TP-Link TL-MR3020 - Discussion | Setup, firmware, description, suggestions
asnikifor @ 14.03.19, 05:52
if you put on the processor router TP-Link TL-MR3020 radiator. What will change in your work?
Most likely - nothing changes: the volume of the housing 3020 is very small, the ventilation holes in him. Heat is released to go nowhere - that the radiator without.
However, the processor allocates small enough heat to overheat even in a "matchbox".
If we question cooling "edge worth" - try the failed top panel of the case, we come across such routers, to "pluck out" ...
Version 3, all the lights are blinking, it might be? Tried to flash with linux through tftp on openwrt, it did not happen. Then, when the diodes have blinked trying to flash with Windows via tftp, it did not happen. How to sew? The cap is no manual. Console connector on the router either, that is to say through the terminal does not connect?
hardbox00 @ 14.03.19, 18:17
How to sew?
TP-Link TL-MR3020 - Discussion
TP-Link TL-MR3020 - Discussion (Post solalex1 # 78883659)
TP-Link TL-MR3020 - Discussion
Post has been editedsolalex1 - 14.03.19, 16:34
To be honest - all this is seen and read. Just the top of this no, it is not convenient. Tried all described what you got rid of, not sewn, what is the reason I'll never know. If you hold the reset when on the device, the network on the wired interface appears, but no IP does not receive.
hardbox00 @ 14.03.19, 18:53
the wired network interface will appear, but no IP does not receive
you probably have not read, it is written everywhere - ask a static address to the computer 192.168.0.225
and that is all there is in a cap
 |
Statics scored different and such tried. Only the ip and mask (the default), no gateway. Thank you for that answer, and trying to help. And screw up the boot loader attempts I could flash and how to recover if you could ...
hardbox00 @ 14.03.19, 19:23
Static scoring different
do not need a different, you only need to 192.168.0.225
tftp server in the log will be seen that the router requests the firmware file
hardbox00 @ 14.03.19, 19:23
And screw up the boot loader attempts to flash I could
it is hard to do
All good, the next question is, do not know in this topic or via a modem, but oh well, adjusted if, in general, there is this device with iOS Bouncy snowdrop on 07.04.18 and modem E1750 Megaphone stitched. He worked with a megaphone normally, reception transmission were stable now preshol at Tele2, everything seems to be nothing stable download speed, but predachi chudit, send files, speed, flies up to about 12Mbps, seconds several predachi go, then stops through kakoeto time again same. that may be, the antenna I have an external, router or modem. may change that in the settings?
jno, How to solve a problem? Not very convenient, and not all of Georgia, today one of the attempted file download instantly loaded and 45-50 percent of costs, then do not go.
Hello everybody!!
Prompt firmware to version 3.2 to telnet worked and wifi does not fall off ??
What probyval all current ssh, and because the client can not to connect via ssh routoru because that routorah ssh updated ((
On the client, ssh is not possible to update the ((((((
That's such a mistake gives !!
At a current client is
That need telnet!
Prompt firmware to version 3.2 to telnet worked and wifi does not fall off ??
What probyval all current ssh, and because the client can not to connect via ssh routoru because that routorah ssh updated ((
On the client, ssh is not possible to update the ((((((
ssh: connection to [email protected]: 22 exited: no matching algo kex
That's such a mistake gives !!
At a current client is
ssh
Dropbear client v0.51
Usage: ssh [options] [user @] host [command]
Options are:
-p<remoteport>
-l<username>
-t Allocate a pty
-T Do not allocate a pty
-N Do not run a remote command
-f Run in background after auth
-y Always accept remote host key if unknown
-i<identityfile>(Multiple allowed)
-L<listenport: remotehost: remoteport>Local port forwarding
-g Allow remote hosts to connect to forwarded ports
-R<listenport: remotehost: remoteport>Remote port forwarding
-W<receive_window_buffer>(Default 24576, larger may be faster, max 1MB)
-K<keepalive>(0 is never, default 0)
Dropbear client v0.51
Usage: ssh [options] [user @] host [command]
Options are:
-p<remoteport>
-l<username>
-t Allocate a pty
-T Do not allocate a pty
-N Do not run a remote command
-f Run in background after auth
-y Always accept remote host key if unknown
-i<identityfile>(Multiple allowed)
-L<listenport: remotehost: remoteport>Local port forwarding
-g Allow remote hosts to connect to forwarded ports
-R<listenport: remotehost: remoteport>Remote port forwarding
-W<receive_window_buffer>(Default 24576, larger may be faster, max 1MB)
-K<keepalive>(0 is never, default 0)
That need telnet!
Avolon , There is a self-assembling (Padawan like) - in such telnetd possible to include. But he - dyryav same ...
mister-13x, could try _ogranichit_ file upload speed, Problem is that such software .. do not even know what ..
But first ... run known speedtest net and look at the shape of the graph of outgoing traffic ...
Nuts_ Launched almost smooth, but first why a long time standing still, then work, and Yandex measured the way there coming sometimes do not show 0, and all, but if you send the file on his own drive, the transmission goes with breaks, like packs at speeds up to 14 Mbps. Here is a short video if you're interested:https://yadi.sk/i/NLsx2w2BRlXv2w
Post has been editedmister-13x - 15.03.19, 07:44
Reason for editing: Added
Yesterday I bought a device for work tasks.
But immediately a problem emerged - if there is no Internet on the SIM card of the connected modem, the router, having understood this, starts to reconnect endlessly.
But this is not necessary for the work task, since the modem installed the SIM card (MTS) the modem goes to a closed corporate network with its APN, where there is no Internet in principle.
I understand that the router checks a certain address / addresses on the Internet for a connection, if there is none, it considers that there is no Internet and is trying to reconnect.
Question to the knowledgeable: how to disable this feature or change the address to check for tyrnet?
From technical support did not achieve anything.
...
I connect the same modem to a PC and establish a connection - there are no reconnections.
To check, I also put an ordinary SIM card with the Internet, everything is OK, the router holds.
Post has been editedFreeflax - 15.03.19, 08:21
But immediately a problem emerged - if there is no Internet on the SIM card of the connected modem, the router, having understood this, starts to reconnect endlessly.
But this is not necessary for the work task, since the modem installed the SIM card (MTS) the modem goes to a closed corporate network with its APN, where there is no Internet in principle.
I understand that the router checks a certain address / addresses on the Internet for a connection, if there is none, it considers that there is no Internet and is trying to reconnect.
Question to the knowledgeable: how to disable this feature or change the address to check for tyrnet?
From technical support did not achieve anything.
...
I connect the same modem to a PC and establish a connection - there are no reconnections.
To check, I also put an ordinary SIM card with the Internet, everything is OK, the router holds.
Post has been editedFreeflax - 15.03.19, 08:21
FreeFlax @ 15.03.19, 10:19
I understand that the router checks a certain address / addresses on the Internet for a connection, if there is none, it considers that there is no Internet and is trying to reconnect.
and firmware must sink?
Who knows what to tplinkovtsy nasuvali she closed
put openvrt and configure as it is necessary
Posted 03/15/2019, 8:42:
mister-13x @ 14.03.19, 21:11
Megafon Modem E1750
This modem download speeds of 0.3-0.4 Mbps all, you want a lot from him
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement