Explay firmware MU240 | Flash Explay MU240
USB_VCOM_Driver.rar
Update_MU-240.pdfGentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?
Azariev @ 6.6.2014, 21:26
Gentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?
Well, who prevents to try? ;) And look hereExplay MU240 Firmware (Post # 27965489)
I tried to flash it - this way and that, it’s impossible to install firewood and that's it (win7-64)
scored, it's not worth it to waste time
scored, it's not worth it to waste time
[email protected], 04:27
There was a version 3.00 changed to 4.01 and the phone almost stopped catching all operators on all sims. I returned it back to 3.00, everything became good again .. I will not touch it anymore.
I wrote the same thing to the tech support, said, bring it to the SC, I returned to 3.00, it also became the norm I do not advise you to go to 4.01
[email protected], 02:26
Gentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?
I tried it did not work out from 4.01 to 3.00, when trying to flash 2.00 it hangs, waiting for the countdown to take a second and everything waited up to 200 seconds (during this time the body would have already pierced the body and cut down the program)
Good day to all.
- and it is not known, is it possible to install automatic call recording?
- Does anyone have a phone with firmware in. 4.00? meaning is on c. 4.01 to flash? as written in the description of the firmware 4.01 * (Fixed translation.).
- and can anyone find any interesting features in the engineering menu?
Post has been editedmrAlex72 - 20.08.14, 03:03
- and it is not known, is it possible to install automatic call recording?
- Does anyone have a phone with firmware in. 4.00? meaning is on c. 4.01 to flash? as written in the description of the firmware 4.01 * (Fixed translation.).
- and can anyone find any interesting features in the engineering menu?
Post has been editedmrAlex72 - 20.08.14, 03:03
I flashed my mu240 from 4.00 to 4.01.
INSTRUCTIONS:
1. Download the archive with firmware 4.01 (MU240_V4.01.rar ), extract the contents for example in a folder called MU240_V4.01
2. then go to... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar , also extract the contents for example in a folder called EGO_SyncTool_Setup
3. go to... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64 bit system, if you have a 32 bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 run DPInst.exe all questions click YES (Continue anyway)
4. Restart the computer, while booting the computer, press the buttonF8 , we choose there Disable driver digital signature verification
5. In the folder... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the firmware UpgradeDownload.exe , in the program we press the button Start download
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. Once in the columnProgress will appear green lettering , press the button in the program stop loading , remove the cable from the phone. EVERYTHING
Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).
Post has been editedmrAlex72 - 09.10.14, 03:09
INSTRUCTIONS:
1. Download the archive with firmware 4.01 (MU240_V4.01.rar ), extract the contents for example in a folder called MU240_V4.01
2. then go to... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar , also extract the contents for example in a folder called EGO_SyncTool_Setup
3. go to... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64 bit system, if you have a 32 bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 run DPInst.exe all questions click YES (Continue anyway)
4. Restart the computer, while booting the computer, press the buttonF8 , we choose there Disable driver digital signature verification
5. In the folder... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the firmware UpgradeDownload.exe , in the program we press the button Start download
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. Once in the columnProgress will appear green lettering , press the button in the program stop loading , remove the cable from the phone. EVERYTHING
Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).
Post has been editedmrAlex72 - 09.10.14, 03:09
MrAlex72 @ 10.10.2014, 03:54
The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, press a call, and he writes me "I can not dial this number"
this jamb will appear again
Explay MU240 (Post # 30852713)
refuses to dial some numbers - go to APP SET engineer and flick CALL BARRING
Hello everyone, how can I pull out the phone's power-off tune? There is no phone in the phone itself, it is a hike in the firmware. Help please who knows.
INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
It helped for Explay b240. Next - native flash driver. Super! Thanks!
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
It helped for Explay b240. Next - native flash driver. Super! Thanks!
MrAlex72 @ 10.10.2014, 02:54
I flashed my mu240 from 4.00 to 4.01.
INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING
Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).
INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING
Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).
Sign up here specifically to say thank you very much for this post!
I was also tormented by instructions from the first post - nothing worked.
According to the instructions above, everything worked out the first time. Stitched from 4.0 to 4.1
MrAlex72, Thank you again, my dear man.Skorps08 @ 12/06/2015, 16:51
I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers
This bug has nothing to do with the firmware: to eliminate it, go to the APP SET section of the engineer and flick CALL BARRING
MrAlex72 @ 10/09/14, 02:54
I flashed my mu240 from 4.00 to 4.01.
INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING
INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING
Thank you, kind man!
Right on the instructions did not work, apparently the device is old, and I did not master the 4 firmware, although I tried it in different ways.
But I took another firmware, and it worked! Apparently, the whole thing in the magic of the cancellation of the digital signature verification.
[email protected], 21:14
it's all about the magic cancellation of the digital signature verification
Deal mainly in different hardware stuffing devices with different software versions
failed to flash v.3 on any firmware
endless "Checking baudrate"
firewood stood up, there were two devices, but ... it did not work on two PCs (and figs with it, purely sports interest)
UPD
fortune turned to me
it is necessary to sew with this device, and not the two former at the beginning of my post
original version was 3.00
You can flash at 4.01 and back 3.00, it is not flashed to the lower
Post has been editedazariev - 14.01.19, 21:53
endless "Checking baudrate"
firewood stood up, there were two devices, but ... it did not work on two PCs (and figs with it, purely sports interest)
UPD
fortune turned to me
it is necessary to sew with this device, and not the two former at the beginning of my post
original version was 3.00
You can flash at 4.01 and back 3.00, it is not flashed to the lower
Post has been editedazariev - 14.01.19, 21:53
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement