Guys, I need help !!
Tablet buggy, I decided to reflash (made a full format)! I did everything according to the instructions. firmware program, taken from the office. site. The bottom line is this: after the firmware, IMEI is erased. now the radio module (sim card) is not working.
Ruth opened the rights, tried a bunch of ways (although they are mainly for MT processes) entered different commands through the Terminal (echo 'AT + EGMR = 1.7, "IMEI_1"'>/ dev / pttycmd1
echo 'AT + EGMR = 1.10, "IMEI_2"'>/ dev / pttycmd1
etc. in this spirit ...)
no good. sometimes I get a message in the form: "no such file or dirictory".
I climbed in the system through Root explorer, the nvram folder is missing ...
how to be? : '- (

domen_2008
If you solve this question, please unsubscribe as.
I'm just starting to understand how all this stuff works.
I'm trying to put the firmware from Onda.
The touchpad has earned, but, as I suspect, now neither wifi nor 3G works ...
Everything to look for, it is necessary to connect with handles separately ...

Maybe your sim card does not work, and you suffer? (anything can happen ...)

The only thing that I know, the factory firmware is already running with root rights ... (you do not need to install a separate root)

Post has been editedChuDoVisChe - 01.09.13, 17:07

Damn maybe I had got stuck, I will look for how I decide to accomplish my goal

yes no problem, accomplish your goal! only when will it be? Already the 2nd day from the forums I do not get out ... basically, most of the methods are old (still under android 2.x) or for the Chinese on MTK62xx.
Find the nvram core from the same device.
Simka working 100% she stood with a modem. I remember for sure, I caught the network before the firmware.
I did not know about the root.

Post has been editeddomen_2008 - 01.09.13, 21:36

I have already flashed my own time with 20 different firmware.
Like 3G did not fly away (if I return my native firmware).
Now I can’t figure out how to enable wifi on the new firmware ...
Says [wifi_pm]: No select wifi, please check your config !!
I understand ... I will go to 3G only after I set up wifi.

Oooh! Naonet, I found a topic about my little animal, I thought about changing to 971, judging by their branch)))
I have to sink iOS too, like normal, but retarding. Faced with such glitches sometimes falls off the flash drive mikrosd like the conductor sees it, but opens - and it's empty. With 3G is sometimes a problem, or gives an error message when you search a network, or says, they say, I schA roaming because Ineta not receive. Although I am of course in the home network. Yes, as the pan heats, especially in the case. It is convenient to take a hike, body metal, half an hour and you can surf the yaishenku fry. Heavy games like GTA MW are going well, well, about the performance can be Werke about 971 to read, the same thing.
Guys, I unfortunately are not in the tooth with my foot in the core and firmware development, and I can not help you here. Sorry, but all hope is on you. Well, there is another proposal to throw off xirtam to 972, let him fool firmware instead of 971))

hodjok,
Opened the topic of this topic of despair, because nobody wanted it, but WANT THE BEST :)
In firmware, too, is zero.
Now I have installed 9.72 firmware from 9.71
I made the touch and g-sensor work fine, sound and video seem to work ...
BUT, accordingly, any network things like wi-fi, 3G do not work
I dig in this direction ... maybe that will work.
Do you mean to reset xirtam to buy 9.72 so that you fool it?
Or maybe just ask him for help in the direction of where to look, where to dig?

ChuDoVisChe, Well, about xirtam was a joke) of course you can ask, but to test the firmware and scripts, he needs our tablet, which he does not have. So he can help if he can (if he wants) only with theory. I'll try to write to him.

Post has been editedhodjok - 02.09.13, 06:31

I wrote to him and some other comrades, who can and will help.

hodjok,
I also wrote to him in QMS

I bought such a daughter. The firmware 1.01 also slows down flipping.

can someone tell me how to replace the files in the system init.sun6i.rc?
I am changing, but after restarting old files are restored

Imel could not be restored (((3g does not plow.

gurus do not respond ... while stuck in place :)

Stock script.bin from our tablet:
explay_script.rar(4.25 KB)

Someone wrote that the axles are shifted and turned, so try:infa

Downloaded ChainFire 3D installed the driver ..... the tablet does not boot anymore ..... how to flash it now? Explay SQuad 9.72 3G

xirtam Thanks for responding)
ChuDoVisChe, buddy, now all hope is on you! I do not know how to dig in all this, but if it turns out, I’m ready to be a tester for new firmware. To learn now to reflash.

People how to restore imei after firmware?

xirtam
Thank you, I have already figured out with the rollover axes.
boot.fex.iso I learned how to unpack, pack
script.bin also learned to stuff in bootloader.fex.iso

Still to learn to thrust drivers in system.fex.iso
Do not tell me how?