Sailfish for Nokia N9 | port for n9



Rep: (472)
Sailfish for Nokia N9


Russian video review of the port Sailfish for Nokia n9

As many know, there are already several successful attempts to port Sailfish OS to the Nokia n9 device.
The first releases began to appear on the network about two or three weeks ago, there are already several builds.
The main point of the installation is to install Nemo Mobile, and install Sailfish from under it.
Every day more and more accessible installation instructions appear, the installation process is simplified ...
The Russian-speaking community is also dealing with this issue ... Soon we will have all this ...

for now ... we haveoriginal instruction with durability
It is also below the spoler (for now without links):
http://wiki.maemo.org/Sailfish- Wiki article is a work in progress, you can find helpful!

Piratepad, rzr, souran, Martin Brook, vgrade, mikecomputing, TMavica, krnlyng (liar), max83, flotron, folklore (who I don’t know of!), Trying to make sailfish happen for the n9, people jolla phones, jolla, nemo


Read all before starting! No warranty! Assumes some basic Linux knowledge.

NB: I use Debian 7.2 x64, root terminal on a virtual machine (vmware, should work fine too,https://www.virtualbox.org/). Any distro will do. I strongly recommend that you use Internet connectivity on your linux machine). For windows only, follow the guide then use Step W (thanks mikecomputing)

NB: Completely turn off the power button for ~ 8 seconds.

NB: When extracting a tarball with "tar --numeric-owner -xvf", it is probably .tar.bz2 -xvjf "

NB: Lack of jolla-xt9 means no engine and no pinyin>hanzi conversion for Chinese speakers.

Resources

Firmwares:http://skeiron.org/firmware/N9/40.2012.21.3/orhttp://mrcrab.net/nokia/Nokia_N9.htm...uctType=RM-696

openmode kernel:http://www.swagman.org/juice/ubiboot...openmode_l2fix

MOSLO kernel:http://releases.nemomobile.org/snaps...xx.armv7hl.rpm

ubiboot:http://wiki.maemo.org/Ubiboot, http://www.swagman.org/juice/ubiboot/ubiboot-02/

Souren's sailfish for n9:http://n9.araya.su/images/mic_images...0.1.10/vgrade/

Additional reading materials / sources:
http://www.who.is.free.fr/wiki/doku.php?id=n950club
http://piratepad.net/nVuyI2uxrY



Step 1 - Backup your N9
Backup your N9 (using the Nokia Suite or the phones in the utility) AND your emmc (connect you N9 in data storage mode) !!
1a - Connect your phone as you need the inbuilt utility.
1b - Close all your open applications. I would like to backup /home/.config, /home/.local and /home/.whatsup Use N9QuickTweakhttp://talk.maemo.org/showthread.php?t=80600, option H, enable SSH for root. WinSCP / Filezillahttp://winscp.net/eng/index.php https://filezilla-project.org/
1b - BACKUP YOUR BACKUPS

Step 2 - Re-flash the firmware to factory
Download firmwares from:http://skeiron.org/firmware/N9/40.2012.21.3/orhttp://mrcrab.net/nokia/Nokia_N9.htm...uctType=RM-696
2a - Make sure the handset is charged. Disconnect from all cables and turn off completely.
2b - download it for your system and install it. You want v3.12.1.http://skeiron.org/tablets-dev/maemo-dev-env-downloads/
2c - Copy your firmware files to the directory where the flash files and emmc files respectivelyhttp://wiki.maemo.org/Flashing_N9for more info if needed.

NB: It can be completely turned off by initiating a flasher command and connecting it.
"flasher -i" is the environment.
2d - fs cmd.exe / run cmd.exe as admin (win) or go to the directory where you are.
2e - Flash your firmware with the command "flasher -F main.bin -F emmc.bin -f" (no quotes)

2z - IF FLASHING FAILS (PARTITION MISMATCH, SIMLOCK ON: CANNOT FLASH UNSIGNED IMAGE, NO REPLY FROM PING ETC.) TRY THIS. I HAVE DONE IT MULTIPLE TIMES AND NOT NOTICED ANY CONSEQUENCES BUT I TAKE NO RESPONSIBILITY IF YOU PERMA-BRICK!


Completely turn off the handset.
Start flasher with the following command: "flasher -f -F main.bin --erase-user-data = secure -F emmc.bin --erase-mmc = secure" (no quotes)
It should take you time.

************************************************** **********************************

IF YOU ARE ABIT IMPATIENT (LIKE ME) FISHING THAN TURN OFF THE PHONE COMPLETELY.
GET A MESSAGE ASKING GOUT YOU TO INSTALL AN AUTHORIZED OPERATING SYSTEM.
TURN IT BACK OFF.
RUN: "flasher -F main.bin -F emmc.bin -f" (no quotes) AND IT SHOULD FLASH FINE
************************************************** **********************************

Step 3 - Give your handset freedom via openmode!
3a - Download the openmode kernel fromhttp://www.swagman.org/juice/ubiboot...openmode_l2fixand your firmware files.
3b - Flash the openmode kernel and reboot your phone with:
"flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only = kernel -f -R" (without quotes)

Step 4 - Prepare Harmattan
4a - set up and it is fully functional.
4b - Install developer mode (it is useful later on).
4c - (Optional) Install N9QThttp://talk.maemo.org/showthread.php?t=80600, and enable option H (enable ssh for root). (Copy & paste easily)

Step 5 - Re-partition your handset
5a - Turn off your hand set. If you have not already been a linux machine / vm (you can download it on your host PC).
5b - Download the MOSLO kernel (http://releases.nemomobile.org/snaps...xx.armv7hl.rpm)

If you don’t want to download windows, download the kernel file from here:http://www.multiupload.nl/WLLK09RF96flash it using "flasher -k zImage-moslo -n initrd-moslo -l -b" (no quotes), then jump to Step W

5c - Extract the .rpm with archive manager or:
"rpm2cpio moslo - *. armv7hl.rpm | cpio -vidu" (you may need to install rpm2cpio [apt-get install rpm2cpi]). Copy directory with eminc.bin and zImage_2.6.32.54-openmode_l2fix
5d - Flash the MOSLO kernel to your phone with:
"flasher -k zImage-moslo -n initrd-moslo -l -b" (no quotes)

After flashing, it will repartition you N9 and connect it to the PC.

You can nitdroid and firefox os.

Disconnect the phone.

Step 6 Install Ubiboot and Sailfish
6a - Download ubiboot fromhttp://www.swagman.org/juice/ubiboot/ubiboot-02/(ubiboot-02_0.3.5_301013.tar as of 2013-12-08) into the directory where flasher, main.bin and emmc.bin reside.

6b - Now install the ubiboot kernel with:
"flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only = kernel -f -R"

Ubiboot to enter maintenance mode.

Partitions are "rootfs" (Harmattan root filesystem) "Alt_OS" (where nemo / sailfish lives) "x767x676x7c6" (a random string of letters +/- numbers. OS if you want and is " / home / "in Harmattan but NOT" / home / user / MyDocs ") and" Nokia N9 "(THIS is" / home / user / MyDocs "on Harmattan [USB Mass Storage Mode]).

NB: If you format it, it will get a random string of letters and numbers, like the "/ home /" directory. It is the 4.2GB file system.

6c - Go to "/ media / Nokia N9" on your PC (Harmattans Mass Storage). Make a directory called "boot". Copy "ubiboot.conf" and "ubiboot-02.menus.cpio" from the extracted ubiboot-02_310513.tar into the newly created "boot" folder.
6c Go to "/ media / rootfs" Harmattans root file system. Go to the "boot" directory (/ media / rootfs / boot). Copy "zImage_2.6.32.54-openmode_l2fix" (which we flashed earlier) into "/ media / rootfs / boot").

6d - download the image of choice (or make one using the sdk and "sailfish2-armv7hl-n950.ks", but I don’t go into that. Checkhttp://martinbrook.blogspot.co.uk/20...-been.html?m=1, https://wiki.merproject.org/wiki/Platform_SDKandhttps://github.com/martinbrook/jolla-n950-kickstartfor more info if interested.

Download Sailfish from:http://n9.araya.su/images/mic_images...0.1.10/vgrade/(vgrade-sailfish_proximity-workaround.tar.bz2) (no zypper v1.0.0.10)

Update: An image is also available fromhttp://www.mediafire.com/download/zj..._0_0_5.tar.bz2(please seehttp://talk.maemo.org/showpost.php?p...&postcount=443)- Thanks max83 This image has been pre-installed and is sailfish v1.0.0.5

6e - Extract Sailfish to "/ media / Alt_OS" on your PC with:
"time tar --numeric-owner -xvjf vgrade-sailfish_proximity-workaround.tar.bz2 -C / media / Alt_OS /"

Step W - Install Sailfish using only Windows (thanks mikecomputing)
After installing your device. Disconnect and boot into Harmattan.
Wa - Download Sailfish image of choice
Wb - In Harmattan, install developer mode if you haven't already. Connect the phone as "Mass Storage Device"
Wc - Copy vgrade-sailfish_proximity-workaround.tar.bz2 to the root of your MMC.
Wd - Disconnect the phone from the PC.
We - Launch Terminal on Harmattan (or SSH in)
devel-su
rootme #or your root pass
cd / home / user / MyDocs /
ls
# you should see all your MyDocs and vgrade-sailfish_proximity-workaround.tar.bz2

mkdir / sailfish
mount / dev / mmcblk0p4 / sailfish
time tar --numeric-owner -xvjf vgrade-sailfish_proximity-workaround.tar.bz2 -C / sailfish /
# this will take a while
# SSH access on Sailfish, starting at "mount -o bind / proc / sailfish / proc"

Please read his post:
http://talk.maemo.org/showpost.php?p...&postcount=436

Sync the disks and unmount all the filesystems:
"sync; sync; sync; umount / media / *"

(To upgrade to a new image, simply delete everything in / media / Alt_OS ("rm -frv / media / Alt_OS / *"). You will loose your data!

Disconnect your USB cable and turn off the handset completely. Turn it back on. This is where the bootmanager is available and you can download the OS 6, of which the sailfish and harmattan work.

If you do not select an OS, Harmattan will boot by default.

To tap into the Sailfish, tap the nemo icon and the tap "the latest 2.6.32" or "vmlinuz-2.6.63.20120129.1.1-n950". For Harmattan, it is "openmode + l2 fix"

Date / Time Fix

The date / time may not be set correctly in Sailfish. To fix this, boot into Harmattan and fire up terminal:

$ devel-su
# rootme # (or ur root root pass)
# date --set "2013-12-07 22:59"

Enable root ssh access on Sailfish

ZYPPER IS NOT INSTALLED ON SOURAN'S LATEST IMAGE SO IGNORE ATM, UNLESS YOU ARE USING MAX'S IMAGE!

To fix the proximity sensor (thanks to souran), you need to fix it. This is pretty easy to get (thanks to liar (krnlyng) on ​​piratepad):

Fire up a terminal Harmattan.
devel-su
cd /
mkdir sailfish
mount / dev / mmcblk0p4 / sailfish
mount -o bind / proc / sailfish / proc
mount -o bind / sys / sailfish / sys
mount -o bind / dev / sailfish / dev
/ usr / sbin / chroot / sailfish
su
passwd root
nemo #enter a root pass
nemo #confirm root pass
passwd nemo
nemo #enter pass for nemo
nemo #confirm nemo pass

# will be needed, some will use vi
# now lets enable root ssh in sailfish
#this also allows copying files to and from sailfish with winscp / filezilla

nano / etc / ssh / sshd_config
# add the following somewhere
PermitRootLogin yes
# exit: ctrl + x, y to save changes

# you can also install any additional packages such as terminal now as perhttp://www.who.is.free.fr/wiki/doku.php?id=n950clubandhttp://piratepad.net/nVuyI2uxrYe.g .:
zypper install \
jolla-alarm-ui jolla-calculator jolla-calendar jolla-clock jolla-configuration-n9 \
jolla-demo jolla-developer-mode jolla-development-tools jolla-email jolla-fileman \
jolla-mediaplayer jolla-notes jolla-rnd

exit

umount / sailfish / dev
umount / sailfish / proc
umount / sailfish / sys
umount / sailfish
exit #out of su
exit #out of chroot
reboot


Reboot you phone and enjoy ssh / terminal on your Sailfish!


Note: When in developer mode, DO NOT ENABLE FRAME RATE DISPLAY. It makes it impossible to disable it. To fix, delete everthing in /home/nemo/.gconf/*

It may be in:
/home/nemo/.gconf/desktop/lipstick-jolla-home/gconf.xml
or
/mnt/home/nemo/.gconf/desktop/gconf.xml

Proximity sensor fix

To fix the proximity sensor (thanks souran & eekkelund, must be done every boot)
In sailfish terminal:
su
nemo
echo 1>/sys/devices/platform/i2c_omap.2/i2c-2/2-0039/prox_enable

as well as machine translation:http://paste.ubuntu.com/6550303/
and my arbitrary -INSTRUCTIONS
Fresh images are: HERE
For dessert: screenshots
Attached Image
Attached Image
Attached Image


Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image




References that must be read before installation:
TMO
MaemoSU
AllNokia

Post has been editedAlexxxl - 13.12.13, 02:36



Rep: (28)
Wow, this is hardcore. But I will definitely put it on the second nine. Well done. And just as good is the idea of ​​installing on android devices of this OS, this is a prospect.
If there are maniacs who master to deliver, throw a video instruction.)



Rep: (1)
at the same time you will make and take screenshots and write what you need)



Rep: (472)
Well, yes .. although the vidos in the cap is exhaustive ..
By the way, I ran into a problem ... the sailing ship is being loaded, but the migo does not want to



Rep: (256)
Alexxxl @ 12.12.2013, 11:24*
screenshots you make

There is no screenshot if the image was not put on top of Nemo.



Rep: (472)
I started everything, everything works, .. today I will try to concoct a tool on my knee)) while the memory is fresh ...



Rep: (256)
I'm already full of my subject I saw off, after watching live on Sailfish :)



Rep: (472)
Salfish Installation Instructions

So ...
A freestyle and very fluent toolkit (I will still “brush” it), which I wrote on the basis of TMOShnaya, as I understood it, and in the end I set myself a sailboat.
I don’t give guarantees, but in theory everything should work))) In fact, this is a translation of a TODAY instruction with a bit of excess and some corrections. We put the Sailboat without using ubunt (or another Linux) .. we do everything from under Windows!

So: we read to the very end, thoughtfully, trying to understand what is being done and why, then a couple more times and go ...

Step 1 - Backing up everything we need. Merge all valuable. contacts pictures, all the ways available to you.

Step 2 - We reflash the phone to the factory native firmware with a full cleaning ... The phone should work out of the box, clean ...
downloadhisfirmware - for example from herehttp://skeiron.org/firmware/N9/40.2012.21.3/orhttp://mrcrab.net/nokia/Nokia_N9.htm...uctType=RM-696
Download the flasher (normal or graphical. Interface, but better than normal ..)
and flash - command line syntax: flasher -F main.bin -F emmc.bin -f (where main.bin is the firmware file, emmc.bin content file)
in neighboring topics a lot of information about flashing.

Step 3 - We sew Open Mod
but. Preventing Warranty Cancellation Report:
- execute the following command in the terminal (on behalf of the user):
Code
disclaimer-cal remove View-openmode
b. You must disable the PIN request on the SIM card.
at. For the system to work correctly after flashing the kernel, it is necessary to remove the account settings and security logs. This will delete all the accounts you created. After flashing, they will need to be manually recreated.
- execute the following commands in the terminal (on behalf of the user):
Code
rm -rf /home/user/.accounts
rm -rf /home/user/.activesync
rm -rf /home/user/.aegis
d. Make sure the "Security Code" is not set.
e. Download zImage -Attached filezImage_2.6.32.54-openmode_l2fix.zip(2.41 MB)

e. We sew, ... command line syntax: flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only = kernel -f -R

Step 4 - Prepare Harmattan.
We turn on the phone (after reflashing in the previous paragraph), boot up, set up all the original parameters of the date, time, etc.
If possible, we put a tweaker and do a H-1 tweak (enable SSH for root) is not necessary, but I did.

Step 5 - Repartitioning sections.
Download the archiveMOSLO kernel Attached filemoslo-0.0.13.2-1.5.Nemo.Adaptation.N9xx.armv7hl.zip(15.13 MB)
, the contents of the archive we throw everything in the same folder in the flasher and sew again)))
Command line syntax: flasher -k zImage-moslo -n initrd-moslo -l -b
after executing the command we are not in a hurry to disconnect the phone from the computer ... we are waiting for the strpper to be loaded (a bunch of incomprehensible green inscriptions on a black background), at this moment there is a repartition of the section ... 4 gigabytes under the sailboat is bitten off by the MayDox ... (I should note that there is very little space on the 16GB version)
when everything has become static and nothing happens, the inscriptions do not change (well, 2 maximum3 minutes ) You can disconnect the phone from the computer ... rebutil the phone, the MiGow familiar to us is loaded)) everything is fine .. everything is according to plan ...

Step 6 - install Sailfish
-We download the image of Sailfish, for example, this -http://n9.araya.su/images/mic_images...0.1.10/vgrade/
- we are loading as usual in Harmattan (up to the very last point, everything will look as usual)
- connect in drive mode and upload the downloaded image to the MyDocs folder - vgrade-sailfish_proximity-workaround.tar.bz2, disconnect the phone from the computer.
- in Harmattan we turn on the developer mode and go to the terminal (or connect from the computer via SSH)
- in the terminal code:

devel-su
rootme (# well, or what is your password)
cd / home / user / MyDocs /
ls
(# the command will display the contents of the MayDox folder, should see our image there - vgrade-sailfish_proximity-workaround.tar.bz2)

mkdir / sailfish
mount / dev / mmcblk0p4 / sailfish
time tar --numeric-owner -xvjf vgrade-sailfish_proximity-workaround.tar.bz2 -C / sailfish /
# begins unpacking the image .. take 5-7 minutes,Please note that the toolkit contains the image of "vgrade-sailfish_proximity-workaround.tar.bz2", but you could download another one (if you were puzzled by the latest download at the moment), for example "vgrade-sailfish_proximity-r3.tar.bz2" accordingly, the command needs to specify this particular image file name, otherwise it will simply curse that there is no such file.
# as the code will end further ...


mount -o bind / proc / sailfish / proc
mount -o bind / sys / sailfish / sys
mount -o bind / dev / sailfish / dev
/ usr / sbin / chroot / sailfish
su
passwd root
nemo # asks you to create an admin password .. enter (I hammered in a standard rutmi)
nemo # asks to repeat the invented admin password, enter
passwd nemo
nemo # asks for a password for the user, enter
nemo # repeat ... code further

zypper in nano
nano / etc / ssh / sshd_config
# After entering this command, the text editor "nano" opens; it can pick and spoil everything (c)))
We need to take this line (without quotes):
"PermitRootLogin yes" and insert a new line anywhere in the text
# exit: ctrl + x, click Y to save the changes. code further:
optional
# these commands (which are in this spoler) are not required, and are relevant only for the image with the working zypper `
zypper install \
jolla-alarm-ui jolla-calculator jolla-calendar jolla-clock jolla-configuration-n9 \
jolla-demo jolla-developer-mode jolla-development-tools jolla-email jolla-fileman \
jolla-mediaplayer jolla-notes jolla-rnd

exit
exit
# no typo, two times hit "exit" 1-exit from under su 2-exit from chroot ... code further:

umount / sailfish / dev
umount / sailfish / proc
umount / sailfish / sys
umount / sailfish

reboot

the body reboots, .. and loads in normal mode .. we see a moment))) ... nothing new, .. but actually somewhere inside the sails are already being straightened))) Pu essentially remained the last step .. correctly install ubiboot, but not everyone can do it normally, in part because in many instructions they don’t describe what for and why, but simply write “install ubiboot” meaning that you know how to do it ... As an example, I didn’t describe in detail how flash smart .. you need to be able to (learn how to do this in the next topic) if you want a sailboat)))

so...
Step 7 - extreme ...

Alternative method
You can use a separate instruction and config fromAncelad, everything is painted in a special topic -Multiboot for Nokia N9


- download the last ubiboot -Attached fileubiboot-02_0.3.5_131213_SFOS (1) .tar(18.02 MB)

we unpack 7Zip-ohm insides
We get 4 files:
This README.txt
md5sums.txt
zImage_2.6.32.54-ubiboot-02_301013
ubiboot_035_sailfishos.tar

-copy zImage_2.6.32.54-ubiboot-02_301013to folder with flasher
-copy ubiboot_035_sailfishos.tar toMydocs phone
- go to the terminal on the phone and code:
Code:
devel-su
rootme
cd / home / user / MyDocs /
ls
see the list of files and see there ubiboot_035_sailfishos.tar
code:
tar -xvf ubiboot_035_sailfishos.tar -C /
we get the result:
/home/user/MyDocs/boot/ubiboot.conf
/home/user/MyDocs/boot/ubiboot-02.035_SF_v1.cpio
/boot/zImage_2.6.32.54-openmode_l2fix
/ sbin / preinit_harmattan


turn off the phone.
sew: flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only = kernel -f -R

After completing the command, turn off the lace, you should see the graphic boot-menu (only 2 icons from the OS and one more icon below with the information.)
To start Migou, do not touch anything, or choose the Migou icon
To launch a sailboat, select the sailboat icon
does not start immediately .. 20-30 seconds, we can observe a black screen.

everybody ... Welcome aboard!

obsolete
- download the last ubiboot fromhttp://www.swagman.org/juice/ubiboot/ubiboot-02/(ubiboot-02_0.3.5_301013.tar as of 2013-12-08)Attached fileubiboot-02_0.3.5_301013.tar(22.14 MB)

we unpack 7Zip-ohm the insides we throw in the folder with the flasher, until we sew))
- download preinits.tar -Attached filepreinits.tar(30k)
http://www.swagman.org/juice/ubiboot/other/preinits.tar
- we throw preinits.tar on the phone in MyDocs
- go to the terminal on the phone and code:
devel-su
rootme
cd /
mkdir boot
tar xvf /home/user/MyDocs/preinits.tar -C /
cd / home / user / MyDocs /
mkdir boot
- connect the phone to the computer, all from the same archive (downloaded a little earlier) ubiboot-02_0.3.5_301013.tar take the files "ubiboot.conf" and "ubiboot-02.menus.cpio" and put in / home / user / MyDocs / boot
- put the zImage_2.6.32.54-openmode_l2fix file in the MyDocs folder (we downloaded it in Step 3 of this instruction)
- disconnect the phone from the computer, open the terminal in the phone, code:
devel-su
rootme
cp /home/user/MyDocs/zImage_2.6.32.54-openmode_l2fix / boot

- turn off the phone from the computer and turn off

- sew ubiboot:
in the folder with the flasher we already have files from the archivehttp://www.swagman.org/juice/ubiboot/ubiboot-02/ubiboot-02_0.3.5_301013.tar, in particular zImage_2.6.32.54-ubiboot-02_301013, we need to fill it with ...Attached filezImage_2.6.32.zip(11.31 MB)

so just do another firmware syntax:
flasher -a main.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only = kernel -f -R

everything...

After executing the command, turn off the lace, you should see the graphic boot-menu ...
To start Migou, do not touch anything, or choose the Migou icon and then zImage_2.6.32.54-openmode_l2fix
To launch the sailing ship, select the Nemo icon (on the left third), not the sailfish icon, but it is not! does not start immediately .. 20-30 seconds, we can observe a black screen.



If anyone found a mistake. there is an inaccuracy or there is simply an addition - click on the complaint so that I can promptly make amendments ...
thank wall637for rewritten piece about ubiboot

Some additions ... important too!
- If something went wrong with ubiboot, for example, Migou doesn’t load, or the axis doesn’t load at all ...
do not panic and do not make hasty movements, you can always jump to a simple OpenMod core with just a command in the flasher: flasher -a main.bin -k zImage_2.6.32.54-openmode_l2fix --flash-only = kernel -f -R
at the same time, the sailing ship will not go anywhere, we will simply change the core and we will have a standard MiG boot ...

- With images of a sailboat, you can re-itement (for example, going through those that are in the network) for etono you do not need to do everything from the very beginning ...
It is only necessary to repeat Step 6 using another image file (download the flash, drop the image into the phone, unpack it through the terminal, reboot and select the sailboat), naturally, in the command for unpacking the image we indicate the current image file name

- in the sailboat DO NOT TURN the graphics settings in the settings section of the screen - the screen will float with artifacts! There is a cure, if that. See the instructions.
- there are also a number of fixes, for example, for the proximity sensor that does not work in some images! There is a cure, if that. See the instructions.



How to roll back:

in fact, in order to demolish the sailboat and return the sections to their original appearance, we simply repeat the 2nd paragraph of the above instructions ... i.e. We are flashing native firmware with content and data cleaning ...

Post has been editedAlexxxl - 28.01.14, 09:40



Rep: (1)
Does everything work including android emulation?



Rep: (66)
Pavel325400 @ 12.12.2013, 15:35*
Does everything work including android emulation?

no, emulation does not work, the camera does not work, GPS, accelerometer and not all programs are installed from the store



Rep: (472)
Pavel325400 @ 12.12.2013, 16:35*
Everything is working

meant lower things ... Mogou runs, sales fish are started)))
came out in a less regular mode of operation))

Post has been editedAlexxxl - 12.12.13, 16:20



Rep: (1)
Already progress, but it is better to wait for a full assembly :).



Rep: (70)
sailfish-1.0.1.10 / 10-Dec-2013 00:44 is it an extreme image or is it fresh? Please describe who is installed, in detail, what does not work (or what works if there is less)



Rep: (3)
I even wanted to buy n9, can I order it with aliexpress?



Rep: (472)
wall637,
link to the images in the header. last r3
Yes, a lot of things still do not work and tupit .. it is impossible to use on a daily basis ...
There is no zhps, there are no cameras, applications are flying out .. and a lot of small things ... even yesterday I managed to tie the native gTalk into the network .. but could not send any messages to anyone,. contact sheet stupidly did not appear
the only thing you can do is fully familiarize yourself with what, what, how, etc., climb menus, view settings, etc.
ps - images rivet pretty quickly .. I think it’s different and we will come to a usable port ... do not hurry ...

Pony255, On Avito, there are not enough adequate offers .. on average, 6-7tr for 16GB and 8-11 for 64, .. compared to 20-23tr in the 12th year - this is a freebie!



Rep: (70)
Yes, I personally do not need a zhps or a camera (n8 in the second pocket :) with the Navitel installed), but a good port is all the same, of course we will later install))

Post has been editedwall637 - 13.12.13, 13:21



Rep: (7)
Alexxxl,
Do not tell me the changelog of versions of images somewhere there?
It is interesting to see what's new, what started to work :)



Rep: (472)
nakrul1990,
I didn’t come across exact changelog logs, I knew that in r3 a less toll-free part resulted ...



Rep: (70)
the dialer part works exactly, I checked it)) I changed the instructions a bit on the whole, the 7th step is simpler .. it works ..

Write down the instructions for fixes .. I tried it, I can not do it ..

Post has been editedwall637 - 13.12.13, 22:49



Rep: (472)
wall637,
Today I will do it, at the same time I will rewrite about ubiboot, c is really new for simpler



Rep: (1)
Does anyone know, the "official" instruction from Jolla will be?


Full version    

Help     rules

Now: 08/20/19, 10:58