[X]Assistant

[olmusi]

Thl W8S - Official (custom) firmware (OS 4.2.1)

Description | Discussion пїЅ | Firmware

Before all actions related to the firmware
I urge you to read all instructions to full enlightenment.
Remember all the actions you do consciously and the responsibility for everything lies only on you

Drivers and Utilities

Drivers ADB.rar (14.35 MB)

UniversalAdbDriverSetup6.msi(8.78 MB)

Driver ANDROID MTK.rar(4.33 MB)

MT6589 drivers.zip(402.77 KB)

SP_Flash_Tool_exe_v3.1312.0.139.zip(6.89 MB)

SP_Flash_Tool_v3.1304.0.119.zip(6.27 MB)

MtkDroidTools248.zip(8.27 MB)

USB + VCOM + Driver.zip(10.74 KB)

Alternative installation of USB driver VCOM Driver

Official firmware

Manual firmware using the SP Flash Tool.
Amendment to all the instructions for the firmware that you have read or will read: Sew the preloader and dsp_bl only if you raise a brick! In all other regular updates and flashing NEVER, do not put these checkboxes in FlashTool and DO NOT include formatting! You may have problems with which you will not cope at home or it will be difficult to do it. The mindless flashing of these sections is absolutely useless and very risky. .

W8s.JB2.FHD.EN.COM.16P256_MT6589TV1.0.3_20130815
W8s.JB2.FHD.EN.COM.16P256_MT6589TV1.0.4_20130923

Unofficial firmware

Manual firmware using Modrekoveri

SRR- Xperia ThL W8s

пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

( пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ alextu )
ThL W8S King Kong JB 4.2.1 ROM v1.0.6. (from Belyaev Anton5 firmware updated)
Minimize.Stock.for.W8s (from olmusi)
ColorOS_30.12.13 (from serdgi0)
Universal for ThL W8 with FullHD 4.2.1 dated October 16, based on the latest 1.0.6 from W8s with file updates from android 4.4 (from bulat42,)
Lewa OS V5 from 11/29/13 (from serdgi0)
BaiduOS (from serdgi0)
Lenovo on THL_W8S (from olmusi)
XPERIA on THL W8s (from olmusi)
XPERIA 2 on THL W8s (OS 4.2.2)
MOD JellyBean 4.2.2 in the style of Samsung (OS 4.2.2) (from olmusi)
JellyBean 4.2.2 Rom (samsung style) yandex mirror Embellishments

MIUI firmware

MIUI V5 ..... RUS ( has providedShradder, ) Firmware updated
Upgrading ota from Miui 4.6.6 to Miui 4.6.13 -here (source) and andhere (from google disk)
MIUI from Nidrom
Miui 4.6.6 (RUS) ( has providedalextu )
Miui 4.5.9 (RUS) ( has providedalextu )
MIUI 4.4.25 ( has providedalextu )
MIUI 4.4.11 ( has providedDev_ICE, )
Miui 4.4.4 v.2 (RUS) ( has providedalextu )
MIUI 4.3.28 ( has providedDev_ICE, )
MIUI 4.3.7 with nidrom (laid outShradder, )
MiUi 3.11.29 from 11/29/13 (from serdgi0)
MiUi 3.11.15 (from olmusi)

Lewa OS firmware

Lewa OS V5 version dated 12/27/13 + 06.06.14 (there are earlier) (from serdgi0)

Instructions

Drivers, utilities, programs
Manual firmware using the SP Flash Tool.
Manual firmware using Modrekoveri
Installing ADB Driver on Windows 8 X64 System
The program SP Flash Tool eats away all sorts of errors or not the correctness of the scatter file
Increase memory ./data/app
#Modreavery
Installing a Modified CWM, without connecting to a PC.
# root
Some description of the functions of moderation
Instructions for obtaining Root rights and installing moderation
The program for root access
# Miscellanea
A little about optimization
A small addition for fans of MIUI
Smartphone loading in safe mode
Recovery (change) IMEI codes
How to log in (recovery) | (factory) mode
Proximity sensor calibration
Using code*#*#3646633#*#*enter the engineering menu

Patches

Battery with interest- Battery with interest for stock 1.0.6. - installation using modrekoveri
Bagel style battery- Battery with interest for stock - deodexed firmware .1.0.6. - Set via CWM or TWRP.
Battery with interest- Battery with interest for stock - deodexed firmware. - installation using modrekoveri
ring up.zip- Patch unlocking ring higher and enlarged clock in the center on the lock screen - installation using modrekoveri
TWRP Recovery 2.5.0.0 - installation using modrekoveri
HKPHONE-ROM-EDIT_US.apk - A program for allocating internal SD to the system memory of the phone ./data/app
Patch for full-screen photo caller (for stock firmware) - installation using modrekoveri
CWM 6.0.3.3 - installation using modrekoveri
SWM and TWRP recovery

miscellanea

Information on the engineering menu

5.1. If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant.+/-.
5.2. The reputation of other participants can be influenced by any user who has collected 15 useful posts. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the button A complaint
Do not be indifferent - the user spent his time on you and did his best to direct you to the "right direction"

If you have any wishes regarding the design and saturation of the information in the header - please inform the PM. I will not disregard anything

Post has been editedolmusi - 16.08.18, 21:20

Reason for editing: Message # 2095, by Segrin

[leupar]

olmusiYes, the phone turns on, it works. When turned on, it connects to the computer to see both flash. Right now I poured miui, I will try to go through it to the computer. If I can’t do it, as you described above, delete old firewood.

[olmusi]

leuparDo not do anything yet. To the computer turned off, one driver is connected at the initial stage, then it flashes with the firmware and the second driver is connected, see this moment

[leupar]

olmusiHe then blymkaet, connects type. But there are no changes in the flashlight. Then after 5 seconds, the sound of disconnecting the device from the computer again. And in the device dispatcher, what I have in the screenshot above disappears. And that's all.

--------------
Strange. The port has changed, like a flashlight gave an error. I tried another version of the USB flash drive, an old one, the firmware went.

Post has been editedleupar - 17.10.13, 23:02

[olmusi]

Wait first try to change the cable (sometimes it happens) Try to change the port. And only then try to install firewood again.

[leupar]

[email protected], 22:27

So I got olmusi Root and moderation in two hours when I got home after receiving the phone

For the first time on the model THL W8 Beyonce everything went without any problems, exactly as it is written in the instructions. But with this model came the incident. I installed the stock firmware via a flashlight. Then I decided to make a root and recovery. After pressing the button, get a temporary root, in the window of the MTK Droid it was written like this:

On the root tab. backup. recovery buttons are not active, so this picture:

How to be?

[olmusi]

leuparAlready it was. First you need to get the root of this utilityFramaroot (Post # 21218632)
And then by the manual that I wrote.
PS Just the day before yesterday it was. We decided in this way.


Posted on 10/18/2013, 00:17:

Added to post.
It will not be worse

Post has been editedolmusi - 18.10.13, 00:33

[leupar]

olmusi
You believe, here, too, wrote and remembered that the last time, at first, the root did this prog. And then I wanted to recover according to your instructions :-)

[leupar]

JellyBean 4.2.2 Rom (samsung style)


JellyBEan 4.2.2 Rom (samsung style)


Super firmware, if it cleaned up from all the excess, and leave naked JellyBEam. And it turns out too heavy. Although there aroma installer, the choice of installing programs.

Post has been editedleupar - 18.10.13, 10:14

Reason for editing: Added

[alextu]

Leupar @ 10/18/2013, 09:08

Super firmware, if it cleaned up from all the excess, and leave naked JellyBEam. And it turns out too heavy. Although there is an aroma installer, you can choose to install the programs. Post edited by leupar - Yesterday, 09:14

And how is it with the smoothness of the work of the launcher, and in general as the speed of the firmware, are there any friezes when scrolling the desktops?

[alextu]

The program SP Flash Tool eats away all sorts of errors or not the correctness of the scatter file

1 If the program is installed on the system disk C: / you need to move to another partition
2 If you are using Windows 7, Windows 8, Windows Vista operating system, the SP Flash Tool must be run as administrator.
2.1 How to run the program as an administrator: Direct the mouse over the shortcut of the SP Flash Tool program, right-click and select the item"Run as administrator"
3 Check that the path to the scatter file path is very short and does not contain Chinese characters"ж ё зєї е€· еЌ‡зє§ еЊ… 20130226."

Post has been editedalextu - 18.10.13, 11:33

[leupar]

alextu
It seems the launcher works smoothly. A couple of times gmail errors crashed, but I think this is from the recovery by the titanium. There are a bit of brakes but not critical, I think it is from the severity of the firmware. And in general, if there was a bare firmware, just like a stock of the Jelly Beam, I would love to leave it.

[alextu]

How to log in (recovery) | (factory) mode

During the reboot, hold the button
volume down - boot in Factory mode
increase the volume - download recovery mode

Posted on 10/18/2013 12:01 PM:

Leupar @ 10/18/2013, 10:55

It seems the launcher works smoothly. A couple of times gmail errors crashed, but I think this is from the recovery by the titanium. There are a bit of brakes but not critical, I think it is from the severity of the firmware. And in general, if there was a bare firmware, just like a stock of the Jelly Beam, I would love to leave it.

And with the help of root rights + the file manager will not be able to clean it manually?

[alextu]

Proximity sensor calibration


1. Go to the service menu (factory) mode (when the phone is turned off, disconnected from charging - click "turning onFurthervolume minus"
2. Go toTest report
3. ChoosePS Calibration
the phone must be aimed at a void without obstacles
we pressclear calibration,readings should reset to 0
then we open the proximity sensor at a distance of 1 cm with our palm and pressDo calibration
- we quickly check the performance by the values ​​of 0 - there is no obstacle and 80h there is an obstruction, we exit the calibration menu
4. Next, go to the menuALS / PSand now we thoroughly test with different light conditions - if everything is ok then we pressTEST PASSthe menu should be marked in green color, then reboot through the menuResetorRestartI do not remember exactly - everything is ready - the sensor is calibrated.

Post has been editedalextu - 18.10.13, 12:10

[alextu]

A program for allocating internal SD to the system memory of the phone ./data/app
0) Making Backup with Recovery
1) Download
2) Install
3) Select the option you want to combine
4) Boot into Recovery
5) Make a Wipe
6) Reload Recovery
7) Restore backup

HKPHONE-ROM-EDIT_US.apk

Post has been editedalextu - 18.10.13, 12:21

[leupar]

[email protected], 14:01

And with the help of root rights + the file manager will not be able to clean it manually?

It turns out. Just need to figure out what can be removed and what is not.

[olmusi]

If not half of that third exactly blew, the smoothness of the speed level, for the whole day did not find any glitches.
I changed the camera to lenovo for snap, my keyboard is purchased, but here it is also with a lot of extra files

Post has been editedolmusi - 18.10.13, 14:26

[olmusi]

In the evening after work I pick it up. There you can make it up to two hundred and fifty weight. But at the same time, Google will be present only in the form of a market. I also changed the dialer, my dear with the search for T9, and I picked the agold reluctantly (dreary) and so for my beloved I did a couple of nice buns and now I like it. (At least it will be like a week :-))

Post has been editedolmusi - 18.10.13, 14:25

[leupar]

Olmusi @ 10/18/2013, 16:24

But at the same time, Google will be present only in the form of a market.

Google services can be installed separately, if someone wants. 250 meters is much easier. And will the installer remain, or will you also remove it?

[zvezda225399]

Official update of stock firmware
ThL_W8s.JB2.FHD.EN.COM.16P256_MT6589TV1.0.4_20130923

WatchHere
PerezalHere

Post has been editedmaster_lie - 20.10.13, 14:09

[zvezda225399]

MIUI firmware update 3.10.18

- Built-in transition effects
- Built-in sound enhancement system Viper4android hi-fi / fx
-Can download themes for free
-Cleaned the maximum of the Chinese luggage
-Patched market
-Fixed some jambs

you can downloadHere

Post has been editedzvezda225399 - 19.10.13, 00:33