[X]Assistant

[hollydenis]

Prestigio MultiPhone 5044 DUO - Firmware
PAP 5044 Duo
Description | Discussion пїЅ| Firmware

Drivers and Utilities

Drivers

//savagemessiahzine.com/forum/dl/post/3374480/MT65xx_USB_Driver.zip
//savagemessiahzine.com/forum/dl/post/3374482/GN_MTK_USBDriver%28Factory%29_V1.1.0_1.rar
All drivers together, plus Adb Driver Installer:
All in one
Driver to make our device USB WIFI modem Cn SW.egorka_kiev

Firmware

SP Flash Tool

Official firmware

Flash Tool Firmware

Full firmware dump 1.0.49
Firmware 1.0.21
Firmware 1.0.31 - this is a firmware dump(Merged via flash from the phone version. There are no special changes).
I advise you to read before installinghere is this post Takenfrom here Thank uv.sku11man
Firmware 1.0.29- assembled, but proven.Thank uv.DarkZombi
Firmware 1.0.42- collected.Thank uv.DarkZombi

OTA firmware (updates)

This is an OTA update
(flies by "air")

Firmware 1.0.29
Firmware 1.0.42The link name indicates which firmware version to install the update on.
from v.1.0.29 to v.1.0.42
from v.1.0.31 to v.1.0.42
Firmware 1.0.45
Update from 1.0.42 to 1.0.45 Stock

Files to restore (under CWM)

There will be laid out various firmware / firmware elements needed to restore the phone. To use them you needcustom recovery
Net 1.0.29 on Yandex.Disk Thank uv.Dimak.74

Official firmware backups

Firmware 1.0.21
Firmware 1.0.29
Thank uv.-baw-

Firmware elements

Corefrom firmware 1.0.21
Modem (radio module)from firmware 1.0.21
Modem (radio module)from firmware 1.0.29Cn SW.DarkZombi
Libycameras.(Put on any firmware) Cn SW.DarkZombi

Unofficial firmware

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ download

Lite Stock Mod PAP5044 1.0.47

Fast

1.0.47

Firmware StockMod1.0.47 for mod. recovery
Fast with description and screenshots
from uvanatoli621

Light Rom v.2

"- Deodex firmware based on our 1.0.42
- Root, BusyBox are built the freshest (including binaries)
- System applications passed alignment (it is zipaling)
- When installing the firmware installed Carvil Touch Recovery 2.2
- Cleaned up all sorts of MTK widgets and applications, for the replacement of which added below listed ...
- Home screen from 4.4 "...
Some applications were removed, new ones were added in their place ... The whole emphasis on changes was made on patches ...
These, more detailed explanation and screenshots arehere
Downloadwith google disk

Full version PAP5044 Odex and Deodex 1.0.42 / 1.0.45

Firmware compiled for CWM from pristine runoff 1.0.42. From differences from the original - added ROOT. There are Odex and Deodex versions.
DownloadOdex version
Downloadupdate to 1.0.45
DownloadDeOdex version
Downloadupdate to 1.0.45
Hereoriginal post
Thank uv.anatoli621

Odex.original rom 1.0.42

Firmware on the basis of. stock 1.0.42:
"Built - init.d, nano, bash, SuperSU, busybox.
...
Modified-Deleted - Removed ads at startup (navitel navigator), deleted files that hit custom recovery, removed two applications - Game Live, and the game from Prestigio, updated all Google applications (removed a bunch of junk), all Google applications moved to the Data section (except the market) , the hardest - the desktop wallpaper was changed :)) "
Before installing, please read the originalby fasting
Download fromMail.ru
Cn SW.DarkZombi

Lite Deodex v1.0.42 for PAP5044

Description

Deodexed and slightly cleaned firmware 1.0.42. There is a root. Removed the reader, office, installer, toy, etc. Added: Weather widget and ES Explorer. ...

Downloadwith Yandex.Disk
Hereoriginal post patches
Thank uv.anatoli621

Original Rom 1.0.31

Version 1.0.31 was not (and will not be) available for download and installation as an OTA update!

Description

Firmware in zip format, installation through recovery (CWM)
The firmware is fully consistent with the original.
What added, changed-SuperSu, BusyBox, nano, init.d, deodex, automatic zipalign with firmware.
Firmware easily supports memory markup, and further changes.
Tested, everything is OK.

Downloadwith Yandex.Disk
HereThe original post, where there are several screenshots and detailed installation instructions.
Firmware lined uv.DarkZombi

Original Rom 1.0.29

Description

Firmware in zip format, for installation via CWM (recovery)
Not what was not removed, did not change, all as in the original firmware 1.0.29
Added SuperUser, BusyBoox, made deodex, zipaling
(firmware specifically designed for memory markup, and further development)

Downloadwith Yandex.Disk
HereThe original post, where there are several screenshots and detailed installation instructions.
Firmware lined uv.DarkZombi

Stock ROM 1.0.29

Firmware laid out by uv.DarkZombi

Firmware description

This is stock (standard) firmware, version 1.0.29
Firmware fully deodexed (deodex), carried out by zipalign
Established:
root rights (SuperSU), busybox, Apex launcher, OG Battery MOD changing the battery.
Removed unnecessary, butanimation
Instead of the standard ANDROID screensaver, now Prestigio 5044, sounds to turn on, turn off now Hi, Bye as in Windows7
Corrected the version of android from 4.2.1 to 4.2.2

Hereoriginal post and screenshots.
Download from Yandex.Disk

Light rom

Firmware description

The firmware is based on Stock Rom, but:
Cleaned up trash, replaced the shell, added new applications and Xposed kitchen. Also attached is an App Pack, which contains probably the best applications.
In general, for those who love stock and no timeto suffer.

Heredetailed description, screenshots and tips
Download Rom from Yandex.Disk
Download App Pack from Yandex.Disk

MIUI

Catalog of topics for MIUIv5

Fast

Regarding the possibility of upgrades toMIUI v6

Fastwith info

How to login to your XIAOMI account

How to login to your XIAOMI account
Fast with instruction

What is MIUI

This is the firmware compiled on the Android source, but with:
Fully redesigned interface
Built-in installation of themes for the system
Improved standard applications
Increased productivity
and much more ...

14 MIUI chips

1. To take a screenshot - press the power button and the volume - simultaneously, the file will be saved to / DCIM / Screenshots
2. To turn on the flashlight on the lock screen, press and hold the "House" to fix the light - hold it longer. Disconnect - press the power button.
3. On the lock screen, double-click on the lock icon so that the player control buttons appear.
4. Tap and hold the house on the main screen to display the regular taskkiller.
The bottom button can kill all current processes.
To kill a single process, you need to swipe it up from the list of applications.
So that the process is not killed by the Taskscaler, you need to lock it down for the Taskler with a swipe down.
5. You can terminate calls with the power button to activate it go to settings>Specialist. features and turn on the option Power button ends the call
6. You can nail the current application by long pressing "Back" to turn it on - go to settings - keys.
7. Pressing simultaneously Volume + and back unlocks the phone (if suddenly you do not understand how unlocking works in a new topic)
8. To temporarily set the maximum brightness of the screen - press Volume + and Menu at the same time, the brightness will remain until the lock.
9. You can turn off the melody when an incoming call is flipped through the phone (in the dialer settings) or by pressing the Volume-
10. On the lock screen, a long press "Back" will turn on the camera (Settings - Keys - Camera on the lock screen - on)
11. Pinch on the desktop will put you into edit mode.
12. Icons are located at random? Turn on the edit mode and shake the phone three times, the icons will disappear :)
13. Customize the switches by clicking on “More” in the switch panel, you can drag them in the order you like.
14. Tired of something hanging in notifications? To turn it off, click and hold on this notification ->User notifications.

Club firmware in our forumhere
Herecan find themes for firmware
An alternative way to install themes in small quantities ishere for the way thanks uv.greeshan
HereDifferent ported applications for MIUI from different shells
HereXperia app suite ...
ScreenshotsThis firmware can be viewedhere
Herethere are gappscn SW.sku11man

Our device is not officially supported by the MIUI development team.
Assemblies for us port uv.anatoli621and uv.hollydenis. Also worked on this firmware uv.DarkZombiand uv.dwalx- We express our gratitude for the work.

MIUI RedRice

v.25

Fastwith description and screenshots
for works + uv.anatoli621

v.28

Fast with description and screenshots

V29

Fast

Mod MIUI Red Rice 30 Ru for PAP5044

Fast

MiSOUNDrom-REBORN

Fast

MisoundRom-Final

Fast

MISOUNDROM V4

Fast

MIUI Red Rice 31 mod Ru for PAP5044

Red Rice 31 Ru for PAP5044

Dwalx builds

All versions of firmware for our device arehere.

You can learn about the new firmware version, firmware properties, mods, jewelry, etc.by thispost

The new version comes out on Saturdays!

A new donor has appeared - Zopo C2.
Those who wish to test, unsubscribe in the subject please.
Build in that cloud folder, but there is a mark in the titlec2

MIUI for PAP5044

As a donor, the firmware was taken from the MIUI site, translated by jBART, cleaned. Collected on the basis of stock 1.0.42. This is a self-assembly, and not a converted firmware uv. Dwalx'a and uv. DarkZombi. When you first turn on disable data transfer via SIM card.
Originalfastwith Actual versions, explanations, screenshots and patches.
Miui for PAP5044_4.8.29 (multi language)
MIUI SE for PAP5044 (Special Edition)
Latest for MTK6589
We thank u.anatoli621

Build DarkZombi

H.DarkZombiStopped porting MIUI for our device.
Below are the latest versions made by him ...
4.2.18
4.2.23

Patches, tweaks

We put all patches through recovery (CWM) - without wipes!

-Patch keyboard from Prestigio (with firmware version 1.0.42)I.disk
-Patch for free themes (works with version MiUi 4.1.26)I.disk
-Patch camera install from LenovoI.disk
-The patch removes the Chinese market and the application "games"I.disk
-Patch adding FMradio from Lenovo, a fully working radio, even recording from the air!I.disk
PS: if it does not work, after the patch, the standard radio, then you need to remove it with pens on the system / app / path

LEWA OS v6

LeWaOS v6.0 by hollydenis

Standard version "Light" version Superlight

LeWaOS v6.0 by anatoli621

Fast with description and screenshots

LEWA OS

The firmware reminds many MIUI, but a bit different interface. Behaves fairly well. Stable.

LEWA OS - decorations(themes, icons, locks, etc.)

HereandHere.

LeWaOS5.1_stable_by-hollydenis

Fast

Complete builds from DarkZombi

SW.DarkZombiworked with Lew’s for our device. These are the three most recent builds from it:
17.01.14- The most stable.
22.02.14- Proven
07.03.14- Latest build

Patches, tweaks

We put all patches through CWM (recovery), without wipes!
-Patch keyboard from Prestigio (with firmware version 1.0.42)I.disk
-Patch installing JB_keyboard (stock clave JB)I.disk
-Patch installing SuperSu (superuser rights)I.disk
-Patch camera install from LenovoI.disk
-Patch adding FMradio from Lenovo, a fully working radio, even recording from the air!I.disk
PS.If not working, after the patch, the standard radio, then you need to remove it with pens on the system / app / path
-Patch adding Roboto font from Android 4.3 to LewaOS 5.0I.disk
- Rollback to standard fontI.Disk
-Patch adding voice search google and Viper4Android.FX (equalizer with many effects)I.Disk
Also there is darktheme

LeWa OS 5.1 For PAP5044 from SW.anatoli621

"I have long wanted to try LeWa on my smart, but since I don’t use other ports, I made my own ... The firmware weight is 251.9 MB ... Everything seems to be working ... There are no Gaps in the firmware ... Install via CWM from all wipes
Here and hereare the most current build, their detailed description, screenshots and patches.
Also in this post thereNostalgia LeWa OS dated 08/15/2013, in which there is still a menu and a lot of interests.

Outdated options / builds

A couple of the most basic builds from S_as

Version 1.11.13

Download from Yandex.Disk

Description assemblies

Be here

Cons build

LED notifications do not work, only the charging diode responds ...

Version 11/15/13

Download from Yandex.Disk
Corrected build.prop

Description assemblies

The description itself ishere
Screenshots can be viewed.here

Cons build

The Play Market does not work (you need a fixed build.prop)

MIUI Standart 2

Fast

MIUI-EXTASY

Fast

MONSTERFAT

Fast

OMG-MIUI

Fast

GK-Lollipop for PAP5044

Fast

MIUI7 for PAP5044

Fast

MIUI-ALPHA

Fast

Nokia Lumia for PAP5044

Fast

The new dawn

First version
Version 2.1

New_YunOS 3.0

Fast

MIUI Simply

Fast

ColorOS by ATs v2.6s

Fast

EternityOS VIBE UI Mod

Fast

Eternity OS final

Fast

LEWA 5.1 FINAL (STABLE)

Fast

MIUI6 for PAP5044

Fast

LegoIce_3D_UI

Fast

Port Narutofied_Stock_512 _v3.1_EN

Fast

Lg g2

Fast

YunOS 3.0

Fast

ETERNITY OS

Fast

ShenduOS

fast

MICRONOTE-V4

port

GK-Dream v.1.0

GK-Dream v.1.0 for PAP5044
Lite GK-Dream v.1.0 for PAP5044
Minor update GK-Dream v.1.1

All in One for PAP5044 V1.1

fast

HTC-MaterialMOD

HTC-MaterialMOD

MICRONOTE-V3

MICRONOTE-V3

X-TOUCH

Fast

PXZ2 + BBK

fast

BaiduOSV6

Baidu OS_v6 (67) _PAP5044
BaiduOSV6_by-hollydenis

Handos

Handos

Nextburst

Fast

MisoundROM-V2

Fast with firmware

Micronote v.2.0

Fast with firmware

MICRONOTE for PAP5044DUO

Fast with firmware

HOSP L ROM for PAP5044DUO

Fast with firmware

EmotionUI_by-hollydenis

Fast

EMUIflymeOS

Fast

VowneyPort_for5044duo

Fast with firmware

KELEos_by_hollydenis

Fast with firmware

MUSE UI 3.0

Fast with description and firmware

ZOPO C2 port

Fast with description and firmware

Ex os

Fast with description and firmware

SAMSUNG NOTE 3

Fast with description and firmware

KELE UI 1.8.7

Fast with description and screenshots

Vibe UI v.2.0

Fast with description and screenshots

Explay X-Tremer Port For PAP5044

Fast with firmware

AndroIum_3.8.0 for PAP5044

Fast with firmware

Funtouch OS for PAP5044DUO

FuntouchOS 5.10.5 Ru
FuntouchOS 5.8.2 Ru from uv anatoli621

C o l o r OS v.2.0

Color OS v.2.0 Fast with a description
thank uv.anatoli621

iPhone 5S

iPhone 5S Firmware
Fastwith a description

Acer Liquid (Android 4.2.2

Fastwith a description

Stock Acer Liquid E3

Fast

thank uv.anatoli621

Yandex.Kit For PAP5044

Working port of Yandex.Kit firmware
Everything is tied not to Google but to Yandex.

Fastwith description and screenshots

Downloadwith YandexDisk

Thank you for your work.anatoli621

HTC One M7for PAP5044

"Original -Referenceon needrom
Disadvantages: only the first sim card works.
There is a wish - we test, we share impressions about the port. "
Stock Sence with dvuhsimochnika HTC. Android 4.2.1
Fastwith description and screenshots
Downloadwith YandexDisk
Thank you for your work.anatoli621

HTC One M8for PAP5044

"Working clone HTC One M8 ... I collected the firmware from a bare clean android 4.2.1 with the port of HTC One M7. Globally changed almost all the graphics (can be seen on screenshots). New launcher from M8 ... Nice interface, new graphics, news world, social networks, etc., and the weather is always at hand on the desktop "
Fastwith descriptions and firmware originals
Originalfastwith screenshots
Downloadwith YandexDisk
Thank you for your work.anatoli621

EMOTION_UI_PAP5044

Version 2.0
Version 1.6

Baidu OS_PAP5044_v5.1

Mobile OS from the Chinese search engine Baidu (compiled on the basis of flow 1.0.42). There is a root.
Firmware for tests, everything works basically. It looks like Lewa and MIUI but with its own buns.
Translation at the level of 95%, the notification LED does not work.
Linkto the original post with information, screenshots and a full description
Downloadwith Yandex.Disk

Color_V1.6 for PAP5044

It was a free evening, finished Color_V1.6 for PAP5044.
There is a Root, a working T9, 3G for each SIM card (not verified). There are no bugs, there are those who wish - test /
Linkto the original post with information, screenshots and a full description

Downloadwith YandexDisk

ColorOs exlusiv

-15.02.14:
"I smashed the alarm clock, set the stock from JB (the alarm clock did not work with the flip closed, it works now!), Changed the radio (it became more pleasant, but does not sound to the external speaker, only works in headphones), corrected the core, added SuperSu Pro, + optimization
Built on the basis of firmware 1.0.42
This is the stock firmware of OPPO phones.
test, look around)

Shortcomings:
-Radio to external speaker (it works in headphones)
-When the body is turned off, the charging does not show the battery (the charge itself is on)

Detailed description, screenshotsHere
Download from Yandex.Disk

Viberom

Alternative firmware from Lenovo.
A lot of interesting things, but the assembly - ports: there are drawbacks.
Thank you for your work.anatoli621

Current version (v.3)
The new version of Viberom (there will be no more updates for 4.2.2), the kernel and any from the runoff 1.0.45.
Everything seems to be working, it has become even faster, better, more beautiful, etc.
There are interested - we are testing.
Install via CWM with all wipes.
When you first turn on, you do not need to choose the Russian language (everything is in Russian by default, but there is no choice in the system) just click next.
Fastwith screenshots, links and patches
Download from YandexDisk

Version 2

The main works like everything, everything in Russian.
Does not work: front camera, apparently it simply is not in the source (maybe something else, I did not have time to check everything)
Disadvantages: the internal memory is not displayed correctly (it did not figure out whether it redistributes or not, it seems to be simply not displayed correctly, but I warned that everything is at your own peril and risk).
There are willing - test. Install via CWM with all wipes.
Download from YandexDisk
Fastwith screenshots and patches

Viberom v1.0

Works main camera, flip, LED event. The main works like everything.
Does not work: front camera (maybe something else, I did not have time to check everything)
Disadvantages: internal memory is not displayed correctly (it didn’t figure out whether it redistributes or not, it’s just not displayed correctly, but I warned that everything is at your own risk and risk), not a full translation into Russian, the weather doesn’t see our cities After downloading to the desktop 2 folders in Chinese, just rename.
There are willing - test. Install via CWM with all wipes.
Download from YandexDisk
Fastwith screenshots and patches

PureXperia Z2 for PAP5044

by anatoli621

At the request of workers screwed the port to our smart.
...
Android 4.2.2 (4.4.2 - fake, for Ponto), the name of the smart in build.prop did not change, it is defined as C2305.
Multilanguage, the first start in Russian (the first download is long), is root, the gaps are built-in, everything seems to work.
Fastwith screenshots and patches
Thank uv.anatoli621
Download from YandexDisk

by vitalliybozhko

PureXperia Z2 v.4.3.5 full& litefrom xda.forum
Fastwith description and screenshots

X-Mi_UltimateFor PAP5044

"I offer for testing the firmware - a wild mixture of MIUI and Sony, well, you never know ....
Found on Ineta, ...
I did not change anything, I just adapted it to our smart, I did not particularly test for bugs.
There are willing - test. "

Download from YandexDisk

Fastwith screenshots and descriptions
Thanks for the find uv.anatoli621

Port Stock Sony XperiaC for PAP5044

The port of the clean Sony XperiaC firmware, did not delete anything, Root added.
In build.prop, the name of the body did not change, it is displayed as C2305 (Sony Xperia C).

Download from YandexDisk

Fastwith screenshots and descriptions
Thank you for your work.anatoli621

Port Sony XperiaC v2.0

How could podshamanil port Sony XperiaC.
The memory seems to have been repaired, the working flip is willing, test it.
Does not work: the illumination of the lower soft keys, the LED on the event.
I did not do a lot of screens, everything is the same as in the first, it is the same port, the current is slightly correct.
Install via CWM with all the wipes (this is the firmware, not the patch).
Fastwith screenshots and patches

Downloadwith Yandex Disk.
We thank u.anatoli621

XFlare for Prestigio 5044

Sony XPeria C firmware based firmware
Android 4.2.2, a complete set of Sony’s goodies, including a Walkman and gadgets ...

there isMinuses. Solutions for some of them and a full description with screenshots isHere
Downloadwith Yandex.Disk

ShenduOS For PAP5044

I suggest the ShenduOS firmware for tests, everything basically works.
Disadvantages: not a full translation, there are no Russian letters on the dial and in the search for contacts.
The firmware is smart, there is Root, Android 4.2.1.
Heredetailed description and screenshots.

Downloadwith Yandex.Disk
DownloadGapps

Port_Acer_For_PAP5044

The port of the stock firmware Acer V370 Liquid E2 Duo based on Android 4.2.2, it works like everything. There is a Root, a separate selection of a call melody for each SIM card. Did not delete anything. There are willing - test.
Fastwith descriptions, instructions and screenshots

Downloadwith Yandex.Disk

We thank uv for this port.anatoli621

ProjectDoge For PAP5044

I will lay out this firmware for tests (maybe someone needs it), firmware in Russian.
Full zakos under KitKat, 3D task manager, etc. A lot of things were crammed into the firmware, I didn’t delete anything, there is a root - everyone will delete the superfluous himself (which he deems necessary).

HereA detailed description of the "goodies" and screenshots.
Thank you for your work.anatoli621

Downloadwith Yandex.Disk

KENEKSI_OMEGA _Port_For_PAP5044_4.2.2

Pure (bare) Android 4.2.2, port from a KENEKSI OMEGA phone, multilanguage, first start in Russian.

Downloadwith Yandex.Disk
Topicwith description, screenshots and patches

PaperHd For PAP5044

"Deodexed and cleaned firmware based on Android 4.2.1 (base - sink 1.0.42). There is Root, Deodex, Zipalign, init.d. Separate selection of a call melody for each SIM card, a dialer with two call keys, a fast, stock launcher in landscape form, optimized. There are those who wish - test "

Fastwith instructions and screenshots

Downloadwith YandexDisk

Marsapa rom v22.1 for PAP5044

"They asked to screw the firmware to our smart -Referring to Needrom

From the original

1-deodex;
2-Zipalign;
3-busybox;
@ 4k - root;
5-Xposed framework;
6-Gravitybox;
7-dual sim ringer;
8-OgBattery;
9 direct-access mode all'engineer and factory mod settings;
10-Sony walkman player;
11-Viper4android FX
12-marine compass;
13-custom logo (thanks ramson);
14-custom bootanimation (thanks morgan7676);
15-Led notiche blue;
16-New default wallpaper.

It seems nothing so flash, there is a wish - test it. "
Linkto the original post with screenshots.

Downloadwith Yandex.Disk

We thank uv for this port.anatoli621

4.4 (fake) For PAP5044

"AnotherKitKat , in fact, it is all the same Android 4.2.1 ... There is a Root, a working T9. There are no serious bugs, there are those who wish - test "
Linkto the original post with screenshots.

Downloadwith Yandex.Disk
For Google sync to work, you need to "Download and install full gaps for 4.2.2, for examplethese"

We thank uv for this port.anatoli621

Nexus Mod For PAP5044

Pure 4.2.1
Linkto the original post with screenshots.

Downloadwith Yandex.Disk

We thank uv for this port.anatoli621

Mod S920 For PAP5044 v2

The Lenovo S920 port is a new version (the first on Lenovo's 117 firmware, this is on 121), was looking for how to make a patch, found a new mod. There are interested - we are testing.
HereDescription, screenshots and patches

Downloadwith Yandex.Disk

We thank uv for this port.anatoli621

Mod S920 For PAP5044

This is not the firmware from Dimak.74, it is a completely different port of the Lenovo s920 firmware.
There are no problems with the processor.
When you first boot, GPS and data transfer via a SIM card is turned on - turn off immediately after downloading a smart card.

Detailed description of goodies, screenshots, patches areHere
We thank uv for this port.anatoli621

Downloadwith Yandex.Disk

port with Lenovo s920

Lenovo s920 clean drain port. "Changed: Added root, icon of the engineering menu, deodexed, a bit of optimization ...."
Full description with screenshotsHere

Download from Yandex.Disk

Thank uv.Dimak.74

Port Zopo For PAP5044

The firmware port from the Zopo phone for our smart (compiled based on the stock v. 1.0.42), works like everything, the firmware is lively and with a lot of buns. There are willing - test.

Downloadwith YandexDisk
Fastwith the original description of snacks (there are a lot of them), screenshots and patches.

We thank uv for this port.anatoli621

SGS5 For PAP5044

Original -Needrom
Firmware for tests, it works like everything.
Android 4.2.2 (4.4.2 - fake), in build.prop the name of the smart did not change.
Disadvantages: incomplete translation.
Fastwith the original description, screenshots.

Downloadwith YandexDisk

We thank uv for this port.anatoli621

SAMSUNG NOTE 3 For PAP5044

Another variation on the theme of SAMSUNG.
It works like everything.
Disadvantages: incomplete translation, no Russian letters on the dialer.
Fastwith the original description, screenshots and patches.

Downloadwith YandexDisk

We thank uv for this port.anatoli621

S4_fix

"This firmware is similar to Samsung Galaxy S4 ...
-Collected from android 4.2.1 (1.0.42), 4.2.2, 4.2.3 (S4) ...
-In the firmware is not a full translation into Russian, approximately translated to 97% ...
“The only thing that doesn't work is the radio through an external speaker ..."In the post indicated an alternative solution

Download from Yandex.Disk
Fastwith a detailed description, instructions and screenshots.Thank uv.DarkZombi

Prestigio TouchWiz

Android 4.2.2
Added system tweaks and init.d scripts.
Also, the firmware is Aroma Instaler, with which you can choose a modem, launcher and various software for installation
LinkMail.ru cloud builds
Fastwith a full description and several screenshots.

Note3 For PAP5044

"Firmware based on Android 4.2.2, first start in Russian (multilanguage), there is Root, there is support for init.d (there are no scripts in the firmware, there is a stub), a working Russian T9. Still need to work with the firmware (the main thing works), but there is no time (and desires), there are those who wish to help in the finalization of this port - you are welcome. I did it first of all for myself, there are those who want to test it. I do not plan any improvements and patches yet, like other ports, use one or the other for your choice. "
Originalfastwith screenshots, instructions.Thank uv.anatoli621
Download from Yandex.Disk

Port Philips For PAP5044

"The Philips firmware port for our smart (compiled on the basis of stock v. 1.0.42), everything seems to work. I did everything for myself, there are those who want to - test it"
Fastwith a detailed description of goodies, instructions and screenshots.Thank uv.anatoli621
Download from Yandex.Disk

YunOS_V2.7 (Aliyun OS) TEST

For tests (familiarization) firmware YunOSin English(from time to time it skips Chinese).
Asked - get - test.
Fastwith original description and screenshots.
Redone uv.anatoli621

Download from Yandex.Disk

CyanogenMod 10.2 For PAP5044 (TEST)

"A half-worker CyanogenMod 10.2 (Android 4.3 !!!) for MT6589 has appeared.
Who does not know - a month ago, CyanogenMod 10.2 did not even start on our process
...
Does not work: camera, auto brightness, external speaker, sim2, gps, bluetooth, radio (wrote from memory, maybe not all remembered).
Only for tests, do not write what needs to be fixed, everything that works is all that can be run on our core.
Maybe someone else that will improve the thread, I did not succeed "
The firstandSecondposts with descriptions
Download from Yandex.Disk
Thank uv.anatoli621

Custom recovery

What it is

Custom Recovery is a utility that is required for:
- Create a full backup of the OS (firmware) of your phone.
- Firmware unofficial mods, custom firmware.
Also, with the help of recovery, you can do a full reset, format the device memory sections and a USB flash drive, and also make partitions on a Lunix flash drive.
There are several types of castes. recovery: CWM Recovery (ClockWorkMod recovery), TWRP, etc. The most common is CWM (it is simpler and clearer than anyone else)
Moving through items of custom recovery is done:
"Volume +" - item up
"Volume -" - item down
"CL. ON." - item selection

DingDong Recovery

DingDong Recovery
Fast with info. Thank uv. anatoli621

Philz Touch Recovery 6.43.8

Fast

Carliv Full Touch Recovery

CarlivTouch-recovery-2.7
Fast with info
Carliv Full Touch Recovery
Fast with info. Thank uv. anatoli621

CWM

Version 5.5.0.4

There is no touch control, the most stable and bug-free version.Thank uv. -baw-
Recovery

Version 6.0.40

Recovery
In this version there is Aroma File Manager.
To make it work you need to download this one.archive. unpack it and put the clockworkmod folder on the SD card.
To enter it you need to select Carliv in the recovery, and then Aroma File manager.

Thank uv.dwalx

Version 6.0.4.4

Image Recovery v.2.2 for installation via Mob. Uncle.Thank uv.seregar
Image Recovery v.2.1from uvseregar
Image Recovery v.2 for installation via Mob. Uncle.
Archive with v.2 to install (update) through the recovery.
Wayinstallation using a PC, based on the system files in the phone (ensures operability)
This version also has Aroma File Manager.
To make it work you need to download this one.archive. unpack it and put the clockworkmod folder on the SD card.
To enter it you need to select Carliv in the recovery, and then Aroma File manager.

CWM 6.0.3.4

I suggest for tests CWM 6.0.3.4 recovery.
This is a button recovery, not a touch.
Formfor installation via mobile uncle(unpack the archive and rename CWM 6.0.3.4.img to recovery.img)
image + scatterfor installation via SP Flash Tool
Thank uv.anatoli621

TWRP

TWRP 2.6.3.0
Fastwith info. Thank uv.anatoli621
Theme and AROMA File Managerfor this version of recovery.Fastwith explanations and screenshots.Thank uv.seregar
TWRP 2.5.0.0Slightly tweaked uv.seregar
TWRP 2.5.0.0for our device.Thank uv.dwalx
Themes for this recovery (v. 2.5.0.0) arehere + a couple more + here is fully working

MIUI Recovery for PAP5044

Fast

Instructions

Memory remapping

Fast

Device recovery

Fast

Instructions for increasing the volume through the engineer

Link to post with instructions

DOLBY SOUND for any firmware

How to add DOLBY sound to any firmware
Instruction from uv anatoli621 Video

How to make a full firmware dump

Instruction
I can add to it that the drivers and the Flash Tool can be taken from our header - theyexactlywork with our phone.

How to make a backup (Backup)

Backup, also called "Backup", is a complete copy of your phone's OS. The so-called "Backup". It includes all the settings, data and applications that were at the time of saving.
The amount of free space to save is desirable to have about 1.5 GB
To make Backup you need:
- Enter custom recovery,
- Select the item "Backup and Restore"
- Click the item "Backup"if you want to save a copy of the system to a USB flash drive
Click "Backup to internal sd"if you want to save backup to your phone

To restore Backup you need:
- Enter custom recovery,
- Select the item "Backup and Restore"
- Click the item "Restore" or "Restore to internal sd", depending on where the backup is located.

How to save / restore IMEI

1 way (save the entire section NVRAM)

Need a custom recovery

Heredetailed instructions

2 way

ROOT required
What is IMEI? - These are very important system data, without which SIM cards will not work on the phone, and therefore there is no mobile network and no 3G Internet.

To save IMEI you need:
- Get ROOT rights
- Download and installthisthe program
- Allow its root access
- Go to the item "Save and restore IMEI "
- Choose one of two options for saving (at your discretion)

To restore IMEI you need:
- Have a copy of IMEI
- Enter the Mobile Uncle (this is how we call this program)
- Go to the item "Save and restore IMEI "
- Choose your backup: "Recover IMEI from ..."

Alternative recovery method

Not verified!
1- On the phone dial * # * # 3646633 # * # * - after dialing the last asterisk you will immediately get into the engineering menu
2- Under the "Connections" tab, select CDS Information ("information CDS")
3- Choose Radio Information
4- Choose Phone1 (for the first imei)
5- at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.7," "(where in" "enter IMEI 1 sim) (should look like AT + EGMR = 1.7, "xxxxxxxxxxxxx" (xxxx is your imei)
6- click send command
7- should see the message "sent to mSend".
8-Then go back and select “Phone2”
9-at the top of the command line, which starts with “AT +”, delete +, then set + and select “AT + EGMR = 1.10,” "(where in" "enter IMEI 2 sim)
10-click send command, we reboot the phone
11-Dial * # 06 #, in order to check your IMEI.

Took from the next branchFly vistaThanks for the instruction_H0LL0W_

How to set permissions (permissions) with letter G

If you have a ROOT and want to replace any system files,
After the usual movement using any file manager (root explorer, x-plore, etc. with root access), you need to long click on the moved file, in the "permissions" section check the boxes
Sample
Then you need to restart the device ...

How to save installed applications and their settings

1 way (Titanium Backup)

ROOT required
Titanium Backup is a program that allows you to save all your applications, contacts, sms and mms, system and application settings, game progress, etc. in the phone's memory or on removable media (in the settings of the program, the item "path to the folder with backup copies").
To restore applications in case of system failure, flashing, the appearance of a new device, it will be enough (if you have root rights of course) install the program and specify the path to the backup folder.

P.S. PRO version of the program allows you to do mass save / restore: for example, "All system applications", "Update existing RK" etc.

Theme of the program

2 way (Helium)

This program will allow you to save applications without using ROOT, but you need a computer
Install Helium:

Install Helium on Android
Install and run Helium Desktop
Windows users must install ADB drivers for their device
Connect Android device to computer
Helium on Android is activated and ready to go.
Theme of the program- there you can find everything you need to work with it, including the premium version.

Instructions for installing / updating the official firmware

Installing official firmware via Flash Tool

Before flashing via Flash Tool
highly recommend to keepIMEI

1. Unpack the archives of the SP Flash Tool and firmware.
It is desirable that the path to the firmware was not long and did not contain Russian characters.
2. Turn off the smartphone. The cable is not connected to the computer.
3. Take out the battery.
(You can insert, if you do not have time to update the driver - taking out, inserting - taking out akb can be repeated until the result - installing drivers).
4. Download drivers, unpack. We connect the phone to the computer with a cable. The operating system will find a new device - specify the folder with the driver for your OS version. You can try to connect with the Volume + key held down.
Check in the task manager whether the drivers are installed
(Whether the device is defined in the device manager).
5. Disconnect the smartphone from the computer.
6. Insert the battery.
7. Run the program Flash_tool.exe.
8. Push the button Scatter-loading and select the file MT6589_Android_scatter_emmc.txt (it lies in the folder with the firmware).
9. Push button Download . (Upgrade sometimes helps).
10. We connect the phone to the computer with a cable. The program should see it and start the firmware.
If the phone is not found, then disconnect it from the computers, remove and insert the battery and reconnect to the computer.
11. After the end of the firmware disconnect the phone from the computer.
12. Is done

Official firmware update (OTA update or update by air)

The main thing for a successful OTA update

- more than 200MB free space on the SD card,
- the presence of stock firmware on the device,
- unmodified recovery,
- not changed system utilities,
- not modified sections,
- battery charge more than 30%.

OTA update

If the phone has access to the Internet, an alert about the system update should come. You will be given a choice: install or not.
Select "update" and the phone will do everything.
If the notification does not come, then go to "Settings" - "About phone" and find the item "System Update" there. When checking for updates, an update will be found and suggested.
If it does not work out this way, then you can use the following method.

Update through recovery

- First you need to download the firmware archive
- Unpack and copy to the root of the SD cardupdate.zip
- Reboot tostock recovery
- Select item "Install Update.zip "
If nothing happens - do it in stock recovery "wipe data "and" wipe cash "(installed programs and personal data will be erased).
- Select item "Reboot system now "after a successful update.

How to install custom (unofficial) firmware

- It is necessary to install custom recovery
- Make Backup
- Download archive with firmware
- Copy the archive to the root of the memory card
- Make a full reset via recovery:
Wipe Data / Factory reset
Wipe Cashe
in the "Mount and Storage" make Format system
- In the install zip point, select the item "choose zip from sdcard"
- Select archive with firmware
- Select the item "Yes"
- After the end of the firmware, click "Go back"
- Select "Reboot system Now"
- Wait until the phone turns on.

Instructions on firmware with full cleaning from uv.DarkZombi

1) We go in recovery, we do wipe (wipe)
wipe data / factory reset - Removes sections data, system, sd-ext
wipe cache partition - Removes cache
go to "advanced"
wipe Dalvik Cache - Removes Dalvik Cache
wipe Battery Stats - Removes a file that collects information about the battery
go go Back, then mounts and storage
format / data - deletes the Data section
format / system -Removes the System section.
format / cache - Removes cache
format / emmc - removes everything from the internal storage of the phone
format / sdcard - removes everything from the memory card
format / sd-ext - removes everything from the sd-ext section (by default, there is no separate topic in this section; there is a separate topic for this section)
I do all the wipes and formats to make sure that I didn’t care about the old firmware (wip'y have to do it, format at its discretion)
2) Install the firmware (the firmware should be in the .zip format - example proshuvka.zip)
We connect the phone to usb, to the computer, in the recovery we go to the "Mount and Storage" section
Further "mount usb storege", and so on the computer we already have the downloaded firmware, we throw in the memory card (which has already been highlighted)
firmware downloaded, click in the recovery "unmount", "Go Back", "Go Back"
go to install zip from sdcard
Choose
choose zip from sdcard - This is if the firmware is in the memory card.
choose zip from internal sdcard - This is if the penetration in the internal memory (emmc)
Click on our firmware, an example of "install proshuvka.zip, installation went, after clicking" Go back ", and" reboot system now ".
All phone reflash, wait 5-15 minutes, and rejoice)

P.S. When updating the firmware It is necessary to do all the points, with the exception of the item related to a full reset.

How to reboot into recovery

Turn off the phone,
Press and hold the "Volume +" button
Press the "ON" key
Wait for the screen to turn on. Then release the keys.

How to install custom recovery

Easy way (if the phone is operational)

Need ROOT
To install you need:
- Install the program in Russian called"Mobile uncle"
- Install it. Launch and allow it ROOT access
- Download the desired recovery image
- Put an image with a name like "recoveryXXX.img" in the root of the memory card (better than a flash drive)
- In the point of the program "Recovery Recovery" choose an image and confirm your choice.

Installation instructions only CWM via SP Flash Tool

Hereeverything is described in detail.

How to install CWM 6.0.4.4 using a computer (the most bug-free)

Heredescribes how to install using a PC, based on the system files in the phone (ensures operability)

How to make a full reset (Factory reset)?

1 way )
- Go to "Settings"
- Find the item "Restore and reset"
- Select the item "reset data"
2 way ) (through recovery)
- Need to go to the recovery
- Select "Wipe Data / Factory Reset"

P.S. When flashing to a new ROM, it is recommended to format the "System" section.
To do this, you need to enter the "Mount and Storage" item in the recovery and select the "Format system"

Detailed description of recovery points

Here are the main points of custom recovery. Those that are in any of them, which have to use most often.

for CWM

"go Back" - go to the previous settings level.

wipe data / factory reset - Removes sections data, system, sd-ext(The most powerful cure for problems. Removes all user applications and settings)
wipe cache partition - Removes cache

In the section "Backup and Restore"
Backup - complete system saving on a USB flash drive
Restore - restore backup from a flash drive
Backup to internal Sd - full system save to phone
Restore to internal Sd - restore backup from phone’s memory
Advanced Restore / Backup (to internal Sd) - selective backup / restore from the corresponding directory.

In the "Advanced" section
wipe Dalvik Cache - Removes Dalvik Cache
wipe Battery Stats - Removes a file that collects information about the battery

In the "Mount and Storage" section
format / data - deletes the Data section
format / system -Removes the System section.
format / cache - Removes cache
format / emmc - removes everything from the internal storage of the phone
format / sdcard - removes everything from the memory card
format / sd-ext - removes everything from the sd-ext section (by default this section is not on the phone, there is a separate topic for this section)
If the phone is already loaded into the recovery, but you still need to transfer something to the device, then:
- We connect the phone using USB to the computer,
- In the "Mount and Storage" section, select "mount usb storege" (the computer will see the phone and flash drive in drive mode)
- Throws everything you need.
- Click in the recovery unmount (phone disconnect from the computer)
- Click "Go Back"

install zip from sdcard - the menu of files to install
choose zip from sdcard - select installers with external microSd
choose zip from internal sdcard — select installers from the device’s memory.

for TWRP

"go Back" - go to the previous settings level.

In the "Wipe" section
There are two points:
Advanced wipe
Here you can select the items you want to clear.
Dalvik Cache - Removes Dalvik Cache
cache - Removes cache
data - Removes the Data section
internal storage - removes everything from the memory card
system - Removes the System partition.
preload - Removes everything from the preload section (by default this section is not on the phone, there is a separate topic for this section)
External SD-card - removes everything from an external memory card
and
Format data - clear all applications, backups and files on the internal memory card

If you don’t touch anything and just hold the slider, then all applications and settings will be deleted.


Backup - full system save
Restore - restore backup

In the "Advanced" section
File manager - file manager

In the "Mount" section
If the phone is already loaded into the recovery, but you still need to transfer something to the device, then:
- We connect the phone using USB to the computer,
- In the "Mount" section, select "mount usb storege" (the computer will see the phone and flash drive in drive mode)
- Throws everything you need.
- Click in the recovery unmount (phone disconnect from the computer)
- Click "Go Back"

Based on the instructions for the firmware with full cleaning from the SW.DarkZombi

Getting ROOT rights

What is ROOT right?

Root (from the English root - root; reads the "root"), or superuser - special account in UNIX-like systems (Android is),whose owner has the right to perform all operations without exception.

Benefits :
getting Root makes it possible to remove standard applications,
change themes and shortcuts
launch specialized applications that significantly extend the capabilities of a smartphone (usually such applications require Root rights). In addition, it is possible to change the system files (Recovery image, Bootloader, or images displayed on boot),
Install applications on a memory card or transfer the cache of programs and games to it.

disadvantages :
First of all, the device loses the warranty and in case of “something like this”, provided that you cannot roll back your “device” to the official firmware, you will have to repair it exclusively at your own expense.
For our device it will be enough to install firmware 1.0.21 via the Flash Tool to “return” the warranty.

Another important drawback is opening Root privileges implies interfering with system files and entailing the loss of the ability to be updated “over the air” (install OTA updates)

Ways to get

The easiest

The easiest way is to use the programFramaroot
You need to download this application,
Install it
2. Run, choose Superuser or SuperSU, to choose from, but better than SuperSU.
3. Zhmakaem Gimli, Sam, Frodo, Legolas, Aragorn, Gandalf, Boromir Any character you like, if available: D
4. A window popped up with a smiley :-) about successfully obtained Root rights.
5. Restart the device and enjoy: D!
6. After receiving the root rights, you can delete the Framaroot program!

The method is more complicated and you need a computer

1. Turn on the debug mode on the smartphone.
2. Download and install the driver.
3. Download//savagemessiahzine.com/forum/dl/post/3374485/mt6589_rooter.zip
4. Unpack the contents
and run from the archive run.bat
5. We use.

PAP5044DUO Recovery

NVRAM and IMEI backup recovery instructions
Recovery Guide PAP5044

miscellanea

Embellishments

Other Booth Logo

When you turn on the phone, the very first picture will be replaced with the one you put from here. To complete the effect so to speak :)
Installation via CWM on any firmware.
Standard boot logo Thank uv.sku11man
Booth-Logo MIUI Thank uv.dwalx
XPeria Booth Logo takenfrom here
Prestigio logo (alternative) takenfrom here Thank uv.Dimak.74

Another boot logo

fast

Mountain style boot logo
Another Prestigio logo from uvsku11man

Boot animations

Next for boot animation
HereThere are animations in the style of Android and CyanogenMod 3Dfrom uvseregar
HereKitKat Android style animationfrom uvq1111q
HereGoogle and Android style animationsfrom uvseregar
Selection of bootanimations from SW.anatoli621

Add-ons for firmware

Lenovo Radio

fast

Lenovo Super Camera

fast

PhilipsHeadset

Fast

Xperia-Album & Movie

Fast

Sony Xperia Z3 WALKMAN for all ports PAP5044

Fast

Mega Bright Lantern

fast

Examples of design posts with new firmware / updates

Just select the one you need from the code window and copy to the message.
Can someone come in handy :)Delete is always easier than adding.

New firmware

[SIZE = 6] [/ SIZE]<= Name of firmware
[SPOIL = Features]
[/ SPOIL]
[SPOIL = Description]
[/ SPOIL]
[SPOIL = Minuses (if any)]
[/ SPOIL]
[SPOIL = Screenshots]
[/ SPOIL]
[url = ""] Download from [/ url]

Update

Update for [url = ""] [SIZE = 3] [/ SIZE] [/ url] [SPOIL = Changes] [/ SPOIL]
[url = ""] Download from [/ url]

Poll results

About Android L

About YunOS RUS

The choice of firmware on 04/09/14

The choice of firmware on 01/22/14

The choice of recovery February-March 14g.before the advent of TWRP 2.6.3.0

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddestroyer71 - 26.02.19, 20:19

Reason for editing: editing

[syaupin]

I tried miui. Did not like how it works. The cover-lid only turns on the screen, but does not turn it off. Errors from the very inclusion were in the settings were painted in some paragraphs. The display is the same curve as on the drain (the red LED does not work if the phone is not connected to charging). After 5 minutes, demolished.

[S_as]

Godself @ 10/21/2013, 19:46

But Mobdyad does not see me thrown into the root of the flash recovery.

Did you extract it from the archive? At the root of the flash drive should be a file with a name like "recoveryXXX.img"

[Dimak.74]

Also portrayed miui. For lack of time, he abandoned the finishing. I didn’t like the work of the permissions manager-demolished; Liby on the camera must be selected, because shooting dumb. The memory card-fixed was not displayed (framework-res \ res \ xml \ storage_list.xml). To turn off the screen when closing the cover in the framework-res \ res \ values ​​\ bools.xml rules line<bool name = "config_lidControlsSleep">false</ bool>on<bool name = "config_lidControlsSleep">true</ bool>. The inclusion of the red color in the settings also did not work. GPS did not check-demolished as unnecessary (for myself) The kernel from 29 is suitable, but something better to fix. In general, it takes time. Who wants to do something, I have to show

[Godself]

Put Miui. But the uncle still does not see the recovery of TWRP on a flash drive - I had to install cwm. As for the flash, a cute guy: happy: The sound settings and indications crash, the second Mi pin when loading the body does not ask (you have to unlock the sim card manually through the settings), one was rebooted and the battery dropped after reboot from 99% to 49% :-D And so very nothing. And gps is surprisingly accurate in determining the location - I tried using Google Maps and Navitel with the attraction disabled. In general, respect grinders, waiting for new versions;)

[dwalx]

Godself @ 10/22/2013, 9:24 PM

Sound Settings

If it's about MiSound, then yes. This reptile for some reason is not removed from the settings. I figure it out with her.

Godself @ 10/22/2013, 9:24 PM

indications are dying

here cant with her. In the next version I will drink completely. Another problem is that there is no led indicator on my body, so it’s very difficult to test.

Godself @ 10/22/2013, 9:24 PM

pin second miiki when loading the body does not ask

Alas, how to fix it, my PIN codes have long been disconnected and forgotten.

Dimak.74, based on the firmware from which device did?

[Dimak.74]

Jiayu G4 MIUIv5 3.9.29. It is necessary to edit jambs in the resources of the apk and frames. We have a device with its "character". And so nice firmware

If it's about MiSound, then yes. This reptile for some reason is not removed from the settings

You need to disassemble Settings.apk, there to clean

Post has been editedDimak.74 - 22.10.13, 20:54

[dwalx]

Dimak.74 @ 10.22.2013, 21:52

You need to disassemble Settings.apk, there to clean

yep, in audioprofile_settings.xml it sits. but deleting:

leads to FC when opening sound profile settings.

Post has been editeddwalx - 22.10.13, 20:58

[Godself]

Another thing about Miui: when connected to a computer, the flash drive mode does not work, troubles with charge detection, Inet does not turn on after the night through the curtain (while tapping the Baidu problem, helping turn on / off the flight mode), the stock launcher is poor with its childish and bulky icons and even lack of menu (exception - transparent statusbar). When installing a third-party launcher, even GravityTools (like so called), you can’t do the statusbar transparency.
As for the display, check this info (I’ve already returned to stock 21):
throw fileLEDMissedService.apk(18.94 KB)
in the system / app with the necessary rights rw - r - r-- (owner of 0-root), set it to Settings - Display Red everywhere and reboot. It should work.
And of course it’s a pity - the firmware is designed to be cool, but the performance is not so hot ... That would be Baidu who port. On Honor 1, Baidu was the coolest and most stable, and even heaped up "I can't."

[Dimak.74]

When connected to a computer, flash drive mode does not work

framework-res \ res \ xml \ storage_list.xml needs to be edited
storage_list.xml(724 bytes)

yep, in audioprofile_settings.xml it sits. but removal

I think you don’t need to touch audioprofile_settings.xml, try Settings \ res \ values ​​\ public.xml and \ Settings \ res \ values ​​\ strings.xml to pick. Or all at once. According to the names of the menu items of the settings, it is better to focus on the Russian strings.xml (values-ru folder), and then delete them in the main strings.xml and public.xml (values ​​folder). Search where else in the apk the sought-after moments dwell ... in general, you need to pick and try

Post has been editedDimak.74 - 23.10.13, 18:58

[DarkZombi]

I liked miui v5, really became the second time. And everything works for me, and gps, and usb flash drive mode, there was a problem with exshenge services (it constantly crashed), deleted the system / app folder, and all the files. checked since i don't use

Post has been editedDarkZombi - 23.10.13, 21:08

[dwalx]

The new version of MIUI 3.10.25.
Description here:Explay HD Quad - Discussion (Post # 26096824)
For your device change tezhe:

• Kernel with firmware 1.0.21
  
• Communication module with firmware 1.0.21
  

Download:
MEGA
Yandex.Disk
Yandex.Disk something sausage, because the link is still on mega.co.nz

This version has not yet been tested on this device, but it should work, since there are no differences from the past and do not forget to make backups before the firmware.

Post has been editeddwalx - 25.10.13, 14:24

Reason for editing: Added a link to Yandex.Disk

[kazantip3550]

Put, works, after rebooting, you need to lock and unlock the screen once then the lock works as it should.

[koshenskov]

MIUI 3.10.25 - and what version of Android is there?

[kazantip3550]

[quote name = 'koshenskov' date = '26 .10.2013, 14:12 'post =' 26126827 ']
MIUI 3.10.25 - and what version of Android is there? 4.2.1 JOP40D

[kazantip3550]

At 3.10.25 there were a couple of unpleasant moments of the bodies after the end of the call. The clock tightly helped to distort the battery .. and so the dream was asking.

[kazantip3550]

It seems the hangs have stopped, everything works as it should, except for the radio.

[Skipper73]

On both MIUI, laid out in the subject, I observe an incomprehensible thing - when I talk in the conversational dynamics in the background, I hear myself. Changed modem.img to modem from firmware 1.0.29 - the effect is the same. On the stock firmware there is no such thing (checked). Not critical, but annoying. Combining options in the engineering menu did not work. Spoken "SIM" in the second slot.

Post has been editedSkipper73 - 29.10.13, 13:45

[kazantip3550]

The question is, how in contacts (and not in calls) to choose the second sim?

[dwalx]

Kazantip3550 @ 10/30/2013, 01:56

The question is, how in contacts (and not in calls) to choose the second sim?

If I understood correctly, then “Settings” - “Internal Settings” - “Advanced Settings” - “SIM Management” - “Default SIM Card” - “Voice Call” - select “Always ask”.

[M1shkov]

I put TWRP recovery from the caps and tried the 6th version of CWM, but they behave strangely and very strangely, the buttons seem to be pressed, then a reset occurs and the selection bar returns to the beginning on the item and scrolls down and after 10 seconds can ask again, is it just me? firmware 1.0.29. and with cwm 5 such is not observed