Description and screenshotshttp://mtoolapp.biz/vozmozhnosti/

Installation depends on the version of Android. On Android up to version 6, everything is quite simple, on 6+ there are additional recommendations.
1. Registerhttp://my.mtoolapp.biz/hotreg
2. Add a phone in your account. You get a unique IDS number for the phone on which the application will run.
3. Install the application on the phone that needs to be controlled. We remember the name of the application, launch, enter into our unique IDS code. Click Login and waiting for the appearance of the settings screen. The application has been installed, the label is removed. On the settings screen, you can select the settings you need. This can be done later in the user’s office on the site. Do not put a short loading period without emergency (1 minute or “urgent load”), this can lead to unstable operation of the program not of some devices.
Next, you need to make sure that the application lives as long as possible. It is recommended to read the apparatus according to its manufacturerHERE. If you can’t read in English, use Google Translate.
4. Go to the application manager (Settings ->Applications). See if Sberbank is not installed. If installed, then we find ours and disable reading SMS in its permissions (this can be done only on Android 6+). After this, we check if Sberbank has already killed our program (* IDS #).
5. If on the Android 6+ device, look for the "Battery" section or something similar. It may have a list of applications. If there is a list, we find our application and set the status "without energy saving" to it. The name of this setting is different on different devices, so look for the meaning.
6. Some Chinese devices, such as Xiaomi, have their own “unique” settings. In Xiaomi, this is the shortcut "Security" on the desktop. In it you need to find the section "Startup" and turn on the switch opposite our application. Similarly, for Huawei and Honor, read under the spoiler HUAWEI.
7. Go to the application manager (Settings ->Applications). We find ours, we stick at it and see what it is according to the settings. There may be a "Startup" switch (enabled if not enabled). Below there will be a section "Notifications", go to it and set "Disable all notifications".
8. Here, in the application manager, we estimate whether there is any memory optimizer. Most often this is CleanMaster. Run it from the desktop, find the settings list of exceptions and add MT to it.
9. Start the settings screen via * IDS #. Click on the "Protection". A window appears to add the application to the administrators. We agree. If it worked, the application will be added to the list of administrators and it will be harder to remove (does not work everywhere, but it is recommended to try).
10. You can also provide the program with special features (version 25.15+) for reading messages of some instant messengers without root access. Go to the settings-special features (Accessibility), turn on the switch opposite the program, agree to grant permissions.
11. Hooray, everything is ready!

The traffic consumption of the application is on average 120-600 megabytes per month. We recommend buying prepaid traffic packages of at least 500 megabytes, and it is better to use a package without a traffic limit.

It is preferable to use the application on phones with UMTS (3G) or HSPA (3.5G) communication standard, since they have the ability to send data as quickly as possible.

It is desirable that the phone has an internal memory of sufficient size (4 GB or more) in addition to the optional SDCARD with the ability to install applications on the internal memory.

It is advisable to turn on the data transfer on the phone and not turn it off, because Not on all phones the application has the ability to enable data transfer independently.

Advanced instant help on the site, accessible from your personal account. Use it:http://my.mtoolapp.biz/

The application is distributed as is, free of charge. The fee is charged for storing the information collected by the application, according tocurrent rates.

It is important to remember that the application can only be installed on your own phone. You can not use the application for unauthorized access to someone else's information. Otherwise, you are violating the laws of most CIS countries and all responsibility falls on you.

Since we are technically unable to check whether the application is installed on someone else’s or your phone, we hope for your honesty.

The full text of the agreement.

1. Before installing the new version, you need to remove the old one. To do this, select the application in the application manager and click the "Delete" button. In the root version after running "Hide", deletion is performed from the settings screen (Delete =>reboot required).
2. Never install the program again over the old. This can lead to unpredictable program failure (data will not be uploaded to the server, etc.).
3. If you cannot delete from the application manager, then check the list of administrators (Security =>Administrators) and uncheck it. After that, you can delete the application in the standard way.
4. Starting from version 21, there is the possibility of emergency data download from the settings screen (Download data), i.e. no data loss during reinstallation.

there isinformationThat in Samsung S9, S9 + at the system level call recording is prohibited. It is possible that the corresponding updates have already been released for lower versions (S8, S7).
There are reports that other Samsung models out firmware updates, which prohibited the recording during a call. Also, in general, the Samsung can be a problem with the recording in general (distorted sound).

HereDescribes how to remove unnecessary system applications without getting root. It does not work everywhere, but you can try.
It may be useful for removing Avast optimizer from Honor, Huawei devices.

Many questions arise about "does not send data, not everything comes, etc."
Sometimes our server is buggy. In this case, nothing comes at all. Channel availability testing is ongoing.
Sometimes just the data is not stable on some devices.

There may be several reasons:
1. Mobile Internet is not a home Ethernet nipple. On mobile towers, a limited number of channels that can end and the Internet will disappear for a while. This is so simplistic. Those. this compound is not always stable. My experience viewing normal pages anywhere in the city confirms this. Sometimes nichrome does not open for 5-10 minutes.
2. Now, mobile operators have gone to the fashion to optimize the work of the Internet, which they distribute. Gateways are configured in such a way that first of all traffic is passed to Vsky YouTube, Google services and all that. Our traffic does not get into this in any way. As a result, sometimes when loading a network, access to our service may come with delays.
2.1. Any instant messenger and other garbage runs so stable because they work through the messaging service of Google FireBase (see claim 2 in particular). We are the service can not use, I hope it is clear why.
2.2. Such a network setup with an opretar is essentially the provision of a reduced service, since not only MTs work on non-standard ports, but also many other services, such as telemetry devices of transport and technological objects, also send data to an arbitrary address and to an arbitrary port.
3. Sometimes it happens that the machine is connected to the Internet via an old slow connection: EDGE, GPRS. If the cabinet section "Device Info" you see this type of network, it is a signal that the "hard" data (record), and even in general any data can not be transmitted to the server. Good speed compound: HSUPA, HSDPA, HSPA, HSPA +, LTE.
4. Now VPN services have become popular to bypass Telegram locks and other resources. Unfortunately, often these VPN services (especially free ones) provide a poor-quality service when communication is unstable, many ports are blocked, etc. In this case, sometimes the application can not properly send the data, especially if we are talking about megabytes of records.

Some Chinese comrades decided that it was possible to deviate from the specification of Google Android as they wanted and implemented their own optimization. They decided that only system applications and those that the user will run manually, and when the background process is stopped, the system optimizer should work on the device. This is not combined with Android developers, so often on the apparatus Huawei, our application lives from 3 hours to 1 day. In this case, you need to either remove the optimizer manually (see the spoiler "Removing system applications without ruts") or configure something. Here is one of the users sharedsetup instructions.

Here is in Russian:
Manipulations:
"Settings>Battery>Launch>Disable automatic control and set the control manually with the inclusion of all functions (autostart, indirect start, work in the background).
"Settings>Applications>Special access>Ignore battery optimization>All applications>Change application status in the list ".

Huawei P40 Lite E (EMUI version 10.1.0, Android 10):
1. Install MT, but not login.
2. Settings>Battery>Running applications>Disable automatic control and set manually control with the inclusion of all MT functions (autorun, indirect launch, work in the background).
3. Settings>Confidentiality>Manager rights>Special access>Ignore battery optimization>All applications>Change MT status on "prohibited." If it fails to find (in my for some reason it was not this partition, but over the settings or prog were opened), then search for the settings (Optimization) or call this menu from the program settings window (Battery Setting).
4. Run MT, enter IDs, login.

Xiaomi (Checked and works on Xiaomi Redmi 9, version Miui Global 11.0.4, Android 10 ):
1. Settings - about the phone - the version of MIUI - to the version of five times five times - "you developer" will appear. We go into the settings - extended settings - down by leaf, find "for developers", leafing to the bottom and turn off turn off the MIUI optimization.
2. Further, on the desktop we find the "Security" label, the upper right corner - we find a gear - antivirus - signatures - translate to AVL.
3. Restart tel. After that, we put MT, set the parameters of energy saving, notifications, autorun rights.

Some users have successful experience with moving applications to the system usingof this program. On 9+ systems for installation in the system tray, you can use the module magisk app systemizer.
In system applications Xiaomei found this: MI system cleaner. His mozhdno cut it out of the system (see spoiler "Removing the system applications without Ruth," the team: pm uninstall -k --user 0 com.miui.cleanmaster).
Takenfrom here.

Try not to set short periods of MT timers (coordinate collection, data unloading), because In this case, built-in system policies that are not configured, and the application can be paused. Recommended periods: 30 or more minutes.

Q: How can I find the application in the list of installed?
A: The name of the application periodically changes (with the release of new versions), i.e. Carefully see what is written in the title window login during installation.

Q: How to bring up the settings screen?
A: In the dialer dial * IDS # - to call. IDS in this case is the registration number of the program from the user's account. In some devices, the settings screen appears for a short time, but then it disappears and a message appears about the USSD request. In this case, you can try to disable the temporarily mobile network (airplane mode) and dial again * IDS # - call.

Q: How to install a new version if I already have an old one?
A: Installing a new version of the application is done manually only after removing the system version. In order not to lose the accumulated data, you need to call the settings screen and click "Download data". After that, remove the application from the list of installed on the system, and then install the new version.

Q: What should I do if I can not remove the application, because Is the "delete" button inactive?
A: This means that the application is in the list of administrators. Go to Settings - Security - Administrators. If the application is there, then uncheck it. After that you can delete as usual.

Q: What should I do if after a call to * IDS # a message like "USSD request is being executed" appears instead of the settings screen?
A: This means that for some reason the application is completely killed. A user or another application (memory optimizer, antivirus, system service, etc.) can completely kill an application. In this case, you can only completely reinstall the application (delete what is and reinstall it).

Q: My application periodically stops transmitting data. What to do?
A: Several options (it is recommended to check all):
- if the settings screen is not called, then immediately to reinstall (to understand who killed him)
- check the system power optimizer. For example, in some samsungs there is a Smart Manager setting, where in the “battery” section in the list of applications you can configure for each application whether it will stop after X days automatically if the user has not started the visual part.
- add the application to the list of antivirus exceptions
- add the application to the memory optimizer exception list (CleanMaster, etc.)
- disable collection of all information in the application settings, except for calls and SMS
- set a longer synchronization period with the server (do not set 1 and 5 minutes, preferably 15 or 30)

Q: Not all calls are recorded. What to do?
A: The most common problem with recording calls comes from programs that can block recording (Viber, Skype, voice recording, etc.). Exceptions are cases when all outgoing (or incoming) calls are not written - in this case, the problem is in the system itself, which does not generate the required sequence of events for recording. It is also recommended
check the sound recording channel: they are not all working.

Q: Not all tasks from the office are performed. What to do?
A: First of all, you need to understand that tasks for the device arrive only after the program communicates with the server. Secondly, it must be remembered that Android does not guarantee the completion of tasks at exactly the specified time, so you do not need to set the time for the tasks butt-and-do, and do between them the interval of 3-5 minutes. Third, some tasks may not be completed if they conflict with
something (taking a picture of the camera during a call, recording a voice recorder during a call, etc.).
There is information that the record can block the EMOJI LOCK SCREEN application.

Q: If an MT writes a voice record, then other programs (camera, messenger voice messages, etc.) cannot work. What to do?
A: If you have an Android 10+, then try to set the record channel 6 (the program should have the right to special opportunities). With older systems, nothing can be done, because Any joint use of the recording channel causes a conflict.

Q: The program "Sberbank" swears at the application that it is dangerous and kills it. What to do?
A: This problem is known. Sberbank believes that applications that have access to SMS are dangerous. In Android 6x, you can disable SMS access permission in the application manager. For other versions of Android, it is recommended to use the patched version of Sberbank at your own risk.

Q: How does the "Protection" button work in the settings screen?
A: This button adds the program to the list of administrators. During normal operation, a window should appear with a list of administrator permissions that the program requests. Administrator functions allow you to implement anti-theft functions (screen lock with password, hardware).

Q: How does the "Voice recorder priority" option work?
A: By default, this option is disabled (the call is interrupted by voice recording). Enabling this option means that the voice recording will not be turned off when you start a telephone conversation. In this case, the voice recording file in the office will be associated with the call. It must be remembered that the recording of the conversation is not interrupted by the voice recorder and if the task of the voice recorder should begin
call records, this task will be ignored.

Q: Synchronization with the server is extremely vague, and tasks are performed at the wrong time.
A: Synchronization with the server depends on the presence of connection to the Internet. If the application cannot include mobile Internet on the device (on all devices with Android 5+), then data transfer will only be via WIFI or if the user himself turns on the mobile data transfer. The second factor is the optimization of the use of the battery, which was especially aggressive in Android 6x. Study the menu of the device regarding the optimization of the use of the battery. Most likely there it will be possible to put the application on the list to which optimization is not applied.

Q: How does the "Stabilization" setting work?
A: Setting "Stabilization" consists of three options: always, critical operations, disabled. The system disconnects the implementation of all programs, except for systemic ones, immediately how the screen goes out. At the same time, the program sometimes needs to complete some actions. Another system at any time can kill the program in order to clean the memory, and we need to record a call, for example. For this, there is a stabilization mode in which the system is highly likely to kill the application. The problem is that in this case an empty notice is displayed in the upper area of ​​the screen. Constant stabilization on some devices causes a quick discharge of the battery, but there is no notice. In any case, experiment. In version 25, Setting "Stabilization" is used to add data loading, for example. You can turn off an empty notice at the top of the screen in the settings in the application manager: we go to the application manager, click on our application and in the "Notifications" section, turn off their show.

Q: The root version is unstable. The program constantly stops communicating with the server.
A: If you are going to install a root version, it is first of all that it is recommended to figure out how the root is obtained on this device. It is recommended to launch the device through the firmware of the bootloader and the installation of SU through the recovery. To do this, look for the appropriate branch with firmware for your phone. Various programs for simple receipt of a Kingaroot -type root and others can work unstable or require additional settings that are not always obvious. See carefully SU settings: it is recommended to select the action "Provide" when requesting a ROOT-access, because On some devices there is a periodic hang of the program without this resolution. It is recommended in principle to set all permits to SU to the maximum.

Q: What happens to the program if the days on IDS are over?
A: When the days end, the data collection stops. The program simply requests data from the server during the synchronization period - have the days appeared. As days>0, functional is restored.
If you delete the IDS in the office, the program will stop forever. Root version will try to delete itself.

Q: I send messages from my page to Odnoklassniki, but they do not appear in the office. What to do?
A: The program collects data only from the Odnoklassniki, OK and other applications installed on the device. Messages sent via web forms cannot be intercepted.

Q: A system message appears in the notification area that the application is potentially dangerous.
A: Google remembered "security." In the settings of the device there is a section Google->Security. In this section, you need to find items that are responsible for checking potentially dangerous programs and disable them.

Q: I can not listen to calls. Why? Rather, one listened and following I can not.
A: For listening, it is recommended to download recordings to a computer and listen using BSPlayer. Sometimes records come with a delay. In this case, the downloaded entries will be empty. You just need to wait until everything is ready.

Q: What is the procedure for spending money? Can I spend days in installments when I need to?
A: The purchased days are credited to the total cabinet balance. Next to the desired device with the total balance can be credited how many days you need. The program determines a positive balance and starts collecting data. As soon as the days are over, the collection of information stops. Days have appeared - work begins again. Please note that sometimes the payment is blunt and the payment transaction takes up to 3-5 days, and sometimes everything is fast.

Q: Something incomprehensible is happening with the program: crashes on launch, permanent errors, etc.
A: Check if the device has a section Service / Permissions / Autostart (Service - shortcut in the application menu). Add an application to the list that allowed autorun. In some firmware, there is a "Permission Control" setting that allows individual applications to set permissions. There are features on some Xiaomi devices with the MIUI system, about thishere.

Q: Tell me, how can I customize time zones? The time of events in the office does not coincide with the local.
A: On the phone you need to check the time zone. The principle is this: all data is recorded on UTC. Then on the page of the cabinet are reduced to the location of the system in which the browser is running. Those. in the office you see at what time in your time zone events occurred. On some devices, the time zone is incorrectly configured, and the time is simply screwed to the right time. In this case, it turns out that the UTC time is incorrect.
In short, the time must be properly configured on the device where the data is collected and on the device where the cabinet opens.

Q: No calls are written. Entries are empty.
A: There are several options. The first is an incorrectly configured recording channel (set 1 or 4). The second is an application that is launched and uses a microphone. These can be different applications (some games, including). The third option is the incorrect sequence of the call of the call, as a result of which the program will not get into the record. On 10+ systems, use the recording channel 6 and special opportunities for MT.

Q: Why are some records of the browser history, email or correspondence not visible.
A: Sometimes any parameters may exceed the ability to write to the database (too large text, subject, Url, etc.). In this case, the data will be discarded by the server and will not be written to the database.

Q: In the recording of calls you can not hear the interlocutor. What to do?
A: The interlocutor is audible or not audible depends on the recording channel. The perfect channel is 4, but it works far from everywhere. Channels 1 and 5 are microphones, i.e. They are written off what got into them (depends solely on the design of the device). It is recommended to write in mp3, because The recording will turn out to be better and then it can be accepted in Sound Forge or Audacy to make the interlocutor's voice more distinct. Someone else was helped by delays before the start of the recording or changing the start of the start of the recording.

Q: The phone was turned off, but after turning it on, the application does not contact.
A: On new systems (Android 7+), if there is an entry password (fingerprint lock, etc.), the device must be unlocked after reboot in order for the service to restart.

Q: The program does not collect location data. What to do?
A: On some devices, due to the peculiarities of the firmware, the program cannot get data on the towers. Try enabling location service in the machine settings.

1. Old versions of VK.
2. KateMobile
3. Whatsapp
4. Skype
5. Viber
6. Odnoklassniki
7. Twitter
8. IM +
9. ICQ
10. Telegram
11. Chrome Browser
12. OperaMini Browser
13. Opera Browser
14. FireFox Browser
15. Dolphin Browser
16. Yandex Browser
17. Gmail
18. MailRU
19. YahooMail
20. YandexMail

Sometimes something stops working temporarily or permanently. Write, if that.

Improved way to disable built-in cleaning system CLEANER on androids
To disable the Cleaner Cleaner, the program was used:
MyAndroidToolsPro
Link to the program undervideo

version: 8 [attachment = "3768624: mobiletool_8.apk"]
version: 12 MobileTool (Post # 29437928)
version: 13 MobileTool (Post # 29986349)
version: 14 MobileTool (Post # 30892437)
Version: 14beta ROOT MobileTool (Post # 30892688)
version: 15 MobileTool (Post # 31077530)
Version: 15beta ROOT MobileTool (Post # 31077530)
version: 16 MobileTool (Post # 31763222)
Version: 16 ROOT MobileTool (Post # 31763222)
version: 17 MobileTool (Post # 32042371)
Version: 17 ROOT MobileTool (Post # 32042371)
version: 18 MobileTool (Post # 33474902)
Version: 18 ROOT MobileTool (Post # 33474902)
version: 19 MobileTool (Post # 33631073)
Version: 19 ROOT MobileTool (Post # 33631073)
version: 20 MobileTool (Post # 34144342)
Version: 20 ROOT MobileTool (Post # 34144342)
version: 21 MobileTool (Post # 36540694)
Version: 21 ROOT MobileTool (Post # 36540694)
version: 22 MobileTool (Post # 49917080)
Version: 22 ROOT MobileTool (Post # 49917080)
version: 23 MobileTool (Post # 49012097)
Version: 23 ROOT MobileTool (Post # 49384447)
version: 24 MobileTool (Post # 50034929)
Version: 24 ROOT MobileTool (Post # 50034929)
Version: 25.14 MobileTool (Post # 78110196)
Version: 25.14 ROOT MobileTool (Post # 78110196)
Version: 25.15 MobileTool (Post # 80867589)
Version: 25.15 ROOT MobileTool (Post # 80867589)
Version: 25.17 MobileTool (Post # 81903707)
Version: 25.17 ROOT MobileTool (Post # 81903707)
Version: 25.183 MobileTool (Post # 85479213)
Version: 25.183 ROOT MobileTool (Post # 85479213)
version: 25.184 MobileTool (Post # 88562666)
version: 25.184 ROOT MobileTool (Post # 88562666)
version: 25,191 MobileTool (Post # 90765846)
Version: 25.191 ROOT MobileTool (Post # 90765846)
version: 25,192 MobileTool (Post # 90765846)
Version: 25.192 ROOT MobileTool (Post # 90765846)
version: 25,193 MobileTool (Post # 96918971)
Version: 25.193 ROOT MobileTool (Post # 96918971)
version: 25,195 MobileTool (Post # 97811441)
Version: 25.195 ROOT MobileTool (Post # 97811441)
version: 25,196 MobileTool (Post # 98064227)
Version: 25.196 ROOT MobileTool (Post # 98064227)
Version: 25.197 MobileTool (Post # 98222253)
Version: 25.197 ROOT MobileTool (Post # 98222253)
Version: 25.198 MobileTool (post # 101988035)
Version: 25.198 root MobileTool (post # 101988035)

Versions 24 and 25 are fundamentally different download protocol. The protocol assumes batch loading of data in parts, which increases the stability of downloads via the mobile network. The new server for version 25 continues to be refined and maintained, as is version 25 of the client itself.
I recommend to put 25.17+. Some serious errors were fixed in it: pictures could not be collected due to directory search errors; the service stopped when the battery was low and did not start again when the charge was normal. Well, the protocol is more flexible, data is loaded with packets, and if there are problems with the server, the application does not enter into an endless cycle of unsuccessful frequent download attempts.
But, if the device is old with a RAM of 512-1024 MB, then version 24 is probably better. it consumes less memory, i.e. over to test.

In versions of Magisk 19.1+ after receiving the root for MT, you need to go to the Magisk settings. In the "Superuser" section, we find the MT in the list, click the down arrow and disable notifications and log. If this is not done, then each time you start the login screen, the MT will close quickly.

On the phone raskalad such.
The most problematic is the huavei, because have a built-in optimizer. In the header there is information about its configuration, but I am not sure that you can do this on all models and firmware. Xiaomi seems to be customized, but I only have the old, and what's new, I do not know.
The general principle is: the cleaner the system, the better the work, or at least there is a possibility of customization to work. I have been working on Androyd 9 for months without problems. The system has adequate energy saving settings. The purity of the system is understood as the percentage of what the manufacturer charged there and how respectful he was of the developer specification (for example, Huawei is how not to do it, because this approach interferes with the work of not only MT, but also many other programs).
There are devices on a clean android (Nokia), there are with minimal modifications (new Sony, HTC), and they can be configured to allow MT to work stably for a long time.
On systems to Androyd 6 everything worked more or less stably. Then began the optimization and distortions on the part of manufacturers. Specific models are difficult to name, because there are a lot of different devices, and there is no possibility to test them all.

Starting with Android 9, officially announced the termination of support for recording calls. Silence is written on some devices. On Android 10 it is recommended to set the channel of recording 6 and give the program access to special features.

Translation of Western Resources of such a problem.
All calls can not be recorded or the recording quality is very poor or non-existent, why?

There are 5 possible reasons:

Your phone works another recorder, which blocks MT. Android allows only one recorder, so first you have to remove all other recorders, MT otherwise not be able to record calls.
You use the app "Voice Assistant" app takes the microphone, it continuously receives the sound from the microphone in order to recognize your "voice command", and it blocks the MT job. Please disable Voice Assistant app.

Appendix В«OK GoogleВ» - the most popular voice assistant in Android phones, turn off the phone the following option:
Some phones disable the "Settings>Google>Search>Vote>OK Google detection>From any screen. "
Some phones disable the "Settings>Google>Search>Vote>OK, Google detection>Say, well, Google is at any time. "
Some phones disable the option "Settings>Google>Search>Vote>voice matching>Say ok, Google is at any time. "
Some phones disable the "Settings>Google>Search>Vote>voice comparison>Unlock via voice comparison. "

If you use your phone Samsung, also check application В«BixbyВ», it's your own voice assistant Samsung, you will disconnect it.
If you use the Moto phone, please check the application В«Moto VoiceВ», is the Motorola own voice assistant, you should disable it.
If you are using a Huawei phone, check also В«HiVoiceВ» application is a proprietary voice assistant Huawei, should be disconnected.
Some phones Huawei disconnect В«HiVoiceВ» application as follows:
Open the "Settings>Applications>HiVoice В»and confirm that the package name -В« com.huawei.vassistant В».
Press the В«Force StopВ».
Some Huawei phones disable the option "Dial>Settings>A quick call. "
Some Huawei phones disable the option "Contact>Settings>A quick call. "
Some Huawei phones disable the "Settings>Smart Assistance>Voice control".
Some Huawei phones disable the "Settings>Applications>System applications>Voice dialing. "
Some phones Huawei, maybe they are somewhere else, please read this user guide if necessary.
For other phone manufacturer has its own voice assistant, please check it.

In rare cases, the program may not record voice calls on some phones. This is due to their hardware and software features that differ from the specifications of Android (non-exhaustive list: Google Pixel, Nexus 6P, Nexus 6, Nexus 5X, Nexus 5, Nexus 4, Moto G4, HTC M7).
Only voice calls can be recorded calls via Wi-Fi can not be recorded, so if your phone supports calls over Wi-Fi, please disable it.

If your phone is running Android to Pie 9, the recording quality will be very low or non-existent, the solution is to activate the speaker.

Here is the answerOne of the owners of Samsung on Android 10.

Many users have problems with the simultaneous work of MT and Sberbank. Here are collected explanations and recommendations on this issue.
1. It is known that Sberbank kills all applications that have permissions to read SMS. On most systems, this leads to the fact that the program works unstable, or just remains killed forever (you have to reinstall).
2. It is known that antivirus is built into Sberbank, which can also define MT as a dangerous application.
3. When you first start, MT is looking for Sberbank among the installed. If it finds it, the login window does not request the rights to read SMS. Just in case, it is better to check whether something has not been established from the selection, because They have several programs, different names, and MT can skip something.
4. To deceive the antivirus embedded in Sberbank, you can generate the original version of the application. This can be done in the Cabinet section "Create an application". Change necessarily the name when creating a new application.

Hello,

Please note that this information is in the operating instructions (which you had to familiarize yourself with):

The payment system for our service is arranged as follows: there is an intermediary company - which you pay for services, it checks the payment, and if everything is in order, the company employees launch a script that will charge you days. We, in turn, do not take part in this process.

If the payment has not passed within 3 business days, then you need to contact the technical support of not our service, but the service through which you paid:

If you paid through Freekassa:
Section Contacts on the sitehttps://www.free-kassa.ru/. (button "For perfect payment")

If you paid via Interkassa:
Write in chat (from the bottom right) on their websitehttps://www.interkassa.com/.

Employees of the payment service will check all the data on your payment and, if necessary, will contact our team. In 99% of cases, the problems are solved on the side of the payment service, very rarely when the problem is on our side. Not a single payment will be left without attention. Otherwise, your money will be returned in connection with the non -ordering of the service.

If employees Freekassa or Interkassa refused to help you: **

You take pictures of the whole correspondence between you and employees
Photo photographs about the best payment
Send us all the information
We will contact the leadership of the system and find out why you were refused help. Usually it does not reach.

Those who write that the program does not work, "freezes" and so on. Please, unsubscribe if you read the sections "FAQ" and "Installation" in the header and what you did about it. For the Chinese, there is a spoiler about HUAWEI ... IDS is also desirable to apply.
And then the questions "does not work for me, what to do?" just clog the branch, because An adequate response to them can not be given.