TP-LINK TL-MR3220 - Discussion | [wifirouter] Discussion, firmware, problem solving
Check in: 03.01.14
Sony Xperia X Performance
Share your 3G / 4G connection freedom! The TL-MR3420 N-Series wireless router with 3G / 4G standards allows for sharing of mobile broadband 3G / 4G connectivity via WiFi or an Ethernet cable. By connecting a 3G / 4G USB modem to the router, you can create a Wi-Fi access point in minutes, through which wireless shared Internet access is possible, as well as information and applications on the local network.
Support any modems
Compatibility is the most important point to consider when purchasing a 3G / 4G router. TP-LINK has taken due measures to ensure that the router is 100% compatible with the modems that will be used with it. TP-LINK 3G / 4G routers successfully work with Internet service providers in the regions where they are sold. Worldwide, there are working groups that constantly test new regions with new modems, so users can be sure that their 3G / 4G router will work flawlessly in the region where they live and work.
Supports 3G / 4G and wired redundancy
A distinctive feature of the TL-MR3220 model is support for the 3G / 4G standard and a wired connection with a channel reservation function, so that the connection to the Internet always remains active. Users can specify in the settings the preferred connection mode, one option out of two: 3G / 4G or WAN, the second option will be a backup connection. At the moment it is the only device that offers the possibility of using two types of connections at the same time. This allows you to get a wider range of settings, reduce downtime and save money on payment for connecting to an Internet service provider.
N standard data transfer rate and solid wireless coverage area
The TL-MR3220 router supports the IEEE 802.11n wireless standard and helps deploy a wireless network with data transfer rates of up to 150 Mbps with lower data loss when transmitting over long distances and over obstacles in a small office or large apartment, even in a reinforced concrete building. Moreover, users can easily catch the signal of their wireless network from a greater distance than was previously possible with devices that support the 802.11g standard.
WPA / WPA2 Encryption Modes - Enhanced Security
WEP encryption is no longer considered reliable enough to protect wireless networks. The TL-MR3220 router uses WPA / WPA2 (Personal / Enterprise) encryption modes developed by the WI-FI Alliance industry group, which deals with the compatibility and security of wireless devices for local area networks. WPA / WPA2 encryption ensures protection against any attacks and unauthorized access.
Share via 3G / 4G connectivity
The TL-MR3220 allows working at 4G standard speeds and supports more than 200 models of 3G modems, allowing users to share 3G / 4G broadband mobile connectivity via a wired or wireless connection.
Interface USB 2.0 port for LTE / HSPA + / HSUPA / HSDPA / UMTS / EVDO USB modem
1 10/100 Mbps WAN port, 4 10/100 Mbps LAN ports, auto-Negotiation and auto-MDI / MDIX support
Buttons WPS / Reset Button
On / Off switch wireless mode
Power on / off button
External power supply 9 VDC current / 0.85 A
Sizes (ShhDhV) 204 * 138 * 44 mm
Antenna type Omnidirectional, removable, Reverse SMA
Antenna gain 5 dBi
Parameters of the wireless module
IEEE 802.11g, IEEE 802.11b Wireless Network Standards, with some characteristics of the IEEE 802.11n standard
The frequency range of 2.4-2.4835 GHz
EIRP (Wireless Power)<20 dBm (EIRP)
Wireless Security Support 64/128-bit WEP, WPA-PSK / WPA2-PSK encryption,
Wireless MAC Filtering
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Modulation Technology
QoS (traffic prioritization) WMM
Security NAT and SPI firewalls, MAC address / IP address / packet / application / URL filtering, DoS attack protection, SYN Flooding, Ping of Death
Management Management via web interface (HTTP), Firmware update via web configuration interface
CE, FCC, RoHS certification
Package Contents N Series Router with 3G / 4G Standards
CD with materials
Quick Setup Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux.
Environmental Parameters Operating Temperature: 0 в„ѓ - 40
Storage temperature: -40 в„ѓ - 70 в„ѓ
Relative air humidity during operation: 10% - 90%, without condensation
Relative humidity during storage: 5% - 90%, without condensation
Before flashing / updating your router's software - Recommendations for updating the software of TP-LINK routers, check its hardware version, you can see it on the back of the device.The router version and the firmware version must match!
OpenWrt based alternative firmware for 3G and 4G modems for TP-LINK TL-MR3220 (GoldenOrb)
Latest factory firmware for v1. * v2. *
New updated custom firmware
Actual Firmware GoldenOrb 2017-12-15 Attention! We look the Version of your Router v1. * v2. * Supported Modems here
DD-Wrt firmware themethe forum
FullFlash firmware for programmer Download Ver 1. * Download ver 2.
Updated Firmware GoldenOrb 2018-09-18 Attention! We look the Version of your Router v1 (not yet). * v2. *
Wishes to design themes
Suggestions and suggestions are accepted in QMS.
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
Post has been editedATV59 - 30.11.18, 11:12
Check in: 05.06.11
through the webcam, the router itself comes in as standard admin / admin
The firmware and the router work, but it is recognized as another hardware, in which there is no USB connector
Check in: 11.06.14
It means that you do not do it right once, through WinSCP, it does not allow you to go, google, there are detailed instructions on how to work with routers.
Post has been editedSnaider444 - 11.05.19, 20:44
Group: Active users
Check in: 22.08.17
good day. Tell me, is it possible to enter the TP-LINK TL-MR3220 settings and change the factory password for this router without connecting the network and modem? and how to do it? thank.
Post has been editeduser.com - 13.05.19, 14:17
Check in: 01.05.14
Xiaomi Mi Max Prime
Check in: 11.01.13
[email protected], 18:27
Good afternoon. GoldenOrb 2019-03-10 firmware appeared on V1
Good day! I think it's worth making a hat.
Raspberry Pi 2, Xiaomi Mi Router 3G, TP-Link TL-MR3220 v1, Xiaomi Redmi Note 5, Red Rice 2
Group: Active users
Check in: 19.09.15
good day! there is a 4G modem, firmware GoldenOrb_2018-07-10 (OpenWrt Chaos Calmer r48430) / LuCI, tell me how to open a port by this exampleHMS - Home Media Server (UPnP, DLNA, HTTP) (Post sysinfo # 84774775)
Check in: 01.05.14
Xiaomi Mi Max Prime
[email protected], 19:12
Tell me how to open a port by this example.
in the firewall configuration, you may still need to register the rules for traffic:
if the modem is in hilink, then you must also forward the port on it.
|mobile version||Now: 06/19/19, 06:40|