> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


59 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> DNS S4004M - Official firmware (Android OS 4.2.2)
Divers-m
Message#1
05.11.13, 22:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 197
Check in: 17.05.14
LG Q6

Reputation:-  35  +

DNS S4004M - Firmware (Android OS 4.2.2)
PictureS4004M
Description | Discussion | Firmware

Drivers and Utilities

Firmware
Official firmware
Unofficial firmware

Instructions
BEFORE FIRMWARE, IT IS MANDATORY TO MAKE A FULL BECUP FIRMWARE!
with helpMtkDroidToolsorFlashtool.
Installing drivers from - = Banderlog = -

Take out the skatter

Sound problems

For those who do not see a TWRP or CWM cdcard (for PC)
1. DownloadingSD Formatter
2. Unpack and install, run.
3. Click option, in the format type tab, select Full (over write).
4. The second item is set to ON.
5. Click OK and wait.

Instructions for firmware throughFlashtool
1. Open the Flashtool utility.
2. Next, in front of the scrater loading file, use the appropriate button to select the scrater file (located in the android folder)
3. When all files appear, remove the checkbox with preloader s4004m.bin ..
4. Turn off the phone (disconnect from the PC).
5. Click the download button.
6. Several lilac progress bars will run and the program will stop.
7. Connect the device to the PC (firewood must be installed) (the device must be turned off).
8. If everything goes right, the device will be detected and the firmware process will go.
9. If it does not work, try to pull the battery.

Removing the system program through the Root Explorer

Instructions for installing the firmware throughCWM / TWRP Recovery
1. You must have CWM / TWRP recovery
2. We dump the archive in the root of the sd card
3. Turn off the phone
4. Hold down the vol.- key and the ON / OFF button
5. WIPE DATA / FACTORY RESET (CONFIRM YES ...)
6. WIPE CACHE PARTITION (CONFIRM YES ...)
7. Choose install zip from sd card
8. Choose choose choose zip from sd card
9. Choose archive
10. Pop up menu, click yes
11. We are waiting for the archive to be established.
12. Next, select the reboot system now

Installing patches via TWRP
1. Drop the archive to the root of the sd card
2. Turn off the phone
3. Hold down the vol.- key and the ON / OFF button
4. Choose install zip from sd card
5. Select choose choose zip from sd card
6. Choose archive
7. Pop up menu, click yes
8.We wait until the archive is installed.
9. Next select reboot system now

Installing CWM / TWRP recovery on your phone
1. methodLIGHTwithout computer
Recovery set through the program MobileUncle Tools
Instruction

2. way with computer
CWM Recoveryhttp://yadi.sk/d/8BDFhT9WCVQpW
Installation Instructions:
1. Unpack the archive.
2. Turn on debug mode on your smartphone.
3. We get the root went through MtkDroidTools
4. Run the batch file (restore_recovery)
You can also through FlashTool or MtkDroidTools (check checksums immediately).

TWRP Recoveryhttp://yadi.sk/d/v6U5T0l8DYKe9from - = Banderlog = -
Install via FlashTool as well as CWM

Backup and firmware recovery using TWRP recovery
Backup
We go recovery TWRP->Backup, check the checkboxes on all items Select partitions to back Up, put a checkbox to enable compression Enable compression
Then you can copy the folder TWRP \ BACKUPS \ "Backupa name from the SD phone to the computer (otherwise it will be Backupa creation date). (Do this not to lose our Backup firmware)
Recovery
We go recovery TWRP->Restore, select by name, saved Backup, check the checkboxes on all items Select partitions to restore and right-click to start the restore.

Instructions for Root Access
Root is obtained using the programFramaroot

IMEI repair instructions
If IMEI is stuck, then just throw the file from the factory clean backupnvram.binand restore it throughMtkDroidTools(sewn underroot shell) (debugging in android should be enabled)

Easy way!does not always work
Attention! IMEI will fly off the next time you flash and reset the firmware!
1) Download patches =>PATCH_NVRAM;
2) We put through the mod. Recovery (TWRP): Patch NVRAM Fixing first, then Patch IMEI Fixing;
3) ALL!

More ways to repair IMEI

Instructions for creating a SWAP section

Instructions for the restoration of the radio module


miscellanea
If heavy games crash.

Disabling driver signature verification for their installation (for x64 systems)
During system bootup, press F8 and get into the boot options selection menu. Here we select “Disable mandatory driver signature verification” and press Enter. This action will load Windows 7 in a special mode without checking the driver signature, you can install any drivers.

Resetting the pattern without wipe via custom recovery

Patch to increase FPS

Council to reduce energy consumption
Turning off the unused frequencies of the radio module (for Russia and the CIS):
  1. Launch the "Engineering menu" (or dial the code in the dialer*#*#3646633#*#*or put the programMTK Engineering ModeorMobileuncle MTK Tools);
  2. In the menu that opens, select "Band Mode" ->SIM1;
  3. We remove the tick from the points:PCS1900, GSM850
  4. Press SET

Repeat the same forSIM2;
If you do not use 3G, you can also remove the check mark from the point "WCDMA-GSM-900".

When using 3G mode and in case you do not use the SIP protocol, you can reduce the power consumption for communication by disabling the mandatory registration of IMS in the network.
For this:
  1. In the dialer dial the code*#*#4636#*#*;
  2. In the menu that opens, select "Information about the phone";
  3. Click the button "IMS Registration Required" should be "disabled".
  4. We fix the result by rebooting.

Original

Increase the volume of sound on custom firmware
1. Launch the "engineering menu" (Started by dialing code in the dialer*#*#3646633#*#*or put the programMTK Engineering ModeorMobileuncle MTK Tools).
2. In the EngineerMode menu that opens, go to the "Hardware Testing" tab.
3. Select item "Audio".
4.In each of the "Normal Mode", "Headset Mode", "LoudSpeaker Mode" items, set Max Vol. = Forum and press the "Set" button.
5.In the item "Headset_LoudSpeaker Mode" we change two values ​​of "Max Headset" and "Max Speaker" to 160, without forgetting to press the "Set" button.
6. We close everything and check the volume of the sound.

Limiting background processes

Universal patch for porting firmware
Patch for porting firmware to our device!(porting from the Donors phone)
Porting firmware to MTK6572(porting by computer)

Firmware donors


Survey Screenshots
Attached Image



M
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.



Post has been editedklich007 - 23.07.17, 19:46
mysteryx7777
Message#22
27.11.13, 16:57
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 890
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  82  +

abd shell su is not enough for me, I need adb root. It is clear that this can be done by rebuilding boot.img with the necessary default options and flashing it into the phone.

Well, I'll think of something.
Are you only interested in this option? Just here the structure of the system partitions is somewhat different than that of mtk6575-77.
And it hangs after the message "--- Press the Restore Data button in the lower right corner of the phone screen": you press this button on the phone, a confirmation appears that the data has been restored, the tool turns the progress bar in a circle, and the process hangs the command: adb .exe "-d shell while! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do:; done
If you help to understand why, I will be very grateful.

Root (more precisely, access to su) using Framaroot is obtained, it works exactly.

The program will ask (get the root went using the already existing root (something like this)
Then submit requests on the screen (that process should be)
If everything is successful, the program will write the root was received before the reboot.
Well, the debugging mode does not forget.

Post has been editedmysteryx7777 - 27.11.13, 16:59
- = Banderlog = -
Message#23
27.11.13, 20:34
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

heh I collected TWRP recovery, so the flashlight swears at the Cheksum. Well, okay ... I have to think.

ps. put all the same

Post has been edited- = Banderlog = - - 27.11.13, 21:18
zuz666
Message#24
27.11.13, 22:40
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 163
Check in: 10.11.13

Reputation:-  10  +

Onrock @ 11.26.2013, 21:42*
It is possible in more detail how? My Backup button in MtkDroidTools is gray and I don’t click

If you only need nvram.img, then:
1. download IMEI_util from the header;
2. unpack the archive;
3. turn on USB debugging mode on the smart and connect it to the computer;
4. Run nv_backup.bat from the folder where the archive was unpacked.

Naturally, you need an adb driver.

And, here's how to revive MtkDroidTools until I understood, you need to see the entire sequence of commands that it performs. Such a feeling that he wants to use some kind of exploit to get root access, although su already exists (obtained using Framaroot) and adb.exe shell su -c works fine (the same nv_backup.bat does just that) .

Post has been editedzuz666 - 27.11.13, 22:47
Danas7777
Message#25
28.11.13, 10:11
Ego Sum Qui Sum
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1859
Check in: 17.10.09
Sony Ericsson Xperia Neo V

Reputation:-  456  +

- = Banderlog = - @ 11/27/2013, 21:34*
put all the same
iiiii? can we expect him to appear here? :)


--------------------
- = Banderlog = -
Message#26
28.11.13, 10:23
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

I did not test it completely. Put looked and rebooted. But he asked me before rebooting: "Os not installed! Reboot?" This is despite the fact that the system is. Here I will do the deodex on the weekend and try to flash it from it. :)
onrock
Message#27
28.11.13, 14:50
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

mysteryx7777 @ 11.27.2013, 16:57*
The program will ask (get the root went using the already existing root (something like this)
Then submit requests on the screen (that process should be)
If everything is successful, the program will write the root was received before the reboot.
Well, the debugging mode does not forget.


Debugging on and off tried, no sense. All drivers are installed. The program does not ask anything .. On the phone, I click "Recover data" after a while - "Data is restored" and everything is on it ...

That's all hanging in this position:
Attached Image


zuz666 @ 11.27.2013, 22:40*
If you only need nvram.img, then:
1. download IMEI_util from the header;
2. unpack the archive;
3. turn on USB debugging mode on the smart and connect it to the computer;
4. Run nv_backup.bat from the folder where the archive was unpacked.

Naturally, you need an adb driver.

And, here's how to revive MtkDroidTools until I understood, you need to see the entire sequence of commands that it performs. Such a feeling that he wants to use some kind of exploit to get root access, although su already exists (obtained using Framaroot) and adb.exe shell su -c works fine (the same nv_backup.bat does just that) .


Thanks for the instruction, I will try

Post has been editedonrock - 28.11.13, 14:58
- = Banderlog = -
Message#28
28.11.13, 19:10
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

I ported to the left for s4004m. wishing to test write.
Attached Image
Attached Image
Attached Image
Attached Image


Post has been edited- = Banderlog = - - 28.11.13, 19:15
zuz666
Message#29
28.11.13, 20:04
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 163
Check in: 10.11.13

Reputation:-  10  +

Onrock @ 11/28/2013, 5:50 PM*
Thanks for the instruction, I will try

I forgot to add that after starting the nv_backup.bat batch file on the phone screen there will be a request from SuperSU (or other software that you use to confirm the launch via su) to allow the launch there.

Here I found a clearer message about using MTKDroidTools:DNS S5301 - Firmware (Post # 21475812)
As you can see, after pressing the restore button, the phone reboots, during which MTKDroidTools appear to install su and SuperSU. It turns out that since we used Framaroot, which has already done all this, it is possible that if you remove su (root) and SuperSU and then use MTKDroidTools, everything will take off. It is also recommended to disable the antivirus, I have 360 ​​Mobile Security installed for fun, after checking for some vulnerabilities fixed, maybe they are used by MTKDroidTools to get root access.

Post has been editedzuz666 - 28.11.13, 20:20
mysteryx7777
Message#30
28.11.13, 21:44
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 890
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  82  +

I ported to the left for s4004m. wishing to test write.

The last MIUI dvuhsimochnoy port probyval?
LewaOS Ported with texet x-basic?

heh I collected TWRP recovery, so the flashlight swears at the Cheksum. Well, okay ... I have to think.

It seems that the official support of mtk6572 from them has not yet been .....
Copal off. sorts under 6575 6577 series. ?
Well then, how do you finish it out.
Expanding slowly looking ..... Excellent! I am glad that the enthusiasts have not abandoned the smartphone.

Post has been editedmysteryx7777 - 28.11.13, 21:52
- = Banderlog = -
Message#31
28.11.13, 21:50
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

mysteryx7777 @ 11.28.2013, 22:44*
The last MIUI dvuhsimochnoy port probyval?

not yet. only yesterday I bought a phone :)

mysteryx7777 @ 11.28.2013, 22:44*
Kopal off sortsy under 6575 6577 series. ?

not. atTWRPmakercollected
Attached fileTWRPmaker.rar(10.82 MB)

ps. boot.img is also a bit faked. Added support for init.d and root shell scripts with adb shell

Post has been edited- = Banderlog = - - 28.11.13, 21:58
mysteryx7777
Message#32
28.11.13, 21:58
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 890
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  82  +

not. in TWRPmaker collected

Now it's clear what's the matter.
I'll go get some ...

There is no support for mtk6572 proca + maybe you have chosen the wrong type of file system.
The reaction is due to the fact that the recovery cannot read the systems section correctly.
The file needs to be edited, on the tea-iphone forum there is a tool for unpacking the recovery (edit the partition table in the recovery with it)

Post has been editedmysteryx7777 - 28.11.13, 22:09
- = Banderlog = -
Message#33
28.11.13, 23:23
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

mysteryx7777 @ 11.28.2013, 22:58*
edit partition table in recovery

thank you Twrp recovery is really true version 2.3 but I think uncritically. I do not know which cwm in the header, but I made version 6.0. I'll post it tomorrow evening. And another deodex firmware stock under cwm or twrp.

ps. Just noticed your question:
mysteryx7777 @ 11.28.2013, 22:44*
LewaOS Ported with texet x-basic?

yes with him

Post has been edited- = Banderlog = - - 28.11.13, 23:27
mysteryx7777
Message#34
28.11.13, 23:55
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 890
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  82  +

I do not know which cwm in the header, but I made version 6.0

CM. signature
onrock
Message#35
29.11.13, 07:26
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

zuz666 @ 11.28.2013, 20:04*
if you delete su (root) and SuperSU


How to remove them correctly? I checked everything: drivers, debugging, SuperSU deleted .. Same.
MTKDroidTools, first of all, is needed in order to get a full backup. Previously, there was ZTE V790, I installed a custom recovery - I made a backup and it was not scary to do anything with the phone)
mysteryx7777
Message#36
29.11.13, 11:07
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 890
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  82  +

MTKDroidTools, first of all, is needed in order to get a full backup.

Try another version of the program, and preferably on a 32-bit axis (if possible)
It turns out that since we used Framaroot, which has already done all this, it is possible that if you remove su (root) and SuperSU and then use MTKDroidTools, everything will take off.

The program itself offers to do it through the root (if installed), then you need to confirm the requests on the screen. The program uses an exploit to gain access to the smartphone (therefore, we cut down the antivirus programs). The exploit is harmless.
Without root, it gives an error (this smartphone can be ruled by another method and a link to the xda forum will give

Post has been editedmysteryx7777 - 29.11.13, 11:12
- = Banderlog = -
Message#37
29.11.13, 17:37
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

TWRP Recover for our device. put through flashlight as well as CWM

Attached fileTWRP_2.3_recovery_S4004M.img(5.8 MB)


Post has been edited- = Banderlog = - - 29.11.13, 22:38
onrock
Message#38
29.11.13, 18:30
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

mysteryx7777 @ 11/29/2013, 11:07*
Try another version of the program, and preferably on a 32-bit axis (if possible)


It did not even help what exactly ...
I made a reset to the factory settings, after which I downloaded and installed MTKDroidTools 2.4.8, everything went fine! Windows 7 64bit

Post has been editedonrock - 29.11.13, 18:31
- = Banderlog = -
Message#39
30.11.13, 09:46
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

as promised, I give a link to stockware for CWM. (custom-made) How to install:

1. You should have CWM recovery
2. Drop the archive to the root of the sd card
3. Turn off the phone
4. Press the vol.- key and the ON / OFF button.
5.WIPE DATA / FACTORY RESET (CONFIRM YES ...)
6.WIPE CACHE PARTITION (CONFIRM YES ...)
7. Choose install zip from sd card
8. Choose item choose zip from sd card
9. Choose archive
10.Water menu, click yes
11.We wait until the archive is installed.
12. Next select reboot system now

I removed in the firmware everything related to Yandex and other unnecessary progs (VKontakte classmates) added init.d script support to boot.img, added MtkTweak, select the balanced mode and recommended 512 memory mode in it.

S4004M_deodex.zip 242.3 MB
onrock
Message#40
30.11.13, 20:51
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

- = Banderlog = - @ 11/30/2013, 09:46*
S4004M_deodex.zip 242.3 MB


Put without wipes true, MtkTweak what gives?
- = Banderlog = -
Message#41
30.11.13, 21:06
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3621
Check in: 17.09.08
Lenovo Moto G5s Plus XT1805

Reputation:-  1260  +

Onrock @ 11/30/2013, 9:51 PM*
MtkTweak what gives?

should consume less battery. and it is necessary to check. It seems to be written for 6577 prots
DNS
 

59 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 16:40