Assistant
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
PocketBook 614 | E-ink pearl |
Message#1 21.12.13, 09:03 | |
Reader [online] Group: Honorary Gameday Messages 40856 Check in: 03.01.06 Samsung Galaxy S9 Exynos Reputation: 3901 | DiscussionPocketBook 614 Discussion | Description PocketBook introduced a new budget reader PocketBook 614 User's manual ������� ����� � �����! � �� ���� ����� downloadsystem !!!
Originalmessageauthor, thank youvitendo Install CoolReader Firmware 4.4.604 from 02.11.2014https://yadi.sk/d/SSA4wQRLcb4Nx 4.4.662 from 03/18/2014https://yadi.sk/d/5jL8zahFcb4um 4.4.1217 dated 11/20/2014https://yadi.sk/d/_KvxLLcZd2gUk 4.4.1773 from 10.02.2017http: //download.pocket…14_1773_-sync_user.zip ATTENTION!!! On firmware 4.4.1773 CoolReader stops working (up to pro5) The firmware process can be run like this: 1. Download the firmware and unzip the contents of the archive (SWUPDATE.BIN file) to the root folder of the microSD card (recommended) or internal memory. 2. Go to: Settings → Device Information → Software → Software Update (Settings → About Device → Software → Software update) 3. Follow the instructions on the screen. If the firmware file of the same or older version than is installed in the device, it will be deleted automatically and the firmware will not start. In this case, it is recommended to flash the device manually. Manual update: 1. Download the firmware and unzip the contents of the archive (SWUPDATE.BIN file) to the root folder of the microSD card (recommended) or internal memory. 2. Turn off the Device by pressing the On / Off key. 3. Press and hold the buttons.< Back and > Forward. Turn on the device by pressing the On / Off key. 4. Hold the buttons< Back and > Forward until the message “Firmware update” appears on the screen 5. Follow the instructions on the screen. The device checks available update sources in the following order: microSD card, internal memory of the Device. E-book disassembly Replacing the internal memory card Screen replacement Frequently asked Questions
Post has been editedvadeus - 26.11.18, 07:48 Reason for editing: Screen Replacement |
Message#2 22.01.14, 18:56 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 524 Check in: 14.04.13 Asus ZenFone Max ZC550KL (MSM8916) Reputation: 8 | Custom firmware will be? |
Message#3 22.01.14, 19:21 | |
Reader [online] Group: Honorary Gameday Messages 40856 Check in: 03.01.06 Samsung Galaxy S9 Exynos Reputation: 3901 | vuglusker Not. -------------------- PocketBook 632/623/903, Phones: Siemens CX65>Qtek 2020i>Motorola l7>Mitac Mio A502>HTC Hero>Philips W732>SGS 5 Mini (LTE)>SGS 6>SGS9. PDA: HP iPAQ hx2110>Gpad g11>Nexus 7 3G>SGT Pro 8.4 LTE + SGT S 10.5 (wi-fi). |
Message#4 18.02.14, 16:06 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 92 Check in: 09.09.10 Reputation: 5 | and nekastomnye? I did not find the firmware from the manufacturer |
Message#5 18.02.14, 16:10 | |
Reader [online] Group: Honorary Gameday Messages 40856 Check in: 03.01.06 Samsung Galaxy S9 Exynos Reputation: 3901 | Shameless Married Dogs, Onoff the site. -------------------- PocketBook 632/623/903, Phones: Siemens CX65>Qtek 2020i>Motorola l7>Mitac Mio A502>HTC Hero>Philips W732>SGS 5 Mini (LTE)>SGS 6>SGS9. PDA: HP iPAQ hx2110>Gpad g11>Nexus 7 3G>SGT Pro 8.4 LTE + SGT S 10.5 (wi-fi). |
Message#6 18.02.14, 16:38 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 92 Check in: 09.09.10 Reputation: 5 | [email protected], 17:10 Shameless Married Dogs, On off. site. and true. a week ago was not yet. well, thank you cho;) upd: firmware 4.4 from 02/12/2014: 1. Optimized processes of power consumption of the device (input / output accelerated move the device from sleep mode). These are all changes ... can add a flash?link to firmware Post has been editedShameless Married Dogs - 18.02.14, 16:42 |
Message#7 18.02.14, 17:42 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | For those who are not satisfied with the native FBReader program on the reader. How to install CoolReader: Link In my instructions, for example,built-in memory readeris listed as drive z: Installation Instructions: Download version for models 611/613/614/622/623/624, etc. Unpack the system folder from the archive along with all its contents into the root of the internal memory. Since the root of the internal memory is already present hidden system foldersystemthen after unpacking the contents from the archive will be added to its subdirectories. It should turn out like this: cr3-pb.app must be inz: \ system \ binand in the catalogz: \ systema folder will appearsharewith a cr3 folder inside. Now we specify, with the help of which program to open the selected formats: Create a filez: \ system \ config \ extensions.cfg In it we indicate which formats are opened by default by which application. If your config folder is empty, most likely the reader is configured to use multiple user profiles. In this case, the extensions.cfg file will be on the wayz: \ system \ profiles \ profile_name \ config \ extensions.cfg It is enough to register only for those formats that we want to open through CoolReader. For the rest, the default settings are saved. The application listed first is the default. To open a file through another program, it’s enough to select open in the context menu of the file with - and choose what to open it with. The system folder in the root of the internal memory is hidden and system. To see it, turn on hidden and system files in Explorer or use third-party file managers, where you also need to enable hidden and system files. An example of the contents of my extensions.cfg file: epub: @EPUB_file: 1: cr3-pb.app, fbreader.app: ICON_EPUB fb2: @ FB2_file: 1: cr3-pb.app, fbreader.app: ICON_FB2 This technique does not affect the firmware at all, and is therefore safe. Even if you do something wrong, and you will stop opening files, it will be enough to delete the filez: \ system \ config \ extensions.cfg ( z: \ system \ profiles \ profile_name \ config \ extensions.cfgfor multi-configuration) with built-in memory to return everything to its original state. I put CoolReader on this technique immediately on the day of purchase of the reader, I have been using it for several weeks, and I do not plan to return to FBReader. A ready system.zip archive containing the latest configured version of the Cool Reader is attached to the message. It is intended for cases when you do not want / do not have time to figure out how to put the program on the reader, or something does not work. Copy this archive to the root of the disk.internal memoryreading room. And select unzip to current folder. This option is for a single-profile configuration, which most often occurs. If you have multiple user profiles, copy the file fromz: \ system \ config \ extensions.cfgatz: \ system \ profiles \ profile_name \ config \ extensions.cfgafter unpacking. Attached files system.zip(3 MB) Post has been editedEXGNF - 21.12.15, 19:21 Reason for editing: Updated the archive from CoolReader to the current version. -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#8 21.02.14, 16:12 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | Guys, by chance through Ultraiso I started recording windows on the reader: rofl: quickly canceled, but now the reader has restored the head. settings and on the timing and hour. region writes: Could not set time zone And again returns to the choice of language. Post has been editedSmokeGG - 21.02.14, 16:16 |
Message#9 21.02.14, 17:45 | ||
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | I went again to flash, the same thing. Post has been editedSmokeGG - 21.02.14, 17:47 | |
Message#10 21.02.14, 18:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | Guys, by chance through Ultraiso I started recording windows on the reader: rofl: quickly canceled, but now the reader has restored the head. settings and on the timing and hour. region writes: Could not set time zone And again returns to the choice of language. In your case, it was not necessary to start reflashing. It is enough to format the internal memory. A reset to the factory settings and a time zone failure was expected - after all, these settings are stored in files on the built-in memory. Try this: Settings - Advanced Settings - System - Formatting Internal Memory -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#11 21.02.14, 19:24 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | I formatted but gave nothing. Fat 32 / default cluster. formatting through the reader itself was not possible because after selecting a region, it returned to the choice of language. After decided to flash, but gave an error. Post has been editedSmokeGG - 21.02.14, 19:25 |
Message#12 21.02.14, 20:14 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | I formatted but gave nothing. Fat 32 / default cluster. formatting through the reader itself was not possible because after selecting a region, it returned to the choice of language. After decided to flash, but gave an error. When the reader is connected to a computer in drive mode, right-click on the Computer - Control icon. In the menu on the left, select disk management. Show a screenshot of what is displayed for the reader’s memory. -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#13 21.02.14, 21:17 | ||
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | When the reader is connected to a computer in drive mode, right-click on the Computer - Control icon. In the menu on the left, select disk management. Show a screenshot of what is displayed for the reader’s memory. Thank you for responding =) Post has been editedSmokeGG - 21.02.14, 21:19 | |
Message#14 21.02.14, 21:31 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | Try formatting with this:Link It is seen that the structure of the section is slightly different. In the normal state, the partition should not be marked Active. Perhaps because the reader refuses to work with memory. Or maybe the built-in memory is uniquely mounted by the firmware, taking into account the disk label. You now have 614, whereas when formatting, the device itself is assigned Pocket614. Try to rename, suddenly the snag will be in this;) If it fails, you can try utilities for working with disk partitions like Acronis Disk Director, etc. or try to format via tablet by connecting the reader through an OTG cable. Or try to find instructions on how to make a hard reset for this model. Usually it is an inclusion with certain clamped keys, which starts the full formatting mode of the internal memory, but I'm not sure that this model supports this. Well, the last option remains - write to the manufacturer’s technical support. Maybe they will advise that. Post has been editedEXGNF - 21.02.14, 21:38 -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#15 21.02.14, 21:39 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | |
Message#16 21.02.14, 21:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | |
Message#17 21.02.14, 21:42 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | |
Message#18 21.02.14, 21:47 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | The truth is the file system Fat16, but if the reader starts, then you can always reformat from it. Post has been editedEXGNF - 21.02.14, 21:58 -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#19 21.02.14, 21:48 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | |
Message#20 21.02.14, 21:50 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 266 Check in: 09.02.11 Xiaomi Redmi 6A Reputation: 55 | This is just an internal memory. Given that you have a reader, and so can not use it, I think it will not become worse. Especially FAT16 standard, which at least on memory cards reader must be able to understand. But again, try after other ways will not help. Do not start with this method. In any case, if you know how to work with Acronis Disk Director, it is better to try not only to format and re-create the partition in memory. Create a primary partition with the FAT32 file system and do not make it active and do not put other attributes. Post has been editedEXGNF - 21.02.14, 21:54 -------------------- Xiaomi Redmi 6A PS4 Slim CUH-2108A |
Message#21 21.02.14, 21:52 | |
Visitor [offline] Group: Active users Messages 27 Check in: 24.02.12 Gigabyte GSmart G1310 Ray Reputation: 1 | Got it. By the way, I see the firmware file only on a flash drive, it does not find it on the phone. |
mobile version | Now: 04/28/19, 21:27 |