> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


59 pagesV  1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> DNS S4004M - Official firmware (Android OS 4.2.2)
Divers-m
Message#1
05.11.13, 22:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 197
Check in: 17.05.14
LG Q6

Reputation:-  35  +

DNS S4004M - Firmware (Android OS 4.2.2)
PictureS4004M
Description | Discussion | Firmware

Drivers and Utilities

Firmware
Official firmware
Unofficial firmware

Instructions
BEFORE FIRMWARE, IT IS MANDATORY TO MAKE A FULL BECUP FIRMWARE!
with helpMtkDroidToolsorFlashtool.
Installing drivers from - = Banderlog = -

Take out the skatter

Sound problems

For those who do not see a TWRP or CWM cdcard (for PC)
1. DownloadingSD Formatter
2. Unpack and install, run.
3. Click option, in the format type tab, select Full (over write).
4. The second item is set to ON.
5. Click OK and wait.

Instructions for firmware throughFlashtool
1. Open the Flashtool utility.
2. Next, in front of the scrater loading file, use the appropriate button to select the scrater file (located in the android folder)
3. When all files appear, remove the checkbox with preloader s4004m.bin ..
4. Turn off the phone (disconnect from the PC).
5. Click the download button.
6. Several lilac progress bars will run and the program will stop.
7. Connect the device to the PC (firewood must be installed) (the device must be turned off).
8. If everything goes right, the device will be detected and the firmware process will go.
9. If it does not work, try to pull the battery.

Removing the system program through the Root Explorer

Instructions for installing the firmware throughCWM / TWRP Recovery
1. You must have CWM / TWRP recovery
2. We dump the archive in the root of the sd card
3. Turn off the phone
4. Hold down the vol.- key and the ON / OFF button
5. WIPE DATA / FACTORY RESET (CONFIRM YES ...)
6. WIPE CACHE PARTITION (CONFIRM YES ...)
7. Choose install zip from sd card
8. Choose choose choose zip from sd card
9. Choose archive
10. Pop up menu, click yes
11. We are waiting for the archive to be established.
12. Next, select the reboot system now

Installing patches via TWRP
1. Drop the archive to the root of the sd card
2. Turn off the phone
3. Hold down the vol.- key and the ON / OFF button
4. Choose install zip from sd card
5. Select choose choose zip from sd card
6. Choose archive
7. Pop up menu, click yes
8.We wait until the archive is installed.
9. Next select reboot system now

Installing CWM / TWRP recovery on your phone
1. methodLIGHTwithout computer
Recovery set through the program MobileUncle Tools
Instruction

2. way with computer
CWM Recoveryhttp://yadi.sk/d/8BDFhT9WCVQpW
Installation Instructions:
1. Unpack the archive.
2. Turn on debug mode on your smartphone.
3. We get the root went through MtkDroidTools
4. Run the batch file (restore_recovery)
You can also through FlashTool or MtkDroidTools (check checksums immediately).

TWRP Recoveryhttp://yadi.sk/d/v6U5T0l8DYKe9from - = Banderlog = -
Install via FlashTool as well as CWM

Backup and firmware recovery using TWRP recovery
Backup
We go recovery TWRP->Backup, check the checkboxes on all items Select partitions to back Up, put a checkbox to enable compression Enable compression
Then you can copy the folder TWRP \ BACKUPS \ "Backupa name from the SD phone to the computer (otherwise it will be Backupa creation date). (Do this not to lose our Backup firmware)
Recovery
We go recovery TWRP->Restore, select by name, saved Backup, check the checkboxes on all items Select partitions to restore and right-click to start the restore.

Instructions for Root Access
Root is obtained using the programFramaroot

IMEI repair instructions
If IMEI is stuck, then just throw the file from the factory clean backupnvram.binand restore it throughMtkDroidTools(sewn underroot shell) (debugging in android should be enabled)

Easy way!does not always work
Attention! IMEI will fly off the next time you flash and reset the firmware!
1) Download patches =>PATCH_NVRAM;
2) We put through the mod. Recovery (TWRP): Patch NVRAM Fixing first, then Patch IMEI Fixing;
3) ALL!

More ways to repair IMEI

Instructions for creating a SWAP section

Instructions for the restoration of the radio module


miscellanea
If heavy games crash.

Disabling driver signature verification for their installation (for x64 systems)
During system bootup, press F8 and get into the boot options selection menu. Here we select “Disable mandatory driver signature verification” and press Enter. This action will load Windows 7 in a special mode without checking the driver signature, you can install any drivers.

Resetting the pattern without wipe via custom recovery

Patch to increase FPS

Council to reduce energy consumption
Turning off the unused frequencies of the radio module (for Russia and the CIS):
  1. Launch the "Engineering menu" (or dial the code in the dialer*#*#3646633#*#*or put the programMTK Engineering ModeorMobileuncle MTK Tools);
  2. In the menu that opens, select "Band Mode" ->SIM1;
  3. We remove the tick from the points:PCS1900, GSM850
  4. Press SET

Repeat the same forSIM2;
If you do not use 3G, you can also remove the check mark from the point "WCDMA-GSM-900".

When using 3G mode and in case you do not use the SIP protocol, you can reduce the power consumption for communication by disabling the mandatory registration of IMS in the network.
For this:
  1. In the dialer dial the code*#*#4636#*#*;
  2. In the menu that opens, select "Information about the phone";
  3. Click the button "IMS Registration Required" should be "disabled".
  4. We fix the result by rebooting.

Original

Increase the volume of sound on custom firmware
1. Launch the "engineering menu" (Started by dialing code in the dialer*#*#3646633#*#*or put the programMTK Engineering ModeorMobileuncle MTK Tools).
2. In the EngineerMode menu that opens, go to the "Hardware Testing" tab.
3. Select item "Audio".
4.In each of the "Normal Mode", "Headset Mode", "LoudSpeaker Mode" items, set Max Vol. = Forum and press the "Set" button.
5.In the item "Headset_LoudSpeaker Mode" we change two values ​​of "Max Headset" and "Max Speaker" to 160, without forgetting to press the "Set" button.
6. We close everything and check the volume of the sound.

Limiting background processes

Universal patch for porting firmware
Patch for porting firmware to our device!(porting from the Donors phone)
Porting firmware to MTK6572(porting by computer)

Firmware donors


Survey Screenshots
Attached Image



M
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.



Post has been editedklich007 - 23.07.17, 19:46
Neko
Message#2
08.11.13, 19:40
LG: Life's Good ™
*****
[offline]

Group: Banned
Messages 295
Check in: 21.06.13
MTS Trendy Touch 547

Reputation:-  16  +

Guys I can siphon you with a half-string ala Xperia for flashing through Flashtool. Tester who wants to earn a couple of pluses there?


--------------------
Wake Me Up! : rolleyes:
ozyab09
Message#3
09.11.13, 10:07
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 206
Check in: 18.12.10
Asus ZenFone 4 A400CG

Reputation:-  8  +

And what version of android?
And what does it supposedly work in it?
mysteryx7777
Message#4
09.11.13, 10:28
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

And what version of android?

Look at the cap.
And what does it supposedly work in it?

Googled.

Post has been editedmysteryx7777 - 09.11.13, 10:28
mysteryx7777
Message#5
09.11.13, 20:56
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

Do you guys get a root on this machine?

Instructions in the topic header (link to the program)

Post has been editedmysteryx7777 - 09.11.13, 20:56
TeamLead
Message#6
10.11.13, 01:54
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 53
Check in: 06.11.13
DNS S4004M

Reputation:-  4  +

Why so many topics on the DNS S4004M google? well create one merge everything into it ches word

-
Smarmarut does not rue any dick just stupidly says "I can not cheat", Chinese ruts rule twice, how to remove the Chinese menu from the recovery?

Post has been editedTeamLead - 10.11.13, 02:01
mysteryx7777
Message#7
10.11.13, 08:27
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

Smarmarut does not rue any dick just stupidly says "I can not cheat", Chinese ruts rule twice, how to remove the Chinese menu from the recovery?

With debugging try or on the contrary.
Why so many topics on the DNS S4004M google? well create one merge everything into it ches word

Everything is as it should be: 1 discussion topic of the smartphone dns s4004m 2 topic of discussion of the firmware dns s4004m
Two is the norm.
TeamLead
Message#8
10.11.13, 17:21
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 53
Check in: 06.11.13
DNS S4004M

Reputation:-  4  +

rum manager writes device notes saported 8)) when you try to install CWM, sho choose?

system recovery 2
system recovery 3

???
mysteryx7777
Message#9
10.11.13, 18:30
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

rum manager writes device notes saported 8)) when you try to install CWM, sho choose?

system recovery 2
system recovery 3

Rum manager does not support him (in fact)
I can give an image of custom recovery if you want (knock on qms if needed)

Eparynaya theator and how to remove the menu from the menu from the backup?

How much can you say? In this device, the system key shortcuts are confused

The mod factor was not translated (I'm working on it + trying to restore the key combinations)
hop-top
Message#10
18.11.13, 10:00
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 213
Check in: 19.07.12

Reputation:-  7  +

Here's how kaktotak! rut tpoluchit mono here with this Romaster as they say in 2 clicks. tested on 4 smart devices Gsmart. Informer702 tablet on Dns s4004m smart. And the megaphone login! Even the firewood did not put everything himself, but the prog did. Romaster makes full access to Andrew, one cant is the language of China.


--------------------
DEXP Ixion EL250 Amper E. DEXP Ixion MS350 ROCK PLUS.
hop-top
Message#11
18.11.13, 10:17
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 213
Check in: 19.07.12

Reputation:-  7  +

mysteryx7777 @ 11.11.2013, 23:30*
Eparynaya theator and how to remove the menu from the menu from the backup?

Strange in my normal English. And China is the phone's tests, well, there is a screen, a network. Well, all the gesezo testetsa is shorter. Turning on the logo is on, you can run the Sandman in a safe mode. I can’t know why I'm behind the times, but for me it's new! : blush:


--------------------
DEXP Ixion EL250 Amper E. DEXP Ixion MS350 ROCK PLUS.
mysteryx7777
Message#12
18.11.13, 19:05
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

Strange in my normal English. And China is the phone's tests, well, there is a screen, a network. Well, all the gesezo testetsa is shorter. Turning on the logo is on, you can run the Sandman in a safe mode. I can’t know why I'm behind the times, but for me it's new! : blush:

All the Chinese fashion factors, you entered the recovery (it is in normal English)
+ On the DNS S4004M, the mod factor call and recovery keys are mixed up.

Post has been editedmysteryx7777 - 18.11.13, 19:07
zuz666
Message#13
24.11.13, 13:54
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 10.11.13

Reputation:-  10  +

Tell me, in /default.prop: ro.debuggable = 0, as a result, adb root swears "adbd cannot run as root in production builds". It was so out of the box. As a result, for example, MTKdroidTools and everything that requires root rights does not work.
There is a solution? If you fix it in /default.prop (root access is on the device) to change this parameter, it is restored after a reboot from ROM and the result is zero.
I wonder why not a word about it here.

/default.prop:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure = 1
ro.allow.mock.location = 0
persist.mtk.aee.aed = on
ro.debuggable = 0
persist.sys.usb.config = mass_storage
persist.service.acm.enable = 0
ro.mount.fs = EXT4


Post has been editedzuz666 - 24.11.13, 14:07
zuz666
Message#14
24.11.13, 15:30
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 10.11.13

Reputation:-  10  +

I looked from the boot.img header there /default.prop is the same. I do not understand, how do you then use MTKdroidTools?
zuz666
Message#15
24.11.13, 16:34
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 10.11.13

Reputation:-  10  +

The firmware from the DNS site and in the header are completely identical, explain what it means does not work if they are the same? Or updated on the site?
mysteryx7777
Message#16
24.11.13, 21:32
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

The firmware from the DNS site and in the header are completely identical, explain what it means does not work if they are the same? Or updated on the site?

I fixed the scraper file, took another program for the firmware and tweaked it.
On off. The site is a non-working program and a broken file scrater.
I looked from the boot.img header there /default.prop is the same. I do not understand, how do you then use MTKdroidTools?

I did not understand the question, everything works for me.
Tell me, in /default.prop: ro.debuggable = 0, as a result, adb root swears "adbd cannot run as root in production builds". It was so out of the box. As a result, for example, MTKdroidTools and everything that requires root rights does not work.
There is a solution? If you fix it in /default.prop (root access is on the device) to change this parameter, it is restored after a reboot from ROM and the result is zero.
I wonder why not a word about it here.

The debug mode is turned off by default, we turn it on with handles in the settings and we turn it on with handles.
It will not be received, this part of the firmware is closed for recording, the file will be restored.
Route is received by freymrut, debugging must be enabled.
After MTKDroidTools (with debugging enabled and a previously received root) will let you get the root went (you are unforgettable to respond to requests on the screen while MTKDroidTools is working)

Post has been editedmysteryx7777 - 24.11.13, 22:01
mysteryx7777
Message#17
24.11.13, 21:39
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

Tell me, in /default.prop: ro.debuggable = 0, as a result, adb root swears "adbd cannot run as root in production builds". It was so out of the box. As a result, for example, MTKdroidTools and everything that requires root rights does not work.
There is a solution? If you fix it in /default.prop (root access is on the device) to change this parameter, it is restored after a reboot from ROM and the result is zero.
I wonder why not a word about it here.

What makes you think that you need to edit this file? You just need to enable debugging.

Post has been editedmysteryx7777 - 24.11.13, 21:40
zuz666
Message#18
25.11.13, 19:41
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 166
Check in: 10.11.13

Reputation:-  10  +

On off. The site is a non-working program and a broken file scrater.

Thanks, it’s clear now, I just didn’t think that the changes in the PRELOADER section (considering that the instructions say "When all the files appear, remove the checkbox from the preloader s4004m.bin") have some meaning. All other files match bytes per byte. The explanation in the header, that the firmware from the site does NOT work, is misleading, as if the firmware itself is broken or something like that. : yes2:

I did not understand the question, everything works for me.
And it hangs after the message "--- Press the Restore Data button in the lower right corner of the phone screen": you press this button on the phone, a confirmation appears that the data has been restored, the tool twists the progress bar in a circle, and the command hangs in the processes: adb .exe "-d shell while! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do:; done
If you help to understand why, I will be very grateful.

Root (more precisely, access to su) using Framaroot is obtained, it works exactly.

What did you take to edit this file? You just need to enable debugging.

Mmm, of course, USB debugging is enabled. That's what I meanthttp://forum.xda-developers.com/showthread.php?t=1794203in section 3.
abd shell su is not enough for me, I need adb root. It is clear that this can be done by rebuilding boot.img with the necessary default options and flashing it into the phone.

Post has been editedzuz666 - 25.11.13, 19:43
onrock
Message#19
26.11.13, 18:42
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

mysteryx7777 @ 11.11.2013, 22:12*
Be sure to back up the system with the MtkDroidTools program, the nvram.bin file, which can be very useful in the future.


It is possible in more detail how? My Backup button in MtkDroidTools is gray and I don’t click in any way ..
onrock
Message#20
26.11.13, 18:56
-_-_-_-_-_-_-_-_-_-
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 426
Check in: 25.08.13
Huawei Y5 II CUN-U29

Reputation:-  65  +

Quote ([email protected], 00:39)
I didn’t understand the question, everything works for me. And I’m hanging after the message "--- Press the Restore Data button in the lower right corner of the phone screen": you press this button on the phone, a confirmation appears that the data has been restored, the tool turns the progress bar around , and in processes the command hangs: adb.exe "-d shell while! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do:; done
If you help to understand why, I will be very grateful.


Also...
mysteryx7777
Message#21
27.11.13, 16:49
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 916
Check in: 24.06.11
Xiaomi Mi A2 4/64

Reputation:-  83  +

It is possible in more detail how? My Backup button in MtkDroidTools is gray and I don’t click in any way ..

You must first get the root shell
DNS
 

59 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 18:51