Measy U4K / IconBit Toucan Stick 4K - Discussion | TV Box Allwinner A31 chip



Rep: (1)
DiscussionMeasy U4K / IconBit Toucan Stick 4K
PictureTv box
Discussion пїЅ


Specifications
A photo
Attached Image

Attached Image

Attached Image


Firmware
Most likely this is the last beta or release
recovery TWR
Stock Firmware for CS918S Allwinner A31S Quad Core TV BOX built in XBMC
Custom recovery
Measy U4K / IconBit Toucan Stick 4K (Post bobkindershock # 34887560)
Text taken from the message 145 - Installation manual - a custom recovery is poured directly on the whistle. Throws update.zip to the root on the sdcard or extsd. Go to settings, there are opening Backup & reset, then click on Recovery / Update. Then click on the Select file. In the file manager we find our update.zip and click on it. As a result, after some time, you should get into the custom recovery.
Text taken from the message 142 - getting Root, through this rekoveri - To put on kitkat Ruth, you must install a custom recovery, then recovery using a script to delete from the folder system some unnecessary in your opinion the application, because that Ruth did not put out -this lack of space in the system folder. Then again with a script to install the Chinese superuser to 4.4.2.

Useful


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.

Post has been editedmihadom - 25.03.19, 21:48
Reason for editing: Method of improving the hardware Wi-Fi



Rep: (0)
somebody found a firmware? U4B to have two pieces, and for that no one



Rep: (3)
And where there is firmware for Measu U4B?



Rep: (1)
http: //www.freaktab.co...2-with-CS918S-firmware



Rep: (0)
http: //www.freaktab.co...4K&p=144587#post144587



Rep: (5)
thread who tell us how the device works? heated, tupit or what?



Rep: (15)
All seen 4k look: rolleyes:



Rep: (2)
Firmware found on IconBit Toucan Stick 4K (the same Measy U4K, sold under the brand IconBit)
current firmware from 16.01.2014
firmware archive
Inside there is an instruction

It is suitable firmware from CS918S
link
To install take IMG file from the archive and use the installer from IconBit (in my case, the installer from CS918S not earned)

This firmware is much more bright, but less than "from box" buns.
Both firmware working wi-fi and ethernet adapter.

Also regardless of EEPROM device is rather weak heavy fullhd reproduces content (particularly bd remux). I hope in the future to fix it with new firmware or modes from craftsmen.

Try firmware and unsubscribe about results.

P.S.:predlagayu rename the theme in "Measy U4K (IconBit Toucan Stick 4k)" that would not create a separate topic.



Rep: (2)
Firmware with root from cs918S
firmware on 01/04/2014



Rep: (1)
Link to previous post does not appear if you can perezaleyte: thank_you:



Rep: (2)
the new firmware from 6.04



Rep: (1)
ser9ga @ 22.04.2014, 17:44*
the new firmware from 6.04

And her WI-FI and Bluetooth work? Usche interested she Root or not?



Rep: (1)
Tried firmware from iconbit and cs918s. At least firmware cs918s an tu tu and puts out more balls, and you can overclock per cent, but full hd video plays worse (with twitching), but not the wi-fi, the external sd does not see, and freezes. And on the firmware from iconbit though no root and native launcher specific, but is stable, wi-fi is not interrupted, full hd video plays better, and the other launcher can deliver. Now, if another Ruth get her what would have been a little more accessible software (Titanium, root app delete, etc.), Was used as an ideal with 4.2.2. While staying at the "firmware from 16.01.2014 IconBit Toucan Stick U4K".



Rep: (2)
last two firmware from cs918s are much less than the brakes interface, compared to iconbit. FullHD bit choppy, but at least it plays. I CS opens all BDRemuxy even 40 GB, but many plays with the troll, quite nesmotribelno. A iconbit more than half did not open films. But in the last cs sd card does not work.



Rep: (1)
I'm on all firmware versions of CS is not working wi-fi. Only on the link firmwarehttp: //www.freaktab.co...4K&p=144587#post144587wi-fi zarobotat, but with a certain periodicity falls off, and the annoying non-working sd-card. For smooth video playback, full hd, the difference between iconbit CS918s and did not notice. But firmware iconbit no root, and because of this there are some restrictions (can not connect multiple USB-flash through habchik - sees only one, well, etc. previously described.).



Rep: (1)
And who knows where you can download the drain firmware 4.1 measy u4k, if anyone knows plz share the link. : Thank_you:



Rep: (10)
Join. who live U4K (with the native firmware) to sdampit? Or where to get?
Tested Iconbit-vskie firmware - the only ones who regularly work - BUT
The problem - hell get Ruth, system.fex gathered in the iso, so even podpihnut files does not work, while fighting)))



Rep: (0)
rustam2v @ 16.05.2014, 14:34*
Join. who live U4K (with the native firmware) to sdampit? Or where to get?

I ordered on AliExpress U4K today as it can deliver sdampit



Rep: (10)
Thank you already figured out. Many thanks CYGWIN project.
After a little trickI rebuilt the latest firmware from the icon- it is much more stable than the meat. )))
Rutitsya standard means for Allwinner A31.




Rep: (1)
I did not understand how to turn off the \ include. If you simply leave to work by switching on the TV to the HDMI another, then a few hours later switching back to see completely hovering device, it helps only the power to distort. On insertion of the meat did not seem to hang, but after it has lost the mouse - only a complete reboot. And off button does not turn off. I tried to put the lock screen and translate it - does not help. All right?



Rep: (1)
rustam2v @ 17.05.2014, 14:25*
Thank you already figured out. Many thanks CYGWIN project.
After a bit of frills rebuilt the latest firmware from the icon - it is much more stable than the meat. )))
Rutitsya standard means for Allwinner A31.


And if you can detail how to get Ruth to chew, and then tried but failed due to lack of update application. Or this firmware already with Ruth


Full version    

Help     rules

Time is now: 25/11/19, 8:32