TP-Link TL-WR741ND - Discussion | [wifirouter] Discussion, settings, problem solving
Subject: How to recover 741N, killed updating jffs2 over SquashFS?
Hello everybody! I would like to update the firmware on the router, but accidentally threw the image with the wrong file system (the SquashFS was, and threw JFFS2). The router reboots and more normally not turn on, turn on the power when all bulbs light up, faded out, then some time flashes gear and all the more, as I understand, nothing happens it tries to load and then catches the mistake and hangs. I tried to connect a cable to all ports, and nothing else. "
Tried different teams via telnet to achieve access to the web interface. But nothing worked. Of the latter, he did - to reset all settings to the default command mtd -r erase rootfs_data for jffs2.
Now, the power indicator lights and all ports. Icon system, wi-fi and padlock - no (
I understand only now soldered? Or are there other options? Since no longer connects to telnet. And the lights are on in the static mode and all.
Thanks in advance for the answer!
Hello everybody! I would like to update the firmware on the router, but accidentally threw the image with the wrong file system (the SquashFS was, and threw JFFS2). The router reboots and more normally not turn on, turn on the power when all bulbs light up, faded out, then some time flashes gear and all the more, as I understand, nothing happens it tries to load and then catches the mistake and hangs. I tried to connect a cable to all ports, and nothing else. "
Tried different teams via telnet to achieve access to the web interface. But nothing worked. Of the latter, he did - to reset all settings to the default command mtd -r erase rootfs_data for jffs2.
Now, the power indicator lights and all ports. Icon system, wi-fi and padlock - no (
I understand only now soldered? Or are there other options? Since no longer connects to telnet. And the lights are on in the static mode and all.
Thanks in advance for the answer!
serge-serafim firmwarehttp://proadminz.ru/vo...rov-tp-link-iz-dd-wrt/Program and instructions (do not forget to rename as in the descriptionhttp://proadminz.ru/vo...ki-tp-link-tl-wr842nd/Should help
virtual13, I tried different options through the tftpd - no result. Dully lit the above indicators and though kill.
When enabled, of course, defines the port where the cable is inserted - just 1c, and then light up on lamp + on all ports. And so it hangs
When enabled, of course, defines the port where the cable is inserted - just 1c, and then light up on lamp + on all ports. And so it hangs
through tftp Restores fresh loaders from tp link.
prior experimentation is necessary to put the latest firmware of-Bout .a then suffer.
and solderflash
and try to connect not only to lan but wan and since for example tp link740v4 connected to wan -during firmware and then in Lan.
MANUAL OPEN WRT
Turn off your router
Mount it in the settings of your network card a static IP in the range of 192.168.1.2 (make sure that the computer is connected to the first LAN port of the router)
Turn on the router
As soon begins to flash 'SYS' LED (signaling system boot), press and hold the button on the rear panel 'RESET' (you can also use 'QSS' button on the front panel 11)) until the LED 'SYS' flashes very quickly.
After that, you can open a telnet console to the address 192.168.1.1. Without a username and password.
Set the root password:
Dial: passwd root
enter twice the password: password
To activate the SSH connection through the console, type the following command:
install on the PC
winscp573setup.rar(5.4 MB)
run create a new connection with the SCP protocol
hostname:192.168.1.1
Username:root
password:password
skinte a folder TMP firmware without buta wr741nv1_en_3_11_7_up (100603) .bin rename tp link.bin
at the office site is the first firmware for your rivizii usually without buta size 3840k
run the command:
or if you want to open wrt the firmware openwrt-ar71xx-tl-wr741nd-v1-squashfs-factory.bin
firmware rollback through a web interfaceopen wrt
Firmware for rollbackDD-WRT
DD-WRT-2
=====================================================
If you have interesting to someone spouts events
right
breed
oru-boot_mod
Post has been edited-SunLion- - 07.08.15, 14:45
prior experimentation is necessary to put the latest firmware of-Bout .a then suffer.
and solderflash
and try to connect not only to lan but wan and since for example tp link740v4 connected to wan -during firmware and then in Lan.
MANUAL OPEN WRT
Turn off your router
Mount it in the settings of your network card a static IP in the range of 192.168.1.2 (make sure that the computer is connected to the first LAN port of the router)
Turn on the router
As soon begins to flash 'SYS' LED (signaling system boot), press and hold the button on the rear panel 'RESET' (you can also use 'QSS' button on the front panel 11)) until the LED 'SYS' flashes very quickly.
After that, you can open a telnet console to the address 192.168.1.1. Without a username and password.
Set the root password:
Dial: passwd root
enter twice the password: password
To activate the SSH connection through the console, type the following command:
/etc/init.d/dropbear start
install on the PC
winscp573setup.rar(5.4 MB)run create a new connection with the SCP protocol
 |
hostname:192.168.1.1
Username:root
password:password
skinte a folder TMP firmware without buta wr741nv1_en_3_11_7_up (100603) .bin rename tp link.bin
at the office site is the first firmware for your rivizii usually without buta size 3840k
run the command:
mtd -e firmware -r write / tmp / tp link.bin firmware
or if you want to open wrt the firmware openwrt-ar71xx-tl-wr741nd-v1-squashfs-factory.bin
 |
mtd -e firmware -r write /tmp/openwrt-ar71xx-tl-wr741nd-v1-squashfs-factory.bin firmware
firmware rollback through a web interfaceopen wrt
Firmware for rollbackDD-WRT
DD-WRT-2
=====================================================
If you have interesting to someone spouts events
right
breed
mod scrin
 |
 |
 |
|
 |
 |
 |
oru-boot_mod
u-boot_mod
2
 |
Post has been edited-SunLion- - 07.08.15, 14:45
Reason for editing: in the header
Hello, Is it worth it to change the standard firmware openwrt something to improve or not ???? And what are seen bugs on openwrt ????
DENiX123, I changed and I love I have is 14 version, bugs are only available from the web interface, supposedly it is impossible to remove the modules they lost but they did not disappear from the memory of the router and take up memory, so the same is true a couple of times dropped the default settings, as well as Useful firmware and very Advanced differ in the standard. And before setting off on a read. Page which binarnk as they are called there for the first 2 firmware Photo and the second for the upgrade version and do not confuse the file system of the router.
And after installing the firmware web interface place manually via a telnet.
Post has been editedVirus25418 - 06.08.15, 16:54
OPEN WRT firmware-good if properly set up -and not to put unnecessary packets to the router is weak.
I upgraded my RAM was added routers 32 MB was 64
and 841 put on Vleck 16MB to install packages without external fleshki.mozhno usb stick-but hands do not reach
Return the original firmware of routers TP-LINK izOPENWRT
http: //www.friedzombie...ink-stripped-firmware/
Post has been editedkestua - 07.08.15, 11:44
I upgraded my RAM was added routers 32 MB was 64
compatible chips
compatible chips
Samsung - K4H511638B
Samsung - K4H511638C
Samsung - K4H511638D
Samsung - K4H511638F
Hynix - HY5DU121622CTP
Infineon - HYB25D512160CE
Micron - MT46V32M16TG
Elpida - EDD5116ADTA
Elpida - EDD5116AFTA
Nanya - NT5DS32M16BS
Chip Statistics
The list of chip series that have been tested and should fit (without suffixes) according to the Western forums for upgrading WL500P:
Samsung K4H511638D
Hynix HY5DU121622CTP
Hynix HY5DU121622CLTP
Hynix HY5DU121622DTP
Hynix HY5DU121622DLTP
Micron MT46V32M16TG
Micron MT46V32M16TGZ
Nanya NT5DS32M16BS
infineon HYB25D512160BE
Elixir N2DS51216BT-6K
List of specific chips that have been tested on the wl500g.info forum:
K4H511638D-UCCC (purchased separately (not included in the module))
Samsung K4H511638B-TCB3
Samsung K4H511638D-UCB3
Hynix HY5DU121622CTP-J
Hynix HY5DU121622CTP-D43
Hynix HY5DU121622DTP-D43
Kingston K4H511638C-UCB3
ELPIDA D5116AFTA-5B-E
The list of specific modules whose chips were tested on the wl500g.info forum:
Memory: 512Mb SO-DIMM PC2700
Module: Samsung M470L6524BT0-CB3
[Chips]: Samsung K4H511638B-TCB3
Memory: 512Mb SO-DIMM PC2700 (ROHS)
Module: Samsung M470L6524DU0-CB3
[Chips]: Samsung K4H511638D-UCB3
Memory: 256Mb DIMM
Module: Samsung M368L3324BT
[Chips]: Samsung K4H511638B-TCB3
Memory: 256Mb SO-DIMM
Module: Samsung K4H511638BT0
[Chips]: Samsung K4H511638B-TCB3
Memory: 256Mb DIMM PC2700
Module: Hynix HYMD532646CP6J-J
[Chips]: Hynix HY5DU121622CTP-J
Memory: 256Mb DIMM PC3200
Module: Hynix HYMD532646CP6J-D43
[Chips]: Hynix HY5DU121622CTP-D43
Memory: 256Mb DIMM PC3200
Module: Hynix HYMD532646CP6J-D43
[Chips]: Hynix HY5DU121622DTP-D43
Memory: 512Mb DIMM PC2700
Module: Kingston KVR333X64SC25 / 512
[Chips]: Kingston K4H511638C-UCB3
Memory: 512Mb PC2700
Module: Kingston KVR400X64SC3A / 512
[Chips]: Hynix HY5DU121622CTP-D43
Memory: 256Mb SO-DIMM PC2700 (ROHS)
Module: Transend TS32MSD64V3M
[Chips]: ELPIDA D5116AFTA-5B-E
Module: Samsung M368L3324BT without a suffix
[Chips]: Samsung K4H511638B without a suffix
Module: Samsung K4H511638B without a suffix
[Chips]: Samsung K4H511638B without a suffix
Module: Samsung M470L6524BT
[Chips]: Samsung K4H511638B without a suffix
Memory: 512Mb PC2700
Module: Kingston KVR400X64SC3A / 512
[Chips]: Nanya NT5DS32M16BS
Memory: 256Mb PC2100 # 2700 #
Module: Kingston KVR400X64SC2.5A / 256
[Chips]: infineon HYB25D512160BE
Samsung - K4H511638B
Samsung - K4H511638C
Samsung - K4H511638D
Samsung - K4H511638F
Hynix - HY5DU121622CTP
Infineon - HYB25D512160CE
Micron - MT46V32M16TG
Elpida - EDD5116ADTA
Elpida - EDD5116AFTA
Nanya - NT5DS32M16BS
Chip Statistics
The list of chip series that have been tested and should fit (without suffixes) according to the Western forums for upgrading WL500P:
Samsung K4H511638D
Hynix HY5DU121622CTP
Hynix HY5DU121622CLTP
Hynix HY5DU121622DTP
Hynix HY5DU121622DLTP
Micron MT46V32M16TG
Micron MT46V32M16TGZ
Nanya NT5DS32M16BS
infineon HYB25D512160BE
Elixir N2DS51216BT-6K
List of specific chips that have been tested on the wl500g.info forum:
K4H511638D-UCCC (purchased separately (not included in the module))
Samsung K4H511638B-TCB3
Samsung K4H511638D-UCB3
Hynix HY5DU121622CTP-J
Hynix HY5DU121622CTP-D43
Hynix HY5DU121622DTP-D43
Kingston K4H511638C-UCB3
ELPIDA D5116AFTA-5B-E
The list of specific modules whose chips were tested on the wl500g.info forum:
Memory: 512Mb SO-DIMM PC2700
Module: Samsung M470L6524BT0-CB3
[Chips]: Samsung K4H511638B-TCB3
Memory: 512Mb SO-DIMM PC2700 (ROHS)
Module: Samsung M470L6524DU0-CB3
[Chips]: Samsung K4H511638D-UCB3
Memory: 256Mb DIMM
Module: Samsung M368L3324BT
[Chips]: Samsung K4H511638B-TCB3
Memory: 256Mb SO-DIMM
Module: Samsung K4H511638BT0
[Chips]: Samsung K4H511638B-TCB3
Memory: 256Mb DIMM PC2700
Module: Hynix HYMD532646CP6J-J
[Chips]: Hynix HY5DU121622CTP-J
Memory: 256Mb DIMM PC3200
Module: Hynix HYMD532646CP6J-D43
[Chips]: Hynix HY5DU121622CTP-D43
Memory: 256Mb DIMM PC3200
Module: Hynix HYMD532646CP6J-D43
[Chips]: Hynix HY5DU121622DTP-D43
Memory: 512Mb DIMM PC2700
Module: Kingston KVR333X64SC25 / 512
[Chips]: Kingston K4H511638C-UCB3
Memory: 512Mb PC2700
Module: Kingston KVR400X64SC3A / 512
[Chips]: Hynix HY5DU121622CTP-D43
Memory: 256Mb SO-DIMM PC2700 (ROHS)
Module: Transend TS32MSD64V3M
[Chips]: ELPIDA D5116AFTA-5B-E
Module: Samsung M368L3324BT without a suffix
[Chips]: Samsung K4H511638B without a suffix
Module: Samsung K4H511638B without a suffix
[Chips]: Samsung K4H511638B without a suffix
Module: Samsung M470L6524BT
[Chips]: Samsung K4H511638B without a suffix
Memory: 512Mb PC2700
Module: Kingston KVR400X64SC3A / 512
[Chips]: Nanya NT5DS32M16BS
Memory: 256Mb PC2100 # 2700 #
Module: Kingston KVR400X64SC2.5A / 256
[Chips]: infineon HYB25D512160BE
and 841 put on Vleck 16MB to install packages without external fleshki.mozhno usb stick-but hands do not reach
Return the original firmware of routers TP-LINK izOPENWRT
http: //www.friedzombie...ink-stripped-firmware/
Post has been editedkestua - 07.08.15, 11:44
kestua Well, not all the aces and chips soldered hairdryer differently alas. And you do not know which team to ssh packets completely removes tried pyurom Necati thought delet too. A description on the package does not have a Russian perevodchki crooked transferred.Maybe someone will be useful infa.
I have a 2 router 741nd from Kyivstar, one version 4.20 drougoy 4.24.
On a standard firmware COP from the TP or native-link limp recoil velocity in a single-threaded mode, the router is clocked at return jumps from 40 to 60 megabits that were unacceptable. Admission was almost stable in single-threaded mode, but sometimes it is sensitive to "float". Multithreaded stokovvye issued maksimlnuyu stitching speed.
Routers were stitched OpenWrt version of "Barrier Breaker 14.07". The situation znachitelbno improved efficiency in one flow was in most at the maximum speed and to be stable but sometimes "floating" with a 100 megabits to 95.
Settings should OpenWrt firmware for maximum performance, the removal from it of all unnecessary packages situaitsiyu not changed. Firmware version of the 15th gave tezhe results.
Then he flashed the very first and the oldest (combined previous) 2013 firmware that supports this version of the router - Attitude Adjustment 12.09 and it is even on default settings, flies without subsidence in single-threaded mode, return and reception. In addition, it takes up very little space in the flash memory of the router for some reason, and that obviously affects its performance. The old version of LUCI shell out of it, though less beautiful than the new but all the necessary functions have to tomuzhe if I am not mistaken LUCI Mona straight from roshivki upgrade to the new version, I just did not this zamorachivatsya, configured via SSH stopped uhttpd which is responsible for the web disabled-interface and its autostart.
I have a 2 router 741nd from Kyivstar, one version 4.20 drougoy 4.24.
On a standard firmware COP from the TP or native-link limp recoil velocity in a single-threaded mode, the router is clocked at return jumps from 40 to 60 megabits that were unacceptable. Admission was almost stable in single-threaded mode, but sometimes it is sensitive to "float". Multithreaded stokovvye issued maksimlnuyu stitching speed.
Routers were stitched OpenWrt version of "Barrier Breaker 14.07". The situation znachitelbno improved efficiency in one flow was in most at the maximum speed and to be stable but sometimes "floating" with a 100 megabits to 95.
Settings should OpenWrt firmware for maximum performance, the removal from it of all unnecessary packages situaitsiyu not changed. Firmware version of the 15th gave tezhe results.
Then he flashed the very first and the oldest (combined previous) 2013 firmware that supports this version of the router - Attitude Adjustment 12.09 and it is even on default settings, flies without subsidence in single-threaded mode, return and reception. In addition, it takes up very little space in the flash memory of the router for some reason, and that obviously affects its performance. The old version of LUCI shell out of it, though less beautiful than the new but all the necessary functions have to tomuzhe if I am not mistaken LUCI Mona straight from roshivki upgrade to the new version, I just did not this zamorachivatsya, configured via SSH stopped uhttpd which is responsible for the web disabled-interface and its autostart.
Tell me how to change the mac-address, the problem is that in the "network" I have only 2 points and LAN Local Area Network, and Firmware upgrade item there are no (((
Post has been editedGriffi - 08.09.15, 21:40
Post has been editedGriffi - 08.09.15, 21:40
Guys, I need help.
Deleted lan interface on the TP-Link TW741nd by OpenWRT, right now I can not go to the router. all the lamps are lit as it should.
returning control or can be reset to factory settings?
Deleted lan interface on the TP-Link TW741nd by OpenWRT, right now I can not go to the router. all the lamps are lit as it should.
returning control or can be reset to factory settings?
Rasl2009, reset to factory settings in OpenWRT is conducted as follows:
1. disable the router and WAN-wire
2. connect a patch cable to the LAN1
3. Includes Router
4. at the time of the activity SYS-LED, quickly click QSS
5. SYS-LED will begin to flash rapidly, indicating the transition to the FailSafe mode. If not, go back to step 1.
Open PuTTY. Host Name: 192.168.1.1, port 23, Protocol: Telnet. Click connect. Enter the current username / password.
At the command prompt, type the following: mtd -r erase rootfs_data
The command to reset to factory defaults
We do not touch anything, expect to complete all the operations and the appearance of phrases Rebooting ...
Hard Reset procedure completed
The router will reboot and now PuTTY window can be closed.
Copy-paste from the Runet, nepomnyu addresses but notes in the file is stored.
Comrades!
Put OpenWRT, I can not understand how to use LuCI.
You need to change the config nginx.
Where to look at how to use? What kind of an article or any howto tell me?
Put OpenWRT, I can not understand how to use LuCI.
You need to change the config nginx.
Where to look at how to use? What kind of an article or any howto tell me?
OpenWRT 10.03.1 do not want to give up the connection 65mbs. It does not work 40MHz range, although Adapting selected "from below 40MHz"
Who knows, tell me where to dig?
Who knows, tell me where to dig?
Carried OpenWRT put DD-wrt.
I caught a bug - does not go into the web face with chromium, trying to go to LuCI which no longer exists. With Mazilu connects.
Now I can not connect via SSH. Telnet host connects.
You need to run Nginx.
What to do? : D
I caught a bug - does not go into the web face with chromium, trying to go to LuCI which no longer exists. With Mazilu connects.
Now I can not connect via SSH. Telnet host connects.
You need to run Nginx.
What to do? : D
Using and installing DD-WRT
clean cookie in the browser
Enable ssh settings and set the password
Post has been editedkestua - 15.09.15, 21:22
clean cookie in the browser
Enable ssh settings and set the password
Post has been editedkestua - 15.09.15, 21:22
unico555, to each his own .
dd wrt firmware great for casual users (only wifi)
and if you need to tie a webcam or zhostky or put the server on the router -So we can not do without the Open wrt
kestua , Cookies are first of all cleaned, it did not help strangely.
SSH enabled, it does not work. Deducted that this firmware bug.
Sew the other version does not work dhcp.
Stock returned.
Posted on 15/09/2015, 21:34:
kestua @ 16.09.15, 00:25
put the server on the router -So we can not do without the Open wrt
What DDWRT will not work?
I then just have to run a proxy server Nginx.
Transparent Web Proxy
the latest firmware TP-LINK741
Post has been editedkestua - 17.09.15, 13:38
To run SSH in the firmware DD-WRT-uncheck tel net
 |
the latest firmware TP-LINK741
Post has been editedkestua - 17.09.15, 13:38
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement