[X]Assistant

[Dvemer89]

DiscussionJXD S5110b
ExeQ Ray 2, Smaggi Aio Smarti Dual Core, DNS Phorcys, TurboGames Duo, Soundtronix warrior
Description| Discussion пїЅ| Firmware пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications and photos

Color: white, black
Dimensions:
- Length: 195mm
- Width: 86.6mm,
-Height: 17.0mm,
- Mass: 232g
RAM Capacity: 1GB DDR3
ROM capacity: 8GB
Processor: Amlogic MX-S Dual core 1.5GHz (CPU: cortex A9, GPU: ARM mali 400 mp2)
OS: Android 4.1
Display: 5 inches, capacitive, 800 * 480 px resolution, multi-touch with 5 dots
Additional sensors: 3 Axis G-sensor
Communications: Wi-Fi (802.11 b / g / n)
Games: Game center X, N64, PS1, GBA, MD, NES, Android games, Touch games, Gravity games
Camera: photo / video 0.3 mrh
Video: RMVB, AVI, MPEG-4, ASP, DIVX, WMV, F4V, FLV, etc.
Audio: MP3, WMA, FLAC, OGG, etc.
Battery: lithium-polymer battery with a capacity of 2200 mAh
Connectors:
-USB2.0 (Support OTG: keyboard, mouse, 3G modem)
-2x3.5mm headphone jack
-Micro TF card slot, up to 64GB
-mini HDMI
- Connector for network charging
Complete set: game console, network adapter (5V, 2A), earphones, OTG cable, USB cable, instruction, warranty card

Video device reviews

http://www.youtube.com/watch?v=i9Hz4y9bXpA
http://www.youtube.com/watch?v=R3dIaS_vELE
Overview of the box
Testing sticks
Console analysis
JXd s5110B mapping nintendo64 in skelrom
JXD s5110B Mapping PSX with dual analogs in Skelrom

Useful

Firmware XSample-Skelerom 1.0
Update XSample-Skelrom to version 1.5
disassembling device
(official site)
Official firmware
(under the Russian brand)

Games, emulators.

GTA III on JXD S5110b
RealRacing 3 On JXD S5110b [Directional Button]
RealRacing 3 On JXD S5110b [Gravity Tilting]
JXDS5110B Modern Combat 4 (Firmware Stock)
JXD S5110B Dead Trigger - Dual Joystick Key Mapping
Shadowgun with HDMI output
JXD s5110B dual core Arcade Games
JXD S5110B dual core PSx emulation and Nintendo 64

Case

in postfrom uv Sevenven04
in postfrom uv yubei65

Replacing the internal battery

Maximum battery thickness 5.2 mm
With a thickness of 6 mm, the latch stops holding, the board bends, the 8 mm thick battery does not allow the lid to close
Dimensions of a native battery 95 * 55 mm, capacity 2100 mAha photofrom uv Dvemer89

Batteryinstalled by u. jubei65
stated3600 mAh, 96 * 64 * 5 mm, 67 g, actual capacity unknown, games from 100 to 10% 3 hours

5000 mah, 2 hours of play with wifi 100-61%

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedDyuss - 20.08.16, 02:58

Reason for editing: Updating headers

[Pearl]

M

Moving to Chinese devices

[Dvemer89]

Taki theme was created;)

I welcome all users of this device and immediately ask who uses what firmware?
I sit while on the drain, everything seems to be working, and also plans to replace the battery with a more capacious one, for 4000 mAh for example.

[Barkas2085]

I'm sitting on Custom firmware for JXD S5110B XSample-Skelrom 1.0.
Link to firmware:

XSample-Skelerom 1.0 download

Installation Instructions

Installation is carried out using ClockWork Recovery for s5110B, included in the attached archive. Just unpack the contents into the root of the microSD card.

Turn on the device with the volume up button pressed to enter the ClockWork Recovery mode. If you want, you can make a backup of the installed system. To navigate the menu, use the D-PAD to select - the Start button.

Required points:

Wipe data - Yes;
Wipe cache - Yes;
Advanced - Wipe Dalvik cache - Yes.
Now select apply update from sdcard and specify the XSAMPLE-Skelrom.zip file, reload the console after installing the update.

Information about SWAP ON and SWAP OFF (original)

And remember ALL WHAT YOU DO, YOU DO AT YOUR OWN RISK
You can add to the headerI'm also thinking about the battery, but now there is no time.

Post has been editedPe @ rl $ - 28.08.13, 10:39

[Demanih]

A little useful on the device, it may come in handy (you can add it to the header):

useful links
disassembling device
(official site)
Official firmware
(under the Russian brand)

Reviews and Tests
Overview of the box
Testing sticks
Console analysis
JXd s5110B mapping nintendo64 in skelrom
JXD s5110B Mapping PSX with dual analogs in Skelrom

Games, emulators.
GTA III on JXD S5110b
RealRacing 3 On JXD S5110b [Directional Button]
RealRacing 3 On JXD S5110b [Gravity Tilting]
JXDS5110B Modern Combat 4 (Firmware Stock)
JXD S5110B Dead Trigger - Dual Joystick Key Mapping
Shadowgun with HDMI output
JXD s5110B dual core Arcade Games
JXD S5110B dual core PSx emulation and Nintendo 64

[Dvemer89]

Demanih

As for the video with GTA 3, I watched it, but I didn’t understand how it set the maximum settings or what kind of special cache I downloaded, I set the GTA, the console itself downloaded the cache, but neither the headlights nor the beautiful ones were there, downloaded another cache (from some samsung masthead), all the same, no lighting, no glare, all simple, how to configure?

Post has been editedDvemer89 - 13.08.13, 14:52

[Demanih]

By firmware.

First was the original:
Kernel Version: 3.0.8
Build Number: S5110b-01-V2.2.2-20130523

tests:
3DMARK ice Storm score 2098
Epic Citadel Average FPS: 42.2 Resolution: 800x432 High Quality
Epic Citadel Average FPS: 40.8 Resolution: 800x480 High Quality

In it, when watching a video with a hardware codec, the sound periodically made noise.
Games went well (the ones that watched)
Emulators slowed down the sound a bit (n64oid, RetroArch).
When launching, cpu-z constantly showed that one core was working (possibly a program bug)
In sleep mode (screen off) almost did not discharge the battery.


Install the firmware from the official site:
Kernel Version: 3.0.8
Build Number: S5110b-01-V2.2.5-20130625

I did not notice any changes.


Install the firmware from SKelrom:
Kernel Version: 3.0.50
Build Number: S5110b-SKelrom-v1.0-JXDs5110B-20130611

tests:
3DMARK ice Storm score 2147
Epic Citadel Average FPS: 43.6 Resolution: 800x432 High Quality
Epic Citadel Average FPS: 43.4 Resolution: 800x480 High Quality

Here is the Russian description of the firmware.
The sound in the video corrected.
The games are going well.
Emulators in my opinion have ceased to slow down (n64oid, RetroArch).
When you run cpu-z it shows that there are two cores running.
In sleep mode (screen off), the battery is strongly discharged (better off completely).

In general, I stopped at the SKelrom firmware, in my opinion, the pluses overlap the minuses.

[Demanih]

Dvemer89 @ 08/13/2013, 15:51

As for the video with GTA 3, I watched it, but I didn’t understand how it set the maximum settings or what kind of special cache I downloaded, I set the GTA, the console itself downloaded the cache, but neither the headlights nor the beautiful ones were there, downloaded another cache (from some samsung masthead), all the same, no lighting, no glare, all simple, how to configure?

GTA 3 itself did not install, so I will not say for sure, but as an option to put the firmware from SKelrom, there, besides everything else, the device is identified as Samsung GT-I9100 Galaxy S II for maximum compatibility with games.

[Dvemer89]

Demanih

That's the way about the fact that eating a battery when the display is turned off, I wanted to ask, is this due to the fact that in the firmware from the sclerton perhaps the percentage accelerates?

As for the prots, everywhere, as always, an overestimated number is written, 1.5 GHz, 1.3 GHz is written to the antitu, by the way, it also gives 10228 points to our device :)

[Demanih]

[email protected], 09:23

That's the way about the fact that eating a battery when the display is turned off, I wanted to ask, is this due to the fact that in the firmware from the sclerton perhaps the percentage accelerates? As for the prots, everywhere, as always, an overestimated number is written, 1.5 GHz, 1.3 GHz is written to the antitu, by the way, it also gives 10228 points to our device

Rather, the percent simply does not stop.
As for overclocking, as SKelrom wrote, the frequencies from 300 to 1300 are sewn up at the kernel level and to change this, you have to dig in the kernel (he did not do this in his first firmware).

[Macraune]

Friends, please help customize the control buttons on RetroARCH on the firmware from the skeleton.
On the stock, everything worked by default, but as it was sewn, the buttons do not work

[Demanih]

MakhRaune @ 08/15/2013, 21:32

Friends, help, please, configure the control buttons on RetroARCH on the firmware from the skeleton. On the stock, everything worked by default, but as it was sewn, the buttons do not work

Watch the video and do as shown.

[Dvemer89]

I took care of ordering a more capacious battery, disassembled the console, took a few photos.
Acc was on 2100 mAh.

From what surprised me: there is a microphone on the board and there is no hole in the case for it.
Photos under the spoiler.

[Testonly44]

And where can I download games that are posted here in video reviews?

[Demanih]

Testonly44 @ 08.21.2013, 01:50

And where can I download games that are posted here in video reviews?

Here we must look
By emulators here to watch

[Demanih]

I will add more by firmware.
When working on the original: Kernel version: 3.0.8
Build Number: S5110b-01-V2.2.2-20130523
and from the official site: Kernel version: 3.0.8
Build Number: S5110b-01-V2.2.5-20130625

Cool reader did not work normally (did not display the text of the book).
The subtitles did not work in MX Player (they were displayed somewhere off the screen)

In the firmware from SKelrom: Kernel version: 3.0.50
Build Number: S5110b-SKelrom-v1.0-JXDs5110B-20130611

These programs worked fine.

[Dvemer89]

Guys, that while my device was not I often saw reviews that the buttons on / off and the sound + and - failed, and now the device appeared, I poyuzal and I lost the volume button "+", no one remembers where Was this a topic? And how to treat?

Post has been editedDvemer89 - 22.08.13, 07:58

[Dvemer89]

Something I can not edit the past message, so I am writing one more in a row.

I stitched the console with the firmware from the scleroma, everything is much better than I expected :) Acc during the game in the emulation ps1 does not heat like a dog (and if it heats up quite a bit), the launcher is nice, though I did not understand what the main screen is and why On the home button, he rolls out all the desktops to me, although the logic should shift to the central one.

And what else pleased, in the stock firmware, going into the battery menu showed that most of the battery was eating some kind of connection to the network, which network I was talking about I do not know. there is no GSM module in the console, but now everything correctly shows that most of the screen is eating up.

Post has been editedDvemer89 - 22.08.13, 10:09

[Laynys11]

Guys, tell me how to be!
The instructions say that:

Required points:
Wipe data - Yes;
Wipe cache - Yes;
Advanced - Wipe Dalvik cache - Yes.
Now select apply update from sdcard and specify the XSAMPLE-Skelrom.zip file, reload the console after installing the update.

And I have a little different, tell me what you need to click?

Post has been editedLaynys11 - 22.08.13, 18:33

[Dvemer89]

Laynys11,

Wipe data you have the third item below
Wipe cache follows

But anvanced item is not visible. I don't know what's the matter here.

[yanface]

I have not received it in a week