warm snow 
[offline]
Group: Friendssavagemessiahzine.com
Messages 2176
Check in: 11.07.05
Xiaomi Mi 8
Reputation: 396 
| HTC One mini - Official (Custom) firmware (OS 4.X.X, OS 5.X.X) One mini M4Description | FAQ | Marriage � | Modifications of software and decorations � | Discussion � | Purchase ATTENTION! ������ ��� ������ ������ � ����, ���������� ����������� ���������� �����!
�������� �������� � ���������� ���������� ������� download ������.
The theme of our phone on XDA All operations(custom firmware, core, radio, hboot, recover, unlock bootloader) are made onyour own riskand in some caseswith loss of manufacturer’s warranty !!!
Be sure to make a backupusing Clockworkmod Recovery or TWRP Recoverywith saving on PC. It will always give you the opportunityrestore phoneor bring it to factory condition.
Battery must be chargednot less than 30%. Firmware fromhboot 2.22not suitable forhboot 2.19-2.21! (and vice versa).
Before returnS-ONdo not forget to put stockhboot(if the custom firmware was flashed), otherwise you will getbrick. Forhboot 2.22use only recovery from2.7.0.8and above forhboot 2.21-2.19you can use everything except2.7.0.8and higher. Important information! What you agree with. Read first! By unlocking the bootloader (UNLOCKED) you agree that: - Using an unlocked bootloader may result in a full or partial cancellation of the warranty, since your smartphone may not function properly (the NTS does not guarantee) in this state.
- If your smartphone requires repair, HTC (or a service center) may charge a fee to compensate for the additional costs associated with the unlocked bootloader.
- In the process of unlocking the bootloader, you voluntarily transfer to the NTS the data about your device (S / N, IMEI, e-mail). The transmitted information is stored in the NTS database and can (will) be used in paragraph 1 and paragraph 2. !) In the process of unlocking, a reset is performed to the factory settings with overwriting of all data (contacts, sms, etc.). To save and restore later, use the My Backup program and other methods (transfer contacts to SD, google, etc.). Before starting the procedure, check that the following are downloaded from Windows: Antivirus, Firewall.
- After unlocking, the state of the bootloader will become "UNLOCKED", even if you lock the bootloader back, it will become "RELOCKED", you can return the status of "LOCKED" only by flashing the modified hboot.
Why deleted my post? Delete: - Questions not related to firmware;
- Questions about third-party software, not related to the firmware.
- Questions, answers to which are in the FAQ on frequently asked questions. You are too lazy to read - this is your problem;
- Questions whose answers are in the instructions;
- Posts with the content of the type "put the firmware - does not start, does not load further the htc logo" will be deleted immediately (answers with the contents of "our kernel, or make wipes" are deleted after the question);
- Requests to help if there is no complete description of the actions you have performed;
- Short reviews about the firmware (in the style of "flashed ... works fine");
- Suggestions with no semantic meaning. (oh, now I'll put sm11 on how this firmware works.);
- All messages containing "Thank you Dear, Bratuha heartily, Native, God give you health, etc.";
- Feedback on the return to another firmware without a detailed description of the existing problems;
- Your posts are correspondence with a specific user. For this, there is a QMS;
- Your post was deleted by mistake (and this sometimes happens :))
- All other cases described inthe rulesforum.
Frequently asked questions - What is Odex and Deodex?
- What is firmware.zip? | firmware.zip is part of every OTA update from HTC. It contains important parts of the firmware: radio, bootloader, recovery, kernel, etc.
- Why is it important to flash firmware.zip and why do I need to flash it? | It is recommended to have the latest firmware.zip flashed for your device for the best modem performance and system stability. Sometimes it is necessary to have the latest version of the bootloader, otherwise your device may not work correctly with new system updates.
- Do I need a locked or unlocked bootloader, so that I can flash firmware.zip? | Your bootloader must be locked (relocked).
- If you enter adb help when you enter adb commands in the CMD, this means that you have the old version of adb. You can check the version with the command - adb version
- If "adb" (or "fastboot") occurs is not an internal or external command, an executable program or batch file:
- Run the command line (Win + R, enter cmd and press Enter)
- Enter cd c: \ android (instead of android, enter the folder where the adb.exe file is located)
- Done!
- The adb commands are executed on the enabled phone with USB debugging enabled.
- The fastboot commands are executed in bootloader mode (bootloader).
- Prerequisites for installing OTA updates: Full stock firmware without any changes for its CID / MID, stock recovery and core, the root does not interfere.
- List of system applications that can be safely removed + More information
- If at the entrance to the recoveryred triangleorgreen arrows, it means you have stock recovery.
- If the phone is not seen by the teamsfastboot devicesoradb devices, then the problem is in the drivers (or USB debugging is turned off).
- The backup is not copied to the computer.
- To group calls in the call log in Android 4.3 - 4.4 you need to the top left:Phone book ->Latest numbers.
- If there are problems with recovery (it is not installed, it does not enter, the firmware is not loaded after installing the recovery), you need to clear the cache.To do this, when the phone in the bootloader is run from the PC: fastboot erase cache.
- How on 4.2.2, 4.3, 4.4 enable developer mode? (To enable USB debugging).
- If system applications are returned after a reboot,then this means that you have S-On.
- After installing custom recovery in the bootloader, the inscription appears*** TAMPERED ***, this is normal.You can remove if you have S-Off.
- After installing the custom firmware / recovery / kernel when loading at the bottom, a red inscription appears(This build is for ....), this is normal.You can remove it by installing a modified hboot or firmware.zip. It does not interfere with anything.
- When the phone is turned off, I connect the charging and the phone is loaded into Recovery. | So it should be, this happens with custom Recovery!
Instructions When working with the phone via ADB, you should use USB 2.0 ports when connecting the phone to your computer, since operation via USB 3.0 is unstable
There may also be difficulties with Windows 8.1 How to install custom (stock in * .zip format) firmware In order to flash custom (unofficial) firmware you need: 1. Unlocked bootloader (bootloader)2. Installed custom recovery (CWM or TWRP). For firmware based on Android 4.4 you need to recover TWRP 2.6.3.3, CWM 6.0.4.5 and higher3. Downloaded firmware in * .zip in the phone. More convenient to put in the root sdcard 4. S-off is not needed!5. Straight arms Installation: 1. Any intervention in the firmware should start with backup !.1.1. First, backup applications and data, then restore them to a new firmware. It is convenient to use for this. ® Titanium Backup. 1.2. Next, backup the existing firmware. To do this, you need to select Backup in the recovery: in CWM - Backup and Restore / Backup, in TWRP - Backup 2. Wipes, that is, bringing to factory condition. In CWM - Wipe data / factory reset, wipe cache partition, Advanced / Wipe dalvik cache. In TWRP - Wipe, swipe to perform. You can manually select items to clear: Dalvik Cache, Cache, Data, System. To do this, click Advanced Wipe. Or use full cleanup script3. Install the firmware. In CWM - Install zip from Sdcard ->Choose zip from sdcard ->choose the downloaded firmware ->confirm. In TWRP - Install ->choose the downloaded firmware ->confirm 4. Done! The firmware will be installed! 5. Reboot the device How to install the archive through the recovery (radio module firmware, various patches, mods) In order to flash the archive you need to have:
1. Unlocked bootloader (bootloader)
2. Installed custom recovery (CWM or TWRP)
3. The downloaded archive in * .zip in the phone. More convenient to put in the root sdcard
4. S-off is not needed!
5. Straight arms
Installation:
1. Any intervention in the firmware should start with backup !.
1.1. Backup existing firmware. To do this, you need to select Backup in the recovery: in CWM - Backup and Restore / Backup, in TWRP - Backup
2. Install the archive. In CWM - Install zip from Sdcard ->Choose zip from sdcard ->choose the downloaded firmware ->confirm. In TWRP - Install ->choose the downloaded firmware ->confirm
3. Done!
4. Reboot the device Bootloader (Bootloader), Recovery, Root, Kernel How to open and close the bootloader What is a bootloader and why do I need to unlock it? Bootloader (bootloader)- This is a special program that allows you to download the main firmware, by default the bootloader is locked. You need to unlock it in order to be able to put third-party recovery(which is more convenient and functional). The unlocked bootloader will also come in handy later for us to get S-OFF. How to turn on the phone in bootloader mode? In order to turn on the phone in bootloader mode, you need: - Turn off the phone completely without a quick download (you can hold down the "power" button for more than 10 seconds)
- Hold down the volume down button and without releasing the volume down button, press the power button.
How to turn on the phone in Fastboot USB mode? In order to turn on the phone in Fastboot USB mode, you need: - Turn on the phone in bootloader mode,
- Use the volume keys to select Fastboot,
- Connect the phone to the computer using a USB cable (the last one should be installed on the computerHTC Sync),
- After connecting the phone to the computer, the Fastboot mode should change to Fastboot USB mode. If this does not happen, you need to reinstall the drivers for your phone (in the header - Drivers and Utilities).
Before you start unlocking, be sure to backup your data and save it on your computer as unlocking will completely clear your phone’s memory How to unlock the bootloader? To unlock the bootloader, go to this site, we carry out everything according to the instructions. If there are difficulties with English, then use a translator. Detailed instructions on how to unlock the bootloader here. To make sure that you did everything correctly and the bootloader was unlocked, you need to start the phone in bootloader mode, the first line should be indicated with white text on a pink background *** UNLOCKED *** If a line appears *** TAMPERED ***above, this is normal !. To close the bootloader use the command: After entering this command, the inscription will be displayed in the loader *** RELOCKED *** Or with S-offand utilities revone: (more details in the instructions for obtaining S-off) Installation Recovery - Unlock the bootloader (otherwise the error will be Failed: not allowed)
- Download recovery and rename to recovery.img
- Place the file you downloaded into the same folder where the Android files are located, for example C: \ Android
- Hold the power button for 10 seconds, the phone flashes several times with the touch buttons and starts to reboot. You need to press and hold the volume down button as soon as the screen goes out, the phone will reboot into the bootloader. If you did this, but the phone just turned off, then turn on the phone, hold down the power and volume buttons
- Select Fastboot. Navigate through the menu items with the volume keys, briefly press the power button to select.
- Connect the phone to the computer and open the command line.
(Windows XP - Click the Start button>Run>enter CMD in the field and press Enter)
(Windows 7 - Click Start>enter CMD in the search field and press Enter)
Or simply press Win + R and type CMD and press Enter
- Using the command line, go to the folder where we put the files: CD C: \ Android
- Now type in the command line:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot - Hold the power button for 10 seconds, the phone flashes several times with the touch buttons and starts to reboot. You need to press and hold the volume down button as soon as the screen goes out, the phone will reboot into the bootloader. If you did this, but the phone just turned off, then turn on the phone, hold down the power and volume buttons
- Select Recovery. Navigate through the menu items with the volume keys, briefly press the power button to select. The phone will reboot and you will be taken to the custom Recovery.
- Select backup and restore
- Select the backup item and wait, after the operation is completed, you will see a message on the smartphone screen"Backup succesfully Completed".
- SelectReboot System Nowand wait for the phone to reboot.
How to get and remove Root What is Root and why do we need its rights? Term Root - one of the concepts of Linux, which lies at the core of the Android kernel, and those who worked with this operating system know what it is. Root - This is the account of the main administrator, or superuser'a. Having access to this profile, a number of possibilities appear that are not available in normal operation. So, having rightsRooton Android you can: - Modify system files, themes, shortcuts, delete standard applications,
- Run Linux executables,
- Run special applications that significantly extend the capabilities of a smartphone, but require Root rights
- Take screenshots using apps like ShootMe,
- Back up the system, for example, using a popular program.В® Titanium Backup (Post # 3802255),
Now go to the procedure itself (after the bootloader is opened) obtaining rightsRoot: - To install Root, you need a custom recovery (CWM, TWRP)
- Download the program® SuperSU
- We dump archive on internal memory
- Reboot to Recovery. If a third-party Recovery is not installed, install it according to the instructions
- Choose"Install zip from sd card"then"Choose zip from sd card", find our archive, select and install, then reboot.
Root removal How to flash the core - Download core boot.img for the desired firmware;
- Save it to the prepared folderAndroidat the root of drive C;
- Reboot your phone inFastbootconnect to the PC so that Fastboot USB is written and run the command line"CMD"on PC;
- Further we enter commands:
cd C: \ Android
fastboot flash boot boot.img
fastboot erase cache
fastboot reboot Or you can use the program All-In-One Toolkit V3.0How to change CID To change the CID you need: - S-off
- Reboot phone in bootloader
- On the PC, run the command line
- Go to the folder with fastboot (for example, cd c: \ android)
- Make sure the phone is visible on the PC
- To change the CID run the command:
fastboot oem writecid XXXXXXXX where XXXXXXXX is cid. Cid is 8 characters long, for example, HTC__A07 - two underscores How to flash firmware.zip 0. When S-onNeed a signed firmware (from OTA or ruu) and closed bootloader (otherwise error 99) 1. The downloaded archive is placed in the folder with fastboot.exe, renamed to firmware.zip 2. Phone restart the phone to the bootloader 3. Run the command line on the PC and go to the folder with fastboot.exe, for example: 4. Enter: 5. The phone will reboot, the screen will display HTC 6. Enter: fastboot flash zip firmware.zip (After the first input there will be an error "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". This is normal)
fastboot flash zip firmware.zip (Re-enter or until the success message appears - Successfully)
fastboot reboot How to flash zip archive via fastboot 0. When S-onneed a signed archive and closed bootloader (otherwise error 99) 1. The downloaded archive is placed in the folder with fastboot.exe 2. Phone restart the phone to the bootloader 3. Run the command line on the PC and go to the folder with fastboot.exe, for example: 4. Enter: 5. The phone will reboot, the screen will display HTC 6. Enter: fastboot flash zip archive.zip (If after the first input there is an error "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". This is normal)
fastboot flash zip archive.zip
fastboot reboot How to enter the bootloader and the recovery To enter the bootloader you need: 1. Hold and hold the power button for more than 10 seconds 2. The touch buttons will flash and the phone will restart. 3. Press the volume down button and release the phone power button. Or via the command line from the PC: To enter the recovery you need: 1. Log in to the bootloader 2. In the bootloader, moving the volume buttons, select the bootloader and press the power button 3. Next, select the recovery and press the power button. Or via the command line from the PC: 4 ways you can throw the firmware into an empty phone - Adb push
- adb sideload
- USB OTG cable
- ADB plugin for Total Commander
- Instructions: Help in choosing the firmware .
- Unlock forgotten pattern
- Instructions for unlocking the bootloader, installing custom recovery (with pictures)
- ADB plugin for working with memory in the recovery mode (TWRP) via Total Commander
- If there is no Russian language in the firmware
- Working directory with ADB files
*******
- Phased firmware instructions through sideload
- Scratching the phone with an OTG flash card
*******
- We get S-OFF on the new hboot 2.22 with the chip 9001
- How to get S-OFF and super cid
- We get S-OFF right on the phone
- Getting S-OFF with rumrunner
- Remove the inscription TAMPERED
- Translation of instructions on firmware modified hboot v2 2.21.0000 updated 1/7/2013. + some explanations
*******
- Solving the problem with PlayMarket (applications are not installed, "could not be installed on a USB drive or SD card")
- Solving the problem with PlayMarket (applications are not installed, "could not be installed on a USB drive or SD card") NEW
- We get OTA update 6 sense
Option of switching to hboot 2.22 (new memory allocation) on hboot 2.19-2.21 European MID \ CID phones
*******
- Return to the boxed state (S-ON, LOCKED, the inscription TAMPERED removed)
- Script to change the status of the bootloader via recovery LOCKED, UNLOCKED, RELOCKED
- Brick restoration
*******
- How to flash OTA updates manually.
- Add to the photosphere firmware, the ability to put your picture on the lock screen. Sew through rekoveri:
 panorama + new_function.zip(257.25 KB)
- Unlinking from the operator - SIM UNLOCK HTC ONE MINI
- ProgramTeamviewer- if you are not confident in your abilities or are afraid, but “wantâ€, then with its help you can flash your smartphone remotely. To do this, you will need to download the program TeamViewer, firmware, drivers. For details about help, ask a friend.npo100.life
- Return after official ATU firmware from AT & T
- CPU frequency control script
Firmware Firmware for hboot 2.19 - 2.21 Unofficial stock firmware Custom firmware based on the drain Custom firmware based on CyanogenMod Custom firmware based on AOSP Firmwares for hboot 2.22 Cyanogenmod Installing this firmware is strongly recommended through TWRP 2.7.0.8 , to warn in advance possible problems with the firmware through other recovery! [[NIGHTLIES] [4.4.2] CyanogenMod 11.0 for AT & T HTC One Mini - m4 | Download | Locate 4.4 Gapps Kernel, recovery, firmware, hboot Kernels Stock 4.2.2 boot.img (5.98 MB) 4.3 boot.img (6.51 MB) 4.4.2 boot.img (6.66 MB) Recovery Stock 4.2 recovery.img (9.53 MB) 4.3 recovery.img (10.89 MB) 4.4.2 recovery.img (11.2 MB) K There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the sectionI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a button under the messages to which you want to add links. Reason for editing: ROM_4.4.3_ViperOne_m4 |
HTC One mini - Firmware with Sense (OS 4.x) 
06.09.13, 22:21
