IconBIT NetTAB Mercury Quad - Discussion | Smartphone, 5.7 "



Rep: (449)
DiscussionIconBIT NetTAB Mercury Quad
PictureIconBIT NetTAB Mercury Quad, NT-3507M, Highscreen Alpha GTX
Description | Discussion �
  • Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  • To discuss and search for third-party programs / games, use the following sections: Programs and Games .
  • To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  • The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  • The results of performance tests of Android devices, see the topic: Benchmark
  • Before posting photos, read the topic Working with Images on the forum
  • Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
MiniFAQ
Specifications
Attached Image

  • GSM standard 900/1800/1900, 3G
  • Android 4.2 operating system
  • Body type classic
  • The number of SIM-cards 2
  • Weight 236 g
  • Dimensions (WxHxT) 82x161x10 mm
  • Screen type color IPS, touch
  • Type of touch screen multitouch, capacitive
  • Diagonal 5.7 inches.
  • Image size 720x1280
  • Number of pixels per inch (PPI) 258
  • Automatic screen rotation is
  • Camera 8 million pixels., Built-in flash
  • Camera features autofocus
  • Video recording is
  • The front camera is, 2 million pixels.
  • Audio MP3, FM Radio
  • Interfaces USB, Wi-Fi, Bluetooth
  • GPS satellite navigation
  • A-GPS system is
  • Internet access WAP, GPRS, EDGE, email POP / SMTP, HTML
  • 1200 MHz processor
  • The number of processor cores 4
  • 4 GB internal memory
  • RAM size 1 GB
  • Support for microSD memory cards (TransFlash), up to 32 GB
  • Battery type Li-Ion
  • Battery capacity 3000 mAh
  • Light sensors, proximity
  • Phone, headset, charger, protective film
Firmware
ATTENTION!All firmwares from a smartphone are applicable to this smartphone.Highscreen Alpha GTX
A selection of firmware and reviews on firmware
Firmware
Firmware from diman.wav
Joccers77 firmware
Firmware from simon1983
GK_Mod-L 3.2 with LP interface
MIX_W8510
iPhone 5s
Windows PhoneUI 8.1
Funtouch OS April 20, 2015
LeWa OS v.6 from 04/10/15. April 22, 2015 updated
COLOSSUS May 02, 2015
NTDC May 4, 2015
REDvolutions May 9, 2015
Fakimosha May 09, 2015
COLOR OS BY FAKIMOSHA May 10, 2015
Stock Deodexed ModdedL May 12, 2015
Deodexed rooted stock for firmware using custom recovery.
SHMOD L v2.1 with DOLBY May 18, 2015
Emui1.6 May 26, 2015
HOSP May 27, 2015
MIUI_RedRice29 May 27, 2015and heroverviewfromMarchik60
Kele OS May 28, 2015
PXZ2-4.3.5-LITE May 28, 2015
Lollipop May 29, 2015
YunOS_3.0 May 30, 2015
All-In-One June 01, 2015 with updated add-ons mods
RedRice31.0 June 05, 2015
Stock Acer Liquid June 05, 2015
xTouch June 6, 2015
NewLife June 6, 2015
Color_V2.0_Final June 06, 2015
MIUI_Simply June 08, 2015
HarmonyOS June 09, 2015
FreshROM June 10, 2015
LG G2 June 12, 2015
Lollipop S5 June 14, 2015
NextBurst June 15, 2015
HikeOS June 10, 2015
iOS7 June 12, 2015
XperiaZ3 June 12, 2015
PAP5044_Mod June 20, 2015
Explay X-Tremer Mod Port June 22, 2015
iNfinity HD June 25, 2015
MEDIA_MONSTER June 25, 2015

Emui 2.0 Mod release 06.26.2015
MiSoundROM release 06/28/2015
Philips release 06.28.2015
HTC ONE M8 release 07/02/2015
LeWaOS Mod release 07/02/2015
PAP5044 Mod version 2.0 release 07/20/2015
Yandex.Kit release 07.11.2015
CyanogenMod-10.1 release 07.21.2015
Narutofied release 07/21/2015
From unpublished
ColorOS by ATs v2.5s release 07.28.2015
MIUI v.6 release 07.29.2015
MERE v.2 release 08/14/2015
LEWA OS 5.1updatedated 08/14/2015
XiaoCaiOS release 09/02/2015
ColorOS by ATs v2.6srelease 09/17/2015
New YunOS 3.0release 10/27/2015
Xeniumrelease 10/30/2015
New Year release 11/05/2015
New Dawn release 11/07/2015
New Dawn v1.1Release 11/19/2015
NewDawn v.1.2release 08.12.2015
Starrealized 12/09/2015
Stock thl w20010.12.2015 release
Greenoid v.2.4.1Release 12/22/2015
NewDawn version 1.3Release 01/05/2016
MIUI 7Release 06.01.2016
LeWaOS v.6 SUPERLightRelease 01/07/2016
FuntouchOS 5.10.5 RuRelease 01/08/2016
MIUI (just MIUI)Release 01/09/2016
PAP5044 Mod v.3.0release 10.01.2016
Gk-lollilopRelease 01/14/2016
OMG-MIUIRelease 01/16/2016
XPERIA mod v3.2Release 01/28/2016
The NewDawn v.2Release 05.02.2016
MONSTERFATRelease 02/21/2016
Turbo romRelease 03/05/2016
Samsung GT-N900 Note IIIRelease 07.03.2016
The New Dawn 2.1Release 03/16/2016
XiaoCai OSRelease 03/17/2016
VIBEUI2.0 by-hollydenisrelease 03/18/2016
MILLENNIUMRelease 03/25/2016
Discoveryrelease 04/02/2016
GK-Lollipop-2.0release 04/07/2016
New LeWaOS v6.0release 04/15/2016
Lite Stock Graphic Mod 3.1 Dolby DigitalRelease 04/21/2016
XPERIA CRelease 04/20/2016
Philips W8510 EXCLUSIVERelease 04/22/2016
Ex-osRelease 04/25/2016
AOSPRelease 04/27/2016
MIUI-EXTASYrelease 05/01/2016
YunOS 3.0Release 05/02/2016
MIUI Standart 2Release 07/05/2016
Emui 2.1 Modrelease 07.06.2016
EmUI 2.0 Modrelease 06/17/2016
ShenduOSrelease 07.28.2016
Muse UI 3.0, release 08/15/2016

Firmware from sasha-vahtan
useful links
Polls archive
Poll â„–1 closed 05/13/2015 "How many are us, owners of IconBit NetTAB Mercury Quad smartphone?"
Attached Image
Where to buy spare parts?
http://taobao-0.com/Vu…QjrMfcrLa56e/item.html
http://partsoutlet.ru/item.php?id=31626
P.S. part number JHZ0057111 FP1
According to users, we are suitablebatteryCraftmann C1.02.422
How to make a post
EXAMPLE:
1) Firmware - MIUI v.5 Build03 30/8/14 from Sid.Yuriy
2) Recovery - unofficial CWM from the header
3) Problem- the phone does not work \ restarts \ no sound, etc ...
4) What preceded - dropped \ hit \ wet (including: rain \ snow) \ installed program \ application (name and from where: market or third-party resource)

Quick code to insert in the post:
[B] 1) [U] Firmware [/ U] [/ B] -
[B] 2) [U] Recovery [/ U] [/ B] -
[B] 3) [COLOR = red] [U] Problem [/ U] [/ COLOR] [/ B] -
[B] 4) [U] What preceded [/ U] [/ B] -

As well as an appeal to QMS to the authoritative, in your opinion, user. This method is suitable if the desired user.on-line.


Attached files

Attached fileuboot.zip(404.81 KB)


Post has been editedLexx808 - 15.01.20, 23:00
Reason for editing: Muse UI 3.0, release 08/15/2016



Rep: (1915)
Firmware upgradeNewdawn.beforeversion 1.2

Informationhere, hereandhere.

Download

Note: When installing this version, all user data will be deleted. Make backup.
Note 2: This archive - rum, without a password, and flash it.



Rep: (1915)
Ported firmware

STAR


Description and screenshotshere.
Download.

Note: Rum without password for firmware.

Firmware smart, everything seems to work. There was no possibility to test the connection.

Post has been editedSimon1983 - 07.06.16, 14:53



Rep: (1915)
Ported firmware

Stock thl w200


Description and screenshotshere.
Download.

Note: Rum without password for firmware.

Firmware smart, everything seems to work. There was no possibility to test the connection.

Post has been editedSimon1983 - 07.06.16, 14:51



Rep: (1915)
USMONOFF @ 10.12.2015, 21:45*
In the Eternityos Vibeui Light2 firmware, Google calendar does not work, departs with an error. "It is impossible to show your schedule, since the calendar storage is disabled. Turn on the storage in the settings." In among the applications there is no calendar storage.

Strange, I used this firmware for a long time. It was fine with a calendar, I constantly used for notes and reminders.
To start, enter the application settings. Delete the calendar application data and all the processes associated with the calendar. Carefully can be cleaned with the data of all Google processes, especially the framework.
Reboot into the recovery, make wipes Cache and Dalvik Cache.
Look, do you have files in the System / App folder
- Attached fileCalendarImporter.apk(95.38 KB)

- Attached fileCalendarProvider.apk(778.05 KB)

If there is no, then copy them there and set permissions 0644.



Rep: (1915)
Greenoid v.2.4.1

Attached Image

The firmware is ported at the request of our colleague.@ablin911

Firmware source and information about ithere.
Patch to ensure the work of the "Home" buttonAttached filePatch_Home_Key.zip.(551.61 KB)

Download firmware fromIndexDclaim
Firmware packaged in a password archivesavagemessiahzine.com

Post has been editedSimon1983 - 07.06.16, 14:48



Rep: (70)
I decided to spend the phone test inForeign mode

I looked at the box, the instruction is not written how much he should live in standby mode, I looked at the official website, also there is no information, in the end I found information in the left online stores, but it was different in each, so I will measure without an icon ...

During this time, the phone has been active 2 sims, the Wi-Fi fi has been turned on several times for the jump, the camera was used for a selection of several photos, and also worked alarm clock every day, the phone took SMS and was used for conversations, there were not many in the amount of about 30 minutes ..

In 2 weeks (14 days), the phone was a bit too much more than 50% of the battery And I was hoping that for more days at least it would be enough for it and will be 25 days, although Ideally would like 30 days at all!

A day ago, the phone was 40 with something percentage of the battery and waking up today, I just configured from what he saw .... The battery rolled 15% and all day the quietly melted ... And now, while I write it on the phone Somewhere 6% of the charge, I did not wait until he discharge, just became sad ...

Yes, it happens after flashing, or reboots, the battery sharply burns dofiga ... But the point is that I did not reflash and until that moment the phone was actively used and there was no such problem with a fall, it was with confidence that this would not happen, I started this test .... but it's not clear because of what happened such a failure ... And instead of the expected 25 days, I received only 15 ...

I'm sad... that's actually SCREENSHOT



Rep: (1915)
Firmware upgradeNewdawn.before1.3

Informationhere, hereandhere.

Download

Note: When installing this version, all user data will be deleted. Make backup.
Note 2: This archive - rum, without a password, and flash it.

Post has been editedSimon1983 - 05.01.16, 17:03



Rep: (1915)
MIUI 7
p o r t e d
Attached Image
Release 01/06/2016
Firmware info
Port with firmware for smartphone PAP5044.
Author @anatoli621
Firmware based on 4.2.1, as close as possible in appearance to MIUI7 (Lockscreen, icons, design (if possible) - is pulled out of the real MIUI7), T9 worker, root worker.
Real MIUI7 does not shine to us, trying to get a similar one.
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Minuses
Minuses have not yet been noticed. Particularly not tested.
Additions and user reviews
There are no additions and reviews yet.
Patches fonts
DownloadAttached fileUpdate + font + miui7.zip(25.47 MB)

Attached Image
Attached Image


DownloadAttached fileUpdate + 2 + font + miui7.zip(12.64 MB)

Attached Image
Attached Image


Rollback for fonts by default -Attached fileRe + Update + font + miui7.zip(26.39 MB)


Note: When installing any patch, be sure to make Nande backup.
Patches
1. Returned the Miui's native player (not to call a melody without it) -Attached fileUpdate + Music + miui7.zip(11.33 MB)

2. Dynamic statusbar -Attached fileUpdate + Statusbar + miui7.zip(17.74 MB)

3. Dynamic status bar (2 version) -Attached fileUpdate + Statusbar + 2 + miui7.zip(17.74 MB)

4. Roll back dynamic statusbar -Attached fileRE + UPDATE + STATUSBAR + MIUI7.ZIP(17.78 MB)


Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:46



Rep: (1915)
LeWaOS v.6 SUPERLight
p o r t e d
Attached Image
Release 07.01.2016
Firmware info
Port from the firmware for the PAP5044DUO smartphone.
Prestigio MultiPhone 5044 Duo - Firmware (post Hollydenis # 42815373)
Author @hollydenis
1. Russian strip in pim.apk + correct search on the "ABV" button
2. Edit Lewaantitheft (Antigorch) for Russian telephone numbers, Ukraine and Belarus
3. Translation of chinese inscriptions on the last tab Lewaplayer
4. Translation: In the gallery when selecting folders with pictures, the OK button has a Chinese inscription
5. Text color in the pop-up SMS is determined by the topic (instead of white)
6. Add "Engineering Menu" in the "For Developer" settings
7. Install video recording format in MP4 and JPEG quality in photo 100%
8. Name of the caller on the call screen in several lines
9. Photo of the caller on the whole
10. Changing the address of the jump file EPO.DAT (GPS)
11. Unlock hidden alarm settings
12. Minimum delay on closing applications button "Back" (as in MIUI)
13. Fix reboot for MTK6589 processors upon receipt of SMS "="
14. Fix Name of the sender in SMS: Instead of "n", the correct name is displayed.
15. Fix update SMS templates to Chinese
16. Remove the "beep" sound when adjusting the volume
17. Replacing PowerProfile for a more correct display of charge consumption
18. Remove the keyboard icon from the status bar
19. Changing the strange color of the text in toastframe
20. Open all bands for WiFi (provided hardware support for WiFi adapter)
21. Disable the contact list cache for smoothness
22. Increase Contact Avatar Size
23. Change the priority of LED notifications and batteries in some places
24. Charging indicator lights up green only at 100%
25. Remove the integrity check APK + Signature Check is always true.
26. Contacts in 2 lines in the list of contacts
27. Delete yellow pages in contacts, add groups
28. Adding a translation to the settings of the smart avatar (Chinese No - Cancel)
29. Displays the speed in the status bar (B / S, K / S, etc.) and traffic (B, KB, etc.) in Russian
30. The color of the text and background in applications is determined by the topic (for LewapackageInstaller, LewaUpdater, LewADeskclock)
31. Unlocked the "LED-Notifications Frequency" settings
32. Overlined the settings "Awakening of the volume button"
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Minuses
Minuses have not yet been noticed. There is no possibility to lend radio frequency.
Additions and user reviews
There are no additions and reviews yet.
Patches
Dynamic statusbarAttached fileDynamic_sb-lewaos6.zip.(4.24 MB)

Attached Image
Attached Image
Attached Image

Rollback of dynamic statusbarAttached fileSb-lewaos6.zip.(4.23 MB)

Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:45



Rep: (1915)
FunTouchOS.5.10.5Ru
p o r t e d
Attached Image
Release 08.01.2016
Firmware info
Port from the firmware for the PAP5044DUO smartphone.
Prestigio MultiPhone 5044 Duo - Firmware (post anatoli621 # 45434423)
Author @anatoli621
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Minuses
Error when entering the settings-additional settings for Russian locale, there is no such error in EN Local.
Additions and user reviews
There are no additions and reviews yet.
Patches
Voice control -Attached fileUpdate + Funtouchos + 5.10.5 + ru.zip(4.16 MB)

Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:41



Rep: (1915)
MIUI(just MIUI)
p o r t e d
Attached Image
RELEASE 01/09/2016
Firmware info
Port from the firmware for the PAP5044DUO smartphone.
Prestigio MultiPhone 5044 Duo - Firmware (post anatoli621 # 45792197)
Author @anatoli621
The author gathered this assembly 01.01.2016: "I continue experiments with MIUI"
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Patches
Installing paid topics from the application "Topics" -Attached fileUpdate + Theme + Miui.zip(5.47 MB)

Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:39



Rep: (1915)
PAP5044 Mod v.3.0
p o r t e d
Attached Image
Release 10.01.2016
Firmware info
Port with firmware for smartphone PAP5044.
Prestigio MultiPhone 5044 Duo - Firmware (post anatoli621 # 45971856)
Author @anatoli621
It is stock 1.0.47 with modified graphics, version 3.0.
All files from the stock firmware, Root is, etc. etc.
Super Sound Sony, Walkman player - Sound Liberty and Complete Walkman Worker. The native player is removed.
Changed firmware graphics.
Changed system animation.
OgBatteryMod in Russian.
Full contact of contacts in the contact list, in the call list.
By default, sorting by name (in your contacts, display incoming calls, etc.).
Removed signal when changing the volume with a rocker.
Photo quality 100%.
Automatic hiding network indicator not used by the SIM card.
Full date format in the curtain and on Lockskrin.
Installed widget hours and weather.
Photo with an incoming call to the whole screen.
Installed root.
Offline Sound input (SMS nadicking, for example), works without an Internet connection.
Changed the priority of the LED (when a call or SMS is received during charging - signals flashing green).
The LED when charging lights up green at 100%.
The camera removes video to MP4.
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Patches
1. Adds network name in WiFi tile and makes the web icons white -Attached fileUpdate + MOD_PAP5044_3.0.zip.(1.86 MB)
Attached Image

2. Rollback -Attached fileRE + UPDATE + MOD_PAP5044_3.0.zip(1.86 MB)

Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:37



Rep: (9)
Review of the firmware

Eternityos v.3.

Critical
When you turn on the function<Fast download>In the settings, the phone when turning on switches to the loop mode (the smartphone does not start the system).Solutions- Having a battery.

-Minuses-
  1. Few default options
  2. Some XPosed Framework modules are not supported.
  3. When leafing the list in some applications, the list hangs (for example in VKontakte)
  4. Does not displays the city with an incoming call


+ Pluses +.
  1. Many intelligence settings
  2. Excellent design that pleases the eye
  3. Root access is already seen
  4. Download Center
  5. Nova Launcher Prime is edited as a system launcher
  6. ViperFX will help customize the sound for your taste
  7. Extrigation-Flashlight
  8. Extrude compass
  9. Personalized root explorer
  10. Running Recovery mode straight from the off menu
  11. If you pull the battery, the date does not bet, only time (probably the system remembers the date)
  12. Charging is enough dirtless than when the stock firmware
  13. Related processor frequency and nutrition profiles
  14. Quick Access Toolbar
  15. Gesture management (works with a bang)
  16. Status bar changes color under the application (as in Lolipop)
  17. Now you can make a serial photo and on the front chamber
  18. Quick access to the settings through the status bar



Post has been editedEgoricon. - 10.01.16, 18:21



Rep: (21)
* Egoricon As for the item, it was not critical without once this, this function is included.



Rep: (1915)
Gk-lollilop
p o r t e d
Attached Image
Release 14.01.2016
Firmware info
Port from the firmware for the ZTE LEO S1 smartphone.
ZTE LEO S1 - Firmware (OS 4.2) (Post Kachalkingeorg # 46137847)
Author @KachalkinGeorg
Author's sitehttp://gk-mod.xyz/
Most of the design has been done
1. Minor changes in graphics
2. Right tiles (redirected stock switches on Lollipop style)
3. Replaced some applications from third-party manufacturers
4. A lot of work has been done and a lot of everything is redone - based on the mods of GK-Dream and GK-MOD_L
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Gapps
The firmware is collected without Gapps. If necessary, you can install these -Attached fileYourZgappsXS-4.2.2.zip(14.98 MB)

They were remarkably installed and everything was synchronized without problems.
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download



Rep: (1915)
OMG-MIUI
p o r t e d
Attached Image
Release 01.01.2016
Firmware info
Port with firmware for smartphone Prestigio MultiPhone Pap5044duo.
Prestigio MultiPhone 5044 Duo - Firmware (post Hollydenis # 46170802)
Author @hollydenis
From the author:
Well, I collected another firmware. The emphasis did on productivity, as well as the cost-effectiveness of nutrition and RAM, as a result there is a beautiful and functional firmware. It works stably and powerfully, even when you start a different software "Sitting" in the closing memory of applications, it is not observed, and the twisted starts quickly. Connected to the satellites in eight seconds. Google services are absent. In the firmware, a stunning sound, this is the BBK Audio and Sony AcidaudioEnGine symbiosis, running the Viperfx Superbass MOD, player in the Wallkman firmware, updated, as well as with the function of downloading and editing the missing covers, and the working visualizer.
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Delvik.
Gapps
There are no GAPPS in the firmware. If necessary, you can install these -Attached filemicrogapps.zip.(18.46 MB)
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:34



Rep: (99)
* MARCHIK60,
Join now.
She stitched this.
Attached Image

Any "dances with a tambourine" with settings inside the firmware, and do not correct the impossibility of installing applications in memory other than DATA ...
The security settings are extremely pleased, it is really clear how the applications are trying to climb into the whole "intimate" info, Skype and classmates are vital to be considered and others. Unique phone settings, and only on such firmware it can be limited in security settings ...
It's a shame for a good firmware ... On the old body with Android 4.0, it is 5 times more than applications, thanks to the installation of the installation on SD.
And the same Skype, racing the unsuccessful cashem to 200 MB ... In the same Data, lives the remnants of memory. And only demolition helps ... and it happens suddenly, the update of the tons of unnecessary video emoji ... Memory tends to zero and creepy brakes appear ...
Question.
In which stable firmware, the installation of applications on SD works normally? Or, create, not casually and passing, about patches for such firmware, which is treated with this problem, is preferably qualitatively, easily and delicious?



Rep: (1915)
XPERIA mod v3.2
p o r t e d
Attached Image
Release 01/28/2016
Firmware info
Port with firmware for smartphone DNS S4704.
DNS S4704 - Firmware (post tagil96rus # 46546427)
Author @vredniiy
Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Dalvik.
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Patches
After I have already been porting the firmware, it was found that in the Roma installation script there were no strings of installing applications from the DATA folder. Therefore, made the patch that sets these applications.
Download patchhttps://yadi.sk/d/5vmdfwlonsuqg.
Before the firmware Patch Wipes do not do! After installation, make Wipe Cache / Dalvik Cache.
Note: When installing any patch, be sure to make Nande backup.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Sincere thanks to the userGolden gold For the flooring on the firmware source.

Post has been editedSimon1983 - 07.06.16, 14:08



Rep: (27)
SIMON1983 @ 01/28/2016, 17:55*
XPERIA mod v3.2

>>>Themes for the firmware Vredniiy MOD V3<<<



Rep: (1915)
The NewDawn v.2
p o r t e d
Attached Image
RELEASE 05.02.2016
Firmware info
Port with firmware for smartphoneZTE Leo S1.
ZTE LEO S1 - Firmware (OS 4.2) (post alex.strannik # 46834715)
Author @Alex.Strannik
Fast, light, functional!
Many customizable features and additional applications optimized for ZTE LEO S1 (XHDPI screen)
Languages: Russian, English.
Clean, powerful, lamp sound! (Viper FX)
Saturated and clean colors
Busybox and supersu sews.

Installation
Everything you do with the phone, you do at your own risk, I am not responsible for the consequences of installing the firmware!
Install through custom recovery with all wipes. I recommend to make a backup of the installed firmware before installing.
IMPORTANT: Delete from the memory card ".Android Secure", ".estrongs", "Android" and the remains of the previous firmware
We go into the mod.rekavtery and perform the following actions:
1. wipe data / factory reset
2. wipe cache partition
3. Advanced / Wipe Dalvik Cache
4. MOUNTS AND STORAGE / FORMAT SYSTEM
5. Install Zip from SDCard / Chooze Zip From SDCard - Select Zip Firmware File (previously thrown on the SD card) on the memory card for installation and install the firmware.

Reboot.
The first download takes a long time.
Tuning Recommendations
After the first boot during the installation wizard, do not connect to Wi-Fi and do not enter the Google Account. Perform the first log in and reboot. If after the firmware system loads automatically, then with the first reboot, make Wipe Cache / Dalvik.
Minuses
Minuses have not yet been noticed.
Additions and user reviews
There are no additions and reviews yet.
Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Download


Post has been editedSimon1983 - 07.06.16, 14:06


Full version    

Help     rules

Now: 13.01.21, 16:48