Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Prestigio MultiPhone 5044 DUO - Firmware |
Message#1 19.10.13, 18:35 | |
suum cuique [offline] Group: Friendssavagemessiahzine.com Messages 975 Check in: 28.08.13 Samsung Galaxy S5 SM-G900F Reputation: 1179 | Prestigio MultiPhone 5044 DUO - Firmware PAP 5044 Duo Description | Discussion �| Firmware Drivers and Utilities Drivers //savagemessiahzine.com/forum/dl/post/3374480/MT65xx_USB_Driver.zip //savagemessiahzine.com/forum/dl/post/3374482/GN_MTK_USBDriver%28Factory%29_V1.1.0_1.rar All drivers together, plus Adb Driver Installer: All in one Driver to make our device USB WIFI modem Cn SW.egorka_kiev Firmware Official firmware Flash Tool Firmware Full firmware dump 1.0.49 Firmware 1.0.21 Firmware 1.0.31 - this is a firmware dump(Merged via flash from the phone version. There are no special changes). I advise you to read before installinghere is this post Takenfrom here Thank uv.sku11man Firmware 1.0.29- assembled, but proven.Thank uv.DarkZombi Firmware 1.0.42- collected.Thank uv.DarkZombi OTA firmware (updates) This is an OTA update (flies by "air") Firmware 1.0.29 Firmware 1.0.42The link name indicates which firmware version to install the update on. from v.1.0.29 to v.1.0.42 from v.1.0.31 to v.1.0.42 Firmware 1.0.45 Update from 1.0.42 to 1.0.45 Stock Files to restore (under CWM) There will be laid out various firmware / firmware elements needed to restore the phone. To use them you needcustom recovery Net 1.0.29 on Yandex.Disk Thank uv.Dimak.74 Official firmware backups Firmware elements Corefrom firmware 1.0.21 Modem (radio module)from firmware 1.0.21 Modem (radio module)from firmware 1.0.29Cn SW.DarkZombi Libycameras.(Put on any firmware) Cn SW.DarkZombi Unofficial firmware �������� �� ������ ����� downloadLite Stock Mod PAP5044 1.0.47 1.0.47 Light Rom v.2 "- Deodex firmware based on our 1.0.42 - Root, BusyBox are built the freshest (including binaries) - System applications passed alignment (it is zipaling) - When installing the firmware installed Carvil Touch Recovery 2.2 - Cleaned up all sorts of MTK widgets and applications, for the replacement of which added below listed ... - Home screen from 4.4 "... Some applications were removed, new ones were added in their place ... The whole emphasis on changes was made on patches ... These, more detailed explanation and screenshots arehere Downloadwith google disk Full version PAP5044 Odex and Deodex 1.0.42 / 1.0.45 Odex.original rom 1.0.42 Firmware on the basis of. stock 1.0.42: "Built - init.d, nano, bash, SuperSU, busybox. ... Modified-Deleted - Removed ads at startup (navitel navigator), deleted files that hit custom recovery, removed two applications - Game Live, and the game from Prestigio, updated all Google applications (removed a bunch of junk), all Google applications moved to the Data section (except the market) , the hardest - the desktop wallpaper was changed :)) " Before installing, please read the originalby fasting Download fromMail.ru Cn SW.DarkZombi Lite Deodex v1.0.42 for PAP5044 Description Deodexed and slightly cleaned firmware 1.0.42. There is a root. Removed the reader, office, installer, toy, etc. Added: Weather widget and ES Explorer. ... Hereoriginal post patches Thank uv.anatoli621 Original Rom 1.0.31 Version 1.0.31 was not (and will not be) available for download and installation as an OTA update! Description Firmware in zip format, installation through recovery (CWM) The firmware is fully consistent with the original. What added, changed-SuperSu, BusyBox, nano, init.d, deodex, automatic zipalign with firmware. Firmware easily supports memory markup, and further changes. Tested, everything is OK. Downloadwith Yandex.Disk HereThe original post, where there are several screenshots and detailed installation instructions. Firmware lined uv.DarkZombi Original Rom 1.0.29 Description Firmware in zip format, for installation via CWM (recovery) Not what was not removed, did not change, all as in the original firmware 1.0.29 Added SuperUser, BusyBoox, made deodex, zipaling (firmware specifically designed for memory markup, and further development) Downloadwith Yandex.Disk HereThe original post, where there are several screenshots and detailed installation instructions. Firmware lined uv.DarkZombi Stock ROM 1.0.29 Firmware laid out by uv.DarkZombi Firmware description This is stock (standard) firmware, version 1.0.29 Firmware fully deodexed (deodex), carried out by zipalign Established: root rights (SuperSU), busybox, Apex launcher, OG Battery MOD changing the battery. Removed unnecessary, butanimation Instead of the standard ANDROID screensaver, now Prestigio 5044, sounds to turn on, turn off now Hi, Bye as in Windows7 Corrected the version of android from 4.2.1 to 4.2.2 Hereoriginal post and screenshots. Download from Yandex.Disk Light rom Firmware description The firmware is based on Stock Rom, but: Cleaned up trash, replaced the shell, added new applications and Xposed kitchen. Also attached is an App Pack, which contains probably the best applications. In general, for those who love stock and no time Heredetailed description, screenshots and tips Download Rom from Yandex.Disk Download App Pack from Yandex.Disk MIUI Catalog of topics for MIUIv5 Regarding the possibility of upgrades toMIUI v6 Fastwith info How to login to your XIAOMI account How to login to your XIAOMI account Fast with instruction What is MIUI This is the firmware compiled on the Android source, but with: Fully redesigned interface Built-in installation of themes for the system Improved standard applications Increased productivity and much more ... 14 MIUI chips 1. To take a screenshot - press the power button and the volume - simultaneously, the file will be saved to / DCIM / Screenshots 2. To turn on the flashlight on the lock screen, press and hold the "House" to fix the light - hold it longer. Disconnect - press the power button. 3. On the lock screen, double-click on the lock icon so that the player control buttons appear. 4. Tap and hold the house on the main screen to display the regular taskkiller. The bottom button can kill all current processes. To kill a single process, you need to swipe it up from the list of applications. So that the process is not killed by the Taskscaler, you need to lock it down for the Taskler with a swipe down. 5. You can terminate calls with the power button to activate it go to settings>Specialist. features and turn on the option Power button ends the call 6. You can nail the current application by long pressing "Back" to turn it on - go to settings - keys. 7. Pressing simultaneously Volume + and back unlocks the phone (if suddenly you do not understand how unlocking works in a new topic) 8. To temporarily set the maximum brightness of the screen - press Volume + and Menu at the same time, the brightness will remain until the lock. 9. You can turn off the melody when an incoming call is flipped through the phone (in the dialer settings) or by pressing the Volume- 10. On the lock screen, a long press "Back" will turn on the camera (Settings - Keys - Camera on the lock screen - on) 11. Pinch on the desktop will put you into edit mode. 12. Icons are located at random? Turn on the edit mode and shake the phone three times, the icons will disappear :) 13. Customize the switches by clicking on “More” in the switch panel, you can drag them in the order you like. 14. Tired of something hanging in notifications? To turn it off, click and hold on this notification ->User notifications. Club firmware in our forumhere Herecan find themes for firmware An alternative way to install themes in small quantities ishere for the way thanks uv.greeshan HereDifferent ported applications for MIUI from different shells HereXperia app suite ... ScreenshotsThis firmware can be viewedhere Herethere are gappscn SW.sku11man Our device is not officially supported by the MIUI development team. Assemblies for us port uv.anatoli621and uv.hollydenis. Also worked on this firmware uv.DarkZombiand uv.dwalx- We express our gratitude for the work. MIUI RedRice v.25 v.28 Fast with description and screenshots V29 Mod MIUI Red Rice 30 Ru for PAP5044 MiSOUNDrom-REBORN MisoundRom-Final MISOUNDROM V4 MIUI Red Rice 31 mod Ru for PAP5044 Dwalx builds All versions of firmware for our device arehere. You can learn about the new firmware version, firmware properties, mods, jewelry, etc.by thispost The new version comes out on Saturdays! A new donor has appeared - Zopo C2. Those who wish to test, unsubscribe in the subject please. Build in that cloud folder, but there is a mark in the titlec2 MIUI for PAP5044 As a donor, the firmware was taken from the MIUI site, translated by jBART, cleaned. Collected on the basis of stock 1.0.42. This is a self-assembly, and not a converted firmware uv. Dwalx'a and uv. DarkZombi. When you first turn on disable data transfer via SIM card. Originalfastwith Actual versions, explanations, screenshots and patches. Miui for PAP5044_4.8.29 (multi language) MIUI SE for PAP5044 (Special Edition) Latest for MTK6589 We thank u.anatoli621 Build DarkZombi H.DarkZombiStopped porting MIUI for our device. Below are the latest versions made by him ... 4.2.18 4.2.23 Patches, tweaks We put all patches through recovery (CWM) - without wipes! -Patch keyboard from Prestigio (with firmware version 1.0.42)I.disk -Patch for free themes (works with version MiUi 4.1.26)I.disk -Patch camera install from LenovoI.disk -The patch removes the Chinese market and the application "games"I.disk -Patch adding FMradio from Lenovo, a fully working radio, even recording from the air!I.disk PS: if it does not work, after the patch, the standard radio, then you need to remove it with pens on the system / app / path LEWA OS v6 LeWaOS v6.0 by hollydenis LeWaOS v6.0 by anatoli621 Fast with description and screenshots LEWA OS The firmware reminds many MIUI, but a bit different interface. Behaves fairly well. Stable. LeWaOS5.1_stable_by-hollydenis Complete builds from DarkZombi SW.DarkZombiworked with Lew’s for our device. These are the three most recent builds from it: 17.01.14- The most stable. 22.02.14- Proven 07.03.14- Latest build Patches, tweaks We put all patches through CWM (recovery), without wipes! -Patch keyboard from Prestigio (with firmware version 1.0.42)I.disk -Patch installing JB_keyboard (stock clave JB)I.disk -Patch installing SuperSu (superuser rights)I.disk -Patch camera install from LenovoI.disk -Patch adding FMradio from Lenovo, a fully working radio, even recording from the air!I.disk PS.If not working, after the patch, the standard radio, then you need to remove it with pens on the system / app / path -Patch adding Roboto font from Android 4.3 to LewaOS 5.0I.disk - Rollback to standard fontI.Disk -Patch adding voice search google and Viper4Android.FX (equalizer with many effects)I.Disk Also there is darktheme LeWa OS 5.1 For PAP5044 from SW.anatoli621 "I have long wanted to try LeWa on my smart, but since I don’t use other ports, I made my own ... The firmware weight is 251.9 MB ... Everything seems to be working ... There are no Gaps in the firmware ... Install via CWM from all wipes Here and hereare the most current build, their detailed description, screenshots and patches. Also in this post thereNostalgia LeWa OS dated 08/15/2013, in which there is still a menu and a lot of interests. Outdated options / builds A couple of the most basic builds from S_as Version 1.11.13 Download from Yandex.Disk Description assemblies Be here Cons build LED notifications do not work, only the charging diode responds ... Version 11/15/13 Download from Yandex.Disk Corrected build.prop Cons build The Play Market does not work (you need a fixed build.prop) MIUI Standart 2 MIUI-EXTASY MONSTERFAT OMG-MIUI GK-Lollipop for PAP5044 MIUI7 for PAP5044 MIUI-ALPHA Nokia Lumia for PAP5044 The new dawn New_YunOS 3.0 MIUI Simply ColorOS by ATs v2.6s EternityOS VIBE UI Mod Eternity OS final LEWA 5.1 FINAL (STABLE) MIUI6 for PAP5044 LegoIce_3D_UI Port Narutofied_Stock_512 _v3.1_EN Lg g2 YunOS 3.0 ETERNITY OS ShenduOS MICRONOTE-V4 All in One for PAP5044 V1.1 HTC-MaterialMOD MICRONOTE-V3 X-TOUCH PXZ2 + BBK Handos Nextburst MisoundROM-V2 Fast with firmware Micronote v.2.0 Fast with firmware MICRONOTE for PAP5044DUO Fast with firmware HOSP L ROM for PAP5044DUO Fast with firmware EmotionUI_by-hollydenis EMUIflymeOS VowneyPort_for5044duo Fast with firmware KELEos_by_hollydenis Fast with firmware MUSE UI 3.0 Fast with description and firmware ZOPO C2 port Fast with description and firmware Ex os Fast with description and firmware SAMSUNG NOTE 3 Fast with description and firmware KELE UI 1.8.7 Fast with description and screenshots Vibe UI v.2.0 Fast with description and screenshots Explay X-Tremer Port For PAP5044 Fast with firmware AndroIum_3.8.0 for PAP5044 Fast with firmware Funtouch OS for PAP5044DUO C o l o r OS v.2.0 iPhone 5S Acer Liquid (Android 4.2.2 Yandex.Kit For PAP5044 Working port of Yandex.Kit firmware Everything is tied not to Google but to Yandex. Fastwith description and screenshots Downloadwith YandexDisk Thank you for your work.anatoli621 HTC One M7for PAP5044 "Original -Referenceon needrom Disadvantages: only the first sim card works. There is a wish - we test, we share impressions about the port. " Stock Sence with dvuhsimochnika HTC. Android 4.2.1 Fastwith description and screenshots Downloadwith YandexDisk Thank you for your work.anatoli621 HTC One M8for PAP5044 "Working clone HTC One M8 ... I collected the firmware from a bare clean android 4.2.1 with the port of HTC One M7. Globally changed almost all the graphics (can be seen on screenshots). New launcher from M8 ... Nice interface, new graphics, news world, social networks, etc., and the weather is always at hand on the desktop " Fastwith descriptions and firmware originals Originalfastwith screenshots Downloadwith YandexDisk Thank you for your work.anatoli621 EMOTION_UI_PAP5044 Baidu OS_PAP5044_v5.1 Mobile OS from the Chinese search engine Baidu (compiled on the basis of flow 1.0.42). There is a root. Firmware for tests, everything works basically. It looks like Lewa and MIUI but with its own buns. Translation at the level of 95%, the notification LED does not work. Linkto the original post with information, screenshots and a full description Downloadwith Yandex.Disk Color_V1.6 for PAP5044 ColorOs exlusiv -15.02.14: "I smashed the alarm clock, set the stock from JB (the alarm clock did not work with the flip closed, it works now!), Changed the radio (it became more pleasant, but does not sound to the external speaker, only works in headphones), corrected the core, added SuperSu Pro, + optimization Built on the basis of firmware 1.0.42 This is the stock firmware of OPPO phones. test, look around) Shortcomings: -Radio to external speaker (it works in headphones) -When the body is turned off, the charging does not show the battery (the charge itself is on) Detailed description, screenshotsHere Download from Yandex.Disk Viberom Alternative firmware from Lenovo. A lot of interesting things, but the assembly - ports: there are drawbacks. Thank you for your work.anatoli621 Current version (v.3) The new version of Viberom (there will be no more updates for 4.2.2), the kernel and any from the runoff 1.0.45. Everything seems to be working, it has become even faster, better, more beautiful, etc. There are interested - we are testing. Install via CWM with all wipes. When you first turn on, you do not need to choose the Russian language (everything is in Russian by default, but there is no choice in the system) just click next. Fastwith screenshots, links and patches Download from YandexDisk Version 2 The main works like everything, everything in Russian. Does not work: front camera, apparently it simply is not in the source (maybe something else, I did not have time to check everything) Disadvantages: the internal memory is not displayed correctly (it did not figure out whether it redistributes or not, it seems to be simply not displayed correctly, but I warned that everything is at your own peril and risk). There are willing - test. Install via CWM with all wipes. Download from YandexDisk Fastwith screenshots and patches Viberom v1.0 Works main camera, flip, LED event. The main works like everything. Does not work: front camera (maybe something else, I did not have time to check everything) Disadvantages: internal memory is not displayed correctly (it didn’t figure out whether it redistributes or not, it’s just not displayed correctly, but I warned that everything is at your own risk and risk), not a full translation into Russian, the weather doesn’t see our cities After downloading to the desktop 2 folders in Chinese, just rename. There are willing - test. Install via CWM with all wipes. Download from YandexDisk Fastwith screenshots and patches PureXperia Z2 for PAP5044 by anatoli621 At the request of workers screwed the port to our smart. ... Android 4.2.2 (4.4.2 - fake, for Ponto), the name of the smart in build.prop did not change, it is defined as C2305. Multilanguage, the first start in Russian (the first download is long), is root, the gaps are built-in, everything seems to work. Fastwith screenshots and patches Thank uv.anatoli621 Download from YandexDisk by vitalliybozhko X-Mi_UltimateFor PAP5044 "I offer for testing the firmware - a wild mixture of MIUI and Sony, well, you never know .... Found on Ineta, ... I did not change anything, I just adapted it to our smart, I did not particularly test for bugs. There are willing - test. " Download from YandexDisk Fastwith screenshots and descriptions Thanks for the find uv.anatoli621 Port Stock Sony XperiaC for PAP5044 The port of the clean Sony XperiaC firmware, did not delete anything, Root added. In build.prop, the name of the body did not change, it is displayed as C2305 (Sony Xperia C). Download from YandexDisk Fastwith screenshots and descriptions Thank you for your work.anatoli621 Port Sony XperiaC v2.0 How could podshamanil port Sony XperiaC. The memory seems to have been repaired, the working flip is willing, test it. Does not work: the illumination of the lower soft keys, the LED on the event. I did not do a lot of screens, everything is the same as in the first, it is the same port, the current is slightly correct. Install via CWM with all the wipes (this is the firmware, not the patch). Fastwith screenshots and patches Downloadwith Yandex Disk. We thank u.anatoli621 XFlare for Prestigio 5044 ShenduOS For PAP5044 I suggest the ShenduOS firmware for tests, everything basically works. Disadvantages: not a full translation, there are no Russian letters on the dial and in the search for contacts. The firmware is smart, there is Root, Android 4.2.1. Heredetailed description and screenshots. Downloadwith Yandex.Disk DownloadGapps Port_Acer_For_PAP5044 The port of the stock firmware Acer V370 Liquid E2 Duo based on Android 4.2.2, it works like everything. There is a Root, a separate selection of a call melody for each SIM card. Did not delete anything. There are willing - test. Fastwith descriptions, instructions and screenshots Downloadwith Yandex.Disk We thank uv for this port.anatoli621 ProjectDoge For PAP5044 I will lay out this firmware for tests (maybe someone needs it), firmware in Russian. Full zakos under KitKat, 3D task manager, etc. A lot of things were crammed into the firmware, I didn’t delete anything, there is a root - everyone will delete the superfluous himself (which he deems necessary). HereA detailed description of the "goodies" and screenshots. Thank you for your work.anatoli621 Downloadwith Yandex.Disk KENEKSI_OMEGA _Port_For_PAP5044_4.2.2 PaperHd For PAP5044 "Deodexed and cleaned firmware based on Android 4.2.1 (base - sink 1.0.42). There is Root, Deodex, Zipalign, init.d. Separate selection of a call melody for each SIM card, a dialer with two call keys, a fast, stock launcher in landscape form, optimized. There are those who wish - test " Fastwith instructions and screenshots Downloadwith YandexDisk Marsapa rom v22.1 for PAP5044 "They asked to screw the firmware to our smart -Referring to Needrom From the original 1-deodex; 2-Zipalign; 3-busybox; @ 4k - root; 5-Xposed framework; 6-Gravitybox; 7-dual sim ringer; 8-OgBattery; 9 direct-access mode all'engineer and factory mod settings; 10-Sony walkman player; 11-Viper4android FX 12-marine compass; 13-custom logo (thanks ramson); 14-custom bootanimation (thanks morgan7676); 15-Led notiche blue; 16-New default wallpaper. It seems nothing so flash, there is a wish - test it. " Linkto the original post with screenshots. Downloadwith Yandex.Disk We thank uv for this port.anatoli621 4.4 (fake) For PAP5044 "AnotherKitKat , in fact, it is all the same Android 4.2.1 ... There is a Root, a working T9. There are no serious bugs, there are those who wish - test " Linkto the original post with screenshots. Downloadwith Yandex.Disk For Google sync to work, you need to "Download and install full gaps for 4.2.2, for examplethese" We thank uv for this port.anatoli621 Nexus Mod For PAP5044 Pure 4.2.1 Linkto the original post with screenshots. Downloadwith Yandex.Disk We thank uv for this port.anatoli621 Mod S920 For PAP5044 v2 The Lenovo S920 port is a new version (the first on Lenovo's 117 firmware, this is on 121), was looking for how to make a patch, found a new mod. There are interested - we are testing. HereDescription, screenshots and patches Downloadwith Yandex.Disk We thank uv for this port.anatoli621 Mod S920 For PAP5044 This is not the firmware from Dimak.74, it is a completely different port of the Lenovo s920 firmware. There are no problems with the processor. When you first boot, GPS and data transfer via a SIM card is turned on - turn off immediately after downloading a smart card. Detailed description of goodies, screenshots, patches areHere We thank uv for this port.anatoli621 Downloadwith Yandex.Disk port with Lenovo s920 Lenovo s920 clean drain port. "Changed: Added root, icon of the engineering menu, deodexed, a bit of optimization ...." Full description with screenshotsHere Download from Yandex.Disk Thank uv.Dimak.74 Port Zopo For PAP5044 The firmware port from the Zopo phone for our smart (compiled based on the stock v. 1.0.42), works like everything, the firmware is lively and with a lot of buns. There are willing - test. Downloadwith YandexDisk Fastwith the original description of snacks (there are a lot of them), screenshots and patches. We thank uv for this port.anatoli621 SGS5 For PAP5044 Original -Needrom Firmware for tests, it works like everything. Android 4.2.2 (4.4.2 - fake), in build.prop the name of the smart did not change. Disadvantages: incomplete translation. Fastwith the original description, screenshots. Downloadwith YandexDisk We thank uv for this port.anatoli621 SAMSUNG NOTE 3 For PAP5044 Another variation on the theme of SAMSUNG. It works like everything. Disadvantages: incomplete translation, no Russian letters on the dialer. Fastwith the original description, screenshots and patches. Downloadwith YandexDisk We thank uv for this port.anatoli621 S4_fix "This firmware is similar to Samsung Galaxy S4 ... -Collected from android 4.2.1 (1.0.42), 4.2.2, 4.2.3 (S4) ... -In the firmware is not a full translation into Russian, approximately translated to 97% ... “The only thing that doesn't work is the radio through an external speaker ..."In the post indicated an alternative solution Download from Yandex.Disk Fastwith a detailed description, instructions and screenshots.Thank uv.DarkZombi Prestigio TouchWiz Note3 For PAP5044 "Firmware based on Android 4.2.2, first start in Russian (multilanguage), there is Root, there is support for init.d (there are no scripts in the firmware, there is a stub), a working Russian T9. Still need to work with the firmware (the main thing works), but there is no time (and desires), there are those who wish to help in the finalization of this port - you are welcome. I did it first of all for myself, there are those who want to test it. I do not plan any improvements and patches yet, like other ports, use one or the other for your choice. " Originalfastwith screenshots, instructions.Thank uv.anatoli621 Download from Yandex.Disk Port Philips For PAP5044 "The Philips firmware port for our smart (compiled on the basis of stock v. 1.0.42), everything seems to work. I did everything for myself, there are those who want to - test it" Fastwith a detailed description of goodies, instructions and screenshots.Thank uv.anatoli621 Download from Yandex.Disk YunOS_V2.7 (Aliyun OS) TEST For tests (familiarization) firmware YunOSin English(from time to time it skips Chinese). Asked - get - test. Fastwith original description and screenshots. Redone uv.anatoli621 Download from Yandex.Disk CyanogenMod 10.2 For PAP5044 (TEST) "A half-worker CyanogenMod 10.2 (Android 4.3 !!!) for MT6589 has appeared. Who does not know - a month ago, CyanogenMod 10.2 did not even start on our process ... Does not work: camera, auto brightness, external speaker, sim2, gps, bluetooth, radio (wrote from memory, maybe not all remembered). Only for tests, do not write what needs to be fixed, everything that works is all that can be run on our core. Maybe someone else that will improve the thread, I did not succeed " The firstandSecondposts with descriptions Download from Yandex.Disk Thank uv.anatoli621 Custom recovery What it is Custom Recovery is a utility that is required for: - Create a full backup of the OS (firmware) of your phone. - Firmware unofficial mods, custom firmware. Also, with the help of recovery, you can do a full reset, format the device memory sections and a USB flash drive, and also make partitions on a Lunix flash drive. There are several types of castes. recovery: CWM Recovery (ClockWorkMod recovery), TWRP, etc. The most common is CWM (it is simpler and clearer than anyone else) Moving through items of custom recovery is done: "Volume +" - item up "Volume -" - item down "CL. ON." - item selection DingDong Recovery Philz Touch Recovery 6.43.8 Carliv Full Touch Recovery CarlivTouch-recovery-2.7 Fast with info Carliv Full Touch Recovery Fast with info. Thank uv. anatoli621 CWM Version 5.5.0.4 Version 6.0.40 Version 6.0.4.4 Image Recovery v.2.2 for installation via Mob. Uncle.Thank uv.seregar Image Recovery v.2.1from uvseregar Image Recovery v.2 for installation via Mob. Uncle. Archive with v.2 to install (update) through the recovery. Wayinstallation using a PC, based on the system files in the phone (ensures operability) This version also has Aroma File Manager. To make it work you need to download this one.archive. unpack it and put the clockworkmod folder on the SD card. To enter it you need to select Carliv in the recovery, and then Aroma File manager. CWM 6.0.3.4 I suggest for tests CWM 6.0.3.4 recovery. This is a button recovery, not a touch. Formfor installation via mobile uncle(unpack the archive and rename CWM 6.0.3.4.img to recovery.img) image + scatterfor installation via SP Flash Tool Thank uv.anatoli621 TWRP TWRP 2.6.3.0 Fastwith info. Thank uv.anatoli621 Theme and AROMA File Managerfor this version of recovery.Fastwith explanations and screenshots.Thank uv.seregar TWRP 2.5.0.0Slightly tweaked uv.seregar TWRP 2.5.0.0for our device.Thank uv.dwalx Themes for this recovery (v. 2.5.0.0) arehere + a couple more + here is fully working MIUI Recovery for PAP5044 Instructions Memory remapping Device recovery Instructions for increasing the volume through the engineer Link to post with instructions DOLBY SOUND for any firmware How to make a full firmware dump Instruction I can add to it that the drivers and the Flash Tool can be taken from our header - theyexactlywork with our phone. How to make a backup (Backup) Backup, also called "Backup", is a complete copy of your phone's OS. The so-called "Backup". It includes all the settings, data and applications that were at the time of saving. The amount of free space to save is desirable to have about 1.5 GB To make Backup you need: - Enter custom recovery, - Select the item "Backup and Restore" - Click the item "Backup"if you want to save a copy of the system to a USB flash drive Click "Backup to internal sd"if you want to save backup to your phone To restore Backup you need: - Enter custom recovery, - Select the item "Backup and Restore" - Click the item "Restore" or "Restore to internal sd", depending on where the backup is located. How to save / restore IMEI 1 way (save the entire section NVRAM) Need a custom recovery Heredetailed instructions2 way ROOT required What is IMEI? - These are very important system data, without which SIM cards will not work on the phone, and therefore there is no mobile network and no 3G Internet. To save IMEI you need: - Get ROOT rights - Download and installthisthe program - Allow its root access - Go to the item "Save and restore IMEI " - Choose one of two options for saving (at your discretion) To restore IMEI you need: - Have a copy of IMEI - Enter the Mobile Uncle (this is how we call this program) - Go to the item "Save and restore IMEI " - Choose your backup: "Recover IMEI from ..." Alternative recovery method Not verified! 1- On the phone dial * # * # 3646633 # * # * - after dialing the last asterisk you will immediately get into the engineering menu 2- Under the "Connections" tab, select CDS Information ("information CDS") 3- Choose Radio Information 4- Choose Phone1 (for the first imei) 5- at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.7," "(where in" "enter IMEI 1 sim) (should look like AT + EGMR = 1.7, "xxxxxxxxxxxxx" (xxxx is your imei) 6- click send command 7- should see the message "sent to mSend". 8-Then go back and select “Phone2” 9-at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.10,” "(where in" "enter IMEI 2 sim) 10-click send command, we reboot the phone 11-Dial * # 06 #, in order to check your IMEI. Took from the next branchFly vistaThanks for the instruction_H0LL0W_ How to set permissions (permissions) with letter G If you have a ROOT and want to replace any system files, After the usual movement using any file manager (root explorer, x-plore, etc. with root access), you need to long click on the moved file, in the "permissions" section check the boxes Sample Then you need to restart the device ... How to save installed applications and their settings 1 way (Titanium Backup) ROOT required Titanium Backup is a program that allows you to save all your applications, contacts, sms and mms, system and application settings, game progress, etc. in the phone's memory or on removable media (in the settings of the program, the item "path to the folder with backup copies"). To restore applications in case of system failure, flashing, the appearance of a new device, it will be enough (if you have root rights of course) install the program and specify the path to the backup folder. P.S. PRO version of the program allows you to do mass save / restore: for example, "All system applications", "Update existing RK" etc. Theme of the program 2 way (Helium) This program will allow you to save applications without using ROOT, but you need a computer Install Helium: Install Helium on Android Install and run Helium Desktop Windows users must install ADB drivers for their device Connect Android device to computer Helium on Android is activated and ready to go. Theme of the program- there you can find everything you need to work with it, including the premium version. Instructions for installing / updating the official firmware Installing official firmware via Flash Tool Before flashing via Flash Tool highly recommend to keepIMEI 1. Unpack the archives of the SP Flash Tool and firmware. It is desirable that the path to the firmware was not long and did not contain Russian characters. 2. Turn off the smartphone. The cable is not connected to the computer. 3. Take out the battery. (You can insert, if you do not have time to update the driver - taking out, inserting - taking out akb can be repeated until the result - installing drivers). 4. Download drivers, unpack. We connect the phone to the computer with a cable. The operating system will find a new device - specify the folder with the driver for your OS version. You can try to connect with the Volume + key held down. Check in the task manager whether the drivers are installed (Whether the device is defined in the device manager). 5. Disconnect the smartphone from the computer. 6. Insert the battery. 7. Run the program Flash_tool.exe. 8. Push the button Scatter-loading and select the file MT6589_Android_scatter_emmc.txt (it lies in the folder with the firmware). 9. Push button Download . (Upgrade sometimes helps). 10. We connect the phone to the computer with a cable. The program should see it and start the firmware. If the phone is not found, then disconnect it from the computers, remove and insert the battery and reconnect to the computer. 11. After the end of the firmware disconnect the phone from the computer. 12. Is done Official firmware update (OTA update or update by air) The main thing for a successful OTA update - more than 200MB free space on the SD card, - the presence of stock firmware on the device, - unmodified recovery, - not changed system utilities, - not modified sections, - battery charge more than 30%. OTA update If the phone has access to the Internet, an alert about the system update should come. You will be given a choice: install or not. Select "update" and the phone will do everything. If the notification does not come, then go to "Settings" - "About phone" and find the item "System Update" there. When checking for updates, an update will be found and suggested. If it does not work out this way, then you can use the following method. Update through recovery - First you need to download the firmware archive - Unpack and copy to the root of the SD cardupdate.zip - Reboot tostock recovery - Select item "Install Update.zip " If nothing happens - do it in stock recovery "wipe data "and" wipe cash "(installed programs and personal data will be erased). - Select item "Reboot system now "after a successful update. How to install custom (unofficial) firmware - It is necessary to install custom recovery - Make Backup - Download archive with firmware - Copy the archive to the root of the memory card - Make a full reset via recovery: Wipe Data / Factory reset Wipe Cashe in the "Mount and Storage" make Format system - In the install zip point, select the item "choose zip from sdcard" - Select archive with firmware - Select the item "Yes" - After the end of the firmware, click "Go back" - Select "Reboot system Now" - Wait until the phone turns on. Instructions on firmware with full cleaning from uv.DarkZombi 1) We go in recovery, we do wipe (wipe) wipe data / factory reset - Removes sections data, system, sd-ext wipe cache partition - Removes cache go to "advanced" wipe Dalvik Cache - Removes Dalvik Cache wipe Battery Stats - Removes a file that collects information about the battery go go Back, then mounts and storage format / data - deletes the Data section format / system -Removes the System section. format / cache - Removes cache format / emmc - removes everything from the internal storage of the phone format / sdcard - removes everything from the memory card format / sd-ext - removes everything from the sd-ext section (by default, there is no separate topic in this section; there is a separate topic for this section) I do all the wipes and formats to make sure that I didn’t care about the old firmware (wip'y have to do it, format at its discretion) 2) Install the firmware (the firmware should be in the .zip format - example proshuvka.zip) We connect the phone to usb, to the computer, in the recovery we go to the "Mount and Storage" section Further "mount usb storege", and so on the computer we already have the downloaded firmware, we throw in the memory card (which has already been highlighted) firmware downloaded, click in the recovery "unmount", "Go Back", "Go Back" go to install zip from sdcard Choose choose zip from sdcard - This is if the firmware is in the memory card. choose zip from internal sdcard - This is if the penetration in the internal memory (emmc) Click on our firmware, an example of "install proshuvka.zip, installation went, after clicking" Go back ", and" reboot system now ". All phone reflash, wait 5-15 minutes, and rejoice) P.S. When updating the firmware It is necessary to do all the points, with the exception of the item related to a full reset. How to reboot into recovery Turn off the phone, Press and hold the "Volume +" button Press the "ON" key Wait for the screen to turn on. Then release the keys. How to install custom recovery Easy way (if the phone is operational) Need ROOT To install you need: - Install the program in Russian called"Mobile uncle" - Install it. Launch and allow it ROOT access - Download the desired recovery image - Put an image with a name like "recoveryXXX.img" in the root of the memory card (better than a flash drive) - In the point of the program "Recovery Recovery" choose an image and confirm your choice. Installation instructions only CWM via SP Flash Tool Hereeverything is described in detail. How to install CWM 6.0.4.4 using a computer (the most bug-free) Heredescribes how to install using a PC, based on the system files in the phone (ensures operability) How to make a full reset (Factory reset)? 1 way ) - Go to "Settings" - Find the item "Restore and reset" - Select the item "reset data" 2 way ) (through recovery) - Need to go to the recovery - Select "Wipe Data / Factory Reset" P.S. When flashing to a new ROM, it is recommended to format the "System" section. To do this, you need to enter the "Mount and Storage" item in the recovery and select the "Format system" Detailed description of recovery points Here are the main points of custom recovery. Those that are in any of them, which have to use most often. for CWM "go Back" - go to the previous settings level. wipe data / factory reset - Removes sections data, system, sd-ext(The most powerful cure for problems. Removes all user applications and settings) wipe cache partition - Removes cache In the section "Backup and Restore" Backup - complete system saving on a USB flash drive Restore - restore backup from a flash drive Backup to internal Sd - full system save to phone Restore to internal Sd - restore backup from phone’s memory Advanced Restore / Backup (to internal Sd) - selective backup / restore from the corresponding directory. In the "Advanced" section wipe Dalvik Cache - Removes Dalvik Cache wipe Battery Stats - Removes a file that collects information about the battery In the "Mount and Storage" section format / data - deletes the Data section format / system -Removes the System section. format / cache - Removes cache format / emmc - removes everything from the internal storage of the phone format / sdcard - removes everything from the memory card format / sd-ext - removes everything from the sd-ext section (by default this section is not on the phone, there is a separate topic for this section) If the phone is already loaded into the recovery, but you still need to transfer something to the device, then: - We connect the phone using USB to the computer, - In the "Mount and Storage" section, select "mount usb storege" (the computer will see the phone and flash drive in drive mode) - Throws everything you need. - Click in the recovery unmount (phone disconnect from the computer) - Click "Go Back" install zip from sdcard - the menu of files to install choose zip from sdcard - select installers with external microSd choose zip from internal sdcard — select installers from the device’s memory. for TWRP "go Back" - go to the previous settings level. In the "Wipe" section There are two points: Advanced wipe Here you can select the items you want to clear. Dalvik Cache - Removes Dalvik Cache cache - Removes cache data - Removes the Data section internal storage - removes everything from the memory card system - Removes the System partition. preload - Removes everything from the preload section (by default this section is not on the phone, there is a separate topic for this section) External SD-card - removes everything from an external memory card and Format data - clear all applications, backups and files on the internal memory card If you don’t touch anything and just hold the slider, then all applications and settings will be deleted. Backup - full system save Restore - restore backup In the "Advanced" section File manager - file manager In the "Mount" section If the phone is already loaded into the recovery, but you still need to transfer something to the device, then: - We connect the phone using USB to the computer, - In the "Mount" section, select "mount usb storege" (the computer will see the phone and flash drive in drive mode) - Throws everything you need. - Click in the recovery unmount (phone disconnect from the computer) - Click "Go Back" Based on the instructions for the firmware with full cleaning from the SW.DarkZombi Getting ROOT rights What is ROOT right? Root (from the English root - root; reads the "root"), or superuser - special account in UNIX-like systems (Android is),whose owner has the right to perform all operations without exception. Benefits : getting Root makes it possible to remove standard applications, change themes and shortcuts launch specialized applications that significantly extend the capabilities of a smartphone (usually such applications require Root rights). In addition, it is possible to change the system files (Recovery image, Bootloader, or images displayed on boot), Install applications on a memory card or transfer the cache of programs and games to it. disadvantages : First of all, the device loses the warranty and in case of “something like this”, provided that you cannot roll back your “device” to the official firmware, you will have to repair it exclusively at your own expense. For our device it will be enough to install firmware 1.0.21 via the Flash Tool to “return” the warranty. Another important drawback is opening Root privileges implies interfering with system files and entailing the loss of the ability to be updated “over the air” (install OTA updates) Ways to get The easiest The easiest way is to use the programFramaroot You need to download this application, Install it 2. Run, choose Superuser or SuperSU, to choose from, but better than SuperSU. 3. Zhmakaem Gimli, Sam, Frodo, Legolas, Aragorn, Gandalf, Boromir Any character you like, if available: D 4. A window popped up with a smiley :-) about successfully obtained Root rights. 5. Restart the device and enjoy: D! 6. After receiving the root rights, you can delete the Framaroot program! The method is more complicated and you need a computer 1. Turn on the debug mode on the smartphone. 2. Download and install the driver. 3. Download//savagemessiahzine.com/forum/dl/post/3374485/mt6589_rooter.zip 4. Unpack the contents and run from the archive run.bat 5. We use. PAP5044DUO Recovery miscellanea Embellishments Other Booth Logo When you turn on the phone, the very first picture will be replaced with the one you put from here. To complete the effect so to speak :) Installation via CWM on any firmware. Standard boot logo Thank uv.sku11man Booth-Logo MIUI Thank uv.dwalx XPeria Booth Logo takenfrom here Prestigio logo (alternative) takenfrom here Thank uv.Dimak.74 Another boot logo Another Prestigio logo from uvsku11man Add-ons for firmware Examples of design posts with new firmware / updates Just select the one you need from the code window and copy to the message. Can someone come in handy :)Delete is always easier than adding. New firmware [SIZE = 6] [/ SIZE]<= Name of firmware [SPOIL = Features] [/ SPOIL] [SPOIL = Description] [/ SPOIL] [SPOIL = Minuses (if any)] [/ SPOIL] [SPOIL = Screenshots] [/ SPOIL] [url = ""] Download from [/ url] Update Update for [url = ""] [SIZE = 3] [/ SIZE] [/ url] [SPOIL = Changes] [/ SPOIL] [url = ""] Download from [/ url] There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editeddestroyer71 - 26.02.19, 20:19 Reason for editing: editing |
Message#42 03.11.13, 17:46 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.11.08 Reputation: 0 | MIUI 3.11.1.- in the call log, after the restart, the contact name disappears, is defined as an unknown number. Does everyone have this or just me? How to deal? |
Message#43 03.11.13, 18:57 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | MIUI 3.11.1.- in the call log, after the restart, the contact name disappears, is defined as an unknown number. Does everyone have this or just me? How to deal? Try this: "Phone" ->"Settings" ->"Contacts"->"Additionally"->"Refresh Index" On the radio account I will do, if anything, the old is not a problem to return. Who can not wait, I can make a patch with the old radio. -------------------- TRUST NO ONE |
Message#44 03.11.13, 21:52 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.11.08 Reputation: 0 | |
Message#45 03.11.13, 22:19 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | |
Message#46 03.11.13, 22:42 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1184 Check in: 11.12.09 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 212 | On the radio account I will do, if anything, the old is not a problem to return. Who can not wait, I can make a patch with the old radio. there was also no sound before, although I caught the waves, the RDS showed -------------------- LG GT540 (CM7) ->Acer S100 (MIUI) ->LG P920 (CM10) ->Motorola MB860 (MIUI) ->Prestigio 5044 (MIUI) ->Doogee X5 pro (AOSP6.0) ->XIaomi RN3PP (AOSP8.1) ->Asus MaxProM1 (AOSP9.0) |
Message#47 03.11.13, 22:48 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | |
Message#48 03.11.13, 22:51 | |
Visitor [offline] Group: Active users Messages 19 Check in: 14.11.08 Reputation: 0 | After the reboot, the unknown number was again (((Funny, we had AMOI on the port like that. Does anyone have the same garbage? And on older versions of MIUI, too? The previous one was not there, everything was displayed normally. Radio also finds scans and is silent, and everything seems to work fine. |
Message#49 04.11.13, 11:39 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1184 Check in: 11.12.09 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 212 | Well, here's a small report on miui: Remarks 1) the shutdown of the screen does not work with a cover-cover (in the topic it seems to have written how to fix it) 2) bad "indication" - it has already been written, it is unlikely that it will be possible to fix it somehow, I think it’s in the core 3) make a limit on the time of the backlight on the locked screen (I usually have 10 minutes of backlight duration, and here comes an SMS, the screen lights up and these 10 minutes are lit. On my motorola, I have 15-30 seconds later with the same settings) 4) to remove the "emergency call" from the lock screen 5) notices that "Sim 2 is not found" fall out, would remove 6) sometimes the Internet falls off when you reboot (it simply turns off, you need to re-enable it through the curtain) 7) terrible brakes when sending / receiving mms pictures, with the text does not seem to lag. But it's like on all miui, I do not know 8) radio - it has already been written: everything seems to be working, but there is no sound (the recording also crashes) 9) applications (opera, navigator) periodically crash. but overall it seems to be stable, only one reboot was 10) Camera - video shoots just disgusting. I did not shoot on the drain, but when I looked at the reviews before the purchase, they said that it shoots well, even the stereo sound records 11) video plays poorly through the flash player, well now most sites on html5 have switched, but not all. in the same filmix it is impossible to watch a movie 12) programs installed on a USB flash drive when rebooting from folders on the desktop are removed, as if re-installed 13) there is no possibility to switch the player tracks by long holding the volume buttons when the screen is off (there was a goto on google - it is written that you need to edit the framework / androidpolicy.jar) 14) as it was already written, it would remove the MiSound item in the sound settings 15) I used to have a magnifying glass on myui when I entered text when moving the cursor and it was convenient to place the cursor in the right place, there is no such thing 16) I would also like to have a custom auto-brightness and the ability to make the minimum level of the backlight darker - it cuts the eyes at night 17) when cleaning the cache and dalwick cache flies wallpaper - a trifle, but unpleasant 18) for some reason, when I turn on, an android always appears and writes "application launch", approximately the same window is displayed when updating the firmware (optimization of applications, then their launch) 19) for a very long time, the power menu opened (well, the fact that by long pressing the power button), now after changing the theme and returning to the standard, it seems to be normal This all concerns miui 3.10.18. When installing 3.10.25, for some reason, I had all the applications collapsed and it was impossible to do anything — rolled back. The new version has not tried yet. -------------------- LG GT540 (CM7) ->Acer S100 (MIUI) ->LG P920 (CM10) ->Motorola MB860 (MIUI) ->Prestigio 5044 (MIUI) ->Doogee X5 pro (AOSP6.0) ->XIaomi RN3PP (AOSP8.1) ->Asus MaxProM1 (AOSP9.0) |
Message#50 04.11.13, 12:22 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | fm_patch.zip(976.47 KB) patch on the radio, put through the recovery, try. I took from the stock firmware. syaupin, I'm running away now, I will answer later, but part of the feature is miui, part of the feature of two sims (we also have it on the drain), part is fixed, and part is not :) then I will answer for each item. Post has been editeddwalx - 04.11.13, 12:23 -------------------- TRUST NO ONE |
Message#51 04.11.13, 13:07 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1184 Check in: 11.12.09 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 212 | dwalx so the radio works, but I would still like the Muev application) -------------------- LG GT540 (CM7) ->Acer S100 (MIUI) ->LG P920 (CM10) ->Motorola MB860 (MIUI) ->Prestigio 5044 (MIUI) ->Doogee X5 pro (AOSP6.0) ->XIaomi RN3PP (AOSP8.1) ->Asus MaxProM1 (AOSP9.0) |
Message#52 04.11.13, 16:48 | |
It's okay [offline] Group: Friendssavagemessiahzine.com Messages 2181 Check in: 26.09.12 Xiaomi Mi 6 6/64 Reputation: 356 | I haven’t been sitting on that version for a long time, but: - The joke with shutting down the screen when closing the book works even from version 3.10.25 (very happy about it) - The Internet was not systematically turned off when restarting (it did not figure out why) - Applications have never crashed, so as not to set. - Reset label positions from a slave. I noticed the table only when updating the firmware version (flashing) - with an "emergency call", the issue is solved by changing the blocking theme (even though there can be a dragon, and the call button disappears) - There is no constant update dalvic cache (application optimization). Only after flashing. - Switching tracks with no buttons, but almost all themes have control on the lock screen. (on the standard, you need to quickly press the circle twice. It even controls the VC.) Post has been editedS_as - 04.11.13, 16:50 |
Message#53 04.11.13, 18:28 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | 1) the shutdown of the screen does not work with a cover-cover (in the topic it seems to have written how to fix it) 2) bad "indication" - it has already been written, it is unlikely that it will be possible to fix it somehow, I think it’s in the core 3) make a limit on the time of the backlight on the locked screen (I usually have 10 minutes of backlight duration, and here comes an SMS, the screen lights up and these 10 minutes are lit. On my motorola, I have 15-30 seconds later with the same settings) 4) to remove the "emergency call" from the lock screen 5) notices that "Sim 2 is not found" fall out, would remove 6) sometimes the Internet falls off when you reboot (it simply turns off, you need to re-enable it through the curtain) 7) terrible brakes when sending / receiving mms pictures, with the text does not seem to lag. But it's like on all miui, I do not know 8) radio - it has already been written: everything seems to be working, but there is no sound (the recording also crashes) 9) applications (opera, navigator) periodically crash. but overall it seems to be stable, only one reboot was 10) Camera - video shoots just disgusting. I did not shoot on the drain, but when I looked at the reviews before the purchase, they said that it shoots well, even the stereo sound records 11) video plays poorly through the flash player, well now most sites on html5 have switched, but not all. in the same filmix it is impossible to watch a movie 12) programs installed on a USB flash drive when rebooting from folders on the desktop are removed, as if re-installed 13) there is no possibility to switch the player tracks by long holding the volume buttons when the screen is off (there was a goto on google - it is written that you need to edit the framework / androidpolicy.jar) 14) as it was already written, it would remove the MiSound item in the sound settings 15) I used to have a magnifying glass on myui when I entered text when moving the cursor and it was convenient to place the cursor in the right place, there is no such thing 16) I would also like to have a custom auto-brightness and the ability to make the minimum level of the backlight darker - it cuts the eyes at night 17) when cleaning the cache and dalwick cache flies wallpaper - a trifle, but unpleasant 18) for some reason, when I turn on, an android always appears and writes "application launch", approximately the same window is displayed when updating the firmware (optimization of applications, then their launch) 19) for a very long time, the power menu opened (well, the fact that by long pressing the power button), now after changing the theme and returning to the standard, it seems to be normal 1. as already noted since 3.10.25 done 2. look for third-party programs. there are a few here on the forum 3. Messages - Menu - Settings - Turn on the screen. With incoming SMS will not turn on the screen. 4. another Lok screen to use, this is native, so conceived by the creators of miui 5. It’s probably easier to stick a second one that you don’t need. 6. this is what ... on some ports it is turned on when restarting, that's what really infuriated. 7. Mms did not try during the time of owning the phone :) a useless thing when there is whatsapp and analogues. but apparently reconcile 8. radio fixed. standard radio miui doesn't work for anyone at all, so the main thing that has worked at all :) 9. Nothing crashes. all that should work is stable. 10. I can’t say anything here, especially since you didn’t compare it with the drain. it will be possible to try to change another from your phone 11. Well, it's still easier here, officially the flash is not supported on Android 4.1 and above. 12. There is such a garbage. Transfer applications to the phone’s memory with any program 13. WSM Tools and the appropriate module will help :) 14. In the new 3.11.1 version it is not 15. settings - special features - gestures to increase - is it not that? 16. everything is as in stock. 17. Yes, there is, but why clean the dalwick all the time? I installed the firmware once a week and live in peace :) 18. There is something for you. Of course wipe data will save, but try to figure out what is updated at startup. 19. Does this matter matter? Post has been editeddwalx - 04.11.13, 18:28 -------------------- TRUST NO ONE |
Message#54 04.11.13, 19:00 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1184 Check in: 11.12.09 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 212 | dwalx 2. I know about the programs, and use LightFlow, I mean, the red LED only works when charging is connected for some reason 3. No, I just need the screen to turn on, but it does not burn all the time, but only 15 seconds. Even with a banal reboot, if the phone is not touched from the moment it is turned on, the screen will still light up 4. I will not argue, I will look for Lockscreen with Miui 4 (I really liked it, more than 5th) 10. It may not be necessary here, I remember once digging back in LG, there is some xml in system / etc with media settings (and cameras as well), where profiles for quality “good,” excellent "etc. with the indication of codecs, bit rate, fps, frequency for sound, the number of recording channels (well, stereo - 2 means). but I don’t remember the name, maybe I’ll just have to take it from the stock, there is a similar media_codecs.xml file in miui, but this is not the case. there seems to be something media_profiles.xml. Or it may even be worth returning the stock camera, although I personally don’t like it, but there will be at least a video camera. And you can gash two cameras in the firmware) 11. but nevertheless everything works on xiaomi mi2 12. And so the memory of 100 MB is left, not deadly, it just infuriates a little 13. 15. not that, I already looked - it was removed in the miui itself, but in vain, in my opinion 16. Yes, as in stock, but it would be great to improve! (I'm not talking about overclocking, RAM and video accelerator) 17. I clean when podlagi start; it was just a remark that was absolutely not important 18. I am now flashing 3.11.1 - everything is ok. everything starts up normally 19. Yes, I do not know what's the matter. Lags were on the drain, immediately after the firmware. then put a third-party theme, did not like it - returned the standard one and the lags ran out Post has been editedsyaupin - 04.11.13, 19:15 -------------------- LG GT540 (CM7) ->Acer S100 (MIUI) ->LG P920 (CM10) ->Motorola MB860 (MIUI) ->Prestigio 5044 (MIUI) ->Doogee X5 pro (AOSP6.0) ->XIaomi RN3PP (AOSP8.1) ->Asus MaxProM1 (AOSP9.0) |
Message#55 04.11.13, 19:16 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 241 Check in: 30.09.12 Lenovo A5000 Reputation: 49 | patch on the radio, put through the recovery, try. I took from the stock firmware. The patch is greasy, just replace \ system \ lib \ modules \ mtk_fm_drv.ko. It worked for me Another inconvenience: after a reboot, the sound of the screen lock and vibro on touch is restored in the settings. And so very good! -------------------- Prestigio MultiPhone PAP5044DUO, Lenovo A5000 |
Message#56 04.11.13, 19:19 | |
THEY'RE WATCHING [offline] Group: Friendssavagemessiahzine.com Messages 539 Check in: 27.08.11 Xiaomi Mi 5S 4/128 Reputation: 368 | 11. There, in general, everything works in MIUI :) 12. And I made myself redesigning. right here:Explay HD Quad - Discussion (Post # 26141015) The patch is greasy, just replace \ system \ lib \ modules \ mtk_fm_drv.ko. But it’s hard to change randomly without a phone :) Post has been editeddwalx - 04.11.13, 19:20 -------------------- TRUST NO ONE |
Message#57 06.11.13, 12:43 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 255 Check in: 01.01.13 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 208 | |
Message#58 06.11.13, 18:38 | |
Novice [offline] Group: Active users Messages 37 Check in: 06.11.13 Prestigio MultiPhone 5044 DUO Reputation: 1 | Please, if possible Add Hungarian language support for the next version! Is there an official translator for the project (name: Vagyula) so there is a constant update Sorry for google translate! Bye: Bélabá -------------------- Device: Prestigio MultiPhone 5044 DUO (PAP5044) ROM: PureXperia Z2 v4.3.5. for PAP5044 by anatoli621 |
Message#59 06.11.13, 21:00 | |
It's okay [offline] Group: Friendssavagemessiahzine.com Messages 2181 Check in: 26.09.12 Xiaomi Mi 6 6/64 Reputation: 356 | |
Message#60 06.11.13, 21:21 | |
Novice [offline] Group: Active users Messages 37 Check in: 06.11.13 Prestigio MultiPhone 5044 DUO Reputation: 1 | Thanks for the quick comment ... Hope I am good to translate your comment ... I would like MIUI support for the Hungarian language. In the latest version (3.11.1.) I use wich, not included in the Hungarian language. Vagyula is an official translator, and its latest version contains updated translations. ->Http://www.arzo.hu/vagyula/deodexed_FCR_MIUI_R28.0%20HU.zip (3.11.1 developer ROM base for Xiaomi Mi2 / sec.) Information and helps: https://www.facebook.com/miuihu?fref=ts http://xiaomi.eu/community/members/vagyula.40920/ http://xiaomi.eu/community/threads/miui-mu...g-3-11-1.22603/ http://crowdin.net/project/miui-rom-translation/hu Sorry I'm new to Android, and these amateur ones Bye: Bélabá Post has been editedBélabá_Hungary - 06.11.13, 21:44 -------------------- Device: Prestigio MultiPhone 5044 DUO (PAP5044) ROM: PureXperia Z2 v4.3.5. for PAP5044 by anatoli621 |
Message#61 06.11.13, 22:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 255 Check in: 01.01.13 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 208 | Question: Will there be support for MIUI, and if so, when to wait (now there is a port miui 3.11.1, it works amazingly). Answer: Good afternoon, no, we do not support third-party firmware. We also remind you that we are not responsible for the operation of the devices on which third-party firmware was installed, and also about the fact that users who installed third-party firmware lose their software warranty and will not be able to correctly install our updates on the device. -------------------- Redmi Note 4X Qualcomm Snapdragon 625+ MiuiPro 8.7.19 |
mobile version | Now: 05/20/19, 01:53 |