[X]Assistant

[der_KeTZeR]

FlashingFlashing Explay MU240
Discussion пїЅ | Flashing пїЅ

Everything you do, you do at your own peril and risk.

Driver

Download the driver.USB_VCOM_Driver.rar(10.79 KB)

Instructions from off. site (which probably did not work for anyone)

1) Unzip the firmware file “MU240 .....”.
2) Open the “UpgradeDownload” file.
3) Remove the battery from the phone.
4) Hold down the right function key and connect the phone to the PC, using
MTK cable.
5) Click on the “Start Download” button.
6) Insert the battery into the phone, without releasing the right functional
keys, then the firmware process will start.
7) If the PC asks for drivers, you can take them in the “USB VCOM Driver” folder (after
driver installation, repeat steps 3-6).

Instructions on firmware found on the Internet

Explay MU240 Firmware (Post # 26692327)

Firmware
MU240_V1.00_130315.rar(16.32 MB)
V 1.00
MU240_V2.00_130315.rar(16.26 MB)
V 2.00
MU240_V3.00_20130814.rar(13.9 MB)
V 3.00
MU240_V4.01.rar(13.38 MB)
V 4.01

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ MU240 пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ .PDF download

Update_MU-240.pdf(97.88 KB)

Instructions for use MU240 in .PDF format MU240-RUS -Manual.pdf(679.96 KB)

Serial numbers for firmware MU240 v1.xx, v2.xx in .PDF format sn_for_MU_240.pdf(80.28 KB)

Serial numbers for MU240 v3.xx firmware in .PDF format Serial MU240 v3.pdf(191.54 KB)

Serial numbers for v4.xx firmware in .PDF format sn4.pdf(79.36 KB)


Post has been editedder_KeTZeR - 16.08.14, 09:30

Reason for editing: Updated cap

[petabyte_1991]

And the cable that came with the phone, is it suitable for firmware or not?

[Vovandok]

The cable fits any.
pysy. 4.01 I do not advise you to flash, it loses the network tightly

[azariev]

Gentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?

[der_KeTZeR]

Azariev @ 6.6.2014, 21:26

Gentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?

Well, who prevents to try? ;) And look hereExplay MU240 Firmware (Post # 27965489)

[azariev]

I tried to flash it - this way and that, it’s impossible to install firewood and that's it (win7-64)
scored, it's not worth it to waste time

[stiv2206]

[email protected], 04:27

There was a version 3.00 changed to 4.01 and the phone almost stopped catching all operators on all sims. I returned it back to 3.00, everything became good again .. I will not touch it anymore.

I wrote the same thing to the tech support, said, bring it to the SC, I returned to 3.00, it also became the norm I do not advise you to go to 4.01

[stiv2206]

[email protected], 02:26

Gentlemen, explain on hardcore - I understand correctly that it is impossible to make a downgrade from 3.00 to 2.00?

I tried it did not work out from 4.01 to 3.00, when trying to flash 2.00 it hangs, waiting for the countdown to take a second and everything waited up to 200 seconds (during this time the body would have already pierced the body and cut down the program)

[Vovandok]

And did the mod not appear, firmware, or at least software for disassembling it?

[mrAlex72]

Good day to all.
- and it is not known, is it possible to install automatic call recording?
- Does anyone have a phone with firmware in. 4.00? meaning is on c. 4.01 to flash? as written in the description of the firmware 4.01 * (Fixed translation.).
- and can anyone find any interesting features in the engineering menu?

Post has been editedmrAlex72 - 20.08.14, 03:03

[mrAlex72]

I flashed my mu240 from 4.00 to 4.01.

INSTRUCTIONS:
1. Download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder calledMU240_V4.01
2. then go to... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOLthere is an archiveEGO_SyncTool_Setup.rar, also extract the contents for example in a folder calledEGO_SyncTool_Setup
3. go to... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64if you have a 64 bit system, if you have a 32 bit system, then go to... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86runDPInst.exeall questions clickYES (Continue anyway)
4. Restart the computer, while booting the computer, press the buttonF8, we choose thereDisable driver digital signature verification
5. In the folder... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASErun the program for the firmwareUpgradeDownload.exe, in the program we press the buttonStart download
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. Once in the columnProgresswill appeargreen lettering, press the button in the programstop loading, remove the cable from the phone.EVERYTHING

Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).

Post has been editedmrAlex72 - 09.10.14, 03:09

[azariev]

MrAlex72 @ 10.10.2014, 03:54

The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, press a call, and he writes me "I can not dial this number"

this jamb will appear again
Explay MU240 (Post # 30852713)
refuses to dial some numbers - go to APP SET engineer and flick CALL BARRING

[Dimonolog2008]

Hello everyone, how can I pull out the phone's power-off tune? There is no phone in the phone itself, it is a hike in the firmware. Help please who knows.

[borat3]

did everything that is written downloading began

Post has been editedborat3 - 29.03.15, 22:02

[gorec006]

help remove the password, mu240?

[mitab]

INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification

It helped for Explay b240. Next - native flash driver. Super! Thanks!

[Skorps08]

MrAlex72 @ 10.10.2014, 02:54

I flashed my mu240 from 4.00 to 4.01.

INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING

Bottom line: the phone works without complaints. All three sim cards catch the network perfectly. The problems that I had on firmware 4.00 disappeared (I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers).

Sign up here specifically to say thank you very much for this post!
I was also tormented by instructions from the first post - nothing worked.
According to the instructions above, everything worked out the first time. Stitched from 4.0 to 4.1
MrAlex72,Thank you again, my dear man.

[azariev]

Skorps08 @ 12/06/2015, 16:51

I could not dial 2 phone numbers, I press a call, and he writes me "I can not dial this number", although I could send a message to these numbers

This bug has nothing to do with the firmware: to eliminate it, go to the APP SET section of the engineer and flick CALL BARRING

[Aeorn]

MrAlex72 @ 10/09/14, 02:54

I flashed my mu240 from 4.00 to 4.01.

INSTRUCTIONS:
1. download the archive with firmware 4.01 (MU240_V4.01.rar), extract the contents for example in a folder called MU240_V4.01
2. The further we go in ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE \ PC_SYNC_TOOL there is an archive EGO_SyncTool_Setup.rar, and extract the contents of such a folder called EGO_SyncTool_Setup
3. go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x64 if you have a 64-bit system, if 32-bit system, then go to ... \ EGO_SyncTool_Setup \ EGO_SyncTool_Setup \ x86 to run DPInst.exe. )
4. Restart the computer, while the computer is loading, press the F8 button, then select Disable driver digital signature verification
5. In the folder ... \ MU240_V4.01 \ MU240_YZ667C_B246_QVGA_TRI_320X240BAR_MRuEn_V01.02B14-P_RELEASE run the program for the UpgradeDownload.exe firmware, in the program we press the Start Download button
6. Remove the battery from the phone, hold down the SIM1 call button, connect the cable, insert the battery, wait a couple of seconds and the firmware program will go through the firmware, release the SIM1 call button
7. The whole process will take 159 seconds. After the green inscription appears in the Progress column, press the button to stop the download in the program, remove the cable from the phone. EVERYTHING

Thank you, kind man!
Right on the instructions did not work, apparently the device is old, and I did not master the 4 firmware, although I tried it in different ways.
But I took another firmware, and it worked! Apparently, the whole thing in the magic of the cancellation of the digital signature verification.

[azariev]

[email protected], 21:14

it's all about the magic cancellation of the digital signature verification

Deal mainly in different hardware stuffing devices with different software versions

[azariev]

failed to flash v.3 on any firmware
endless "Checking baudrate"
firewood stood up, there were two devices, but ... it did not work on two PCs (and figs with it, purely sports interest)

UPD
fortune turned to me
it is necessary to sew with this device, and not the two former at the beginning of my post

original version was 3.00
You can flash at 4.01 and back 3.00, it is not flashed to the lower

Post has been editedazariev - 14.01.19, 21:53