[X]Assistant

[Alex --- Sh]

Linux for miniPC RK3188 Mali400mp4:study, experience, communication : happy:;)

References:

Git projects and repositories

https://github.com/phjanderson
linux-rockchip / rockchip-3.0
linux-rockchip / mali-modules
yakir-yang / libvdpau-rockchip
android git repositories
olegk0 / rk3x_kernel_3.0.36
olegk0 / rk3188-kernel
Git repositories by Jan Morrison
A lot of things from Radxa

Articles and instructions

https://plus.google.com/1094511780066838659...sts/765xvHJGWm6
https://plus.google.com/1094511780066838659...sts/Edr7cbWFit4
http://www.rikomagic.co.uk/forum/viewtopic...f=13&t=5135
Linaro 13.11 (Lubuntu) for Realtek Chip, update with a working GPU
Instructions from radxa
Debian / Ubuntu on RK3188
Picuntu on rk3188
Webserver on RK3188
Collection LINUXIUM

Functional diagram of the processor rk3188

Putting the core

http://nixtalk.com/kernel-rk3188
http://radxa.com/Rock/Booting_Linux

How to put the system on an SD card

All experimental operations are risky and only at your own risk! Do not forget to back up your systems!

Option 1

The original .img file (tried ubuntu 12.04 under Realtek, but so far I could not start WiFi, but it works through the copper network: happy :)https: //docs.google.co…67S1hQQ2VybldVYU0/edit
We take a card of at least 4 GB (you can also flash drive)
In Windows
Format the card in the primary ext4 prog "MiniTool Partition Wizard Home Edition"
In linux
Give the name of the map
e2label / dev / sd1 linuxroot (can also be sdc, check cat / proc / partitions)
(You can also format the card in Linux)
Create a mount directory
mkdir / mnt / linuxroot
Mount the map to this directory
mount / dev / sd1 / mnt / linuxroot (may also be sdc, check cat / proc / partitions) (a flash drive will also have something else)
In / tmp, copy the .img file. (From the previously downloaded archive at the above link - linuxium-mali-ubuntu1204-desktop-rfs.img.7z, extract the .img file and, for convenience, rename it to rfs.img)
In / mnt create a folder misc
cd / mnt
mkdir misc
cd / tmp
Mount the system from the .img file to / mnt / misc
mount -o loop rfs.img / mnt / misc
Next, transfer the system
cd / mnt / misc
for i in *<enter>
do<enter>
echo copying $ i<enter>
cp -a $ i / mnt / linuxroot<enter>
echo copied<enter>
done<enter>

We are waiting ... with!

umount / mnt / linuxroot

Next, for example, using the dual-boot from radxa and Janhttps: //docs.google.co…67bFZucW9NT0hocVE/edit(put this: RKBatchTool.exe), you can use both android and Linux from the card or transfer Linux to NAND or back.

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ. пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ. download

: happy:;)

Option 2(from userdarder)

In ubunt:
sudo apt-get install unetbootin
sudo unetbootin
Select the image, media, space used to save files after a reboot (apparently swap) and OK.
---
You can also use the mintstick utility:
sudo apt-get install mintstick
sudo mintstick

>comments and suggestions: happy:;)

By hw-video acceleration
Linux for ARM

Universal Loader by Jan Morrison(looking for systems on SD card and in NAND)

Bootloader and Linux directly on the SD card(The img image is placed on the Win32 Disk Imager's SD card):
The first universal assembly for RK3188 from Odessa(for the test, allows you to determine the Wi-Fi module, check the sound and video)
Build Ubuntu 12.04 for AP6210 with customization from Alex(your humble servant, Alexander Sergeevich)
and furtherby Jan Morrison

New!
Long-awaited instructions for building the kernelfromsyph3r ! We try!
And: Optionfromsyph3rsameon introducing a new kernel into the boot area of ​​the SD card. We try the same! Unsubscribe!

UniversalBoot loader

Forums

www.freaktab.com. Linux for RK3188 based TV boxes
www.freaktab.com. Ubuntu, Lubuntu or Xubuntu on the MK802IV
www.freaktab.com. PicUntu-4.5-nand-BasicGUI (LinkV @ lery)

Videos

Client Solution
Android / Linux dual boot on Rockchip RK3188
Mali on Linux for Radxa Rock (RK3188)

Experience and useful from the participants of the topic

olegk0. about hw video acceleration
Test video
"direct massage" from scaling
OptionLinux + Androidfor AP6210
Ganper316. Images from SD cards based on Ubuntu 14.04, Russified
moldon. WiFi treatment for different chips
CityAceE. New! Ubuntu 14.04 image with LXDE desktop (under Windows7), with a bootloader from an SD card and a set of cores for different WiFi chips; mirror on yandex.
zhecka, recent developments:1 2 3
zhecka, brief "kitchen" by sections
zhecka, Kodi integration

***
There is support for hardware video acceleration!

Post has been editedAlex --- Sh - 09.02.17, 17:37

Reason for editing: added a link from zhecka last year

[Alex --- Sh]

[email protected], 19:03

to Army_

Happily!!! : lol:;)

[lvm1976]

Good luck

[Alex --- Sh]

I want to warn those who are going to shop on AliExcess:
Be careful, there are a lot of scam!
For the year I made 3 orders for 50 bucks of different goods from different sellers. And all three times got to divorce! After the payment is sold, they require additional payments, allegedly the price has changed or the young employee has missed and accidentally understated the price. Moreover, they are asked to make a surcharge on a special website (where air is as a commodity)!
Ali was not a trading platform, but a bazaar! Read reviews on the forum:http://community.aliexpress.com/forums/60-...%BB%D0%BE%D0%B3
I got it on ebee too, but the little things and the problem was quickly solved. They try to keep discipline there. : beee:;)

[V @ lery]

I installed the assembly on mk809III from herehttp://ubuntu.g8.net/index.php/14-sample-d...5-nand-released
It was done normally.
wifi does not starthttp://www.aliexpress.com/snapshot/238482708.html(usb-hub works) and usb-BT.

I ask for the help of those who know. !! :)
with a terminal sign .. English with a translator.

how to get wifi
USB LAN is a driver
list of files:

.qf9700.ko
.qf9700.mod.o
.qf9700.o
Makefile
Module.markers
Module.symvers
modules.order
qf9700.c
qf9700.h
qf9700.ko
qf9700.mod.c
qf9700.mod.o
qf9700.0
readmi in chinese

Mali driver appeared? how to fasten?

: rolleyes:

[V @ lery]

about scammers on AliExpess .....

I have been buying on AliExpess for a year already .. I choose sellers with a rating not lower than 96 and the number of sales is not less than 200 .. there are still no problems ..
who are scared looking for sellers who have 98 positive and sales for 1000 and there will be happiness ...
the longest delivery is 61 days ... well, this is mail and customs ..



P.S.
On ebey.com, one parcel of 11 did not arrive ... and sometimes numbers are not issued ...

Sorry for oftop ...
;)

Post has been editedV @ lery - 20.11.13, 21:25

[Alex --- Sh]

V @ lery @ 11/20/2013, 11:11

how to get wifi

Here is:http://rus-linux.net/nlib.php?name=/MyLDP/...x-desktope.html
And, in general, it is necessary to open the whistle and see which WiFi chip. If RTL8188EUS, then
file from this archive8188eu.ko.zip(283.58 KB)

we throw in / lib / modules /
and
sudo insmod /lib/modules/8188eu.ko

-----------
C Ali, I no longer contact: lol:

[V @ lery]

ifconfig -a - wlan0 - no

opened -chip 8188.
here / lib / modules / this module is 8188eu.ko

in the terminal I typed sudo insmod /lib/modules/8188eu.ko

error count not insert module /lib/modules/8188eu.ko: Unkown symbol in module

Replaced with your module .. it is slightly larger in size .. the error is the same.

tried to launch usb-lau
IP does not assign an IP machine (although everything works on the computer) I wrote it in / etc / network / interfaces

iface eth0 inet static
address 192.168.1.98
netmask 255.255.255.0
gateway 192.168.1.1
auto eth0

ping to the router is, on ya.ru not ..?

ping sometimes disappears and ssh falls off ... generally not very stable.

Post has been editedV @ lery - 21.11.13, 17:25

[Alex --- Sh]

I also tried to put PicUntu at first, and it was on the whistle with the 8188 chip. This error was also there, but I bypassed it as it were, but I can’t remember: rolleyes:
But besides this there are still a lot of problems.
I chose Jan Morison's linuxium.Linux for miniPC RK3188 (Post # 26402715)
For the 8188 chip, here is the core:linuxium-1080-8188-mk802iv-nand-kernel.zip(2.46 MB)

[V @ lery]

thankAlex --- Sh
It turns out that there are more letters that are on the chip after the numbers, I have rtl8188etv, therefore, your kernel did not start (I tried four distributions).
came across the universal rtl8188etv (eu) earned. : D
link

http://www.freaktab.com/showthread.php?7414-PicUntu-4-5-nand-BasicGUI-installer-One-file-few-click-install&p=103351&viewfull=1#post103351

or herekernel.img.zip(4.58 MB)


Now you need to fasten the Russian locale and flash player: rolleyes:

[Alex --- Sh]

Russification from under the root
and flash here:Linux for miniPC RK3188 (Post # 26455664)I could not do otherwise

[brbr]

Whether prompt the logic of reasonings is true:
there is UG007B, the board in appearance is very similar to mk802iv,
but with no firmware for the latter, WiFi can not be revived (8188eu)
because the module is sitting on the USB, then the reason should be looked for in that it is connected to another USB (not initialized) port
and to start you have to dig in the direction of launching USB or physically solder the module

[ 3.806477] =======================================================
[3.810540] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 3.814861] =======================================================
[3.818861] RKWIFI WiFi driver (Powered by Rockchip, Ver 4.53.WFD) init.
[3.823275] =========== WLAN placed in POWER ON ========
[3.827695] ANDROID-ERROR) wifi_set_power = 1
[3.832079] rk29sdk_wifi_power: 1
[3.881742] usb 2-1.2: new high speed USB device number 3 using usb20_host
[3.982497] usb 2-1.2: New USB device found, idVendor = 0bda, idProduct = 8179
[3.986509] usb 2-1.2: New USB device strings: Mfr = 1, Product = 2, SerialNumber = 3
[3.990955] usb 2-1.2: Product: 802.11n NIC
[3.995219] usb 2-1.2: Manufacturer: Realtek
[3.999557] usb 2-1.2: SerialNumber: 0092C50AD949
[4.081742] usb 2-1.3: new high speed USB device number 4 using usb20_host
[4.086440] wifi turn on power
[4.090908] ANDROID-ERROR) wifi_set_carddetect = 1
[4.095212] rk29sdk_wifi_set_carddetect: 1
[4.099592] mmc1: slot status change detected (0-1)
[4.104058] rk29_sdmmc_change_clk_div..1935 .. newDiv = 42, newCLK = 294Khz [sdio]
[4.182248] usb 2-1.3: New USB device found, idVendor = 1a40, idProduct = 0101
[4.186329] usb 2-1.3: New USB device strings: Mfr = 0, Product = 1, SerialNumber = 0
[4.190877] usb 2-1.3: Product: USB 2.0 Hub
[4.195555] hub 2-1.3: 1.0: USB hub found
[4.199997] hub 2-1.3: 1.0: 4 ports detected
[ 4.301760]
[4.301763] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[4.346945] rk29_sdmmc_command_complete..2906 ... CMD5 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.351455] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.356419] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.361324] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.366187] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.370952] rk29_sdmmc_command_complete..2906 ... CMD1 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[4.481740] usb 2-1.3.1: new high speed USB device number 5 using usb20_host
[4.584136] usb 2-1.3.1: New USB device found, idVendor = 1415, idProduct = 2000
[4.588255] usb 2-1.3.1: New USB device strings: Mfr = 1, Product = 2, SerialNumber = 0
[4.592700] usb 2-1.3.1: Product: USB Camera-B4.09.24.1
[4.596997] usb 2-1.3.1: Manufacturer: OmniVision Technologies, Inc.
[4.681741] usb 2-1.3.2: new low speed USB device number 6 using usb20_host
[4.787406] usb 2-1.3.2: New USB device found, idVendor = 1d57, idProduct = 32da
[4.791677] usb 2-1.3.2: New USB device strings: Mfr = 0, Product = 2, SerialNumber = 0
[4.796276] usb 2-1.3.2: Product: 2.4G Receiver
[4.804470] input: 2.4G Receiver as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/input/input1
[4.809370] generic-usb 0003: 1D57: 32DA.0001: input, hidraw0: USB HID v1.10 Keyboard [2.4G Receiver] on usb-usb20_host-1.3.2 / input0
[4.816570] input: 2.4G Receiver as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.1/input/in2
[4.821627] generic-usb 0003: 1D57: 32DA.0002: input, hidraw1: USB HID v1.10 Mouse [2.4G Receiver] on usb-usb20_host-1.3.2 / input1
[4.831507] input: 2.4G Receiver as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.2/input/in3
[4.836626] generic-usb 0003: 1D57: 32DA.0003: input, hidraw2: USB HID v1.10 Device [2.4G Receiver] on usb-usb20_host-1.3.2 / input2
[ 6.101721]
[6.101724] failed to power up wifi chip, retry again (4 left) **
[ 6.101731]
[6.111326] ANDROID-ERROR) ## wifi_remove
[6.116338] ANDROID-ERROR) wifi_set_power = 0
[6.121360] rk29sdk_wifi_power: 0
[6.326493] wifi shut off power
[6.331186] ANDROID-ERROR) wifi_set_carddetect = 0
[6.336134] rk29sdk_wifi_set_carddetect: 0
[6.341083] mmc1: slot status change (1-0)
[ 6.345745]
[6.345749] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[6.345772] =========== WLAN placed in POWER OFF ========
[6.345821] =========== WLAN placed in POWER ON ========
[6.345884] ANDROID-ERROR) wifi_set_power = 1
[6.345899] rk29sdk_wifi_power: 1
[6.596015] wifi turn on power
[6.599977] ANDROID-ERROR) wifi_set_carddetect = 1
[6.604354] rk29sdk_wifi_set_carddetect: 1
[6.608449] mmc1: slot status change detected (0-1)
[ 6.811708]
[6.811711] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[6.856955] rk29_sdmmc_command_complete..2906 ... CMD5 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[6.861509] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[6.866403] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[6.871191] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[6.875980] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[6.880722] rk29_sdmmc_command_complete..2906 ... CMD1 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[ 8.611714]
[8.611717] failed to power up wifi chip, retry again (3 left) **
[ 8.611724]
[8.623797] ANDROID-ERROR) ## wifi_remove
[8.627852] ANDROID-ERROR) wifi_set_power = 0
[8.632127] rk29sdk_wifi_power: 0
[8.836243] wifi shut off power
[8.840109] ANDROID-ERROR) wifi_set_carddetect = 0
[8.844320] rk29sdk_wifi_set_carddetect: 0
[8.848512] mmc1: slot status change detected (1-0)
[ 8.852478]
[8.852482] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[8.852502] =========== WLAN placed in POWER OFF ========
[8.852538] =========== WLAN placed in POWER ON ========
[8.852582] ANDROID-ERROR) wifi_set_power = 1
[8.852596] rk29sdk_wifi_power: 1
[9.102711] wifi turn on power
[9.106508] ANDROID-ERROR) wifi_set_carddetect = 1
[9.110646] rk29sdk_wifi_set_carddetect: 1
[9.114527] mmc1: slot status change detected (0-1)
[ 9.311707]
[9.311709] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[9.356931] rk29_sdmmc_command_complete..2906 ... CMD5 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[9.361404] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[9.366149] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[9.370338] DWC_OTG: frame_number 0x38a2, start 0x387f, complete: 1
[9.370459] DWC_OTG: frame_number 0x38a2, start 0x387f, complete: 1
[9.375107] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[9.383757] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[9.388420] rk29_sdmmc_command_complete..2906 ... CMD1 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[ 11.111713]
[11.111716] failed to power up wifi chip, retry again (2 left) **
[ 11.111723]
[11.123650] ANDROID-ERROR) ## wifi_remove
[11.127596] ANDROID-ERROR) wifi_set_power = 0
[11.131619] rk29sdk_wifi_power: 0
[11.335473] wifi shut off power
[11.338999] ANDROID-ERROR) wifi_set_carddetect = 0
[11.342805] rk29sdk_wifi_set_carddetect: 0
[11.346475] mmc1: slot status change detected (1-0)
[ 11.349951]
[11.349954] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[11.349971] =========== WLAN placed in POWER OFF ========
[11.350003] =========== WLAN placed in POWER ON ========
[11.350041] ANDROID-ERROR) wifi_set_power = 1
[11.350054] rk29sdk_wifi_power: 1
[11.600163] wifi turn on power
[11.603524] ANDROID-ERROR) wifi_set_carddetect = 1
[11.607146] rk29sdk_wifi_set_carddetect: 1
[11.610614] mmc1: slot status change detected (0-1)
[ 11.811706]
[11.811709] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[11.856938] rk29_sdmmc_command_complete..2906 ... CMD5 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[11.860902] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[11.865151] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[11.869288] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[11.873490] rk29_sdmmc_command_complete..2906 ... CMD55 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[11.877682] rk29_sdmmc_command_complete..2906 ... CMD1 (arg = 0x0), hoststate = 1, errorTimes = 1, errorStep = 0x1e! [sdio]
[ 13.611712]
[13.611715] failed to power up wifi chip, retry again (1 left) **
[ 13.611723]
[13.622184] ANDROID-ERROR) ## wifi_remove
[13.625689] ANDROID-ERROR) wifi_set_power = 0
[13.629317] rk29sdk_wifi_power: 0
[13.832970] wifi shut off power
[13.836345] ANDROID-ERROR) wifi_set_carddetect = 0
[13.840016] rk29sdk_wifi_set_carddetect: 0
[13.843584] mmc1: slot status change detected (1-0)
[ 13.847181]
[13.847184] drivers / mmc / core / core.c ... 1824 .. ===== mmc_rescan Begin .... [mmc1]
[13.847199] =========== WLAN placed in POWER OFF ========
[ 13.847211]
[13.847218] failed to power up wifi chip, max retry reached, exits **
[ 13.847231]

[brbr]

Alex --- Sh
Can you lay out dmesg from a successful download from 8188eu?

==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 207.997644] =======================================================
[207.997666] Realtek 8188EU USB WiFi driver (Powered by Rockchip, Ver 3.31.WFD) init.
[207.997705] wifi_activate_usb
[207.997722] rk29sdk_wifi_power: 1
[208.048959] ------------ [cut here] ------------
[208.048986] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.049005] autorequest GPIO-277
[208.049032] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.049062] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.049090] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.049120] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.049150] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x1c / 0xe0)
[208.049184] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x1c / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.049216] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.049246] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.049274] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.049401] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.049513] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.049546] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.049575] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.049598] --- [end trace efdb195c270b2d99] ---
[208.049619] ------------ [cut here] ------------
[208.049636] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.049654] autorequest GPIO-272
[208.049673] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.049701] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.049729] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.049758] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.049788] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x28 / 0xe0)
[208.049820] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x28 / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.049851] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.049880] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.049908] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.050014] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.050116] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.050146] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.050175] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.050200] --- [end trace efdb195c270b2d9a] ---
[208.050219] ------------ [cut here] ------------
[208.050235] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.050253] autorequest GPIO-273
[208.050270] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.050298] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.050326] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.050354] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.050384] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x34 / 0xe0)
[208.050415] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x34 / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.050446] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.050475] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.050503] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.050604] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.050725] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.050755] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.050784] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.050808] --- [end trace efdb195c270b2d9b] ---
[208.050885] ------------ [cut here] ------------
[208.050905] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.050925] autorequest GPIO-274
[208.050944] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.050974] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.051003] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.051032] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.051065] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x40 / 0xe0)
[208.051098] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x40 / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.051129] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.051158] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.051187] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.051298] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.051404] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.051435] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.051465] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.051490] --- [end trace efdb195c270b2d9c] ---
[208.051510] ------------ [cut here] ------------
[208.051527] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.051548] autorequest GPIO-275
[208.051566] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.051595] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.051624] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.051653] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.051683] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x4c / 0xe0)
[208.051717] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x4c / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.051748] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.051778] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.051807] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.051909] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.052012] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.052042] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.052071] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.052096] --- [end trace efdb195c270b2d9d] ---
[208.052116] ------------ [cut here] ------------
[208.052132] WARNING: at drivers / gpio / gpiolib.c: 101 gpio_ensure_requested + 0x44 / 0x1a0 ()
[208.052152] autorequest GPIO-276
[208.052169] [] (unwind_backtrace + 0x0 / 0xe0) from [] (warn_slowpath_common + 0x4c / 0x64)
[208.052197] [] (warn_slowpath_common + 0x4c / 0x64) from [] (warn_slowpath_fmt + 0x2c / 0x3c)
[208.052225] [] (warn_slowpath_fmt + 0x2c / 0x3c) from [] (gpio_ensure_requested + 0x44 / 0x1a0)
[208.052253] [] (gpio_ensure_requested + 0x44 / 0x1a0) from [] (gpio_direction_output + 0x80 / ​​0x238)
[208.052284] [] (gpio_direction_output + 0x80 / ​​0x238) from [] (rk29_sdmmc_gpio_open.constprop.7 + 0x58 / 0xe0)
[208.052314] [] (rk29_sdmmc_gpio_open.constprop.7 + 0x58 / 0xe0) from [] (rk29sdk_wifi_power + 0x54 / 0xcc)
[208.052345] [] (rk29sdk_wifi_power + 0x54 / 0xcc) from [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30)
[208.052374] [] (wifi_turn_on_rtl8192c_card + 0xc / 0x30) from [] (wifi_turn_on_card + 0xc / 0x14)
[208.052402] [] (wifi_turn_on_card + 0xc / 0x14) from [] (wifi_activate_usb + 0x18 / 0x30)
[208.052503] [] (wifi_activate_usb + 0x18 / 0x30) from [] (init_module + 0x40 / 0x6c [wlan])
[208.052605] [] (init_module + 0x40 / 0x6c [wlan]) from [] (do_one_initcall + 0x90 / 0x160)
[208.052636] [] (do_one_initcall + 0x90 / 0x160) from [] (sys_init_module + 0x1698 / 0x1828)
[208.052665] [] (sys_init_module + 0x1698 / 0x1828) from [] (ret_fast_syscall + 0x0 / 0x30)
[208.052689] --- [end trace efdb195c270b2d9e] ---
[208.257285] wifi turn on power
[208.367850] bFWReady == _FALSE call reset 8051 ...
[208.409472] usbcore: registered new interface driver rtl8188eu
[208.781361] ==> rtl8188e_iol_efuse_patch
[209.067314] ADDRCONF (NETDEV_UP): wlan1: link is not ready
[209.072919] ADDRCONF (NETDEV_UP): wlan1: link is not ready
[209.083381] ADDRCONF (NETDEV_UP): wlan0: link is not ready
[209.089017] ADDRCONF (NETDEV_UP): wlan0: link is not ready
[213.087391] RTL871X: nolinked power save enter
[232.394674] ==> rtl8188e_iol_efuse_patch
[232.754657] RTL871X: nolinked power save leave
[236.753968] RTL871X: nolinked power save enter
[259.292370] wlan: Unknown symbol rkwifi_set_firmware (err 0)
[265.377986] ==> rtl8188e_iol_efuse_patch
[265.657929] RTL871X: nolinked power save leave
[269.657764] RTL871X: nolinked power save enter

[Alex --- Sh]

Brbr @ 11/23/2013, 9:42 PM

Alex --- Sh
Can you lay out dmesg from a successful download from 8188eu?

I can not, sold this whistle. But maybe colleagues will lay out ...

Brbr @ 11/23/2013, 5:50 PM

very similar to mk802iv

So:

or so:

others have not come across yet

Post has been editedAlex --- Sh - 24.11.13, 22:53

[brbr]

Partially figured out, before this introduced

insmod 8188eu

did not find it in

lsmod

and considered the attempt unsuccessful, but then looked

ifconfig

- and there appeared a new interface, so wifi works!
But it is not clear why when it starts the system it is not picked up, it is necessary to invoke insmod every time.

Alex --- Sh
And what about your whistles with speed? I compared with Linaro on Odroid - everything there flies as if it were a personal deal, and on the 3188 everything is much more thoughtful, is it something else in the GPU?

Post has been editedbrbr - 24.11.13, 11:12

[Alex --- Sh]

[email protected], 13:11

Linaro on Odroid - everything flies there

It will also fly when, finally, give birth to the driver of hardware acceleration of the GPU under RK3188 for Linux

[email protected], 13:11

you have to insmod every time you call

You can insert a line
insmod /lib/modules/8188eu.ko
in /etc/rc.local file
for autorun WiFi when loading Linux.

Post has been editedAlex --- Sh - 24.11.13, 22:55

[Alex --- Sh]

Interesting: happy:
here, hereand furtherhere


Post has been editedAlex --- Sh - 19.12.13, 23:04

[olegk0]

Alex --- Sh @ 11.24.2013, 23:37

It will also fly when, finally, give birth to the driver of hardware acceleration of the GPU under RK3188 for Linux

Hello

What is meant by the GPU? Mali?

Sort of like Mali 3d works on RK3188 (https://github.com/Galland/Linux3188.git),at least on rk3066 without problems xbmc under linux for more than half a year as

just how it will help speed up the interface, or what should it fly there?

I have not watched the RK3188 yet, but on the 3066 there is also a 2D RGA processor and a separate VPU for video decoding

here RGA principle can be used to speed up the drawing (copying fill) and all the information is there

with VPU yet nothing like

Post has been editedolegk0 - 20.12.13, 20:20

[brbr]

On MK089v5 ubuntu who already launched? (with omegamoon core)

[brbr]

New Year's gift !!!
SDK under MK908
http://www.cnx-software.com/2013/12/31/android-4-4-2-kitkat-sdk-released-for-rockchip-rk3188-mini-pcs-mk908-mk908-ii-mk918- and-a9 /
it remains to check whether it is suitable for v5

[Alex --- Sh]

[email protected], 22:19

Sort of like Mali 3d works on RK3188 (https://github.com/Galland/Linux3188.git)
here RGA principle can be used to speed up the drawing (copying fill) and all the information is there
with VPU yet nothing like

olegk0. If it is not very difficult, explain more simply: “what is missing in the soup”?
Androyde video acceleration works!