Stitched custom firmware from the cap. Not started by default vayfay had to include the most ... The modem has not been cut, what I was doing ... I tried the firmware "Firmware Rooter" Saw modem, but could not zapusttit finds a modem, but does not connect ... PPC. .. I will suffer with the standard.

Who is such,http://prntscr.com/46298x, Standard.

3131 modem megaphone. Tried to put openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.7z and now with this link "Firmware ROOter (how many do not plug a modem, they themselves define and launch the connection)" both do not run the modem. The first did not see the modem, the second sees the modem but does not run the Internet concatenate.

guys please help. There TP-Link 3020, MTS modem - 824f, unlocked, firmware Hilink 22.470.07.00.00. Simca native mts. I tried to put 2 firmware version ROOter - red and FunnelWeb 2014-04-14. Both firmware does not see the modem, respectively, does not rise compound. On the standard firmware everything works automatically%) would like to have an upgraded, with the possibility of a 12-night rerun sodenenie with MTS.

vint2007,
What is that for such programulina huaveev?

Good day,

I have a TL-MR3020 want to buy the MTS modem Huawei 824FT to work in 4G. Question: they compatible?

If we are talking about the E3272, which MTS 824 is compatible. Above people have written that the plant, even with the standard firmware. I tried a megaphone 100-4 (E3272) not worked in PPP mode and NDIS.

Please help: TL-MR3020, firmware out of the box - 8853A-MR3020V1, previously worked with a 3G-modem recently acquired a 4G-modem from Megafon Modem M100-4 (Huawei E3272), plugged in, it worked. Yesterday, accidentally pressed the WPS button, then there was a network with a different name TP-Link TL-MR3020 ... and stopped handing out online. Am on weekends in the country, the laptop is old, no wi-fi module, so the ability to diagnose your network, the connection check is performed via the tablet. Pressing the reset did not change anything. I decided to enter the web-based interface of the router, dig into the settings. So - does not go o.O. I enter in the address bar of any of the three browsers 192.168.0.254, and after a moment's attempts to connect issues webpage is not available. On the router are lit power and LAN. If anyone knows, tell me what it might be? Thanks in advance!

Post has been editedJeans - 10.08.14, 20:36

It is necessary to try to disable the modem to reset the router to factory settings and then have to go on 192.168.0.254. After that, connect the modem and configure as usual.

The modem is turned off course, it is plugged into a laptop, the reset did ... :-(

Then we have to watch what address is assigned to the laptop and Gateway. And knock on the gateway.

Hmm, but there is already a dark forest went for me: mellow:. But in any case, thanks for the tip! It may be about to try it?
http://www.tp-link.ua/article/?id=375

Connect the router to a laptop without cable modem. Wait until the system receives an address. Then either you go to the properties of the network connections, adapters settings, and there look in the data address of the computer and the gateway address, or start-run-cmd -enter.
console typing ipconfig of Enter
see the address and gateway.
Next, write in the browserhttp: // adres_shlyuza /
If done correctly and the router is working properly, you should see an invitation in vebmordu.

hardd2007 Happened! : Clap: The most interesting thing is that the gateway address was .... 192.168.0.254 o.O Otplyusovat, unfortunately, I can not, but what is called sincere and whole-heartedly!

Posted on 10/08/2014, 21:54:

vint2007 Thank! All this I did once, I do not so I am a complete loser: D

Bought today this unit, I put huawei e150 modem (old), the Internet to drain firmware I by not wait modem, reflash the firmware on the topic curator - the modem begins to respond, but For connection to the Internet did not show the signal and other information (set up according to the instructions) and light on the modem was burning red, which means that it does not catch the network, although the Internet has been (a few minutes, then shut off the connection). I'm frustrated with the firmware download sitehttp://ofmodemsandmen.com/downloads.html(Can not remember which) began to sew, but she did not ask restarting the router, everything remains the same (the password which I introduced on wifi), even set up your home network through the router, the files are thrown from one computer to another, but introducing ai pi router in the address bar, not what happened (wrote that no Internet). Pomuchat computers and the router reboots the results did not give, everything worked, but in the web I could not go to the router interface. He began to pursue recovery methods using the instructions given in the header theme "More instructions for restoring routers (under partial load - the kernel must be intact)." Sew the standard firmware to recover from the cap. But the router is only the leftmost light became quite bent to burn, then light up even the most right, rotten, and all the lights lit up. When connected through a computer connection cable. He does not see, but when you click WPA / reset compounds the computer finds a button. Help to return to normal life plizz !!!

Post has been editedsasha123st - 13.08.14, 14:30

Prompt AMP-ta, the unit can be taken with Nat whistle 4G 3272 or 3276 and to distribute it to the Ethernet? And even if a whistle is connected BY 16db antenna on the device pull the tandem?

Can. Sam checked with 3272 on PPP and NDIS. About the antenna turns out experimentally.

Sorry, but you can not link-whether to give more details, For Dummies, the instruction how to configure the distribution of Nat on wires from the whistle?

If the LED stays on the left, and then another turns right, then right goes out, and then zagorayutsya everyone else, then all of the new LED lights up left, then another turns right, then right goes out, and then all the other zagorayutsya, the router can throw?

If the light the other LEDs except the power, then at least u-boot there alive and chemin de fer can be restored. If the WPS flashes during startup, then there is a lively core router and you can try to download a special recovery mode. If nothing happens, but the lights flashing when loading, here are instructions on how to fill in the firmware via the console port (u-boot to be alive)http: //wiki.openwrt.or...nsole.and.tftp.experts

hardd2007 uy, do not do not understand :(, can be rustic language?