[X]Assistant

[ctich]

Asus RT-N12 - Discussion
RT-N12 (B1, C1, D1, VP, VP B1), RT-N12HP (B1), RT-N12LX, RT-N12E (B1, C1), RT-N12 + (Plus) (B1, PRO)

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.
  

A photo:

Specifications:

wiki table with all RT-N12 models

Firmware and instructions:

ASUS Firmware Restoration emergency recovery utility:

Instruction:

Step-by-step instruction in pictures

1. First you need to download and install it from here:ASUS Firmware Restoration 2.0on Asus website
   
2. Go to the properties of the network card and manually enter the addresses: IP address 192.168.1.10, subnet mask 255.255.255.0, main gateway 192.168.1.1
   
3. Turn off the router button
   
4. Insert the network cable into any LAN port
   
5. Hold the reset button (next to the power button) for 10 seconds
   
6. Holding the button down, turn on the router
   
7. When the power indicator flashes slowly - the reset button can be released
   
8. Open our utility, select the firmware file and flash

[ModelsRT-N12 B1, C1, D1, HP, HP B1 and VPhardware identical.Use the recovery utility to install the firmware not on your revision]

AsusWRT:
Of Asus firmware for the entire RT-N12 line
RT-N12 D1 3.0.0.4.380.8291- according to reviews the most stable
Asuswrt-Merlin RT-N12 VP 3.0.0.4_378_4129- firmware from R. Merlin based on the official one, which contains bug fixes, performance optimization and additional functions
Full dump desktop RT-N12 B1, merged by the programmer

Firmware from those. Asus support:
RT-N12[A1]: 7.0.2.41a
RT-N12C1: 3.0.0.4_378_9479
RT-N12VP: 3.0.0.4_380_8162

Tomato, DD-WRT, Padavan, OpenWRT

Tomato:

• Installation Instructions Tomato 1.28 v.140 on RT-N12 D1
  
• Installation instructions for Tomato 1.28 v.140 on RT-N12 B1, C1, HP and VP
  DD-WRT:
  
• Wiki section RT-N12 with instructions for [A1], B1, C1, HP, VPandseparate explanations for D1andHP B1
  Versions for future updates are laid out:here, hereandherein the broadcom_K26 / and broadcom_K3X / folders
  Padavan:
  
• Padavan 3.4.3.9L-100 for RT-N12VP B1(RT-N11P B1) Dec 29, 2018 (sewn from -099)
  
• Padavan 3.4.3.9-099 for RT-N12VP B1(RT-N11P B1)
  Ubuntu firmware commands
  OpenWRT:
  
• OpenWRT 18.06.2 for RT-N12 [A1], B1, C1, D1 and HP (Not recommended for use- limited FLOSS driver)
  
• OpenWRT 06/18/26 r9427 / LuCI Master for RT-N12VP B1(RT-N11P B1, RT-N12E C1 and RT-N12 + B1) with LUCI and MWAN3 (luci-app-mwan3) [WiFi works, ipv6 support is cut out]
  
• OpenWRT 06/18/26 r9672 / LuCI Master for RT-N12VP B1(RT-N11P B1, RT-N12E C1 and RT-N12 + B1) with LUCIwithout MWAN3 (luci-app-mwan3)[WiFi is working, cut ipv6 support]

Instructions:
Configuring Asus RT-N12VP B1for Internet + IPTV FTTX Rostelecom
Reassigning WAN to LAN port on Tomato

Topics Curator: Aramir_

Post has been editedAramir_ - 15.04.19, 16:37

Reason for editing: Rewritten.

[Dag05tabas]

Burbon1981,yes and all.
Download, set, and everything will be ok. The speed does not cut and works like a clock. New firmware (last and only) for revision VP - slag full. Here is a working one.

https: //www.dropbox.co…2917-gd3441fb.trx? dl = 0

[Alex27398]

On the Asus RT-N12e router, firmware 2.0.0.37, permanently disconnect in WoT. Without him, there is no such thing. In support Asus they write that the router is weak, its iron does not pull and because of this problem. What can be done with this piece of plastic so that there are no disconnects?
Or what can be answered by the support service?

Post has been edited-SunLion- - 30.01.15, 00:20

Reason for editing: Combined posts

[utrus]

Revision VP firmware 3.0.0.4.378_2917 through the wire the speed of all the norms as well as at the rate of 60 mb / s and on Wi-Fi cuts 35 mb / s is it possible to make that thread so as not to cut

[tezzzon]

Greetings to you dear! I decided to buy Asus RT-N12, going to the off. I was surprised by the number of modifications to this router. What kind of modification do you think is the most problem-free, and which can be taken with confidence?
P.S. I take on the replacement of tp-link 941nd.

Post has been editedtezzzon - 31.01.15, 00:54

[yan14062001s5570]

I bought RT-N12VP a couple of months ago, and now the Internet has started to go intermittently, it does not allow settings, writes nonsense, like the settings have been updated ...... Is there a DD-WRT on it?

Posted 02/01/2015, 17:06:

tezzzon,
Take Zuhelka better, I worked for 4 years, recently the board burned down and I had to take it .....

[John_White]

tezzzon,
No, then the problems will be above the roof. From Asusov, you can RT-N11P or RT-N14U plus custom firmware from Padavan. From Pixels - Omni or Lite II.

[Dev @ st @ tor]

Colleagues, good afternoon. Yesterday this is the problem. Router RT N12 - d1. firmware 3.0.0.4.376.3754. Connected to PC via cable, all other devices via wifi. Until yesterday evening, everything was fine, now the Internet is only on PC. Neither the tablet nor the smart connect to wifi (there is authentication and that's it). The question is, what could be the reason? And how to overcome it?

[sm1l_e]

Hi everyone!)) friends got this question asus RT-N12 VP, last firmware, the problem is that the speed cuts almost twice ((
heard you can fix the problem by installing the firmware tomato-K26-1.28.RT-N5x-MIPSR2-117-Max.trx
Can someone use it and tell me if it's worth it, no ??
: thank_you:

[gagik72]

Tell me if this router supports ads (this is via a telephone cable) l Rostelecom?

Post has been editedgagik72 - 05.02.15, 19:11

[-SunLion-]

gagik72
if there is an adsl modem, then any router will work including this one.
This router has no built-in adsl modem, so it will not work alone

[JUST_GOD]

Hello guys, everyone! There is a route Asus RT-N12 D1. Tell him an alternative firmware, plz. I can not find. For B1, C1 is, but for D1 I do not observe ...

[Alex27398]

[email protected], 17:23

Hi everyone!)) friends got this question asus RT-N12 VP, last firmware, the problem is that the speed cuts almost twice ((
heard you can fix the problem by installing the firmware tomato-K26-1.28.RT-N5x-MIPSR2-117-Max.trx
Can someone use it and tell me if it's worth it, no ??

In any case, the attempt - not torture. If anything, it will be possible to return the old one.

[vinil19]

Hello, everyone. The people tell me a stable firmware or which one is better to install so that without glitches on asus rt n12 d1 thanks in advance.

[GoRelick]

Someone tried to install this firmware:Merlin? Very interesting reviews!

Post has been editedGoRelick - 16.02.15, 15:24

[vinil19]

Will anybody answer me? A few days ago I bought it and I don’t know which one passed, doesn’t cut the speed and works stably so that the wi-fi doesn’t fall off and tell me which position to put the antennas so that the normal signal passes through the room.

M

Check outForum Rules!
4.13. It is forbidden to raise the topic. Namely, the publication of messages aimed at only raising the topic on the list and not bearing a semantic load, for example: “Does nobody really know?” Or “an!”.

Post has been edited-SunLion- - 18.02.15, 08:47

[B3PbIBHuK]

GoRelick,

[email protected], 13:38

For those who suffer from the router - I found the firmware from Merlin. It works fine and there are a lot of great ivy in it. I use mod7c to take here

[-SunLion-]

vinil19,
And most for a few days, no leisure was to test the firmware?!
About antennas - the signal propagates in the plane perpendicular to the axis of the antenna.

[antojgo]

Hello colleagues on the router
I have an ASUS RT-N12VP at home
Home Internet comes over the LAN cable and enters the switch, with one cable going to the TV set, the second to the router, from it already going to the computer.
connects via PPPoE
Yesterday the Internet was gone, the router can not log in, sends a login password and that's it. I connected the computer directly, under the same login / password, everything works fine, and the router does not like
I tried to switch sockets in the switch, the same song: the computer is working, and the router is not
reset the settings on the router, updated the firmware to the latest

who prompts where to dig?
provider Rostelecom, Rostov region
win 7 x64

Post has been editedantojgo - 19.02.15, 08:42

[bostvl]

[email protected], 07:35

Yesterday the Internet was gone, the router can not log in, sends a login password and that's it. I connected the computer directly, under the same login / password, everything works fine, and the router does not like
I tried to switch sockets in the switch, the same song: the computer is working, and the router is not

I had the same problem. The provider said that my asus is not able to connect via PPPoE as it should (especially in new firmware).
Try to call the provider. If they have changed the configuration, then this is the same case :(
Exit - change the firmware (can someone tell me which one ???) or change the router.

[antojgo]

I came home yesterday, tried to change the poppy address - did not help
I called the TP, I was told that I was trying to log in with the wrong password, although the password has not changed since connection
in the end I set up the router again and connected successfully
I understand that something has changed at the provider, but they did not want to recognize it as usual