: skull:What can not be done when flashing the phone : skull:
Amendment to all the instructions for the firmware that you have read or will read: Sewing preloader and dsp_bl is necessary only in case of raising a brick! In all other regular updates and flashing, DO NOT check these boxes in FlashTool and DO NOT enable formatting! You can have problems that you can’t handle at home or it will be difficult to do. Mindlessly flashing these sections is an absolutely useless and very risky task, especially on the MT6575 and MT6577 platforms link to the original post of this warning more pictures1.Unzip the archive.
2. Preparation of the phone ...
!!! MANDATORY! WE CHARGE THE BATTERY AT LEAST UP TO 50% !!! 2.1.
Turn off the phone2.2.
distort the battery2.3.connect the cable
a new MT65XX Preloader device should appear and ask for a driver
2.4.install the driver
Explay POLO Driver.exe(11.21 MB)
The device will disappear, a charging screen appears.
At this training is over.
disconnect the phone from the computer
3.Preparation of Flashtool.
3.1. run flashtool
3.2. Click on the Scatter-loading button (in the picture under number 1.) and select the file MT6577_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc_РМТ.txt (if it didn’t work with the first one)
3.3. a list for the firmware appears
all checkmarks .
Check the box just opposite see picture, what is highlighted
green That RED, especially !! top !! two points - DO NOT TOUCH (must be empty) 4. Actually firmware.
4.1. Disconnect the phone from the cable (if connected),
4.2. turn off the phone
(remove the battery)4.3. click in flashtool button
download (she is at number 2 in the picture)
(a warning window appears: answer yes)
4.4. Connect the phone to the cable
AND insert akb The firmware process will begin, wait, at the end flashtool will draw
green circle : D
Disconnect the cable,
insert batteryturn on the phone.