Klev_ ,
Thanks a lot for the tip! The blessing was a backup so I restored. And can you give a link to the program with a description, if not more difficult?

BOCHSRC.txt

Nyditot Virtual Display.

volta_john ,
Thank you very much !!!!!

I put this Virtual Display and installed 640x480 and the emulator itself does not start just: ((Help please: (

mark-pro ,
try to change in the registry: hkey_local_machine \ drivers \ consol default value to 0. In fact, the previous page describes how to solve many problems. :)

It does not help unfortunately. It still does not start. Already the whole forum shoveled: (

>mark-pro
And PocketConsole and PocketCMD delivered?

1) dotpocketimg-2846-dotpocket2003.exe(1.08 MB)
(for VGA machines is not needed) - in place of it, I have Virtual Dispay

2) pocketconsoleimg-2847-pocketconsole_arm_setup.exe(88.5 KB)
- put it

NO MORE THAN ANYTHING

Already put everything. Still not working.

Managed to run! Thank you all! Now the question is different. When I press 5 to start the download, the lines run quickly and then it just throws me out and that's it. What could it be ?

Somewhere there is a mistake. Or in the BOCHSRC.txt file, or in the image file * .img.

Clear. I'll dig. As I dig up, I will unsubscribe.

ktota can fork your bochsrc.txt who does he work on fs n560 ?? everything seems to be correct, but he cannot find a bios!<<<ROM: system bios image undefined>>>

>evilfox
Check the correct paths to files.

Here are the contents of bochsrc.txt:
########################################################
display_library: win32

romimage: file = "\ SD Card \ bochs \ BIOS-bochs-latest", address = 0xf0000 # check here

megs: 8

vgaromimage: "\ SD Card \ bochs \ VGABIOS-lgpl-latest" # here

ata0: enabled = 1, ioaddr1 = 0x1f0, ioaddr2 = 0x3f0, irq = 14
ata1: enabled = 0, ioaddr1 = 0x170, ioaddr2 = 0x370, irq = 15
ata2: enabled = 0, ioaddr1 = 0x1e8, ioaddr2 = 0x3e0, irq = 11
ata3: enabled = 0, ioaddr1 = 0x168, ioaddr2 = 0x360, irq = 9

ata0-master: type = disk, path = "\ SD Card \ bochs \ c.img", mode = sparse, cylinders = 203, heads = 16, spt = 63 # and here
boot: disk

ips: 1,000,000

floppy_bootsig_check: disabled = 0

log: bochsout.txt

panic: action = ask

error: action = report

info: action = report

debug: action = ignore

debugger_log: -

vga_update_interval: 250000

keyboard_serial_delay: 250

keyboard_paste_delay: 100000

floppy_command_delay: 50000

mouse: enabled = 1

keyboard_mapping: enabled = 0, map =
########################################################

Hello!
I have HTC P3400 (with QVGA display)
dotpocket and Nyditot Virtual Display do not work !!!
After I put in them 640 * 480 they require to restart the PDA, when it restarts, it hangs on the very first screen, it only helps the hard reset ..
What can I do? Can there be any other thread like these?

>DS1234
Probably you have WM5 or WM6. And on vm5 / 6, the doppacket and virtualdisplay versions below 5.02 do not work.

Yes, and the emulsion, which in the cap - not the latest.
There is a new version 2.3.5. Its portedGreatevk . For which he thanks a lot. Use the new version.
There is no need for a virtualdisplay.

The people on the O2 xda flame wm5 after changing the value in the registry to start the console, the PDA died, only the hard reset helped, tell me another way to start the Boch. Thanks in advance.

vaspet1 , try the release of Bochs from GreateVK. My Windows just went on it.

On the Nokia 5500, I used BOSCHК»em in Java. On the rover r5 and HP 6815, it also runs through esmertec. The truth could not figure out how to connect the hard image. If anyone is interested, then here I have laid out the distribution kit and description
http://www.dimonvideo.ru/uploader/file_96968.html