[X]Assistant

[sh_034]

D-Link DIR-632 - Discussion

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the "Complaint" button under the message where you were helped, and write a thank you.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.
  

A photo:

Description:

Description:
The perfect solution for building a home network
Connecting the D-Link DIR-632 wireless router to a cable or DSL modem provides shared high-speed access to the Internet, game consoles, and multimedia devices. The DIR-632 802.11n router provides up to 14 times more speed and a 6-fold increase in range1, compared to 802.11g, while remaining backward compatible with 802.11g and 802.11b devices. With two external antennas, this router provides a high degree of wireless coverage for a large home and office. In addition, the built-in 8-port 10/100 Fast Ethernet switch provides wired devices for fast data transfer and online gaming without delay.

Advanced Wireless Security
The DIR-632 router supports security features to prevent unauthorized access over a wireless network or from the Internet. Support for WEP, WPA and WPA2 standards provides the optimal choice of data encryption. In addition, the router supports dual firewall (SPI and NAT) to prevent potential attacks from the Internet.

IPv6 Ready
The DIR-632 facilitates the transition from IPv4 to IPv6. The router was awarded the IPv6 Ready logo, which means not only its support for IPv6, but also its compatibility with other manufacturers' IPv6 equipment. This allows you to use a 128-bit addressing system and connect directly to a user anywhere in the world using a unique IP address. Thanks to the dual-stack architecture, the DIR-632 can simultaneously support routing for networks based on IPv4 and IPv6, which ensures complete compatibility of the device.

Characteristic

Standards
• IEEE 802.11n • IEEE 802.11g • IEEE 802.11b • IEEE 802.3u • IEEE 802.3x
Device interfaces
• 1 WAN (RJ-45) • 8 LAN (RJ-45) • 1 USB 2.0 Antennas Two external dipole antennas with 2dBi gain
Security
• 64/128-bit WEP encryption • WPA and WPA2 (Wi-Fi Protected Access) Advanced firewall features • Network Address Translation (NAT) • Stateful Packet Inspection (SPI) • VPN Pass-through / Multi-sessions / PPTP / L2TP / IPSec
Minimum system requirements • Computer with support: + Windows®, Macintosh, or Linux Windows®, Macintosh, or Linux + CD-ROM + Ethernet Adapter
Browser requirements: + Internet Explorer 6 or higher, Firefox 3.0 or higher, Safari 3.0 or higher, Google Chrome 2.0 or higher Wireless connection speed
• 802.11b: 11, 5.5, 2, and 1 Mbps • 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps • 802.11n: 6.5 ~ 300 Mbps / s Receiver sensitivity
• 802.11b (typical with PER = 8%): -83dBm for 11 Mbps -89dBm for 2 Mbps
• 802.11g (typical with PER = 10% for a 1000-byte packet): -82dBm for 6 Mbps -81dBm for 9 Mbps -79dBm for 12 Mbps -77dBm for 18 Mbps -74dBm for 24 Mbps / s -70dBm for 36 Mbit / s -66dBm for 48 Mbit / s -65dBm for 54 Mbit / s
• 802.11n (20 MHz) -82dBm with BPSK, coding rate 1/2 (MCS-0) -79dBm with QPSK, coding rate 1/2 (MCS-1) -77dBm with QPSK, coding rate 3/4 (MCS- 2) -74dBm at 16-QAM, coding rate 1/2 (MCS-3) -70dBm at 16-QAM, coding rate 3/4 (MCS-4) -66dBm at 64-QAM, coding rate 2/3 (MCS -5) -65dBm with 64-QAM, coding rate 3/4 (MCS-6) -64dBm with 64-QAM, coding rate 5/6 (MCS-7)
• 802.11n (40 MHz) -79dBm with BPSK, coding rate 1/2 (MCS-8) ​​-76dBm with QPSK, coding rate 1/2 (MCS-9) -74dBm with QPSK, coding rate 3/4 (MCS- 10) -71dBm at 16-QAM, coding rate 1/2 (MCS-11) -67dBm at 16-QAM, coding rate 3/4 (MCS-12) -63dBm at 64-QAM, coding rate 2/3 (MCS -13) -62dBm with 64-QAM, coding rate 3/4 (MCS-14) -61dBm with 64-QAM, coding rate 5/6 (MCS-15) Transmitter output power • 802.11b + 18dBm +/- 1,5dB for 11.5.5, 2 and 1 Mbps at room temperature 25 С
• 802.11g + 17dBm +/- 1,5dB for 6 - 18 Mbit / s at room temperature 25 С + 16dBm +/- 1,5dB for 24 - 36 Mbit / s at room temperature 25 С + 14dBm +/- 1,5dB for 48 - 54 Mbit / s at room temperature 25 С • 802.11n + 16dBm +/- 1,5dB for MCS - 0 ~ 4, MCS 8 ~ 12 at room temperature 25 С + 14,5dBm +/- 1,5dB for MCS - 5, 13 at room temperature 25 С + 12,5dBm +/- 1,5dB for MCS - 6, 14 at room temperature 25 С + 8.5 dBm +/- 1,5dB for MCS - 7, 15 at room temperature 25 С + 13dBm +/- 2dB for 48 and 54 Mbit / s at room temperature 25 C and 3.3 V Modulation schemes CCK, OFDM Installation
• Installation Wizard
• Desktop or Wall Mounted Indicators • Power • WPS • Internet • Wireless • USB • Ethernet Physical Parameters
Power 5 V DC 2.5 A Power consumption Max. 10 V Dimensions 231 x 152 x 34 mm Weight 407 g Operating temperature 0 ° to 40 ° C Storage temperature 0 to 65 ° C Working humidity 0 to 95% (non-condensing) Storage humidity 5 to 95% (non-condensing ) Certificates • FCC • CE • IC • C-Tick • NCC • IPv6 Ready • Wi-Fi b / g / n -WPS
• The device supports Windows 7 1 The maximum wireless data rate is defined by the IEEE 802.11 b / g / n standard. The data transfer rate may differ significantly from the wireless connection speed. The conditions in which the network operates as well as environmental factors, including the volume of network traffic, building materials and structures, and the network overhead, can reduce actual throughput. Environmental factors may influence the range of a wireless network. 2 The software supplied is not compatible with MAC. All baud rate data are for comparison purposes only. Device specifications, dimensions and appearance are subject to change without notice, and the appearance of the device may differ from that shown here. For more information about D-Link Green technology, please visit the site.

Useful links:

firmware method
D-Link DIR 632 Recovery
Post on the transition to the latest version of DD-WRT

off site

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedstp101 - 16.11.18, 15:13

Reason for editing: Post on the transition to the latest version of DD-WRT

[aksimail]

Does anyone have patches for more recent versions?
to build openwrt

[victor_as]

Who has a working ddwr-l for this model? and the original firmware v.1.0.0, still ran into a problem through the cable does not connect the TV, according to the favle all the rules

[John_White]

victor_as,
dd-wrt
Old firmware

[victor_as]

I installed dd-wrt on the link, the binding is on the Mac, everything is set up, there is internet everything is ok, but the problem I encountered does not go to the web of the router, 192.168.1.1 and 0.1 do not work, after the reset it goes, how to go to the router?

[John_White]

victor_as,
Not quite clear. Reset - configure by the new one - remember the router IP address.

[victor_as]

John_White @ 02.26.2015, 14:05

Insert nick

I reset, in the settings I write the address 192.168.1.1, but when the Internet appears, I cannot go to the router

Attached images

[victor_as]

In general, something is not clear when I disconnect the Internet cable, then it comes to the address 192.168.1.1, who knows what could be the reason?

[victor_as]

My problem solved everything, everything works, it remains only to configure udpprx for this model

[victor_as]

good people help with the installation of udp-proxy, I tried a lot of commands, nothing helps

[BlackMirror2014]

Has anyone managed to compile the firmware from the sources of the barrier_breaker / 14.07 or later branch?
After applying the patch, the profile DIR-632 does not appear

Post has been editedRambo2008 - 02.03.15, 16:05

[vahe-91]

How does wi-fi work in dd-wrt? better than the factory firmware?

[-SunLion-]

vahe-91,
On dd-wrt, the router as a whole works better and there is access to more settings.

[vahe-91]

-SunLion-,
And the maximum speed for wi-fi is how much? I do not go up to more than 30 Mbps at the factory

Post has been editedvahe-91 - 07.03.15, 11:28

[-SunLion-]

vahe-91,
Not the fact that it is the fault of the router, the WiFi network is the router + clients, and it works on the weakest client. What is written 300 mbps is marketing, the maximum in theory is 90-100 mbps.

[BlackMirror2014]

Has anyone managed to connect a Yota LTE modem to the DIR-632?

[John_White]

Rambo2008,
The firmware version of the router?

[BlackMirror2014]

I tried to flash:
1) OpenWRT versions - firmware taken, see messages above
"13.05.2014, 15:26
I post only 2 firmware, but if someone can use Google, they will find the third one :) Attached file firmware.zip (9,08 MB) "
Could not find repository for this version of OpenWRT to install packages
kmod-usb-net, kmod-usb-net-asix, kmod-usb-net-cdc-ether, kmod-usb-net-rndis, kmod-usb2, kmod-usb-ohci

2) DD-WRT
ftp://ftp.dd-wrt.com/o…-r25697/dlink-dir632a/

In both cases, the ping failed

[victor_as]

who knows if it is possible to install the firmware from Zyxel Keenetic for this router, if so, which algorithm and firmware can be? very necessary, thanks

[Roman2377]

I did everything according to the instructions onhttp://dd-wrt.com/wiki/index.php/D-Link_DIR-632.As a result, in addition to the message about "incorrect firmware" received nothing. can someone tell me how to put the firmware. As you do not want to download via "reset".

Attached images

[John_White]

victor_as,
He is atheros. Kinetics for ralinkov.