> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


53 pagesV  < 1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> DNS S4502M - Firmware (OS 4.1.x)
assasa
Message#1
03.02.14, 16:02
perfectionem quaerere
********
[offline]

Group: Honorary Gameday
Messages 1682
Check in: 06.07.08

Reputation:-  448  +

DNS S4502M - Firmware (OS 4.1.x)
PictureS4502M
Description | Discussion | Firmware

Drivers and Utilities

Official firmware

Unofficial firmware

Kernels and Modems

Instructions
Firmware via OS:
Tweaks for build.prop
1. Prepare an SD card by formatting it in FAT / FAT32.
2. Download the archive with the firmware in ZIP format and copy it to the root of the SD card. You do not need to unpack !. Insert the SD card into the phone.
3. Turn on the device. After downloading go to Settings ->About phone ->System Update ->local updates
4. Tap on the firmware file, then agree to reboot.
5. After flashing, be sure to clear all user data. To do this, go to Settings ->Restore and reset ->Reset

Firmware through recovery:
1. Prepare an SD card by formatting it in FAT / FAT32.
2. Download the archive with the firmware in ZIP format and copy it to the root of the SD card. No need to unpack! Insert the SD card into the phone.
3. On the switched off phone, press and hold together the Volume "+" buttons (the upper part of the button on the left side of the device) and Power. After the DNS label, the recovery menu should appear.
4. Press the Volume "-" button (bottom of the button on the left side of the machine), select "wipe data factory reset" and press the Power button. Then, similarly, select the item "yes - delete all user data" and press the Power button again.
5. After formatting, select "apply update from external storage", press the button on.
6. Select the firmware file, press the button on. After flashing the phone will reboot.

Recovery and brick restoration
Recovery for DNS S4502M
Non-flying CWM
CWM
TWRP Recovery
MIUI Recovery 2.0.4- starts from the SD card from the factory / stock recovery menu (stock recovery is not replaced)
Standard Recovery

We lift the smartphone from a brick (the smartphone does not work) for DNS S4502M
Restoration of "bricks"If your phone does not turn on / Android does not start, youhere.
Scraping + Repair IMEI

Before any manipulations with the smartphone, first - BACKUP IMEI

Results of polls and polls

K
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedklich007 - 14.01.17, 15:59
Astalavista001
Message#42
27.09.13, 09:16
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 200
Check in: 25.10.12
Xiaomi Redmi Note 4X Snapdragon 4/64

Reputation:-  10  +

I got up without problems, I rebooted myself. thankmardaly

It's also normal. The Titanium backup has become completely from light 1.2, although the battery is melting before our eyes ...
Raider1972
Message#43
27.09.13, 19:20
stupid and lazy
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 673
Check in: 23.02.10
DNS S4502M

Reputation:-  91  +

Here is the Russian portD9_4.1.2_2050_V02_02d_CUSTOMER_6G.
Sawed moped and Chinese garbage.
I did not put myself, who will install, write off everything in a bundle.


--------------------
No one will die virgin. The life of everyone will have (c) K. Cobain
Pelmen19
Message#44
27.09.13, 19:37
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2975
Check in: 02.05.11
Xiaomi Redmi Note 5 4/64

Reputation:-  176  +

great, and the size just makes me happy, firmware version 2 from mardaly showed an abortion, fuck it, understand what’s in there, then I try another caste, flies without any problems ... vooshchem chot not that .. there is no time to find out, if possible By China I will try .. I don’t hurry to write down, ask yourself for certain questions ... I bought the device as a week, I don’t need to ask me for more than 2 days .. superficially try everything to find differences .. advantages, disadvantages
mardaly
Message#45
27.09.13, 19:48
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

firmware DNS_S4502MOD_270913_V2_MARDALY-removed, who put it, who does not, put the light versionshe will be better, it's easy to put, everyone put it to himself, right now on it, who does not like the core, there is a bunch of cores in the cap, change it :)
by the waycore from Innos D9 on September 27 Attached fileBoot.img_27.09.13.zip(4.98 MB)


Post has been editedmardaly - 27.09.13, 20:05


--------------------
bollod
Message#46
27.09.13, 20:08
Novice
***
[offline]

Group: Active users
Messages 46
Check in: 28.11.12
Samsung Galaxy A3 (2016) SM-A310F

Reputation:-  1  +

this item is made
uhvat
Message#47
27.09.13, 20:11
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 559
Check in: 08.09.10

Reputation:-  23  +

mardalyI wanted to ask you. In one of the previous messages you wrote that the Google market was defeated [its process is not sleeping) only by installing a hacked one. So why is it not hacked in your firmware?
SlavKa78
Message#48
27.09.13, 20:12
IT-person
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 656
Check in: 08.04.11
Samsung Galaxy S10 + Exynos 8 GB

Reputation:-  127  +

Bollod @ 09/27/2013, 23:53*
What is the problem on the last run? Not one core is not put through rekoveri

Read the topic and not repeat the question in each post.
the most likely that did not turn off signature verification ...
in general, read carefully the cap and topic and do not break the rules by asking the same questions
mardaly @ 09/27/2013, 23:48*
here is the way core from Innos D9 from September 27

: D The release date of the firmware, and the kernel is "older"
uhvat @ 09/28/2013, 00:11*
So why in your firmware it is not hacked

some work with legally purchased applications and buy new ones, but broken market doesn’t normally work with this
Yes, and "not a dream" is a special case, my legal market and I slept normally, now I put it hacked, but only because of a couple of applications
Yes, and in theory, the firmware should be as "clean" as possible in terms of cracked software, who wants to steal, let him put the broken himself separately :)

Post has been editedSlavKa78 - 27.09.13, 20:51


--------------------
._..._.!!!
._...(@ @)
-oOO (_) OOo -___________"with $ 10,000, we'd be millionaires! We could buy all kinds of useful things like ... love!" (Homer Simpson)
mardaly
Message#49
27.09.13, 20:38
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

SlavKa78 @ 09/28/2013, 00:12*
some work with legally purchased applications and buy new ones, but broken market doesn’t normally work with this
Yes, and "not a dream" is a special case, my legal market and I slept normally, now I put it cracked, but only because of a couple of applications
Yes, and in theory, the firmware should be as "clean" as possible in terms of cracked software, who wants to steal, let him put the broken himself separately

I join the above-and inDNS_S4502MOD_27092013_MARDALY_LightAll applications are legal, who want to simply and for free find where)
Who knows where in the firmware files are responsible for the sound? They say in the last Chinese they won the sound on the bluetooth, so I want to replace the files and not to create the firmware :)
for some reason it seems to me that simply replacing the library will not achieve anything

Post has been editedmardaly - 28.09.13, 08:15


--------------------
mardaly
Message#50
28.09.13, 22:06
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

DNS_S4502M_290913_MAR (196mb)
MD 5 E3945E61CE2A4EF596A78A7CE38BCD67
On google drive
Features of my firmware
Firmware based onHighScreen_20130917_V2.8_1GB_SDUpdate,
DNS s4502 firmware 205(thankVVitaly),S4502M_R01_20062013_V102
deodexed, root, init, d, zipalign
modem S4502M_R01_20062013_V102
Innos D9 core from September 5th with added support for init, d scripts (from the latest innos D9)
init, d scripts are already installed and active
applicationuniversal.init.d(clickable!) enable scripts! (change off key to on)
(check if the scripts work after installing busybox and including the scripts in universal.init.d: ​​the test log file appears in the data / lokal / tmp folder),
Russian letters in the call, battery in%, multi-colored sim in the status bar
Windows 7 bootanimation, video examples removed, some ringtones
left only the necessary applications- "rubbish" Yandex and so on, browser stock, calculator, clock and so on deleted
Google Play Store normal, added their own applications
Sound drivers from the latest innos D9_4.1.2_2050_ V02_02d
camera from Highscreen Boost (the ability to turn off the shutter sound, etc.)
Improving the smoothness, responsiveness of the wheelbarrow (not build.prop !!), energy-saving technologies
in AnTuTu issues from 8100 to 8600, on average (did 30 tests in a row) -8400
There are no problems with sleep, the battery keeps above all praise;)
all sensors work

Attached Image

Attached Image

Attached Image

Installation method
copy DNS_S4502M_290913_MAR to SD card
reboot into factory recovery
in the recovery menu, select advanced-change enable to disable
In the recovery menu, select the item "wipe data / factory reset"
In the recovery menu, select the Wipe cache partition item and activate it
in the recovery menu, select the item "apply update from external storage"
select the firmware file from the SD card and wait until the installation is completed
Note: if you are migrating from MIUI, LeWa OS, Chinese, or your mod firmware, it is advisable to do it in CWM:
wipe data partition, wipe cache partition, Wipe Dalvik Cache, format system, format data, format cache,
Naturally, before starting CWM, disable the check advanced-change enable to disable (in the factory menu)
Look carefully at the amount of space on the SD card, our device is very picky about SD cards, on some without problems, on others — not in any!

The firmware is suitable for both owners of Highscreen Boost _1GB and DNS S4502M
I stitched the firmware on this instruction to myself, and I tested it, with the signature verification turned off, with the wipes, everything was well done !! screenshots just made, thanks for downloading;)

Post has been editedassasa - 03.02.14, 16:45


--------------------
52reg
Message#51
29.09.13, 00:28
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 67
Check in: 04.10.10
Highscreen boost

Reputation:-  18  +

mardaly @ 09/28/2013, 23:06*
DNS_S4502M_290913_MAR (196mb)

it was established on BOOST normally. From the jambs, I noticed that the sound of the camera was not switchable, and even when the sound was turned off on the phone, the shutter clicked. I tried an external FX camera, the same.
mardaly
Message#52
29.09.13, 15:45
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

New firmware! (Edition 2, revised;))
S4502MOD_290913_Mardaly_Full (249mb))MD5 F31886670915160BB15436624C59CCEF
Cloud mail
Features of my firmware
Firmware based onHighScreen_20130917_V2.8_1GB,
S4502M_R01_20062013_V102
deodexed, root, init, d, zipalign, busybox
modem S4502M_R01_20062013_V102
Innos D9 core from September 5th with added support for init, d scripts (from the latest innos D9)
init, d scripts are already installed and active
In the applicationuniversal.init.d(clickable!) enable scripts! (change off key to on)
(check if the scripts work after installing the inclusion of scripts in universal.init.d: ​​the test log file appears in the data / lokal / tmp folder),
Russian letters in the call, battery in%, multi-colored sim in the status bar
butaniating DROID RAZR, removed video examples, stock ringtones
Yandex and Google junk apps, maps, stock browser, calculator, clock, alarm clock, video editor, and so on stock removed
added their own applications, clock 4.3, GPSTest, noFrillsCPU, Root + Explorer, UCBrowser
offline voice input dictionaries installed
Sound drivers from the latest innos D9_4.1.2_2050_ V02_02d and Beats Audio (sound improved)
camera from Highscreen Boost (the ability to turn off the shutter sound, etc.)
Improving the smoothness, responsiveness of the wheelbarrow (not build.prop !!), energy-saving technologies
in AnTuTu issues from 8100 to 8600, on average (did 30 tests in a row) -8400
There are no problems with sleep, the battery keeps above all praise;)
all sensors work

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Installation method
copy S4502MOD_290913_Mardaly_Full to SD card
reboot into factory recovery
in the recovery menu, select advanced-change enable to disable
In the recovery menu, select the item "wipe data / factory reset"
In the recovery menu, select the Wipe cache partition item and activate it
in the recovery menu, select the item "apply update from external storage"
select the firmware file from the SD card and wait until the installation is completed
Note: if you are migrating from MIUI, LeWa OS, Chinese orAnother firmware mod, it is advisable to do in CWM:
wipe data partition, wipe cache partition, Wipe Dalvik Cache, format system, format data, format cache,

Naturally, before starting CWM, disable the check advanced-change enable to disable (in the factory menu)
Look carefully at the amount of space on the SD card, our device is very picky about SD cards, on some without problems, on others — not in any!

do not forget to say thanks to testersWolf9100,kotlyakov,roverz13
Well, I also tried :)
P.S.If you want to lower the frequency of the processor, in the noFrillsCPU application, after setting the min and max frequencies, go to the settings, set the prevent changes (otherwise the android will not “listen” to the application)!
At 3 users, the touch buttons were not highlighted, it was decided to install the kernel from August 6 (sew from recovery, turn off the check)Attached fileboot_D9_6aug.zip(4.94 MB)

that's who I need to lay out a life preserver from the prog of first necessity, unpack it, drop it onto a sd card, install -Attached filelifebuoy + circle.zip(53.43 MB)


Post has been editedmardaly - 07.05.14, 12:16


--------------------
antahv
Message#53
29.09.13, 15:53
Visitor
**
[offline]

Group: Active users
Messages 23
Check in: 18.06.13

Reputation:-  3  +

mardaly @ 09/29/2013, 10:45 PM*
New firmware! (Edition 2, revised)
S4502MOD_290913_Mardaly_Full (248mb)) MD5 F31886670915160BB15436624C59CCEF


Mardaly, but are there any significant differences from the previous version except for the installed programs? Or it makes no sense to reinstall? But I just installed my programs, and again a new version. Do not hijack you :). Thank you of course.
Avis27
Message#54
29.09.13, 16:18
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 106
Check in: 28.07.13

Reputation:-  14  +

antahv
And why is this necessary? Stitch only to flash? Remove some cons, get some buns and buy other cons ... I don’t know, I am completely satisfied with the stock 1.8 on Buste :-)
mardaly
Message#55
29.09.13, 16:18
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

Mardaly, but are there any significant differences from the previous version except for the installed programs? Or it makes no sense to reinstall? But I just installed my programs, and again a new version. Do not hijack you. Thank you of course.

I have written the Features of my firmware. Well, if the short-busybox, but the DROID RAZR boot, ringtones, dictionaries, sound drivers from the latest innos D9_4.1.2_2050_ V02_02d and Beats Audio (the sound has improved according to testers), all sensors work (see screenshots)
Avis27 @ 09/29/2013, 20:18*
And why is this necessary? Stitch only to flash? Remove some cons, get some buns and buy other cons ... I don’t know, I am completely satisfied with the stock 1.8 on Buste

I do not argue, I have a friend he still has on Windows 2000 WB, he says it suits him. And someone wants more, but for such people and new firmware,tastes differYes, and we have a smartphone as well, not a phone.

Post has been editedmardaly - 29.09.13, 16:23


--------------------
weritos
Message#56
29.09.13, 16:19
Developer
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 4562
Check in: 04.02.12
Oneplus 6 8GB RAM

Reputation:-  2041  +

Are there any significant differences from the previous version except for the installed programs?

I think you can even install on top


--------------------
vim2
Message#57
29.09.13, 18:16
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 157
Check in: 31.08.10

Reputation:-  29  +

New firmware! (Edition 2, revised;))
S4502MOD_290913_Mardaly_Full (248mb))

Who set? Share how it works.
Wolf9100
Message#58
29.09.13, 18:42
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 07.07.10
Highscreen Boost 2 SE

Reputation:-  22  +

works fine: yes2:
mardaly
Message#59
05.10.13, 16:50
Evil and kind
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6205
Check in: 26.01.12
Pocophone F1 6/64

Reputation:-  2995  +

Here are the drivers for our phone, I post it because those in the cap are not suitable for our deviceAttached fileQualcomm_USB_Drivers_For_Windows.msi(6.63 MB)

Use withHow to disable digital signature verification driver in Windows 7
Here's another in the next topic there are drivers with instructions, fit 100% (I checked it myself)
Post with instructions and drivers
Here is another driver from the site dns downloaded (did not check the performance)
Attached fileDNS S4502 USB Driver.exe(3.88 MB)


Post has been editedassasa - 03.02.14, 17:02


--------------------
Raider1972
Message#60
09.10.13, 19:02
stupid and lazy
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 673
Check in: 23.02.10
DNS S4502M

Reputation:-  91  +

Who does not have a radio module (for example, a Chinese is installed, and you can play around with modems) !!!
Replace stock recoveryAttached fileoriginal_recovery_DNS.zip(5.36 MB)

Flash through the recovery with the signature disabled, reboot ....... and flash anything.
Themselves could have long been done ......: rolleyes:

Post has been editedassasa - 03.02.14, 16:59


--------------------
No one will die virgin. The life of everyone will have (c) K. Cobain
youswer
Message#61
30.10.13, 20:52
Have questions? Write to qms.
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1717
Check in: 02.08.13
Lenovo P2 3/32

Reputation:-  254  +

In general, I post my build of a really light version (lite) of 100-meter-long, replacing the launcher with a more advanced one, deleting and replacing sounds for myself, Klava from 2.3.7, removed the extra "garbage" in the form of remnants of a cross between two firmware, With rebuilding apk_ashek, the kernel is native, the last. I use my native radio, the last one. I'm not complaining about the connection ... I added a softphone, I deleted it for myself.
I use the device under the Internet, calls and onFikator, archiver, multi-indicator, well, a calculator ...: D. Screenshots, the service menu comes: D

Are hidden
Picture
Picture

I decided to share:
MD5: 12D72C3C75E7089ABE9590FA30CCFFA6
Download: D
ZY itlight version, that is, everything works: D, the rest can be, and then put ..
ZY.2 I go to the site right now rarely, because. no time.......

Post has been editedassasa - 03.02.14, 16:54
DNS
 

53 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19 18:47