GoClever TAB R76.1 / 76.2 - Firmware (OS 4.1.1)
GoClever TAB R76.1, GoClever TAB 76.2
Description | Discussion пїЅ | FirmwareпїЅ







In order to avoid errors when flashing, I strongly advise everyone to disable antiviruses.

"Dear members of the forum, if they helped you with advice, and the proposed option works, inform the curator, this will help you in filling the cap with useful information, which, otherwise, you will have to look for the whole topic!"

Theme rules:
1. To avoid unnecessary questions and unnecessary littering of the topic, a huge request to you - carefully read the header, since it is here that you will most likely find the answers to your questions.
2. Asking a question - try to articulate as precisely as possible what you would like to achieve.
3. Questions that are not relevant to the topic will be deleted.

Reward system
4. If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant.
5. The reputation of other participants can be influenced by any user who has collected 15 useful posts. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the "Complaint" button.

Post has been editedRoman36Liman - 06.08.16, 16:40

Install the terminal, for example from the market, and enter

adb shellpress enter / enter
cat / proc / mtd /enter / water

should leappartition table
For example

# # cat / proc / mtd
# dev: size erasesize name
# mtd0: 00500000 00020000 "boot"
# mtd1: 00500000 00020000 "recovery"
# mtd2: 00140000 00020000 "misc"
# mtd3: 00060000 00020000 "splash"
# mtd4: 0aa00000 00020000 "system"
# mtd5: 05d00000 00020000 "cache"
# mtd6: 0a6a0000 00020000 "userdata"
# mtd7: 01400000 00020000 "cust"

(you may have a different one!)

Next, enter the command

cat / dev / mtd / mtd<numeral> >>/ sdcard /<form>.imgpress enter / enter

Where<numeral>this is a figure frompartition tables
BUT<form>this is the name that the created image will be called

When you entered the last command, we don’t close the terminal application, but click on the house or just don’t exit! To check whether the process is completed or not, we go to the file manager, find our img image (at the root of sdcard), wait until its size increases to the maximum, that is, we exit the file. Manager-we-go-go-go-go-go- we go in, while checking out our image that has almost come out of the bottom. when it grows and will not continue to continue - then everything is ready!

You can extract the following image.
Repeat action for everyonenumbers(save all the images)

You post all saved images here

WARNING! If kernel is in the linespartition tablesno, then it lies in Boot! And the kernel is the kernel! That is, the kernel can be in boot, then separately!


Post has been editedmaster_lie - 10.09.13, 10:19

Do not forget, In case of failure of the device, the author of this message, forum users are not responsible! All actions at your own risk!

First of all, I would like to thank the forum participants for their help in removing the dump and getting rootmaster_lie and filaxtov

Changes and additions:
- Removed all unnecessary and added programs:
- Superuser (superuser rights)
- ES Explorer (file manager with very large functionality)



Installation Method:
- Download:

• firmware downloadGoClever TAB R76.1 withGoogleDrive
  
• firmware downloadGoClever TAB R76.1 withI.Disk
  

- remove the memory card from the tablet, just connect the tablet to the computer and save all the necessary files to a computer or hard disk, since after the firmware all data on the tablet will be deleted.
- run RKBatchTool 1.5 (in the topic header or available in the archive with the firmware)
- select the file with the firmware, after unpacking the downloaded archive and clickRestore or Restore depending on what language your program is in.
- the first download can last up to five minutes, when the tablet is loaded, it is worth waiting 5 minutes more, as the system is setting up
- after loading, a message will be sent out about the need to format the internal memory;
- rejoice firmware: dancer:

It is advisable to use a memory card grade 10.
When returning to stock firmware, you will also need to use the button "Restore " ( Restore ), because when using this method, partitioning and formatting of sections is performed.

Restoring backups from other firmware is not recommended. Only you can restore the program, everything else can lead to the inoperability of the firmware.

Post has been editedmaster_lie - 28.08.13, 20:33

CommonwealthAndroTab released a new version of CWM Recovery, which I present to you. Now suitable for any firmware, both for stock and for purified.

Installation method
1. Download the archive with the recovery for the tablet:

For stock and for modified for:

• GoClever R76.1 пїЅпїЅпїЅ R76_1_CWMRecovery_6.0.3.1.rar (4.82 MB)
  GoClever R76.2 пїЅпїЅпїЅ R76_2_CWMRecovery_6.0.3.1.zip (11.66 MB)
  
  

2. We enter the tablet into the firmware mode by the method described below under the spoiler and run RK29update.exe (located in the archive with the recovery). The program is set up and there is nothing to choose, and after the message appears in the bottom of the Found RKAndroid rock usb (provided that all the drivers are installed), in the program click on the Flash ROM and wait for the tablet to restart.
If everything went well then boot into recovery and you can create a backup and install mods.
It will be possible to enter the recovery mode on the modified firmware from the extended menu on the power button.


Do not forget, In the event of a device failure, neither I nor the administration and users of the forum are liable! All actions at your own risk!

Post has been editedmaster_lie - 08.09.13, 17:20

1. Install CWM and through it an archive with superuser, provided that you have stock firmware (not modified). All modified firmware already have root.
SuperSU-v1.60.zip(1.15 MB)
Constantly fresh version can be downloaded from here.xda-developers(for SuperSU)

Install zip files in CWM (Clockworkmod recovery)
Installation method:
We copy the archive from xxxxxxx.zip to the tablet’s memory (you can also use a memory card, but then you will need to choose a girlfriend in the menu.
We enter the recovery mode and select
1. step: »» »"install zip from sdcard"
2. step: »» »
- if the internal memory is "choose zip from sdcard"
- if external (i.e. sdcard) - "choose zip from external sdcard"
3. step: »» »select the downloaded archive and click on the power button and confirm the installation.
After a successful installation, restart the tablet and use

Or downloadSuperuser-3.1.3-arm-signed.zip(1.26 MB)
and also install it through CWM (CklockWorkMod Recovery - custom recovery). The principle of operation of the programs is the same, the only thing in the last package is the su binary that allows you to work in adb without any permission requests.
Superuser(always fresh)

PS: Modified firmware already has root and there is no need to install it.

Post has been editedmaster_lie - 07.09.13, 15:29

The firmware does not swing completely, it constantly starts to swing again.
If there is an opportunity to fill in with a mirror I will be grateful.

And comradesaynet all too say thank you. He was not afraid to give his tablet in our hands (mine and master_lie on a rather dubious experiment with a very controversial chance of success. But the result was worth it: we have a root, dumps and custom for the tablet.
P.S. The tablet was inoperable while picking about 4 days.

Post has been editedfilaxtov - 28.08.13, 18:06

I didn’t go there. From executables there is only RKAndroidToll.exe (located in the archive with recovery)

: Thank_you: This was a typo, as they tried to try with many programs of flash drivers. In the message from the recovery edited with RKAndroidTool.exe on RK29update.exe. You need to use this flash driver.

Everything is swinging fine, just checked, try disabling the antivirus ...

I wanted to flash the tablet, everything seemed to be normal. At the end I wrote a loading error. as a result of a corpse, what now can anyone do?

added at 19:40
But no, everything worked out.

Post has been editedmaster_lie - 30.08.13, 19:27

Problema nemogu perezagruzit s pomochju Reboot_bootloader.bat.
Podkliuchil planshetku v "USB debugging", Windows 7 x64 napravil iskart draivera v archiv "adb and tools", prinial kak device s imenem "% CompositeAdbInterface" (USB / VID_2207 & PID_0006).
Startuju Reboot_bootloader.bat, o tam:

* daemon not running. starting it now on port 5037 *
* daemon started successfully *

Bolshe nichevo nepraischodit, planshetka neperezagruzhajetsa.
Jest kokije by misli v chiom zadierzhka?



Post has been editedmaster_lie - 01.09.13, 13:12

GlottisLT,
Use the archiveandroid.rar(708 bytes)
Unpacking which you will seeIn the event that you do not need to show hidden files in the system settings, then maybe in the unpacked folder you will see only one Copy.bat. It doesn’t matter. Just click it, but the tablet should be disconnected from the computer and after you have done Copy with the batch file, you can connect the tablet with USB debugging enabled and use Rebot_bootloader.bat.

Or use this:Simplified installation of ADB under RK2928 for Windows

Post has been editedmaster_lie - 01.09.13, 18:44

We constantly notice difficulties with users installing drivers for Rockchip-based tablets. In this regard, it was decided to create a package for simplified installation of drivers and adb.

Instructions for use:
Download the archiveADBandTools.rar(8.71 MB)
or withmirrors
Unpack and run ADBandTools.exe: Next, see the screenshotsThe language of the installer can be chosen in both English and Russian and German.



Post has been editedmaster_lie - 19.10.13, 20:13

Thank you very much for ADBandTools.rar, it helped me insert a normal driver and everything plowed like clockwork!
You need ADBandTools.rar to insert into the header.

People advise working firmware with root for RK2928

shagdi1980777,
The firmware is currently the only one and it is already with the root, see the topic header or in the second message.

My computer sees the tablet as a USB flash drive, but Rockchip Batch Tool v1.6 does not see the connected device. What to do in this option?

Mara Mara
Go to the settings of the tablet, there you can find enable USB debugging and connect the cable to the computer. When the system reports that a new device is found, you specify the folder that you got after using the package fromGoClever TAB R76. - Firmware (OS OS Android 4.1.1) (Post # 24721313). In your dispatcher, when the drivers are installed correctly, something like Android .... Devise will appear. After that, you launch the shortcut on the desktop "Reboot Bootloader" and the tablet will boot into firmware mode (black screen). Run the flasher and then follow the instructions.

I switched to usb debugging mode. But the indicator does not light

Mara Mara
Indicator of what. You can detail all your actions, but unfortunately all of our psychics are on long-term vacation, and of your two rents it’s not clear what you did and what didn’t.