NO.1 S6 - Discussion -savagemessiahzine.com

> savagemessiahzine.com >Android >Android - Devices >Archive section Android - Devices

156 pages
< 1 2 3 4 5 6 > »

NO.1 S6 - Discussion | Smartphone

27.10.13, 16:46 | #41
●
Moderators
Rep: (2745)

DiscussionNo.1 S6
No.1 S6
Description | Discussion пїЅ

Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
To discuss and search for third-party programs / games, use the following sections: Programs and Games .
To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
The results of performance tests of Android devices, see the topic: Benchmark
Before posting photos, read the topic Working with Images on the forum
Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Drivers for firmware

Instructions on firmware

For firmware, you need drivers,SP Flash Tooland the firmware itself.

Remove the battery from the phone;
Connect the phone to the computer;
Install the driver - a new device will appear in the device manager for 2 seconds - right-click on it, select "Update driver" and specify the folder with the driver (it is in the folder with the firmware), agree, wait for the installation to finish;
Disconnect the phone from the computer (pull out USB);
LaunchSP Flash Tool (with administrator rights on Win Vista, 7 and 8);
Push buttonScatter-loading and select the scatter file MT6589_Android_scatter_emmc.txt (lies with the firmware);
ATSP Flash Tool make sure included in options USB Mode , DA Download ALL and Force to high speed ;
Push buttonF9 or Download and accept the popup;
Without inserting the battery, connect the smartphone to the computer via USB, the firmware will start automatically;
At the end of the firmware, a green circle will appear, close it;
Disconnect USB, turn on the phone;
Boot after updating the system will automatically generate some configuration files, boot time will be a couple of minutes

Firmware

Official firmware

Firmware from 09/19/2013
Firmware from 10/09/2013
Firmware from 11/11/2013
Firmware dated 02/20/2014. There is a fixed CWM v.6.0.3.7 for this firmware, see Recovery section. Other CWM / TWRP Recovery will be displayed upside down, so everything that will be put through other recoveries will also be upside down.
Firmware from 02/28/2014. There is a fixed CWM v.6.0.3.7 for this firmware, see Recovery section. Other CWM / TWRP Recovery will be displayed upside down, so everything that will be put through other recoveries will also be upside down.

Custom firmware for recovery

MIUI 03.03.15

NO.1 S6 - Discussion (Post # 30249637)

MIUI 4.10.17

NO.1 S6 - Discussion (Post # 35336711)

ColorOs v2

NO.1 S6 - Discussion (Post # 30171484)

Fix to reduce power consumption and optimize the phone

NO.1 S6 - Discussion (Post # 30860612)

Fix inaccessibility YGPS in the engineering menu

NO.1 S6 - Discussion (Post # 30736841)

Modified setting.apk (Startup, ringtone selection, LED indication)

NO.1 S6 - Discussion (Post # 30736086)

Sort and display contacts by last name

No.1 N3 - Discussion (Post # 30247675)

xperia os

NO.1 S6 - Discussion (Post # 29776928)

ColorOS

NO.1 S6 - Discussion (Post # 29494811)

Updated_Revo_HD4-HK-HDBK-3DUI-13-01-2014 + fix_tega28_19.01.2014

update Tega.

HDC No.1 S6

NO.1 S6 - Discussion (Post # 33671834)

KITKAT No.1 S6

NO.1 S6 - Discussion (Post # 34712220)

Anonymous Droid 4.3

NO.1 S6 - Discussion (Post # 36569822)
According to the author, there is a real Android 4.3 inside, ported from the android port for ZTE. There are a lot of changes and corrections in the rum, left junk is put and some stock applications are thrown out.Only for No.1 S6 based on MTK6589T processor!

Recovery

Installation Instructions recovery

There are two options for installing Recovery - through SP Flash Tool on the computer and through the program Mobileuncle tools from the smartphone itself.

Via the SP Flash Tool from a computer

USB drivers must be installed, USB debugging enabled, downloadedSP FlashTool .

Unzip the archive with recovery to the folder withFlashtool ;
OpenSP FlashTool ;
Press the buttonScatter-loading and select the scatter file;
Make sure that the checkmark is only on the Recovery item, while the rest of the items may be red;
Double-click on the file name in the Recovery line and select the file with recovery unpacked in step 1;
Turn off the phone and remove the battery;
InFlashtool press a button Download or key F9 on keyboard;
Connect your phone via USB cable whenFlashtool recognizes the phone - a yellow progressbar crawls. Upon completion of the installation of recovery, a green circle will appear, it can be closed. Typically, the recovery installation process takes no more than 20 seconds;
Recovery is installed! To enter recovery, simultaneously press the volume + key and the power button.

Via Mobileuncle Tools from a smartphone

There must be root access, nothing can be done without it!

Unzip the archive with recovery;
Copy recovery.img to the root of the external SD card of the smartphone;
Disable WiFi or make sure that there are no connections, otherwise a lot of unnecessary files will load;
LaunchMobileuncle tools ;
Select a menu itemRecovery ( Recovery Update );
Select recovery.img;
Install the selected recovery;
Reboot
Recovery is installed! To enter recovery, simultaneously press the volume + key and the power button.

CWM v.6.0.3.7 based on files from 02.20.14 with a correct screen orientation
Link
CWM rua1 autoCWM v5.5.0.4 ;
Link
CWM CTR v2.2 Carliv Touch Recovery , based on CWM v6.0.4.4;
Link
CWM v6.0.3.0 English for Flash tool ;
Link
TWRP 2.5.0.0 ;
Link

Getting root rights

To installFramaroot ;
Run and choose Superuser or SuperSU, a choice, but better than SuperSU;
Choose any of the characters you like - Gimli, Sam, Frodo, Legolas, Aragorn, Gandalf, Boromir, if available (MediaTek choose Boromir exploit);
A window with a smiley popped up :-) about successfully obtained Root rights;
Reboot your smartphone and enjoy!
After receiving root rightsFramaroot can be deleted!

Russification

From janix1991 for firmware from 11.11.2013

This Russification is prepared specifically for official firmware from 11/11/2013, respectively, it fits better than others. Also in this version the translation and formulations are improved, there should no longer be any вЂњclumsinessвЂќ in the translation. You can download the link: NO.1 S6 - Discussion (Post # 31044586)

From tega28 for last year's firmware

Download archives
tega28_update_No.1.S6_.11.11.2013.zip(39.05 MB)
tega28_update_No.1.S6_.11.16.2013.zip(43.79 MB)
tega28_update_No.1.S6_.11.19.2013.zip(60.26 MB)
and copy them to a flash drive;
Reboot into recoveryCWM / TWRP ;
Chooseapply update from sdcard and specify the first (earliest by date) file, then install the second, then the third;
Choosewipe cache partition ;
Reboot

Increase available memory for applications

Combining internal memory

Run by applicationMeteos MTK6589 - there is a combination of internal memory with media, and the installation of 2700 mb for applications.
Attention! Actions can damage the phone!

Reboot to recovery;
Choosebackup and restore -> backup and wait for the end, while the flash drive should have enough free space for backup;
Reboot smartphone;
Install and runMeteos MTK6589 ;
To the root-rights request, answer - YES, provide;
Select the size of the data partition (it is recommended to set the size of the internal memory to 2.7GB);
In the program, select a reboot in recovery;
In the recovery, select the menu itemWipe data / factory reset ;
Upon completion, selectbackup and restore -> restore and wait for the end;
Reboot smartphone;
Boot into the system, and rejoice :-)

How to swap memory

You must have root rights!
Runs in any file manager with root support and access to system folders, for example,Total Commander for Android .

Go to the directory/ system / etc ;
Open filevold.fstab for editing;
Make adjustments as in the screenshot;
Reboot

Problem solving

Setting the proximity sensor

Run the stock programProximity ;
ChooseProximity calibration ;
Close the proximity sensor close or at a distance of 40cm;
At the end of the calibration, click OK.

GPS tuning

GPS setup on smartphones on MTK6589

Talk volume

You must have root rights!

Go to the engineering menu (done throughMobileuncle tools ( Engineering menu -> Engineering menu MTK ) either by dialing * # * # 3646633 # * # *);
Select tabHardware testing -> Audio ;
PressSpeech enhancement ;
PressCommon parameter and select from the list Normal mode ;
Click onParameter0 ;
We start editing the parameter - change the valueValue on 96 (for some, this value has already been registered, if you wish, you can reduce it so that the volume is even higher);
After editing, clickSet ;
Quit the program, call, check. Reboot as desired.

Solving problems with a magnet on custom firmware

Solving the screen lock problem with a case with a magnet for custom firmware (lewa, miui, coloros, etc.)

Camera flash boost

Read here

Set up the network and optimize battery consumption

An installed program is requiredMobileuncle tools .

LaunchMobileuncle tools ;
ChooseEngineering menu -> Engineering Menu (MTK) -> Telephony -> Bandmode ;
Select itemSim1 or Sim2 , depending on which map we want to change the parameters for;
Uncheck unnecessary frequencies (see screenshot) and clickSET at the very bottom of the list;
The optimal network settings are selected, theoretically this should further reduce battery consumption.

NVRAM Warning err 0x10 when searching for WiFi

You must have root rights! Runs in any file manager with root support and access to system folders, for example,Total Commander for Android .
There are two ways to fix it:

Put a patch through the recovery;
S5_Wi-fi macfix.zip(125.05 KB)
According to the instructions fromBobbyr
Instruction
1. Download file WIFI_NVRAM_Files.rar;
  WIFI_NVRAM_Files.rar(369 bytes)
2. Unpack 2 files into a smartphone on a card or insideWIFI and WIFI_CUSTOM ;
3. In the file manager go to the directory/ data / nvram / APCFG / APRDEB ;
4. Make backupWIFI and WIFI_CUSTOM ;
5. Move the files unpacked in step 2 to a directory/ data / nvram / APCFG / APRDEB ;
6. Reboot, turn on wifi and enjoy.

Modems

In case of unstable or poor connection, you can try to replace the modems throughrecovery . A full list of modems is available at post by janix1991

Embellishments

Install boot logo as in Samsung Galaxy S4

Availability is required SP Flash Tool . Attention!Perhaps displaying the wrong order of animation pictures when charging! So put at your own peril and risk.

Download the archive with the logo and unzip it to your desktop;
logo.zip(481.94 KB)
Or the correct logo.bin from janix1991NO.1 S6 - Discussion (Post # 33672086)
Turn off the smartphone and remove the battery from it;
LaunchSP Flash Tool (with administrator rights on Win. Vista, 7 and 8);
Push buttonScatter-loading and select the scatter file (if you unpacked the archive to the Desktop, then it lies along the path - Desktop \ logo \ MT6589T_Android_scatter_emmc.txt);
Look at the checkmarks should only stand on the sectionLOGO ;
Push buttonF9 or Download and accept the popup;
Connect the smartphone without battery to the computer via USB, the installation will start automatically (lasts 5-20 seconds);
After pouringLOGO a window with a green circle appears, close it;
Turn off the smartphone, insert the battery, turn on the smartphone and rejoice.

Screenshots

Install boot animation as in Samsung Galaxy S4

You must have root rights!
Runs in any file manager with root support and access to system folders, for example,Total Commander for Android .

Download archive with boot animation, shutdown animation and sounds;
Samsung Galaxy S4 Bootanimation.rar(12.63 MB)
Copy the contents of the archive to a flash drive;
Go to the directory/ system / media ;
Make a backup of the files there;
Copy from flash drivebootanimation.zip , shutanimation.zip , bootaudio.mp3 , shutaudio.mp3 to folder / system / media ;
Set permissions for each file644 ( long tap on file -> Properties -> rwx -> 644 );
Reboot and enjoy;

Poll results

Change history

30.10.2014 - Added a new custom firmware MIUI 4.10.17 from yorma & tega28
06.10.2014 - Added a new custom firmware KITKAT No.1 S6 from janix1991
21.08.2014 - Added a new custom firmware HDC No.1 S6 from janix1991 , the correct Galaxy S4 logo.bin, also created by janix1991
19.05.2014 - Links to last year's firmware died, updated and introduced a history of changes to the topic.
25.04.2014 - Added a link to a working CWM for February firmware without a flipped screen.

Submitted material is unofficial! In case of unsuccessful firmware or destruction of the device, the author of the software and the Administration of the resource of responsibility are not responsible!
All actions are performed at your own risk!
The battery from the original fits, it is important to put it with the back cover from the original, because the glass of the screen will peel off. Fullhd version does not exist!

Post has been editediMiKED - 04.02.15, 07:59

Reason for editing: Painted firmware in colors to facilitate the search

05.11.13, 19:47 | #42
●
Friendssavagemessiahzine.com
Rep: (13)

dolbo, a link to the CRA? I want to tell you, too, written in 2600, but in fact there is less in 2 times?

05.11.13, 20:54 | #43
●
Active users
Rep: (4)

Arniks @ 05.11.2013, 22:47

dolbo, reference is made to the CRA? I want to tell you, too, written in 2600, but in fact there is less in 2 times?

Exactly! Battery native awful!http://www.ebay.com/itm/ZeroLemon-2x-Samsu...=item43c1663d1e
This zero. MPJ something yet merchants to send to Russia, but I think we can agree! Before you can buy 500-700 per mpj 3500 c delivery! In general googly. And even zerolemon sell on Amazon, and then try not to shove guano, such as more or less proven product should be.

Here MPJhttp://www.ebay.com/itm/MPJ-2x3500mAh-Batt...3351e7#shpCntId
Only need to discuss the delivery.

Post has been editeddolbo - 05.11.13, 20:56

06.11.13, 04:55 | #44
●
Active users
Rep: (4)

Arniks @ 05.11.2013, 22:47

dolbo, reference is made to the CRA?

Found! mpjbattery.com there even Russian is!

06.11.13, 08:00 | #45
●
Friendssavagemessiahzine.com
Rep: (179)

dolbo @ 05.11.2013, 21:54

Here MPJhttp://www.ebay.com/itm/MPJ-2x3500mAh-Batt...3351e7#shpCntId
Only need to discuss the delivery.

and whether it fits in our phone? they can be and thicker than the original. then it is necessary for them to take the back cover.

06.11.13, 11:28 | #46
●
Honorary Gameday
Rep: (449)

The theme is integrated withNo.1 S6 - Discussion
Messages moved to this topic.

[Size = 1] [color = transparent]

[/ color] [/ size]

Post has been editedassasa - 06.11.13, 11:30

06.11.13, 20:37 | #47
●
Friendssavagemessiahzine.com
Rep: (179)

dolbo @ 04.11.2013, 00:47

I asked spread. Firmware original sink from 09/10/13.

set, sound disappeared and unlocking effect.
left some Chinese .... JRGAmeCenter application.

06.11.13, 20:41 | #48
●
Friendssavagemessiahzine.com
Rep: (34)

deman05,
sound and the effect it makes cocoa is the standard program ..

06.11.13, 21:21 | #49
●
Friendssavagemessiahzine.com
Rep: (13)

CWM RECOVERY can also be set via Mobileuncle Tools, set yesterday and preproshilsya through rekaveri. Jamb with charging stayed.

06.11.13, 22:34 | #50
●
Friendssavagemessiahzine.com
Rep: (37)

deman05 @ 06.11.2013, 19:37

set, sound disappeared and unlocking effect.
left some Chinese .... JRGAmeCenter application.

For sound and unlock animation meets Chinese market.
Attached file

android_market_v922.apk(1.76 MB)

06.11.13, 23:12 | #51
●
Friendssavagemessiahzine.com
Rep: (13)

guys, somebody can mod firmware MIUI V5 add Russian language? there is only England and China. or whether it is possible to add anything to it ???

07.11.13, 05:36 | #52
●
Active users
Rep: (4)

deman05 @ 06.11.2013, 23:37

Quote (dolbo @ 04.11.2013, 00:47)
I asked spread. Firmware original sink from 09/10/13.
set, sound disappeared and unlocking effect.
left some Chinese .... JRGAmeCenter application.

"For some Chinese application" is just responsible for the sound and effects UNLOCK! It left no accident!
Lost all that stuff because you're his demolished! Carefully read the description of the firmware!

Posted 07/11/2013, 5:32:

dolbo @ 03.11.2013, 14:45

Changes: Russian set the default language, removed a few Chinese programs (including SMSREG), other than that of the sound effects and screen lock is responsible, it is simply hidden.

Posted 07/11/2013, 5:36:

I made this program hidden, so it does not hang out in the menu, I also strain the characters in the programs! We go to the office. menu, desktop, and then the hardware menu button (which is on the bottom left), select "hide applications," well then "show hidden applications."

07.11.13, 08:47 | #53
●
Friendssavagemessiahzine.com
Rep: (179)

qmax89,
dolbo,
Thank. Yesterday at random to deal with this.

07.11.13, 11:44 | #54
●
Active users
Rep: (2)

dolbo @ 05.11.2013, 19:17

Therefore, all I recommend to this unit and ordered the original battery cover (good fit as a family)

Read on one forum, the truth about HDC S4 I9500,
that the original battery it does not arise with any cover, even with the original, or rather the cover is not closed.

I quote

so I tried ..kryshki odinakovy..noshu and cases on the original tot.chto came with shds..a lid can not be closed because the battery on the original thicker than FAS

This is all due to the fact that the HDC S4 I9500 another depth?
But then, the cover must be other forms of logic, a "close", otherwise where will the extra volume in the original.
Or quoted character just is not very truthfully say?
Someone confirms that this no1 S6 gets original on battery? Or just speculation?

Post has been editedKoba400 - 07.11.13, 18:34

07.11.13, 15:11 | #55
●
Friendssavagemessiahzine.com
Rep: (37)

luckybeggar2 @ 07.11.2013, 10:44

Someone confirms that this no1 S6 gets original on battery? Or just speculation?

The battery of the original kind of fit, but pushes the glass: huh: Although it is logical if you think about it, and with a cover of the original to be squeezed. I should cover the original S4 but the battery native S6, as a native of the village cover: huh:

Post has been editedqmax89 - 07.11.13, 15:15

07.11.13, 15:43 | #56
●
Active users
Rep: (4)

luckybeggar2 @ 07.11.2013, 14:44

Once received your device, invited me to visit a friend, the owner of the original SGS4, once a threshold of his staff to understand! Put the cover and the battery to him and to our original battery and cover! Everything is perfect rose! I was pleasantly surprised. Half day so drove! It is a pity that antutu time battery test was not done! FITS ALL!

Post has been editeddolbo - 07.11.13, 15:45

07.11.13, 17:37 | #57
●
Friendssavagemessiahzine.com
Rep: (13)

Who knows whether through CWM native firmware to deliver?

08.11.13, 08:35 | #58
●
Users
Rep: (0)

At the latest firmware problem with Wi-Fi. Periodically appears and falls off, the indicator shows that Wi-Fi enabled.
What could it be?

08.11.13, 11:32 | #59
●
Friendssavagemessiahzine.com
Rep: (179)

ruslan.chorney,
this is a problem in poor antenna / receiver / driver,

P.S. By the way in the latest firmware to keep the battery has become better compared to 2013.09.19. night = 8-9%, the game 3 hours = 30-35%

08.11.13, 16:03 | #60
●
Users
Rep: (0)

I hope that the matter in the driver.

08.11.13, 16:07 | #61
●
Friendssavagemessiahzine.com
Rep: (37)

Someone put firmware Liors1-No.1 S6- v2.0.5? Ka is she? : Sveta:

ruslan.chorney @ 08.11.2013, 15:03

I hope that the matter in the driver.

I have a tablet was on, it was because of the wi-fi stood 802.11b + g + n modem mode in the settings changed in the 802.11b + g and the problem disappeared.

Post has been editedqmax89 - 08.11.13, 16:12

156 pages
< 1 2 3 4 5 6 > »

Full version

Help rules

Time is now: 19/05/20 14:00

©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com^®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement

Forum IP.Board © 2020 IPS, Inc .

ads