity MuseUI Some of the previously installed firmware was removed, since they contained serious errors and they have a full replacement. Radio module firmware Backups Backup Huawei Y320-U30fromdaunti Backup firmware V100R001C171B300 with Beeline Smartfor installation via the SP Flash Tool (ATTENTION! This firmware is locked under Beeline!) Backup firmware V100R001C171B600 with Beeline Smartfor installation via the SP Flash Tool (ATTENTION! This firmware is locked under Beeline!) Backups of firmware Huawei Y320-U151 V100R001C481B700fromcbytl Orange tiga- backup firmware with Y320-U10 from weneedmoney Preloader, uboot, mbr, ebr1 by Orange Tiga If you accidentally wipe nvram, and your backup does not, then you can take ithere.Only if there is no backup of your NVRAM !!! You will need to restore your IMEI !!! Recovery To enter the recovery you need:
Modified Recovery for Huawei Y320-U10 TWRP Recovery (works only on Huawei Y320-U10) Useful Embellishments Logos and animations when loading Patch for interpreter Lewaby wezloh "Huawei Ascend" Original by Huawei From Beeline (Beeline Smart's original firmware) droid ultra Other useful Battery calibration Replacing mac-addresses Control backlight touch buttons Remapping the memory of the smartphone A small selection of useful softwarefromromansangurskiy Liquid Settings- Correction of touchscreen sensitivity If any application from Google gives an error, then download and install gapps from here:Google Apps FAQ A set of useful tweaks build.prop Entry code in the engineering menu * # * # 13646633 # * # * (dial in the native "dialer") Repair IMEI without a computerhereandhereThe program to repair IMEI directly from your phone>>HERE<<Not at all and does not always work, it is better to use MtkDroidTools Disable unused frequencies to extend operation time Image of the SYSTEM section with the Russian language for the Huawei Y320-U01 Donors Walton primo f2 Gionee v182 Fly IQ4403 Fly IQ4404 Fly IQ454 EVO Tech 1 Gionee Pioneer P2 Haier W718 (MT6572W) Gigabyte Gsmart Alto A2 Explay Golf Explay N1 Explay alto Prestigio MultiPhone PAP5450 DUO - ??? Huawei Ascend Y511 Huawei Y320-U01 OPPO Muse R821 ThL T5 Star U930 Land rover a8 CUBOT P9 Cubot GT72 Star s720, Tengda s720, Timmy E128, V-Sky v72, MPai S720 JiaYu F1 MySaga C1 XIAOCAI X800-B ZTE V818 ZTE Blade Q mt6572 ZTE Leo Q1 DNS S4004M Lenovo A369i Unlocking the phone from binding to the operator
A source ! Information provided hazrat77 Poll results Post has been editeddraiv88 - 19.12.18, 15:11 Reason for editing: Edit | ||||||||||
Message#2762 18.07.18, 07:22 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 832 Check in: 17.03.14 MegaFon Login Reputation: 24 | The people, what firmware is more or less adequate to optimize for this phone? I spilled a full-time from Huawei (I’m not sure which of the caps I’m sure about), there’s some kind of software showing percentages while charging the battery, full screen in blue background .... and constantly getting out even when charging isn’t connected ... I wanted to remove but I don’t know what it’s called, I started to rummage through Titanium, I didn’t find it, although I remember that I deleted this application, I try to enter the settings, I see a white screen |
Message#2763 18.07.18, 08:08 | |
Experienced [offline] Group: Curators Messages 429 Check in: 17.01.16 Huawei Y9 (2018) FLA-LX2 Reputation: 83 | -------------------- |
Message#2764 31.07.18, 15:53 | |
Experienced [offline] Group: Curators Messages 429 Check in: 17.01.16 Huawei Y9 (2018) FLA-LX2 Reputation: 83 | -------------------- |
Message#2765 01.08.18, 06:24 | |
a guest [offline] Group: Users Messages 1 Check in: 18.07.18 Reputation: 0 | |
Message#2766 27.11.18, 15:14 | |
Visitor [offline] Group: Users Messages 12 Check in: 25.08.17 Reputation: 0 | I came for custom recovery and Cyanogen for u10, and almost all the links in the header are broken. Guys, it would be nice to keep track of your links, at least in the header ...;) You could of course google, but it’s better to take files on trusted forum than on dubious sites. |
Message#2767 27.11.18, 15:20 | |
Experienced [offline] Group: Curators Messages 429 Check in: 17.01.16 Huawei Y9 (2018) FLA-LX2 Reputation: 83 | -------------------- |
Message#2768 27.11.18, 18:38 | |
Visitor [offline] Group: Users Messages 12 Check in: 25.08.17 Reputation: 0 | What about Cyanogenmod? The network did not find a suitable assembly for this device. |
Message#2769 19.12.18, 15:08 | |
Not Guru, just learning [offline] Group: Moderators Messages 6192 Check in: 07.03.11 Reputation: 1583 | |
Message#2770 23.01.19, 13:20 | |
Visitor [offline] Group: Active users Messages 23 Check in: 20.09.17 Reputation: 1 | Hello, please help to unlock the bodies from the operator, in the header in the section useful there is information how to do it, but there I click to download the archive, but there is no write information deleted where is it to be found? |
Message#2771 23.01.19, 13:37 | |
Experienced [offline] Group: Curators Messages 429 Check in: 17.01.16 Huawei Y9 (2018) FLA-LX2 Reputation: 83 | |
Message#2772 06.02.19, 01:28 | |
Visitor [offline] Group: Users Messages 12 Check in: 25.08.17 Reputation: 0 | Reload the link for Cyanoxygen Xinvinity |
Message#2773 06.02.19, 16:47 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 687 Check in: 22.03.13 EKEN M002 Reputation: 137 | Guys whoY320-U30, with the original firmware - be careful with the firmware! There are versions that were locked to Asian operators (they removed the sim-lock with a dongle-box when imported), therefore,flashing in Firmware Update mode may return sim-lock . If you have a live recovery, then such a smartphone is better to sew by the following method: 1. Go tofactory mode - on the switched off smartphone, we hold and hold the "Volume minus" and "On". 2. Infactory mode volume buttons select item " Version ". Confirm the choice of the middle touch button" home "(buttons in the bottom panel: back, home, menu) 3. Information we shake down with the buttons "Volume +" (Volume-). We are looking for the parameter "SW Ver. ". Immediately below it is the firmware version. (For example, I have:" Y320-U30V100R001C328B955 " ) 4. We drive in this version of the firmware in Google and look for an archive of more than 800 megabytes in size. (as a rule, it is a service firmware, it is in this archive that there are two firmware versions: for the SD card and for SP_Flash_Tool). (For example, I found my firmwarehere ) 5. Download the firmware, inside the archive we are looking for the folder with the file "update.zip "whose size must be greater than 400 megabytes. 6. Copy this file to a USB flash drive (to the root of a USB flash drive) 7. Insert the flash drive into your smartphone. We go in the recovery ("Volume +" and "On". On the android lying - the third touch button "menu") 8. Choose item "update from sdcard "(confirmation - middle touch button" home). Next - specify the file " update.zip "and confirm (the battery must be fully charged or keep the phone on charge). Pass the firmware. (about 5 minutes). Such firmware does not touch the NVRAM partition and as a rule solves 90% of problems with smart. If after such a firmware, the smartphone has not risen (or you have a dead recovery). Then look in the downloaded archive with the firmware folder with the scatter file. (this is the firmware for SP_Flash_Tool). Extract this folder and sew the smartphone using SP_Flash_Tool, but, first, in Download Only mode. |
Message#2774 06.02.19, 22:17 | |
Visitor [offline] Group: Users Messages 12 Check in: 25.08.17 Reputation: 0 | Perezalete XRom. And the question. Why in half of the firmware there is no scatter file? Need for firmware via sp flash tool. |
Message#2775 14.03.19, 22:17 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 163 Check in: 09.12.16 Meizu M3s 2/16 Reputation: 4 | Hello everyone, tell me y320-u30 will fit all the firmware from this post? Or need a certain? And what is this prefix u30? |
Message#2776 17.03.19, 20:10 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 687 Check in: 22.03.13 EKEN M002 Reputation: 137 | [email protected], 21:17 Or need a certain? Need a certain. Read my posttwo postsabove. (These are Asian smarts, which were mainly locked into Arabic operators, some of which came to us somehow). If you have a live recovery, then when searching for the firmware, follow my instructions. If the recovery (factory) is dead - download the firmware from my link, extract the folder with the scatter file from the archive and sew using SP_Flash_Tool but only in the "Download Only" mode and preferably with the "preloader" checkbox unchecked. |
Message#2777 21.03.19, 20:45 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 163 Check in: 09.12.16 Meizu M3s 2/16 Reputation: 4 | Lumen4, I asked, the firmware was successful. I run the body and all the same as it was, even the photo on the screen saver is the same. What is the problem and how to solve? Sewing not in Download Only mode is not recommended. Recover dead. The body itself works, but it is not realistic to do something on it, as it produces a bunch of errors, then it hangs. I tried the method of splashing, all the same. I understand he just does not replace the firmware files. So how to be? The firmware links in the header are broken on the Huawei Y320-U30 Post has been editedM16_Vendetta - 21.03.19, 22:13 |
Message#2778 22.03.19, 05:29 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 687 Check in: 22.03.13 EKEN M002 Reputation: 137 | |
Message#2779 22.03.19, 05:41 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 832 Check in: 17.03.14 MegaFon Login Reputation: 24 | |
mobile version | Now: 05/19/19 22:11 |