[X]Assistant

[_Enemy]

DiscussionExplay N1
Explay N1 Tablet
Description | Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

useful links

Install Google Play

Photo disassembled tablet
Wi-Fi switch in the blind
Sound enhancement

Recovery firmware

Instructions on firmware
Instructions for installing firewood and firewood themselves
CWM installation
Android 4.2.2 JellyBean CookedRom v1.3aa For A13 Allwinner
FaaastJB v2.5 - A13 Allwinner with Jelly Bean 4.2.2 by Toxicro.
Firmware from EXEQ P-702
Official firmware

There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.

Post has been editedgrafom - 30.06.18, 04:55

Reason for editing: Sound enhancement

[DimsonSan]

I in general bore the guys with grief in half, but I don’t understand, there is no playmarket, no curtains on top. Why is this so? Is this firmware or stitching?

[DimsonSan]

All figured out)

[Fibcasper]

How on it Imei return?

[Fibcasper]

Stepped :)

[AL197105ALEX]

Please tell me why you need an extra connector under the loop, it is located near the connector of the display cable of the tablet exply1n plus.

[py4ek]

[quote name = "DimsonSan" date = "10/11/17, 11:24 PM" post = 65899720]
All figured out)
how did, the same trouble

[py4ek]

how was it done? does not find the device

[tuguzzz]

Android 4.2.2 JellyBean CookedRom v1.3aa MR1 For A13 Allwinner

Link to firmware: CookedRom v1.3aa MR1

Installation Instructions:

1) Install the firmware via LiveSuit (as official).
It becomes without dancing with a tambourine.

that helped me thanks

[konsvet]

faced with the strangeness of his native android.
In the internal memory there is a folder / mnt / sdcard, where he takes the application (if in the settings of the "Application" click "Transfer to SD-card") - that is, stupidly tosses between the internal folders. Lucky Patcher does everything the same way. :(
And he calls the external SD card as / mnt / extsd and does not transfer anything from the Android tools to it.
Can this be fixed somehow? There is no room in the internal memory already ...

Post has been editedkonsvet - 17.04.18, 18:34

[Userleon]

Hello! Recently I became the owner of this tablet. If someone else has it and does not arrange the sound, you can take an inexpensive usb dac-zhilai h1 on pcm2704. On Ali, you can buy. The player downloaded and installed Onkyo HF Player, he saw a DAC. Planche worked well with the DAC. The sound is good (the equalizer is not needed !!!), bass, middle, top, everything is in place. Only good headphones and recordings are needed, and you can also tamper with the line-in amplifier, it will not disappoint)) Sound like a CD player)) The frequency range is full, from 20-20.000 Hz.

Post has been editedgrafom - 30.06.18, 04:55

Reason for editing: In the header

[Stalky174]

Lord experts. attention issue.
I tried to flash this miracle tablet. Suite does not see it connected. Firewood rose, there is firmware, it can not flash. Says there is no suitable device.
On the advice of this topic looked in devices, USB Device (VID_1f3a_PID_efe8) there is no such ...
Tell me what to do. I will be at much grateful

[leshik7777]

Hello! Tell me what to do Livesuit does not start ... I tried different versions!

Attached images

[Userleon]

Stalky174
Leshik7777,
read from this post to the end of the topic, I think it will help (there are not many pages) Drivers are needed not from Explay but those that are in the livesuit folder:
DNS AirTab E76 - Firmware (Post UserLeon # 53012463)

Post has been editedUserleon - 15.07.18, 21:52

[just-seva]

Friends! Hello. There is a tablet Explay N1. He rested on the Explay screensaver and reboots cyclically.
Is it possible to flash it through an SD card?

Nowhere is this mention found ...

[just-seva]

I managed to flash from the SD card to the firmware version EXEQ P-702.

But how to flash up to version 1.00 now I have no idea ... I'm sewing through the SP Flash Tool. He does not want to reflash and that's it. Rises as rooted to the very last step ...

Maybe I do not know something? Features of the firmware of this model?