[X]Assistant

[Dymon]

ASUS MeMO Pad - Firmware
ME 172V
Description | Discussion | Firmware

Drivers and Utilities

Firmware

Alex_ROM
ASUS ME 172V WW 4.5.4
AMPC Mini Rom

Instructions

How to make a hard reset
Ruth and Recover
Ruth
Tablet recovery
Another way to recover.

Post has been editedvaalf - 29.09.16, 15:20

Reason for editing: Another way to restore

[sanxc]

HervalHello. You are not aware of what contacts of the programmer where to connect on the board?

Posted 06/06/2018 6:51 PM:

Sergikus123, Hello. I managed to restore this? Tablet

Attached images

[Waldemarchik]

sanxc
right to left count: red1, White from koraus2, white3, green4, blue5, empty contact on the board at 3v3. If there is no synchronization, switch between green and white.

[sanxc]

WaldemarchikThank you, I will try

[suvorkov]

Greetings.
I re-qualify from the reader to the writers and share my experience.
I got this tablet in my hands with the problem of encrypted storage. And on the assurances of the owner, he did not set the password.
Neither clear data nor firmware from the memory card solved the problem.
I decided to use the method of a friendbli33ard to restore the brick, but with a slight improvement. In order not to be particularly concerned with the COM and LPT ports, I used the CH341A programmer, I think, everybody who has a little knowledge of electronics has this, and it costs a penny.
Soldered according to the first scheme from the tablet to the block immediately. Wires from an old IDE plume. The chip model in the flash program (CH341A - USB Programmer 1.30) chose the W25X40, took the dump from the same postbli33ard . Considered, erased, recorded, checked without problems.
After from the memory card I filled the firmware from the header.
Well done! Problem solved.

Pinout:

Process:

[suvorkov]

I want to clarify the previous post a little. The problem is solved with the flash drive firmware. Encrypted storage did not go away, it seems that nand is in read only mode.
Can someone tell me how to force nand format?

[8965]

People like in this dump to update Google services? After the firmware there is no file manager in it to install the apk

Post has been edited8965 - 27.08.18, 20:19

[bag90]

here described how to make a hard resethttps://www.asus.com/en/support/FAQ/1006239/
Please update in the header: clapping:

[lsipone]

FirmwareAsus MeMo Pad ME172V_WW_4.5.4.rar

Perezal!

Post has been editedlsipone - 14.10.18, 06:28

[sanxc]

Herval, Hello. Tell me what files you dumped on the USB flash drive (hangs on the splash screen even crack)

[monover]

It also does not reflash. Hanging on the screen saver and all

[ExPlaY +]

Guys, problem.

I stitched the tablet, like everything went quietly through SD.

But the problem is what, at the start-up, knocks out the initial setup menu, in which the sensor works incorrectly, some part works, in the center, the rest is as if dead, who faced?

[konon4242]

Hello, please help me find working wm8950 usb device, the tablet itself is a Chinese Kocaso m766

[greytik]

mr.bin @ 06/14/13, 17:28

How to make a hard reset

Download and unzip the contents of this archive to a microSD card.
Attached filecleardata.zip (15.5 MB)

Insert the card into your device in the off state.
Turn on the machine.
Select with the help of the volume rocker ClearUserData.
Confirm with the power button.
Upon completion, the program will ask you to remove the memory coil and automatically restart the tablet in a few seconds.

Sorry for the long-beaten topic. ASUS ME 172V. After ClearUserData and MicroCD extraction, a splash screen appears, but the reboot does not go. Repeated repeatedly. Prompt further action. Thank.

Post has been editedgreytik - 18.11.18, 17:20

[evgenijj75]

Good people help !!! After rutting, the tablet turned off and does not turn on what to do?

Posted 12/08/2018 19:03:

Help after rutting the tablet does not turn on, what should I do?

[Vadynik]

Tell your story can someone come in handy
I got such a tablet with a hung screen saver, WITHOUT a download mug, just an ASUS label, no 25 series flash firmware will help here
So, it means that EMMC died, I had this h26m52002eqr 16yr
I replaced it with a similar one, stitched it with SD, did not boot from the first time, waited 25 minutes, made a reset with the same SD and everything went wrong

[sanxc]

evgenijj75, flashing programmers, one way out, he so revived

[Ambrelium]

Greetings. After resetting to the factory settings, my tablet started to show error unfortunately the process com.google.process.gapps has stopped. Model asus memo model K0W or KOW. What to do?

[Waldemarchik]

Ambrelium
More data. Psychics are banned.

[Voha888]

They brought a tablet - hanging on the screen saver. I stitched through the microSD-tablet started.
I decided to put the root - the tablet was scorched.

Who can tell what commands to revive it through the UART \ TTL \ Serial console?
The variant with CH341 is already painted here - probably it will be necessary for it, it scares away a large number of wires, so I ask about TTL

Upd: I had a MiniPRO - programmer, he could not flash the mikruhu because of the binding - he asked to install it correctly and remove the short circuit! . I had to connect the motherboard directly to LPT and sew through the command line. The dump posted in the topic helped a lot! Only I tried with several computers, and nowhere did mikruha give the “answer”, if you believe a pocket oscilloscope. Only once began to answer something, apparently he was successful. In general, the head square from this all)))

Post has been editedVoha888 - 01.03.19, 03:35

[chumz]

Mr.bin @ 06/19/13, 19:33

Firmware ASUS ME172V WW 4.5.4
http://dfiles.ru/files/dy0ki0ios
Download and unpack the contents of this archive on a clean MicroSD card while maintaining the structure.
The firmware is installed only when the battery is fully charged and the power supply is connected.
Insert the memory card into your device in the off state.
Turn on the machine.
Select with the help of the volume rocker the option "Update".
Confirm with the power button.
At the end of the process, the program will ask you to remove the memory coil and automatically restart the device in a few seconds.
For Hard-Reset \ Wipe, use the "ClearUserData" option.

Please, if possible, reload this archive to other more convenient file exchangers.

Add this item!
Make sure that the battery on the MeMO Pad is more than 30% charged and turn off the device. Press and hold the power key until the Boot menu appears.