> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


1058 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Motorola Moto X - Firmware
mainbord
Message#1
02.11.13, 22:08
default
*********
[offline]

Group: FAQMakers
Messages 5377
Check in: 09.12.07
Motorola DROID Mini

Reputation:-  1136  +

Motorola Moto X - Firmware
PictureMotorola Moto X (Gen1) 2013, codename "Ghost" - XT1049, XT1050, XT1052, XT1053, XT1055, XT1056, XT1058, XT1060
Description | Discussion | FAQ | Purchase | Firmware | AOSP and CM based firmware (Android 5.0.x OS)

Be sure to read
OTA can only be installed on a drain with unmodified partitions of the system, kernel, modem, recovery and logo, otherwise the consequences are unpredictable. PTA is not recommended for use, as it is potentially dangerous. There are full firmware in the header, sew them, preferably via RSD Lite.

��������,Attention,Achtung ����� ���������� ��� �� ���� ����������� ������ �� 5.1.0 download



Russian language in official firmware 5.0.2 and 5.1 Lollipop is present in stock. Ukrainian and Belarusian is not.
Find out what version of your phone you can by going to fastboot / barcodes
  • The material submitted by the authors is unofficial, in the event of unsuccessful firmware or loss of the device, the author of the software and the administration of the resource are not responsible!
  • All actions are performed at your own risk! If everything suits you in your current firmware, or you don’t know why you need to change it, then you don’t need to change the firmware. Anyone who is scary do not go to the topic! Anyone who wants to leave without hemorrhoids, read above.
  • Before any actions, even if you are 100% sure that you are doing the right thing, make a backup copy of the firmware (program), and also look at what firmware you have. Before asking a question, read the topic header, FAQ, and use the search on the topic.
  • Images without spoilers, messages off-topic (offtopic), flood, insults, uninformative messages (it works for me, did that, put it, thanks, I will try, etc.), as well as questions that are stated in the header or have already been discussed (use search) and answers to them will be regarded as ignoringforum rulesand deleted without warning. To mandatory reviewMessage designandWorking with Images on the forum.
  • Be mutually polite! It’s customary at our forum to say "Thank you" by increasing your reputation by clicking on the "+" button.
  • If you have less than 15 messages, click on the "Complaint" button in a useful message for you (on the left below, avatars and reputations) and tell them what to put the "+".
  • Suggestions for filling and updating caps write to PM curator.

  • You can install unofficial firmware or firmware from another region only on a device with an unlocked bootloader.
  • Lowering the official firmware version of the OS - Extremely not recommended! All your downgrade actions can lead to fatal consequences for your device!
  • With GravityBox installed, ART does not turn on! The same applies to other applications that do not support ART, when you turn on ART, the OS checks if all applications support it, if not all, dalvik is turned on.
  • OTA update is installed only on the official unmodified firmware and native recovery. An attempt to install OTA on a modified firmware leads to a cyclic reboot
  • In the absence of telepaths on the forum and a huge variety of versions of Moto X, a huge request to put in the signature model and the original phone operator (AT & T, Verizon, Retail)
Drivers and Utilities
Motorola Device Manager- driver + some garbage
Motorola Mobile Drivers 6.4.0- drivers only (support WinXP-Win10 32 / 64bit)
RSD Lite 6.2.4- official flasher (WinXP-Win10 32 / 64bit support)

A set of essentials for working withadbandfastboot - Attached fileadb_fastboot.zip(46.86 MB)
Inside the archive:adb, set of fastboot commands, installing TWRP, file manager, changing the logo, cleaning the drain from garbage
Official firmware
Filefactory folder- the most current official Motorola firmware (use Ctrl + F to filter the desired model)
Folder on lolinet- If you have not found the right, look here.
Firmware Center- or here
Cloud with official firmwaresupportsCrash] [
Cloud with official firmwaresupportsIDLeon
Unofficial firmware
An unlocked bootloader is required, with only a minor modification of the factory firmware available

AOSP and CM firmware (OS 5.x, 6.x)- a separate topic
MIUI for Moto X- postTSHIP

Firmware based on stock 5.1, with elements of Android 6.0by VitaTaf
Russified 4.4.4 with rootfromS5610_best
Deodex Lite 4.4.4 byCrash] [, 4.4.4 for locked
Deodex Lite 5.1 fromCrash] [, 5.1 for locked- Do not install on LPAS! See below
9008 patch 5.1 for locked XT1058 ATT and XT1060 VZW(root, xposed, busybox)
9008 firmware 5.1 for locked XT1049 RW, XT1058 ATT and XT1060 VZW(root, xposed, busybox, ViperFX, etc)
Instructions

On the XT1058 from AT & T with firmware 4.4.4 and 5.1 there is no possibility to open the bootloader

Mini FAQfromCrash] [
Safestrap, works only on Android 4.4!


UPDATE: The instructions below will be ordered or deleted.
Android Pay
Please do not litter the topic by discussing Android Pay, get acquainted with someone else's experience on the links above
Kernel, modem, recovery
Kernels and recovery can only be changed on devices with an unlocked bootloader. Modem - on any, acc. Android version
  • zwliew Kernel- custom kernel for stock firmware 4.4.4
  • @tycoo Kernel- custom kernel for stock firmware 5.1 (to download, click the "Downloads" tab at the top)
  • army9000 Kernel- custom kernel for stock firmware 5.1, based on @tycoo, zwliew, CM13. You can configure this and other kernels throughKernel adiutor.
The radio (modem) is in the NON-HLOS.bin and fsg.mbn files. Stitch as follows:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Attached filemodem_Moto-X_latest.7z(77.42 MB)
- collection of modems
Past polls
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
FAQ Topics Firmware
Bought Moto X, who will tell me what my model?
The exact model, as well as IMEI, serial number and production date, you can find out by going to Fastboot>Barcodes. If instead of the model (XT ****) some zeros, ask in the subject. "6130A", "6131A" = XT1058.

How to get into the "fastboot", what is it?
fastboot - pre-boot menu (and a set of commands). Enter it like this:
  • when the phone is turned off, hold down the Power and Vol Down buttons for 2-3 seconds, release.
  • turn off or restart the phone with the cable connected to the charging or computer, after holding Vol Down.
  • execute the commandadb reboot-bootloader . There should be drivers, adb itself, access allowed, etc.
While in fastboot, you can get detailed information about the phone by running fastboot_console.bat (execute the command getvar all ), located in the archive adb_fastboot.zip (see in the header, download, unpack, drivers should also be installed)

I'm on Beeline, Lollipop firmware, problem with displaying dialed numbers
Possible solution seehere. Motorola's comment, roughly: "the problem is in the Beeline hardware settings, nothing depends on us."

Which of the firmware in Russian?
All official 5.0.2 and 5.1 Lollipop (Ukrainian and Belarusian are not), as well as numerous custom modifications (including KitKat).

Describe the process of returning to the factory stock firmware, additionally I want to root and recovery
On smart, go to fastboot, download the official firmware forhismodel (make sure this is important), unpack it into a folder, then open the xml file with the RSD Lite program, click Start, ready. Note: if there are several xml files, select flashfile.xml, which additionally contains a complete cleaning of the previous data and user settings; servicefile.xml does not clean anything, only alters system partitions. Servicefile.xml can also be used to bring sections in order before installing OTA. You can also flash any partition using fastboot.exe (for advanced users).

For smart phones with an unlocked bootloader, the instruction has a continuation - we will sew recovery and get root-rights. After the installation of the system is completed and the Android is logged in, we copy the SuperSU 2.65 zip archive into the internal memory of the smart card (search on the forum / Google), we will need it later. Turn off the smart and go to the fastboot menu. Now we sew up the recovery. We download adb_fastboot.zip from the header, unpack it into a folder, launch the flash_TWRP_recovery.bat file, select the version we want to sew, confirm, and immediately after the successful completion of the operation, go to the Recovery item with the top volume button! Otherwise, the protection will not save the changes and the recovery will remain official. After the splash screen, TWRP will ask if we want to make changes to the system, of course we want, then go to Install and find the SuperSU archive among the files. Install, look for a reboot into the system among the menus. Everything.

How to sew the modified firmware from the craftsmen?
If TWRP is not worth it, look above how to deliver. Go to TWRP, find the internal memory of a smart card in My computer, throw a zip there with the desired firmware (or connect a USB flash drive via OTG), and choose Install in TWRP. Depending on the preferences of the firmware author, it may be necessary to pre-wipe the System section.

What do they mean when they say "loader"?
To put it simply, this is an area of ​​internal memory, stuffed by the manufacturer with protective functions, for example, a ban on changing the contents of the system partitions that contain the firmware. Therefore, users who want to customize the smartphone in their own way, seek to unlock the bootloader. Find out the status of the loader, i.e. it is locked (Device is LOCKED) or not (Device is UNLOCKED), as well as its version (for example, 30.B7) by going to fastboot.

I can not sew someone else's firmware, and roll back too, why?
This Motorola and Qualcomm made sure that you do not ruin your phone. Experiments are possible only when the boot loader is unlocked and at your own peril and risk, and of course you lose the guarantee.

How to find out what firmware is on the phone now?
In Settings, About phone. More details on the response commandfastboot getvar allwe look the version of the system, the loader, its status. With a locked bootloader, rollback to previous firmware versions is not possible, it is possible on an unlocked one. The loader can not be rolled back anywhere, so it is extremely important to know its version. Matching bootloader / system pairs:
  • 30.B2 = 4.4 - you can get the root, see Safestrap.
  • 30.B4 = 4.4.2 - you can open the bootloader (and get the root) for $ 25, see Sunshine.
  • 30.B7 = 4.4.4, 30.BC = 5.0.2, 30.BD = 5.1.0, 30.BE = 5.1.0 and LPAS * - if the AT & T model is 1058 or 1060 (not Dev Edition), the bootloader is locked permanently (if you did not have time to unlock it before the upgrade, of course)
Let's list all known models with exactlyofficially unlockablebootloader: XT1049 (ACG), XT1050, XT1052, XT1053, XT1055, XT1056. Models XT1049 (Republic Wireless), XT1058 (AT & T), XT1060 with bootloader version higher than 4.4.4 inclusive - it is impossible to unlock.

Heard about a version of the Developer Edition, tell me what it is
It is found only among XT1053 (GSM) and XT1060 (GSM / CDMA) models, it has a officially unlockable bootloader. On the cover, white, behind it is written "Developer Edition". The presence of the cover does not give a 100% guarantee, could be removed from another model.

Sell ​​cheap XT1055, why?
This is a CDMA model, GSM is locked.

Specifically, what frequencies does each model support?
Cmthe table, and there is the location of the antennas.

I asked, the connection fell off. Why?
Option three, and all are related to the correct definition of your model:
  • Tel XT1049 / 1056, you stitched the radio and disappeared GSM unlock. See instructions on how to return
  • Tel XT1052, and sew is not native firmware
  • telnot XT1052, and sew from XT1052.
I received OTA, I do not know whether to bet or not. Tell me
The answer is prepared, but for nowread.

I put a custom firmware, pops up the window "Remove Motorola Sensor Services Firmware", what to do
This is the author of the firmware has changed the work of the sensors. Click "Delete."

The problem with tvrp backups suddenly. The computer clearly does not see, TvRP itself sees and the root of the explorer sees a folder with 0 bytes
In your phone you can see it like this: / data / media / 0 / TWRP / BACKUPS / your serial number / your backup. To see the computer, you must be in TWRP. If it doesn’t see here, click ADB Sideload, cancel, try again. Or a very extreme measure - copy the file manager, going as part of TWRP, to a USB flash drive, or another folder in the root of the internal memory, or an OTG USB flash drive.

The model of the American operator Verizon, in the menu a bunch of "left" programs, how to remove?
The process of cleaning up annoying content is called debloating. In the presence of root-rights unnecessary simply delete the file manager. If there is no root, we block it with the adb command pm (for advanced), or with a convenient prog from Windows. See the debloat instructions. For the same link as to ban PTA.

I am sending an SMS, but it is empty, only some questions and spaces
In the SMS settings, change the "SMS encoding method" from "GSM 7-bit" to "Automatic".

In my statistics, the battery shows failures, especially after 30%
Change the battery to fresh. When buying, beware of fakes (found on both Aliexpress and Ebay). Stickers should not be, all the inscriptions on the battery stamped with paint. Officially produced only in 2013-2014. On both trading floors the original is slightly used, and this is the maximum that you can buy.

Why in the statistics of the battery eats "network connection" most of all? On 4.4.4 this was not!
It is believed that with a worn out battery, Lollipop writes off energy losses to poor communication quality, at which, as you know, the power consumption of the radio part increases. Google does not consider a bug; no one is going to fix it. If you are very worried, you can put the Xposed + moduleMobileRadioActiveFix. Also turn off all tracking-scanning functions in the WiFi settings.

Little holds the battery, what to do
See postMotorola Moto X - Firmware (OS 4.x)

Is it true that turbo charging is harmful, it is harmful to keep charging for a long time, and you need to “train” the battery?
All three statements are common myths. In short, the main damage to a smartphone's battery is brought by two things: increased temperature and full charge cycles. Try to charge as often as possible, not allowing a deep discharge (below 10%), and avoid overheating your smartphone (for example, do not play 3D games and charge at the same time in the heat of the sun). Everything else is possible. Moto X supports QuickCharge 1.0, use charging 15W or 25W from the Droid Turbo, or the proprietary Verizon Fast Charge, the mode will increase to 5V / 1.4A versus 1.1A with native charging.

How to enter the engineering menu, I want to change the order of networks
* # * # 4636 # * # *. If it does not work, we install Network, or Phone Info (Ad), or 4G LTE Switch, or Power Toggles, thousands of them from the market.

How to check the performance of the microphone?
* # * # 2486 # * # *, further CQA Menu Mode>Audio>Mic Loopback, plug in your headphones and check the audibility of each microphone. You can also check the operation of the camera, touch screen, etc. Another way to get into CQA Test is to select BP Tools or Factory in the fastboot menu. And look for among applications.

Sometimes a camera error started popping up. Soon kerdyk or is this the norm for Moto X?
Let's just say, any smart has weak spots, and Moto X is no exception. At risk of microphone (s), rear camera, wifi / bluetooth. Try clearing the data and cache of the Camera app. If it does not help, change to the factory firmware. If it does not help, "kerdyk". Change the camera module / motherboard.

Moved to Cyanogen, GPS barely crawls, what to do?
Reset the radio settings with two fastboot commands. Then launch GPS Status from Market and check the effect.
fastboot erase modemst1
fastboot erase modemst2

(the same teams will help with problems with the native modem, if they stitched someone else before; if they did GSM unlock, they would have to repeat it; with CDMA, do not do it without urgent need!)

WiFi and Bluetooth sliders are inactive, self-powered off
Or software problem or "iron". We try to flash the factory firmware, but it does not help, we carry it in for repair.

When enabled, it goes into fastboot, how to make it immediately load into Android?
If this is the only problem, run the fastboot oem fb_mode_clear command.

Explain why I can not go to the TWRP folder on Android 5.1-6.0
Bye English:https://twrp.me/faq/datamedia.html

Discussion participants use incomprehensible words like "wipe". Where to read about the terms?
Android - Glossary

To run an adb command, you need to plug in USB debugging, and where?
Seven times, tap on the "Build number" in "About phone", the item "For developers" will appear, enable "USB debugging" in it and confirm access if the smart requests

Remind, please, how to make a screenshot? And how to enter safe mode.
The screenshot is made by simultaneously pressing the Power + Vol Down buttons, you can boot up with a minimum set of applications if you have a boot problem by holding the Vol Down button, and the smart is restarted from any state by pressing the Power button for 15-20 seconds, then the Vol Down button if you need fastboot mode. Practice

Topics Curator - S5610_best

Post has been editedS5610_best - 11.08.18, 01:21
vivjen
Message#2
03.11.13, 13:43
Experienced
******
[offline]

Group: Banned
Messages 653
Check in: 13.01.09
Motorola Moto X

Reputation:-  33  +

SafeStrap laid out on the sly here:
http://downloads.crackflasher.com/?dir=Devs/Hashcode0f/motox


--------------------
CUSTOMIZED Moto x
wmaster
Message#3
03.11.13, 14:29
MIUI dev
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1344
Check in: 23.03.11
Xiaomi Redmi 5 Plus 3/32

Reputation:-  513  +

Official AOKP


--------------------
[2010]Nexusone[2011]Motorola defy[2012]Sony xperia play[2013]Pantech Vega Racer[2013]Huawei Ascend P1 LTE[2014]Moto Atrix HD & Moto G[2014]HTC Desire X[2015] LG L40(3)Moto G | Xperia Z1 & N5 & IdolX + RN3Pro| RN4
iPhone SE 10.2 JAILBROKEN
EMWD
Message#4
03.11.13, 16:44
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 647
Check in: 19.11.10
Motorola Moto X

Reputation:-  28  +

Those who want to hide the navbar (sulfur bar at the bottom of the screen) need:
  1. Download and installAttached filede.robv.android.xposed.installer_v21_77db90.apk(471.65 KB)
    ;
  2. Go to the xposed installer;
  3. Select "download";
  4. Click on the magnifier and drive in gravitybox;
  5. Click install (but do not start immediately after installation!);
  6. Exit to the level above Xposed Installer and tap on the "Modules", there put a checkbox in front of GravityBox;
  7. Exit Installer and reboot the device;
  8. Run the Gravity box as a normal application;
  9. Go to the "navigation bar settings".
  10. Set the checkbox "overwrite the default settings", "enable the navigation panel", slide the sliders "panel width", "Navigation panel height" for portrait and landscape (optional) orientation to zero;
  11. Exit and reboot the device;


For those who want to hide the name of the operator in the status bar, you need:
  1. Download google play motoxposed;
  2. Download and installAttached filede.robv.android.xposed.installer_v21_77db90.apk(471.65 KB)
    (if you have not put it before);
  3. Go to the xposed installerr and tap on the "Modules", there put a daw in front of motoxposed;
  4. Reboot the phone;
  5. Go to the xposed installer and make sure that the tick you set earlier is in place;
  6. Go to motoxposed, click Apply settings;
  7. Reboot device.


Post has been editedEMWD - 03.11.13, 20:34
kentodessa
Message#5
04.11.13, 01:27
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 649
Check in: 07.08.09
Samsung Galaxy S9 Plus Snapdragon

Reputation:-  78  +

http://forum.xda-developers.com/showthread.php?t=2444957
Judging by the list on the AT & T version, you can get a root, I understand it correctly?


--------------------
SamsungGalaxy S9 + (9600) + ASUS ZenBook UX302LG + MOTO 360 v2 46 mm
vivjen
Message#6
04.11.13, 02:07
Experienced
******
[offline]

Group: Banned
Messages 653
Check in: 13.01.09
Motorola Moto X

Reputation:-  33  +

expr0m,
It will not save?
Attached fileTutorial How To Protect and Restore for OTA Update - xda-developers.zip(387.88 KB)


--------------------
CUSTOMIZED Moto x
expr0m
Message#7
04.11.13, 02:17
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.03.12
Google pixel

Reputation:-  1  +

I solved the problem myself, and I will write as if someone suddenly needs it:
It turns out it is not enough to boot only boot and system.

c: \>moto-fastboot flash boot boot.img
sending 'boot' (10240 KB) ... OKAY [1.019s]
writing 'boot' ... OKAY [1.497s]

c: \>moto-fastboot flash motoboot motoboot.img
sending 'motoboot' (1588 KB) ... OKAY [0.295s]
writing 'motoboot' ... INFOflashing sbl3 ...
INFOflashing rpm ...
INFOflashing tz ...
INFOflashing aboot ...
INFOflashing sbl1 ...
INFOflashing sbl2 ...
OKAY [4.610s]

c: \>moto-fastboot flash recovery recovery.img
sending 'recovery' (10240 KB) ... OKAY [1.049s]
writing 'recovery' ... OKAY [1.148s]

c: \>moto-fastboot flash system system.img
sending 'system' (262144 KB) ... OKAY [22.574s]
writing 'system' ... OKAY [14.438s]
sending 'system' (262144 KB) ... OKAY [22.554s]
writing 'system' ... OKAY [14.672s]
sending 'system' (204320 KB) ... OKAY [17.660s]
writing 'system' ... OKAY [11.258s]

c: \>moto-fastboot -w
erasing 'userdata' ... OKAY [2.118s]
erasing 'cache' ... OKAY [0.831s]

c: \>moto-fastboot reboot
rebooting ...

c: \>

Posted on 11/04/2013 02:14:

Voila !!)
Attached Image

Attached Image


Posted on 11/04/2013 02:17:

Who would now teach how to use adb? to remove the warning picture when you turn on the phone
Goodnight.
I downloaded the firmware Rogers_XT1058_4.2.2-13.9.0Q2.X-116-LCX-26-34_CFC_1FF.xml
and through fastboot

moto-fastboot flash boot boot.img
\ ok
moto-fastboot flash system system.img
\ ok
moto-fastboot -w
\ ok
moto-fastboot reboot

The phone is loading, downloading updates over the air, but it gives an error during installation.
Update status
The software update failed

Maybe I'm doing something wrong? Tell me please
I tried again to install via fastboot
but there are no positive results.
Factory reset didn't help either.
Here's what it looks like.
[attachment = "3660140: Screensh ... 02-51-32.png"]


Post has been editedoxalis - 04.11.13, 12:35
sery
Message#8
05.11.13, 08:51
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 467
Check in: 23.11.06
Xiaomi Mi Note 3 4/64

Reputation:-  38  +

Root on Moto x with OTA installed: clap:
xda
vivjen
Message#9
05.11.13, 13:47
Experienced
******
[offline]

Group: Banned
Messages 653
Check in: 13.01.09
Motorola Moto X

Reputation:-  33  +

Audist @ 11/05/2013, 2:20 pm*
how to roll the Russian language


Yes, like nothing yet


--------------------
CUSTOMIZED Moto x
sery
Message#10
05.11.13, 17:39
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 467
Check in: 23.11.06
Xiaomi Mi Note 3 4/64

Reputation:-  38  +

Audist @ 11/05/2013, 1:20 PM*
how to roll the Russian language. The device is from the US AT & T xt1058. Thank.

Look at the header in the discussion thread. Everything is fine there. I did it myself.
mainbord
Message#11
05.11.13, 18:12
default
*********
[offline]

Group: FAQMakers
Messages 5377
Check in: 09.12.07
Motorola DROID Mini

Reputation:-  1136  +

Evgenst @ 11/05/2013, 15:47*
Tell me, if you unlocked the bootloader, how to remove the warning before turning on the device, that it is unlocked? Strain a little.

Motorola Moto X - Discussion (Post # 26324350)
Motorola Moto X - Discussion (Post # 26325269)

Post has been editedmainbord - 05.11.13, 18:13


--------------------
User Program Directory- improve?
Silence is the engine of progress.
The key to successful development of the topic is a good hat. Nobody is forgotten, nothing is forgotten - paragraph 5.1 of the rules
olegvp
Message#12
06.11.13, 00:33
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1449
Check in: 12.10.08

Reputation:-  111  +

You can probably completely Russify by installing a cyanogen firmware. Has anyone tried them already? My knowledge of English is not enough to understand how things are at the CDA.


--------------------
PDA2k, SE P900i, SE P910i, SE P1i, iPhone, Google ONE, iPhone 4, SGS II, iPhone 4S, SGS Nexus, SGS III, LG Prada 3.0, Galaxy Note, Sony Xperia S, HTC One X, iPhone 5, HTC One, ZTE Nubia Z5, Nokia Lumia 925, Lenovo K900, iPhone 5S, SX Z Ultra, Moto X, Droid mini, SG Note 3, iPad Air
expr0m
Message#13
06.11.13, 02:21
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.03.12
Google pixel

Reputation:-  1  +

http://forum.xda-developers.com/showthread.php?t=2445150
downloaded Android SDK - launched adb - enabled USB debugging
Checked the connection with the device:

c:>adb devices
List of devices attached
TA17608LZV device

there is a connection, now I do everything according to the instructions from the link

c:>adb shell su -c "dd if = / dev / block / platform / msm_sdcc.1 / by-name / clogo of = / sdcard / clogo.bmp

/ system / bin / sh: su: not found

And on the first command I fly: / system / bin / sh: su: not found
all subsequent ones are fine-tuned, but due to the fact that the first one does not pass, I cannot do anything.
Maybe someone knows what I'm doing wrong?

/ system / bin / sh: su: not found
does i need root?

I tried to get itroot
detailed videohere

at the first exploit:

Figure out the ip address of your phone:

Quote:
adb shell getprop dhcp.wlan0.ipaddress
unzip RockMyMoto- {version} .zip and push the exploit and su to / sdcard /:

Quote:
adb push su / sdcard /
adb push RockMyMoto.jar / sdcard /
Run Impactor and select "# start telnetd as system on port 2222", then hit start.

Once the process is complete, run telnet:

Quote:
telnet {your phone's ipaddress} 2222
Run the exploit through telnet

Quote:
dalvikvm -cp /sdcard/RockMyMoto.jar RockMyMoto
Adb to reboot:


got this here ....
Attached Image

I get a bunch of unanswered questions ... Maybe the firmware is not the one?
Rogers Firmware 13.9.0Q2.X-116LCX-36

Post has been editedcompressor10 - 06.11.13, 19:24
Grajn
Message#14
06.11.13, 10:47
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 63
Check in: 06.08.11
Motorola DROID Turbo

Reputation:-  2  +

expr0m,
Are drivers all ok?
try to boot into bp tuls

expr0m,
By the way, what did not make the root from the caphttp: //savagemessiahzine.com/pages/go/?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D2444957

Post has been editedcompressor10 - 06.11.13, 19:25


--------------------
Razr xt910>moto x>Droid turbo>Moto x pure 1275
expr0m
Message#15
06.11.13, 16:41
Visitor
**
[offline]

Group: Active users
Messages 21
Check in: 10.03.12
Google pixel

Reputation:-  1  +

Grajn @ 11/06/2013, 16:24*


c:>adb install -r PwnMyMoto-1.4.3-Rogers-IHateToolKits.apk
4614 KB / s (316579 bytes in 0.067s)
pkg: /data/local/tmp/PwnMyMoto-1.4.3-Rogers-IHateToolKits.apk
Failure [INSTALL_PARSE_FAILED_UNEXPECTED_EXCEPTION]

AnatolySam @ 11/06/2013, 16:42*
Please tell me ... Today I received a phone
Firmware - 4.2.2-13.9.0Q2.X-116-X-17-54
Is this the last? Is the camera corrected in it or is there something newer?
Thank you in advance


Phone of which operator?
About phone - System updates
I think you have the latest firmware version.
My phone operator is Rogers 13.9.0Q2.X-116LCX-36
M
Check outForum Rules!
4.19. Forbidden abuse of quoting (overquoting, overquoting). It is not necessary to quote fully opponent posts - just select the main points and press the button Picture


Post has been editedcompressor10 - 06.11.13, 19:25
epple
Message#16
06.11.13, 20:39
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 143
Check in: 01.12.08

Reputation:-  20  +

On the XDA, they posted a firmware leak for tmobaylovsky Moto X on KitKat 4.4. Put on phones with unlocked bootloader. Has anyone already set?
http://forum.xda-developers.com/showthread.php?t=2445955

Post has been editedepple - 06.11.13, 20:40
mainbord
Message#17
06.11.13, 20:44
default
*********
[offline]

Group: FAQMakers
Messages 5377
Check in: 09.12.07
Motorola DROID Mini

Reputation:-  1136  +

epple,
This is not for Moto Ex, this is the firmware for the new model of motorola, look at the screenshots. Since all new motorola made on the same board with the same iron, so the firmware fit from each other.


--------------------
User Program Directory- improve?
Silence is the engine of progress.
The key to successful development of the topic is a good hat. Nobody is forgotten, nothing is forgotten - paragraph 5.1 of the rules
vivjen
Message#18
07.11.13, 02:27
Experienced
******
[offline]

Group: Banned
Messages 653
Check in: 13.01.09
Motorola Moto X

Reputation:-  33  +

Epple @ 11/06/2013, 9:39 PM*
On the XDA, they posted a firmware leak for tmobaylovsky Moto X on KitKat 4.4. Put on phones with unlocked bootloader.

And put on the XT1058 after some manipulations and on CDMA Developer Edition from Verizon, and not just on T-Mobile

Post has been editedvivjen - 07.11.13, 03:09


--------------------
CUSTOMIZED Moto x
vivjen
Message#19
07.11.13, 02:38
Experienced
******
[offline]

Group: Banned
Messages 653
Check in: 13.01.09
Motorola Moto X

Reputation:-  33  +

expr0m @ 11/06/2013, 21:53*
Has anyone already got rid of the warning screen when the phone is turned on, and got root rights?
Describe how to do this.
I could not get


If you have an unlocked X you can root it doing the following.

1) install twrp recovery
a) fastboot flash recovery twrp263.img
2) reboot phone to recovery
3) install su
a) mount system in recovery
b) adb push su / system / xbin / su
c) adb shell chmod 4755 / system / xbin / su
4) reboot device 48Ryq

If you have unlocked Moto X, you can get a root like this:
1) install TWRP recowery
a) fastboot flash recovery twrp263.img
2) reboot in recovery mode
3) set su
a) mount system in recovery
b) adb push su / system / xbin / su
c) adb shell chmod 4755 / system / xbin / su
4) reboot

su here: www.teamblackhat.net/Downloads/su.zip
A source:https://plus.google.com/110773150384694258853/posts/6VickAorhttp://forum.xda-developers.com/showpost.p...p;postcount=123

Post has been editedvivjen - 07.11.13, 02:41


--------------------
CUSTOMIZED Moto x
sery
Message#20
08.11.13, 09:29
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 467
Check in: 23.11.06
Xiaomi Mi Note 3 4/64

Reputation:-  38  +

However, for AT & T, a 4.4 leak appeared
XDA
Azirus
Message#21
08.11.13, 19:01
Visitor
**
[offline]

Group: Banned
Messages 18
Check in: 08.11.13

Reputation:-  1  +

Audist @ 11/05/2013, 15:24*
and how to Russify at least partially?

Attached fileMoreLocale2.apk(254.44 KB)

1058 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/20/19 00:18