ZyXEL / ZyXEL Keenetic II and ZyXEL Keenetic Giga II - Discussion | [wifirouter] ZyXEL Keenetic II and ZyXEL Keenetic Giga II Discussion



Rep: (1831)
ZyXEL Keenetic II and ZyXEL Keenetic Giga II- Discussion
ZyXEL Keenetic Giga III - Discussion

Attached Image

Information
Description of models
ZyXEL Keenetic II Description
Product Name: Keenetic II
Part Number: NBG4215-RU0101F
NDM HW ID: kn_rb

Internet center for a dedicated Ethernet line, with a Wi-Fi 802.11n 300 Mbit / s access point, an Ethernet switch and a multifunctional USB host

Internet Center Keenetic II serves primarily for secure and convenient connection of your home to the Internet service provider's network and its services, such as such as IP-TV. It combines home computer equipment in the network and provides the ability to simultaneously surf the Internet from multiple computers or gadgets, play online games, engage in file-sharing networks to connect smartphones, tablets and laptops on Wi-Fi, use TVs with Smart TV function. For guest Wi-Fi-devices can include a separate wireless network with Internet access, but without access to the information in the home network. Built-in firewall Internet center protects all home network devices from attacks from the Internet. In addition, Keenetic II is equipped with a multifunctional 2-port host USB, through which you can organize a permanent connection to the Internet via USB-modem 3G / 4G mobile operator, open network access to the USB-storage device via FTP from the Internet or your home network by the DLNA, as well as provide a general access to the USB-printer with multiple networked devices. Fully self-contained built-in BitTorrent-Client allows the clock to participate in file-sharing networks, freeing your computer from this load.

If it is important for you to have fault-tolerant Internet access, you can organize a reservation of the Internet channel by connecting to several providers simultaneously. If a failure occurs in the network of the main provider, the Internet center will quickly switch to work with a backup channel.

Main features

Internet access and dedicated line provider services
The Keenetic II Internet Center is designed to access the Internet via a dedicated Ethernet line through providers using any type of connection: VPN (PPTP and L2TP), PPPoE, 802.1X, 802.1Q VLAN, IPv4 / IPv6. ZyXEL Link Duo proprietary technology allows home network computers to simultaneously access both the Internet and local provider services on a single dedicated line.
The MIPSВ® 34KEc 700 MHz processor with a network hardware accelerator and optimized firmware provide the Internet center with a high load capacity for working in file-sharing networks such as BitTorrent, allowing you to download files at speeds up to 100 Mbps * for any type of connection.

Wireless Wi-Fi 802.11n 300 Mbps **
Internet Center allows you to organize high-speed wireless network for collaboration on the Internet and home network with laptops, smartphones and any other Wi-Fi IEEE 802.11n standard devices. Two antennas with a gain of 5 dBi provide a wide coverage area of ​​the Wi-Fi network and high quality wireless communications at speeds up to 300 Mbps. For guest devices, you can enable a separate Wi-Fi network designed to access the Internet without accessing information on your home network.
Connecting to a wireless network devices that are compatible with the standard WPS (Wi-Fi Protected Setup), for example, laptops with the Microsoft Windows operating system, can be done at the touch of a button on the Internet center.

Unlimited IP TV
The hardware-implemented TVport technology makes it possible to receive IPTV channels without loss of quality even when downloading torrents or files at maximum speed via the Internet center. To view IP-TV, you can connect one or more IPTV receivers, a computer and laptops working via Wi-Fi without it to additional devices and settings of the Internet center.

Multifunctional USB Host
You can connect a 3G / 4G USB modem, a USB storage device, a USB printer to the Internet center, and all users of your wired and wireless home network can access the connected devices. With a USB drive, you can use an FTP ‑ server and a BitTorrent client that allows you to be in a file sharing network 24 hours a day, freeing the computer from this task.

Home network security and secure operation
A firewall with connection control and protection against attacks provides dual protection for your home network from Internet threats. It does not require configuration and prevents unauthorized access to your computers from the outside. Wireless security is guaranteed by using the 802.11i standard with WPA2 security. The ability to establish VPN connections (PPTP, L2TP) allows you to safely connect to the office network and work at any convenient time at home.

More opportunities for your online projects
With internet center Keenetic II you will be able to realize the most ambitious online projects: open to friends access to your home game, file, or Web server, install the network camera for remote monitoring or even open their Internet radio station. For added convenience, an Internet Point is integrated DynDNS client services and NO-IP. It will allow to connect from the Internet to embedded applications, Internet center and outdoor services home network, using your own domain name, for example my.homeip.net.
The possibility of manual or automatic (via UPnP) port forwarding ensures the full participation of your computers in file-sharing networks, and game consoles - in online games.

* 100 Mbps - the maximum practical throughput of the built-in router, measured in the ZyXEL lab using a BitTorrent client running on a PC in a local network. The actual speed of the file-sharing applications depends on their features and settings, the type of service provided by the Internet provider, the current load on the provider’s network, the data transfer route, and the actions and characteristics of third parties and communication objects.

** 300 Mbps - the maximum speed of work at the physical layer according to the IEEE 802.11n standard when connected to adapters that use two spatial streams and a 40 MHz channel for reception and transmission. The actual data transfer rate in a wireless network depends on the features and settings of the client equipment, the number of clients in the network, the obstacles to the signal path, as well as the presence of other wireless networks and radio interference in the same range.
ZyXEL Keenetic Giga II Description
Product Name: Keenetic Giga II
Part Number: NBG4615V2-RU0101F
NDM HW ID: kng_rb

Internet center for dedicated Gigabit Ethernet line, with Wi-Fi 802.11n 300 Mbps access point, Gigabit Ethernet switch and multi-function 2-port USB host

Internet Center Keenetic Giga II serves primarily for secure and convenient connection of your home to the Internet service provider's network and its services, such as such as IP-TV. It combines home computer equipment in the network and provides the ability to simultaneously surf the Internet from multiple computers or gadgets, play online games, engage in file-sharing networks to connect smartphones, tablets and laptops on Wi-Fi, use TVs with Smart TV function. For guest Wi-Fi-devices can include a separate wireless network with Internet access, but without access to the information in the home network. Built-in firewall Internet center protects all home network devices from attacks from the Internet. In addition, Keenetic Giga II is equipped with a multifunctional 2-port host USB, through which you can organize a permanent connection to the Internet via USB-modem 3G / 4G mobile operator, open network access to the USB-storage device via FTP from the Internet or home network with DLNA as well as provide a general access to the USB-printer with multiple networked devices. Fully self-contained built-in BitTorrent-Client allows the clock to participate in file-sharing networks, freeing your computer from this load.

If it is important for you to have fault-tolerant Internet access, you can organize a reservation of the Internet channel by connecting to several providers simultaneously. If a failure occurs in the network of the main provider, the Internet center will quickly switch to work with a backup channel.

Main features

Access to the Internet and to local provider services on a dedicated line
The Keenetic Giga II Internet Center is designed to access the Internet via a dedicated Ethernet line through providers using any type of connection: VPN (PPTP and L2TP), PPPoE, 802.1X, 802.1Q VLAN, IPv4 / IPv6. ZyXEL Link Duo proprietary technology allows home network computers to simultaneously access both the Internet and local provider services on a single dedicated line.
The MIPSВ® 34KEc 700 MHz processor with a network hardware accelerator and optimized firmware provide the Internet center with a high load capacity to work in file-sharing networks, such as BitTorrent, allowing you to download files at speeds up to 1 Gbit / s *.

Unlimited IP TV
The hardware-implemented TVport technology makes it possible to receive IPTV channels without loss of quality even when downloading torrents or files at maximum speed via the Internet center. To view IP-TV, you can connect one or more IPTV receivers, a computer and laptops working via Wi-Fi without it to additional devices and settings of the Internet center.
Wireless Wi-Fi 802.11n 300 Mbps **
Internet Center allows you to organize high-speed wireless network for collaboration on the Internet and home network with laptops, smartphones and any other Wi-Fi IEEE 802.11n standard devices. Two antennas with a gain of 5 dBi provide a wide coverage area of ​​the Wi-Fi network and high quality wireless communications at speeds up to 300 Mbps. For guest devices, you can enable a separate Wi-Fi network designed to access the Internet without accessing information on your home network.
Connecting to a wireless network devices that are compatible with the standard WPS (Wi-Fi Protected Setup), for example, laptops with the Microsoft Windows operating system, can be done at the touch of a button on the Internet center.

Home Gigabit Ethernet
The Keenetic Giga II Internet Center is equipped with high-speed Gigabit Ethernet network ports (1000 Mbps). This can significantly reduce the time for transferring data between Gigabit Ethernet devices, for example, when backing up files to network storage or transferring large video files and photo albums.

Multifunctional USB Host
You can connect a 3G / 4G USB modem, a USB storage device, a USB printer to the Internet center, and all users of your wired and wireless home network can access the connected devices. With a USB drive, you can use an FTP ‑ server and a BitTorrent client that allows you to be in a file sharing network 24 hours a day, freeing the computer from this task.

Home network security and secure operation
A firewall with connection control and protection against attacks provides dual protection for your home network from Internet threats. It does not require configuration and prevents unauthorized access to your computers from the outside. Wireless security is guaranteed by using the 802.11i standard with WPA2 security. The ability to establish VPN connections (PPTP, L2TP) allows you to safely connect to the office network and work at home at any convenient time.

Internet with your participation
With internet center Keenetic Giga II you will be able to realize the most ambitious online projects: open to friends access to your home game, file, or Web server, install the network camera for remote monitoring or even open their Internet radio station. For added convenience, an Internet Point is integrated DynDNS client services and NO-IP. It will allow to connect from the Internet to embedded applications, Internet center and outdoor services home network, using your own domain name, for example my.homeip.net.
The possibility of manual or automatic (via UPnP) port forwarding ensures the full participation of your computers in file-sharing networks, and game consoles - in online games.

* 1 Gbps - the maximum practical throughput of the built-in router for IPoE, measured in the ZyXEL lab. Actual operation speed depends on the properties and settings of applications, the type of service provided by your ISP, the current load on the provider’s network, the data transfer route, and the actions and characteristics of third parties and communication objects.

** 300 Mbps - the maximum speed of work at the physical layer according to the IEEE 802.11n standard when connected to adapters that use two spatial streams and a 40 MHz channel for reception and transmission. The actual data transfer rate in a wireless network depends on the features and settings of the client equipment, the number of clients in the network, obstacles to the signal path, as well as the presence of other wireless networks and radio interference in the same range.
Additional photo
Additional photo of ZyXEL Keenetic II
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Additional photo of ZyXEL Keenetic Giga II
Model Specifications
Specifications of ZyXEL Keenetic II
Main characteristics

The processor - MediaTek RT6856 700MHz
RAM - 128 MB DDR2
Flash memory - 16 MB
Wi-Fi 2.4 - Yes
Class Wi-Fi - Ralink RT5392 2T2R / 300Mbps
Antennas - 2 x 5 dBi
Ethernet ports - 5 x 100 Mbit / s

Wi-Fi / WPS Button - Yes
FN button - Yes
USB Ports - USB 2.0
3G / 4G connectivity - Via compatible USB modem

Physical parameters

Dimensions - 158 x 110 x 32 mm excluding antennas
Weight - 0.27 kg without power adapter

terms of Use

Operating temperature range: 0 to +40 В° C
Relative humidity: from 20 to 95% non-condensing
Power supply voltage: AC 100-240 V, 50/60 Hz

Diagnostics and control

Web configurator in Russian
Command Line (CLI) by TELNET
The ability to control from the external network (web configurator / CLI)
Backup and restore configuration
Software update features
System log

Equipment

Internet Center Keenetic II
Detachable omnidirectional 5 dBi antenna (2 pcs.)
Power adapter
Ethernet cable
Instructions for use
Warranty card
Specifications of ZyXEL Keenetic Giga II
Main characteristics

The processor - Ralink RT6856 700MHz
RAM - 256 MB DDR2
Flash memory - 16 MB
Wi-Fi 2.4 - Yes
Class Wi-Fi - Ralink RT5392 2T2R / 300Mbps
Antennas - 2 x 5 dBi
Ethernet ports - 5 x 1000 Mbit / s

Wi-Fi / WPS Button - Yes
FN button - Yes
USB Ports - USB 2.0

Physical parameters

Dimensions - 158 x 110 x 32 mm excluding antennas
Weight - 0.27 kg without power adapter

terms of Use

Operating temperature range: 0 to +40 В° C
Relative humidity: from 20 to 95% non-condensing
Power supply voltage: AC 100-240 V, 50/60 Hz

Diagnostics and control

Web configurator in Russian
Command Line (CLI) by TELNET
The ability to control from the external network (web configurator / CLI)
Backup and restore configuration
Software update features
System log

Equipment

Internet Center Keenetic Giga II
Detachable omnidirectional 5 dBi antenna (2 pcs.)
Power adapter
Ethernet cable
Instructions for use
Warranty card
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Configure automatic reboot using CLI TELNET by _Danila_Master_
The purchase and experience of replacing the chip Ralink RT5392 from djgif
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Keenetic Wi-Fi wireless channel change with enpa CLI TELNET
Disabling Virtual IP with enpa CLI TELNET
Configuring OpenVPN in firmware
Installing and configuring Adguadrd DNS in the firmware of Keenetic routers CLI turn from enpa
Experience using TL-ANT2408CL and Keenetic Giga II antennas from sagrus
If the partition does not boot with the file system EXT3?
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
How to configure ipv6 - in conjunction with the Giga II + HiLink modem? by flyfer
Solving the problem of spontaneous rebooting of the Petsoft Keenetic Giga II router
TTL lock
Restore ZyXEL Keenetic
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application
Firmware


The official version of KeeneticOS
Stable unofficial version of KeeneticOS
2.08

2.09

2.10

2.11

2.12

2.13

2.14

2.15

2.16
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.
The program for recovering ZyXEL Keenetic II, Giga II firmware.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 10.09.19, 22:37
Reason for editing: Stable 2.16.D.0.0-0 unofficial version of the firmware from 09.09.2019 to Keenetic II, Giga II



Rep: (1003)
But on the tablet under the android, I just can not configure the printer, even find it.
How do you install the printer driver on android?
>>>The first 3-4 links are enough



Rep: (2)
How to print from phone to printer via Android OS

1. In the Internet Center, configure the printer toJetDirect mode.
2. In the PrintHand application, select Printer Setup - Wi-Fi printer, press the Manual button, enter the printer name, specify the RAW protocol, the IP address is the Keenetic II local IP address.
3. It is also necessary to select a printer driver from the list (it will not work without a driver). After selecting the driver is downloaded from the Internet.
Picture


Post has been editedenpa - 03.05.18, 13:36
Reason for editing: in the header



Rep: (0)
This is a problem with Zyxel LTE6101 routers (1pc) and Zyxel keenektik giga 2 (3 pieces), you need a Zyxel LTE6101 connected to no one to share it with the rest of the routers wirelessly, which are not shared with devices like laptops and mobile phones.
M
Creatureduplicate messagesand so forbidden!


Post has been editedShoore - 18.10.14, 12:31



Rep: (2)
Teraflops @ 04/05/2015, 20:44*
Good evening!
After updating the firmware on the Zyxel Keenetic II, the MTS 827F modem was no longer detected in NDIS mode. Previously, the router saw the modem as UsbLte0. Now defines only as UsbModem0. As I understand it, this means that the modem works in emulation mode of the RS-232 port. Because of this, the ping has increased significantly. Does anyone have old firmware versions for Zyxel Keenetic II?


Good day! There was also such a problem. Long butted with the support and the like. As a result, I asked for the same firmware ... But stably on that firmware does not work ... After about 30 minutes, for some reason, the Internet’s speed drops dramatically. After the reset is restored again ... If interestedherecorrespondence with the developers.

And it ended up altering the modem inHilink, updated KII with the latest version of “06” and now this bundle makes me very happy with the maximum possible speed of the provider (E3372S is mounted in UsbCdcEthernet). The firmware "E3372s-153_Update_22.286.03.00.00_ADB_TLN_01" works more stable (KII does not cut speed).
Picture


Post has been editedenpa - 12.03.17, 13:46
Reason for editing: in the header



Rep: (1)
sm151058 @ 05.05.15, 12:45*
Who has experience, write, what models of disks precisely work with a router the Kinetics 2

WD ELEMENTS PORTABLE -WDBUZG0010BBK
Picture


Post has been editedenpa - 12.03.17, 13:54
Reason for editing: in the header



Rep: (233)
On the latest firmware 2.05 (B8) there is support for USB-Ethernt.
At hand was the Dlink DUB-E100 (revC1) when connected to a PC squeezes out 100 as it should be - since the USB2-Fast Ethernet Adapter.
When checking on the router throughput of this thing:
PC (torrent) ------ (LAN) router (USB-LAN) ------- (LAN) router ---- 100Mbps (Internet)

The download received 70-80% at a speed of 70-75 Mbit / s (according to the monitor of the router itself).
Attached Image


Jan 01 03: 08: 01ndm kernel: usb 1-2: new high speed usb device using rt3xxx-ehci and address 2
Jan 01 03: 08: 01ndm kernel: asix 1-2: 1.0: eth0: register 'asix' at usb-rt3xxx-2, ASIX AX88772 USB 2.0 Ethernet, xx: xx: xx: xx: xx: xx


Who has experience using these things, and the question itself when using for example a device with a chip such as AX88179 - USB3.0 to 10/100 / 1000M Gigabit Ethernet Controller, but will there also be a speed increase in the USB2 router to at least 150 Mbps. The Fast Ethernet Controller is integrated into the 88772, and the Gigabit Ethernet Controller is integrated into the 88179.
http: //www.asix.com.tw...ail&PItemID=131; 71; 112

Post has been editedenpa - 09.06.17, 15:08



Rep: (799)
* Alex502, and in logs did not look that writes at the time of check?!.
Something tells me that they can skip the following errors:
Core :: System :: UConfig: key not found: servicetag.
or
UPnP :: Manager: unable to read a service tag.
or something like that... ;)

Post has been edited_Danila_Master_ - 09.08.15, 21:59



Rep: (799)
* Alex502, Well, congratulations, you lost the data in the mtd1 memory section, which stores the uboot settings, including the "Service Code" and "Serial Number".
2 Recovery Options:
1. We carry the Router to the service center and there it will be restored to you (these are software jambs, therefore, it can be considered as a warranty case)
2. Do everything yourself. But you need to know what you are doing ...;)
That's what he wrote about itDr.Acid in one known forum: tyts .

My advice to you is to consider option 1.: yes2:

Post has been edited_Danila_Master_ - 09.08.15, 23:54



Rep: (799)
* Alex502,
The entire memory of the router is logically divided intosections(for example, memory Zyxel Keenetic).
In the block of interest to us (mtd1 - U-Config - uboot settings ) recorded service code and serial number of your router (the one on the back of the sticker).

The “firmware” makes a request to the update server, and it compares the available servicetag and serial in its mtd1 block with its database, and if a match is found, it sends information about the available updates (no updates). It also gives permission to update additional components, after which you can upload custom firmware to the router.

And since the data in the block is missing, it means that there is no data about updates, and therefore there is no possibility to update additional components.

Post has been edited_Danila_Master_ - 10.08.15, 18:07



Rep: (799)
So I wrote - put v1, connect flash, install entware (get access to the router), save the mtd1 partition in any convenient way (or program).
everything is already merged and looked: yes2:
As expected, everything is ruined there - only the beginning of the block is alive, and the rest is erased by the FF, incl. and the area where zyxelsn = 0000000000000 and servicetag = 000000000000000 should have been registered
Attached Image

Therefore, the person asked to give someone's mtd1 block as a sample, in order to enter his codes there (you can score your codes in advance with zeros)

Post has been edited_Danila_Master_ - 24.08.15, 15:52



Rep: (233)
_Danila_Master_
Therefore, the person asked to give someone's mtd1 block as a sample, in order to enter his codes there (you can score your codes in advance with zeros)

As a sample, he already has one, this copy of the block lies in mtd0 - already twice the search for variables, starting withbootcmd and up test_tftp plus the variables themselves
bootcmd = tftp bootdelay = 5 baudrate = ............. 8A100000 root.cramfs; run test_tftp
then come those variables and endlastwanip
... test_tftp sernumb = Shhhhhhhhhhhh servicetag = hhhhhhhhhhhhhhh country = RU wlanssid = Keenetic-xxxx wlankey = xxxxxxxx xxxxxxxx wlanwps = servicepass = hhhhhhhhhhhhhhh ctrlsum = afbehhhhhhhhhhhhhhhhhhhhhhhhh25a lock = lastwanip = hh.hh.hh.hh ....

the length of this mtd1 = 65536

And what shows V2 in the diagnosis:
<! - show defaults ->
<servicepass>***************</ servicepass>
<wlanssid>Keenetic-xxxx</ wlanssid>
<wlankey>xxxxxxx</ wlankey>
<wlanwps>xxxxxxx</ wlanwps>
<country>Ru</ country>
<ctrlsum>afbehhhhhhhhhhhhhhhhhhhhhhhhhhhhh25a</ ctrlsum>


Post has been editedbalian007 - 24.08.15, 17:04



Rep: (799)
As a sample, he already has it, this copy of the block lies in mtd0 - already two times the search for variables, starting with bootcmd and before test_tftp
and the variables that are in the mtd0 bootloader and that are (partially remaining) in mtd1 do not match, for comparison:
ofmtd0 :
bootcmd = tftp bootdelay = 3 baudrate = 57600 ethaddr = "00: AA: BB: CC: DD: 10" ipaddr = 10.10.10.123 serverip = 10.10.10.3 ramargs = setenv bootargs root = / dev / ram rw addip = setenv bootargs $ (bootargs) ip = $ (ipaddr): $ (serverip): $ (gatewayip): $ (netmask): $ (hostname): $ (netdev): off addmisc = setenv bootargs $ (bootargs) console = ttyS0, $ ( baudrate) ethaddr = $ (ethaddr) panic = 1 flash_self = run ramargs addip addmisc; bootm $ (kernel_addr) $ (ramdisk_addr) kernel_addr = BFC40000 u-boot = u-boot.bin load = tftp 8A100000 $ (u-boot) u_b = protect off 1: 0-1; era 1: 0-1; cp.b 8A100000 BC400000 $ (filesize) loadfs = tftp 8A100000 root.cramfs u_fs = era bc540000 bc83ffff; cp.b 8A100000 bC540000 $ (filesize) test_tftp = tftp 8A100000 root.cramfs; run test_tftp

ofmtd1 :
bootcmd = tftp bootdelay = 5 baudrate = 57600 stdin = serial stdout = serial stderr = serial ethact = Eth0 (10/100-M) ethaddr = 00: AA: BB: CC: DD: 10 ipaddr = 192.168.1.1 serverip = 192.168. 1.2 u-boot = k2_uboot.bin bootfile = k2_recovery.bin ramargs = setenv bootargs root = / dev / ram rw addip = setenv bootargs $ (bootargs) ip = $ (ipaddr): $ (serverip): $ (gatewayip): $ (netmask): $ (hostname): $ (netdev): off addmisc = setenv bootargs $ (bootargs) console = tty

As they say, feel the difference and guess what the entered commands will lead to ...

I tend to think thatyou need exactly the native mtd1 block ZyXEL Keenetic II otherwise it will be done on "if only it works, but let the end user worry about the glitches" ...

And what shows V2 in the diagnosis:
<! - show defaults ->

but nothing shows that it is clear:
</ tz>
<! - show defaults ->
<! - show dot1x ->
<! - show drivers ->


Post has been edited_Danila_Master_ - 24.08.15, 22:50



Rep: (799)
Balian007 @ 08.28.2015, 12:58*
You about what, see below and remember the post.
instead of empty disputes, which are essentially offtopic, lay out the "normal" block mtd1 (if you have one) with the "correct" structure and overwritten serial numbers ...
This is essentially necessary at the moment !!! : thank_you:
(And taking block 0 and pulling all the variables into block 1 with “handles” is a thankless and wrong task - to isolate which ones are needed and which are not ...: no :)

Post has been edited_Danila_Master_ - 28.08.15, 14:59



Rep: (233)
_Danila_Master_ @ 08.28.2015, 13:17*
_Danila_Master_

On account of some disputes, this is not for me, the question was asked
The question then about what glitches ????? can we talk if these variables are used for ?????
No answer, but oh well.
Specifying what you can say about the variable
ctrlsum = 32xxhhhhhhhhhhhhhhhhhhhhhhhhhhh656

the same zeros. For information at the moment, I personally do not see the need for this undertaking, since it does not make sense. To replace (as easier) you need to put V1 and not only her. For example, V1 has not been supported for a long time, but at the same time it continues to work faithfully and faithfully, i.e. without updates for many years and not what.



Rep: (799)
Balian007 @ 08.28.2015, 15:22*
The question then about what glitches ????? can we talk if these variables are used for ?????
No answer, but oh well.
well, just insist ... :)
I will say right away that I did not set up experiments (there was no need or desire), but I can state my thoughts on this ...
Here, the difference in the values ​​of variables (based on the remaining data in the overwritten mtd1):
mtd0
ipaddr = 10.10.10.123
serverip = 10.10.10.3
console = ttyS0 ...

mtd1
ethact = Eth0 (10/100-M)
ipaddr = 192.168.1.1
serverip = 192.168.1.2
u-boot = k2_uboot.bin
bootfile = k2_recovery.bin
console = tty ...


In the bootloader:
serverip = 10.10.10.3 serves purely for recovery purposes.http://zyxel.ru/kb/2146- What will happen if you use this data without changing? I would like to believe that, at best, it will just be necessary to reconfigure through a web interface ...
ethact = Eth0 (10/100-M) is missing What do you think, will a WAN be configured immediately?!. ;)
There are no links to u-boot = bootfile = But in general, will the router start up in normal mode without them?

All the other variables, I unfortunately can not compare, due to the erased ... But even with this difference it is clear that "stupid to make copy-paste" is wrong. But to understand what is needed and what is not and what exactly to register (about missing data unknown to me) is not the case ...

Specifying what you can say about the variable
ctrlsum = 32xxhhhhhhhhhhhhhhhhhhhhhhhhhhh656
- the same zeros?
no, not zeros. I can assume that it (as the servicepass = variable in the 1st kinetics mtd1-block) is generated independently after the first check for updates from the WEB interface, so it does not need to be entered at all.
At least when restoring mtd1 on a Zyxel Keenetic router, I entered only the serial and serviskod, and then again I dumped the block — the servicepass variable = was added after them on my own ... Perhaps there is a similar situation; need to be checked experimentally.
at the moment I personally do not see the need for this undertaking, since it does not make sense ... To replace it, you need to put V1 and not only it ...
except for firmware v1, as a temporary solution to access the router as root and write a single script to a USB flash drive - nothing else is needed at all.
Link tothe waygave.
And what exactly is for you! there is no need to do it - well, thanks to that ...: rolleyes:

Post has been edited_Danila_Master_ - 28.08.15, 17:45



Rep: (233)
_Danila_Master_
10.10.10.123 native to Ralink (according to the SDK), any of 192.168 ...... from the developer’s company, but we want to be different.
Eth0 This is the name of the switch bus interface on which all network ports sit. ;)
Switch settings where what port of WAN and LAN occur in uboot by setting reg. chip, then he and uboot.
void LANWANPartition (void)

If desired, it is possible in the firmware itself if the user needs to rebuild something in the network ports all of a sudden.
Aboutconsole uboot provides the opportunity if the router’s boot process suddenly “buggy” or the user has uploaded the erroneous firmware, then you can boot in any available way that is compiled into uboot - TFTP, serial (consol) or even from the USB port. With the console cable connected to the corresponding. the connectors of the router board and the PC, i.e. in the first 3 seconds after switching on when the console cable is connected, press Ctrl-C then we will get into the menu (screen in uboot below)
Attached Image

what it looks like in real life, the essence of which is to drive the firmware into the necessary section into the router.
....
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.

You choosed 2

0
2: System Load Linux Kernel then write to Flash via TFTP.
Warning !! Erase Linux in Flash then burn new one. Are you sure? (Y / N)
Please Input new ones / or Ctrl-C to discard
Input device IP (10.10.10.123) ==: 10.10.10.123y
Input server IP (10.10.10.3) ==: 10.10.10.3y
Input Linux Kernel filename () ==: prosh_file_name
....


_Danila_Master_ except for firmware v1, as a temporary solution to access the router as root and write a single script to a USB flash drive - nothing else is needed at all.

It was such a solution often used for 620-Keenetic.

_Danila_Master_
And what exactly is for you! there is no need to do this - well, thanks to that ...

No problem.

Post has been editedenpa - 09.06.17, 15:07



Rep: (32)
Configuring a connection to a working VPN server using a "gray IP" at the provider


Previously used function DyDNS, because the home provider gave dynamic "white" address. Suddenly, we have changed the provider (the old provider has gone bankrupt and all its assets and customers transferred to another provider). Now type the address of steel 10.x.x.x, DyDNS stopped working and the ability to connect to your home network with the work I was gone. I had to go in the opposite direction and raise the tunnel is not working with the machine, and from the home Keenetic. The task is simple, but to raise the PPTP directly on the kinetics I failed. Carrier-BRAS not take GRE-traffic and cut it. Realizing blockage new provider with the change of equipment, customers transfer to the new conditions of service, etc., solved the problem by yourself:

1. Create the necessary PPTP connection on the Internet tab ->"PPPoE / VPN";
2. Received a new interface PPTP0;
3. Requiredcorrect MTUfor this interface, to bypass the limitations of provider BRAS on GRE traffic (it works for me with MTU = 1400) and save the changes;
4. Now the VPN connection is established;
5. Add the necessary routes;
6. Do not forget to configure access to the Internet center from the PPTP0 interface.

PPTP0 settings
! Interface settings
interface PPTP0
description KHTI
peer WORK_IP
no ipv6cp
lcp echo 30 3
ipcp default-route
ipcp name-servers
ipcp dns-routes
no ccp
security-level public
authentication identity USER
authentication password ns3 PASSWORD
ip address dhcp
ip dhcp client dns-routes
ip dhcp client name-servers
ip mtu 1400
ip access-group _WEBADMIN_PPTP0 in
ip tcp adjust-mss pmtu
connect via PPPoE0
up
! Access to the online center from work
access-list _WEBADMIN_PPTP0
permit tcp 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 port eq 80
permit tcp 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 port eq 139
! Work routes to access work machines from home
ip route 192.168.20.0 255.255.252.0 192.168.23.1 PPTP0 auto
! DNS from work
ip name-server 192.168.23.2 "" on PPTP0
ip name-server 192.168.23.3 "" on PPTP0
!
ip static tcp PPTP0 80 192.168.200.1 80! inKHTI
!

Screenshots
Attached Image

Attached Image

Attached Image

Attached Image

Picture


Post has been editedenpa - 09.06.17, 16:00
Reason for editing: In the Hat



Rep: (799)
* 88987,
there in the logs people connect via the WPS function ... Is this so important or is someone hacking you?!. ;)
If you do not have WiFi printers, etc. that connect only via the WPS code, then I would advise you to disable everything connected with it in the settings of the router, and connect by entering a password.

[email protected], 22:11
What is it? Servistag flew?
Yes. Do not tell me how to recover? Writes Updates: Connection Error
if there is something like this in the logs:ZyXEL Keenetic II and Keenetic GIGA II - Discussion
only then worry about restoring the servistag.
Recovery options:ZyXEL Keenetic II and Keenetic GIGA II - Discussion
You can hardly pull it yourself, because technical support will not upload all the necessary files and full recovery instructions ...;)



Rep: (0)
* _Danila_Master_,
please explain to me what exactly i need to disable in the router?
It will be used only as a router and not more.



Rep: (799)
* 88987,
articleWPS on the router - what is it and how to use it...
Item "ZyXel Turning off wps" ...
You can continue to read the next paragraph of the article "The vulnerability of WPS technologies"


Full version    

Help     rules

Time is now: 27/09/19, 18:05