[X]Assistant

[_Enemy]

DiscussionExplay N1
Explay N1 Tablet
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

useful links

Install Google Play

Photo disassembled tablet
Wi-Fi switch in the blind
Sound enhancement

Recovery firmware

Instructions on firmware
Instructions for installing firewood and firewood themselves
CWM installation
Android 4.2.2 JellyBean CookedRom v1.3aa For A13 Allwinner
FaaastJB v2.5 - A13 Allwinner with Jelly Bean 4.2.2 by Toxicro.
Firmware from EXEQ P-702
Official firmware

There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.

Post has been editedgrafom - 30.06.18, 04:55

Reason for editing: Sound enhancement

[_Enemy]

http: //forum.xda-devel...owthread.php? t = 2343531
And here is the topic with cyanogen, firewood under it and others are attached, there is also CWM, now there is no plan on hand, I can not try
If anyone decides to try, do not forget to make a backup!

[mits85]

How to get home I'll try to flash the cyan.

[mits85]

Install CWM Recovery.
Get root (I usedhttp: //savagemessiahzine.com/forum/d…5831/android_root.exe)
Download the fileCWMRecovery, Rename it to recovery.img and dump it on the tablet. Then installhttp: //savagemessiahzine.com/forum/d..l+Emulator++1.0.54.apk, we start terminal and we enter in command line:
su
there will be a request for rights superuser'a - allow
then we enter
dd if = / sdcard / recovery.img of = / dev / block / nandg
After that, you can boot into recovery (volume down + power button if it does not work - hold the volume down, press the power button, release the power button and then release the volume and immediately press again)

Post has been editedmits85 - 05.02.14, 11:22

[mits85]

Cyanogen, the link to which threw offEnemy, does not start. I tried in different variations.
Maybe someone will come in handy:
gc0329 - camera module
gslx680 - sensor module
mxc 622x - g-sensor

Post has been editedmits85 - 05.02.14, 12:13

[_Enemy]

very sorry, but now the names of the modules are known

[_Enemy]

After searching for the marking from the photo presented by the distinguished mits85, I found a pair of matches, namelyhttp://azpenpc.com/ProductSupport55.html, hereThe process of Azpen a701 firmware is presented, which seems to be like an analogue of our plate, here is the page with the firmware, which one of the a701 I don’t know, so who can experiment,http://www.mediafire.com/azpensupport
All the manipulations you do at your own peril and risk!
do not forget to backup!

[mits85]

I understand - it does not start because of the markup, or the kernel does not have a driver for our nand chip. Well, at least on our tablet there is an official firmware - so you can not be afraid of problems with partitioning sections.

Posted 05/02/2014 12:34:

Sew this linkhttp://www.mediafire.com/azpensupportThere is no sense - there is a version android 4.0.4. Now I'm sitting with the second version of the mod on the link respected Enemy.

Post has been editedmits85 - 05.02.14, 12:31

[_Enemy]

Unfortunately, I do not have a tablet in my hands, I can not try it myself, is the cyan installed and it does not start or is not installed at all?
You can try to look for firewood under nand, only labeling is needed

Posted 05/02/2014, 12:37:

mits85 @ 05.02.2014, 13:34

Sew this linkhttp://www.mediafire.com/azpensupportThere is no sense - there is a version android 4.0.4. Now I'm sitting with the second version of the mod on the link respected Enemy.

why it makes no sense, there is A701 with DC port 2013-06-05 4.2 jellybean.img

Posted 05/02/2014 12:40:

it’s generally strange that the original planner isn’t located, because I don’t think that Explay was created and assembled by it, anyway, it was written off from some Chinese

[mits85]

Cyan is sewn, but it does not start - a black screen. Now I try to install FaaastJB v2.5 - the camera doesn’t work there, but there’s such a camera that you can safely live without.

Posted 05/02/2014 13:38:

Add to the cap - a link to the support with the official firmwarehttp://support.explay.ru/product/295

[mits85]

FaaastJB v2.5 is not flashed with any version of the live suit - every time it gives an error. In this case, the official is poured with a bang.

[_Enemy]

can through phoenix?
Does the official work?

[mits85]

The official perfectly sews and works, but FaaastJB v2.5 does not. Now I will try from azpen 701 - it's almost done (524 MB).

[_Enemy]

mits85 @ 05.02.2014, 15:25

The official perfectly sews and works, but FaaastJB v2.5 does not. Now I will try from azpen 701 - it's almost done (524 MB).

then, if it is not difficult, throw off the link to the firmware and a brief instruction how to flash it, pick it up in the cap

[mits85]

Unfortunately, no firmware was installed: angry: We'll have to "finish" the native.

[_Enemy]

So is the official from azpen working?

[mits85]

Not. Markup error.

[_Enemy]

sorrow, then I give up (

[mits85]

Now I am trying to modify my native firmware. Honestly, I have never done this before, but suddenly it will work out. ;)

[mits85]

I disassembled the firmware, corrected the config, which is responsible for selecting the frequency / voltage of the processor (it will work as expected at 1200 MHz). Removed trash, changed the launcher, added the market. Tonight it remains to figure out how to build back into the .img file. So wait and wish me luck;) In extreme cases, lay out as backup for CWM.

Post has been editedmits85 - 06.02.14, 09:29

[v_alex_v_texet310]

Good luck!