161 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Yota Many new (LTE) / Yota Ruby (Megaphone MR100-2) - Discussion | [ltemodem] [mifi] Discussion of mobile LTE routers from Yota
How much does the router hold during normal use and full charge?
The charge of the router is enough for normal use (periodic web surfing, mail, a couple of commercials, a bit of music) for:
all 16 hours or more [ 84 ] ** [9,26%]
14-16 hours [ 48 ] ** [5,29%]
12-14 hours [ 45 ] ** [4,96%]
10-12 hours [ 92 ] ** [10,14%]
8-10 hours [ 123 ] ** [13,56%]
6-8 hours [ 214 ] ** [23,59%]
less than 6 hours [ 301 ] ** [33,19%]
Total votes: 907
 
Procedureol
Message#1
04.08.13, 04:33
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 261
Check in: 14.08.09

Reputation:-  16  +

Yota Many / Yota Ruby (Megaphone MR100-2) - Discussion
Selection and comparison of wireless modems



Attached Image


Important!
Features
Additional photos
Attached Image

A characteristic feature of the router was the use of E-ink display (electronic ink technology), which always shows the battery charge (even when the router is turned off, the E-Ink technology allows this without affecting the battery), and in the on state - the number of users and the status of the function Yota Share (open network).
Attached Image

Other important features are the increased running time and the patented dual USB / micro USB connector.

Compared with the previous version of the mobile router (meaning Quanta), the Yota Many battery is one and a half times larger (2100 mAh vs. 1430 mAh).
The manufacturer assures that the battery charge is now enough for 16 hours of surfing (more precisely, synchronization with a smartphone), when downloading and downloading video - 6 hours, in standby mode - 60 hours, in sleep mode - 39 days. (http://www.ferra.ru/ru/networks/news/2013/05/24/Yota-Ruby/)
Full charge time is about two hours. You can charge the device's battery by 70% in 1 hour.
Yota Many can be charged either through a cable (included in the package), by connecting it to a standard or micro USB connector, or by connecting directly to a USB connector on a computer (simply by unfolding the USB connector). When connected to a computer, even a completely discharged router will start working as a USB modem.
Attached Image

The dual USB / micro USB connector, migrated from the old Many, is now made of nice metal. Although it seems like the old connector did not break anyone ... Thanks to this clever connector, the router can be inserted without unnecessary wires into the USB port of the computer and used as a modem. In addition, the connector can be used as a stop, so that the router does not fall when standing.

The router uses a micro-SIM, which is inserted into a barely noticeable slot on the side of the connector. Finally, Yota is already using a branded SIM card (in Quante there was just a white SIM card). The router does not work with other SIM cards (we are waiting for the unlock, including the 3G unlock, see below).

There are no external connectors for additional antennas, however, inside the router, on the board, there are 4 different connectors

Yes, there are no reception level indicators in the router! Neither on the display, nor micro-plugs with lights (as it was in the old Many), not even in the web interface. The web interface only has signal values ​​in db.

Through the web interface, you can turn off the blue light of the logo Yota!

The router has a 3-position mode switch "ON" - "OFF" - "Yota Share", and the position "OFF" is in the middle, which in my opinion is not very convenient. There is also a Reset button located in the same switch.

The Yota Share feature allows you to create an open network parallel to the closed. The ratio of the number of available connections through an open network and closed (a total of maximum 8) is configured in the web interface. When the open connection limit is reached, the emoticon on the display (which just lights up when the open network is turned on) changes to "surprised"

Specifications
Attached Image
Size and weight:
Height: 97 mm
Width: 67 mm
Thickness: 13mm
Weight: 90 g

Communication options:
WAN communication standard: 3GPP E-UTRA Rel9,
UTRAN Rel8 Cat24, EGPRS
LAN Communication Standard: IEEE 802.11 b / g / n

Compatibility
Requirements for working via USB:
USB 2.0 and up
Windows XP SP3 / Vista / 7/8
Mac OS X 10.5 and higher
Linux and other operating systems with CDC / RNDIS support

Requirements for work on Wi-Fi:
Any device that supports
Wi-Fi IEEE 802.11 b / g / n

Developed in Russia. Collected in China. Made for us))
Produced by Ampak Technology Inc. in China (http://www.yota.ru/ru/support/)

FAQ
BUT.How to make a hidden SSID?
B.In the advanced admin.

BUT.How to overcome the speed limit torrents streaming video?
B.Start traffic through TOR, I2P.

BUT.What to do if does not distribute WiFi?
B.Make a factory reset + 15 seconds, press the reset button after the return.

BUT.How to programmatically reset the router?
B.From the extended admin panel or in status.yota.ru, execute the JavaScript (Chromium, Chrome and analogues: F12, Console tab; Firefox: Shift + Ctrl + K) console commands
rebootDevice (null);


BUT.How to unlock under all sims Yota Ruby?
B.Currently, there is only one way - to get the unlock code from the operator who locked the router.

Firmware
Useful
  • Universal unlock instructions Yota Many 1 revision, Megaphone MR100-2
  • Universal unlock instructions Yota Many 2 revision
  • Feedback on use
  • Video review 4G router MegaFon MR100-2
    Increased working time to the detriment of "long range"
  • How to find out the revision of the device
  • Application forms from Yota

  • Autopsy
    It is cleverly opened, but not difficult, by analogy with the old Many - first, carefully picking up, you have to pull out the end where the display is, then the inside is pushed to the side of the connector. Well, then everything is clear.
    Attached Image
    Attached Image

    To disassemble the insides, you must first remove the battery.
    Attached Image
    Attached Image

    The following photo shows the characteristic feature of the E-Ink-display - even when disconnected from the board, it shows what it should:
    Attached Image
    Attached Image

    Attached Image

    Attached Image
    Attached Image

    Chip input amplifierTriQuint TQM7M9023- RF multi-band and multi-mode power amplifier (Multi-band, Multi-mode Power Amplifier, MMPA). According to the chip manufacturer, the product is the best in energy efficiency in its class, with the result that its use can add up to 15% to the battery life of the mobile device. The chip supports quad-band GSM / EDGE and WCDMA / LTE bands 1, 2, 5 and 8. This allows the amplifier to be used in devices designed for operation in the countries of North America, Europe and Asia. (http://www.ixbt.com/news/hard/index.shtml?16/13/83).Near (Atheros chip) -antenna connector on the boardApparently for 4G / 3G / 2G antennas.
    Well striking chipQualcomm MDM9215- platformQualcomm Gobi 4G LTEThe chip supports LTE Rel9, HSPA + Rel 8, 1x / DO TD-SCDMA, GSM / GPRS / EDGE (http://ru-4g.livejournal.com/506479.html, http://www.qualcomm.com/chipsets/gobi).
    Between these two chips there is another barely noticeable chip.WTR1605L, this is generally a Qualcomm super chip - according to the information on the network, it supports seven frequency bands: three below 1 GHz, three on the higher one and on the same 2.5+ GHz, and at the same time produced by the 28-nm process technology, which promises to achieve record power consumption, even though such a broad range of supported frequencies. (http://zona-iphone.ru/novosti/chip-qualcomm-wtr1605l-mozhet-byit-v-iphone-5.html).Curiously, this chip was already found in the LG Nexus 4 smartphone inactive due to the lack of a power amplifier (http://home-android.ru/news/739).Let's hope that Many have it all right ...
    Chip is also visibleAtheros AR6 103G-BM2D, but he seems to have to distribute Wi-Fi.
    On the board are visible3 more antenna connectors in different places.

  • Differences from Yota Ruby
    Back in the spring at CTIA 2013, Yota Devices demonstrated the same, but already LTE / UMTS / GSM, Yota Ruby router.http://www.ferra.ru/ru/networks/news/2013/05/24/Yota-Ruby/
    Let's try to figure out what they have in common. It looks like a 1 in 1 router like ours Many.
    Yota Ruby has a network color indication: the orange man lights up when the router works in 2G or 3G networks, and blue when you are in a fast LTE network. Yota Ruby router simultaneously supports 5 different LTE bands in both FDD and TDD, and also supports GSM and UMTS standards. The device is based on the MDM 9215 chipset, released by Qualcomm using the 28 nm technology. We have already found out that there is a similar chipset in our exploded Many.
    However, on the Yota website in the Support section (http://www.yota.ru/ru/support/)They write that Yota Many is made on the Ruby platform, and its only difference is the frequencies that Many can work on - Ruby has higher frequency choices. Many also operate on the LTE Band 7 frequency (2600 MHz - the Yota network operates in this band) and LTE Band 20 (800 MHz). And note: since Yota does not currently provide a 3G service, 3G is software-disabled in devices. In the event of a service, Yota can remotely enable this support. And then, as follows from what was said on the official website, Many can also light up in an orange color.
    After analyzing all of the above, as well as the insides of the Many, we can conclude that the new Many is hardware-the same Ruby, only LTE frequencies are programmed in it and 3G support is disabled, well, and besides this the router is locked under the Iota SIM card.
    So, we are waiting for the unlock from the craftsmen !!!If you manage to unlock 3G, or, for example, upload firmware from Ruby, then this will be a mega-router in general !!!

Instructions
  • Unlocking the device through the operator
    Today, a conversation with technical support Yota through a chat on their website:
    11:08

    ������ ����! download


    11:09Hello XXX.
    11:09To whom and how can I apply for unlocking my Yota Many modem, on the basis of paragraph 2 of Art. 16 SOZPP?
    11:10Now I will clarify, Dmitry, a minute, please.
    11:12Dmitry, please provide your account number or phone number, or email address specified in the Profile.
    11:12How many days have passed since the purchase of the device?
    11:13 + 79XXXXXXXXX
    11:13 In the summer I bought
    11:14We can unlock the device, but we cannot guarantee work in the networks of other operators after unlocking - this information needs to be independently verified with the manufacturer or with the telecom operator. We guarantee only networking on Yota. In addition, unlocking takes 14 days, immediately unlock will not work.
    11:14 I understand all the consequences of unlocking. I understand that the firmware should be updated by "air"?
    11:15 And if I do not use your services at the moment, how can you remove the blocking offline?
    11:16You will be sent instructions. I will send you an e-mail application form and instructions that you need to specify in it. But I need a device ID or passport holder number.
    11:16 Ready to indicate passport holder number
    11:16 XX XX XXXXXX
    11:16 Is that right?
    11:17Yes. What address to send an email to?
    11:17 [email protected]
    11:17 Contact specified in the profile.
    11:18Good. Thank you for contacting us! Goodbye.


    After that I received a letter in the mail:
    Hello!

    To resolve your issue, please send us a completed application for unlocking your Yota device:http://www.yota.ru/dow...Yota_Blank_Unlock.pdf.

    Please note that in the application, you must specify the IMEI (international identifier of mobile equipment) of your device, as well as attach a screenshot of the page with IMEI from its web interface. How to find this page you can learn from the instructions:http://www.yota.ru/dow..._Yota_Instruction.pdf.

    Within 14 days of receipt of your application, we will provide you with an answer with further instructions.

    Regards, Yota

    http://www.yota.ru
    8 800 550-00-07 - free of charge, valid for all calls within Russia.

    I answered them with a filled out statement, received an answer:
    Dear Customer!
    In response to your appeal, we inform you that in order to unlock the device you can contact the point of sale and service at the address: Moscow, ul. Decembrists, 12, TC "Golden Babylon". Opening hours: 10: 00–22: 00. You should have a passport and unlockable device.
    We remind you that all Yota devices are configured by default to work only on the network of the Yota operator. Therefore, we cannot guarantee the correct operation of the device in the networks of other operators after unlocking - this information must be independently verified with the manufacturer or with the telecom operator. We guarantee only networking on Yota.
    Thanks for contacting us.

    It is important to us that you think about supporting Yota - rate the answer here.

    Sergey Nikolaev
    Yota customer support
    [email protected]
    www.yota.ru

    Be prepared that the sales consultants mow under the "fool" and first pretend that they do not know what is at stake, etc. etc.

  • Installing custom firmware
    1. Install the firmwareAttached fileYRRR1_1.32_98.zip(26.55 MB)

    1. Move onhttp://status.yota.ru/update/;
    2. Click "Select File" and select the firmwareYRRR1_1.32_98.ipk (removing it from the archive YRRR1_1.32_98.ipk.zip ), click "Refresh".
    2. Get FTP access
    1. Move on
      http://status.yota.ru/update/;
    2. In Chome / Chromium browsers, press F12, go to the “Console” tab and enter the commands:
      deviceSimpleCommand ("iptables -X", null);
      deviceSimpleCommand ("iptables -F", null);

    3. Disable digital signature verification
    1. Go to any FTP client onftp://10.0.0.1;
    2. Copy to the root file:ipk_verify_fixer.tar.bz2(removing it from the archiveAttached fileipk_verify_fixer.tar.bz2.zip(462 bytes)
      )
    3. Go through Telnet and unpack the archive at the root:
      “Start ->Run ”-telnet 10.0.0.1
      Enter your loginroot and password oelinux123
      Enter the commandcd /
      Enter the commandtar -xvjf ./ipk_verify_fixer.tar.bz2
    After that, through the standard interface, you can install any firmware.
    ATTENTION! Installing some firmware can lead to a complete inoperability and non-maintainability of the device, you do this at your own peril and risk!

    4. Install KASTOM firmwareAttached fileYRRR1_1.34_fixed6.ipk.zip(28.06 MB)

    1. Move onhttp://status.yota.ru/update/;
    2. Click "Select File" and select the firmwareYRRR1_1.34_fixed6.ipk(removing it from the archiveYRRR1_1.34_fixed6.ipk.zip), click "Refresh".


    After switching to this APN firmware, you need to manually register -internet.yota.ru, the remaining fields are left without intervention

    As a result, you will have access via FTP, telnet and ADB, the ability to usestandard amdinka, install any firmware (for this model, EDS checking is disabled). Auto-update of the router “by air” is also disabled.

    (thank* daiverddd )

  • Extended admin panel
    Logins are stored in/mnt/jffs2/conf/user/ui.conf:
    ui_acc_user = admin
    ui_acc_operator = operator
    ui_acc_gemtek = gemtek

    Passwords in/mnt/jffs2/conf/user/httpasswd.conf:
    http_web_login_password = admin
    operator_password = operator
    gemtek_password = gemtek0978

    (thank* a_lex999 )

    I strongly advise you to change them.

  • Auto switch between 2G / 3G / 4G
    Firmware 1_1.32 unlocked code from Yota does not have an extended admin (it was simply removed from there, the old version does not fit).
    Configure the router to automatically switch between2G / 3G / 4G it is possible so (to execute in the JavaScript console):

    getMobileSettings (function (data) {
    var params = data;
    params.selectedNetworkType = "Auto (4G / 3G / 2G)";

    $ .post (
    devCtrlUrl,
    {
    "authparam": calcAuthParam (),
    "command": "setMobileSettings",
    "dataRoamingEnable": params.dataRoamingEnable,
    "wiFiAutoOffEnable": params.wiFiAutoOffEnable,
    "wiFiAutoOffMode": params.wiFiAutoOffMode,
    "netAutoSelect": params.netAutoSelect,
    "selectedOperator": params.selectedOperator,
    "selectedNetworkType": params.selectedNetworkType,
    "logoLedControl": params.logoLedControl
    },
    function (ok) {
    console.log (ok);
    }, "json"
    ) .error (devErrorHandler);
    });

    These parameters, in theory, will be saved until the device is reset.






There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPicture.


Post has been editedstp101 - 21.09.18, 18:19
Reason for editing: New header. Edited SKALDEK
Alex_Stranger
Message#42
14.08.13, 14:19
Visitor
**
[offline]

Group: Active users
Messages 26
Check in: 08.08.07

Reputation:-  0  +

The power button broke - creating a shared network, the device was being tested, the crack was on receipt. Apparently over time, this will happen on any device if you frequently pull this switch
Aktai
Message#43
15.08.13, 09:57
Out of the darkness ...
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2148
Check in: 26.11.11
Samsung Galaxy Note 3 LTE SM-N9005

Reputation:-  156  +

merly_temp
Message#44
15.08.13, 16:24
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 345
Check in: 22.02.11
Motorola defy

Reputation:-  14  +

Aktai @ 08/15/2013, 10:57*
The Ruby project is a new LTE router: what's inside it, and how we designed it, you can ask questions

I read the comments, some excerpts from there are interesting:

We created the device not only under Yota Russia, which became our first customers,but also for others, including European operators. 2G and 3G are supported on the device by hardware, and we can update the firmware at any time by unlocking these functions as soon as we receive a request from the operator.


The device can work with any operator, but now comes attached to one operator. In the Russian Federation, most likely, all operators will do the same, this is a normal practice.In Europe, the router comes unlocked.


And what is it called in Europe, where to buy? The device looks very interesting, but tied to one operator, it is only needed for a limited circle of people. I, for example, use such things mainly on vacation or business trip.
Soon will be one large operator. Details do not have the right to voice.


In general, it’s not interesting what the operator is and there are hopes for an unlock.
fostykoka
Message#45
17.08.13, 16:09
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 19.11.09
Nokia Lumia 920

Reputation:-  2    +

Hello everyone, I follow the topic carefully, I found an interesting comment about unlocking(link to the comment itself in the article on Habré from YotaDevices)
The ban on simlock in Russia is caused by article 16 of the “Law on Consumer Protection”, specifically clause 2.

2. It is forbidden to condition the purchase of certain goods (work, services) by the obligatory purchase of other goods (work, services). Losses caused to the consumer due to violation of his right to free choice of goods (works, services) are reimbursed by the seller (executor) in full.


--------------------
Ololo Pysch Pysch
dkuzevanov
Message#46
17.08.13, 17:17
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

Good afternoon, ladies and gentlemen!

There is a suggestion on how to unblock a router to other operators.
So, we go onhttp://status.yota.ru/, press F12 and go to the "Console" tab.
This is a JavaScript console, it is in Chome (I don’t know in other browsers).

Execute the command:
getMobileSettings (function (data) {
console.log (data);
});

We get ruzlutat:
{
"dataRoamingEnable": true
"wiFiAutoOffEnable": false,
"logoLedControl": 1,
"netAutoSelect": true
"selected Operator": "YOTA",
"availableOperators":],
"selectedNetworkType": "4G only",
"networkTypes": ["Auto (4G / 3G / 2G)", "4G only", "3G only", "4G / 3G only", "3G / 2G only", "2G only"]
}


Funny values, is not it?
Well, I'll tell you, you can override them for the ones we need!

We are only interested in these three values ​​-selectedNetworkType, netAutoSelectandselectedOperator.
You must set selectedNetworkType = "Auto (4G / 3G / 2G)" or "3G / 2G only", and still play with netAutoSelect = true / false and selectedOperator = "BEELINE" / "MTS" / "MEGAFON" / "YOTA"
As a result, you should get this:
var params = new Object;
params.selectedNetworkType = "Auto (4G / 3G / 2G)";
params.selectedOperator = "";
params.netAutoSelect = true;
setMobileSettings (params, function (ok) {
if (! ok) {
console.log ('FAIL');
return;
}
console.log ('OK');
});

ATTENTION! After making changes to these parameters, you must restart the router:
rebootDevice (null);


I do not have the opportunity to replace the SIM card and check the work, BUT, on the Yota SIM card, the router selected the Beeline network and wrote “Connection error”.
Therefore, I ask you to do this and unsubscribe here about the results.
Who will help?


Also, the router has the ability to make USSD-requests and send SMS.
Again you need another SIM card to check.

All interesting features are here.http://status.yota.ru/js/devControl.jsand herehttp://status.yota.ru/js/indication.js
It will be useful to those who know JS.

There is also an interesting feature:
function cmsSystem (s, callback) {
if (simulator) {
setTimeout (function () {callback (0);}, 100);
return;
}

var r = {};
r.authparam = calcAuthParam ();
r.system = s;
r.command = "system";
$ .post (
devCtrlUrl, r, callback, "json"
) .error (devErrorHandler);
}

Runs commands on the router command line.
But the output of the result back - it does not have. Returns status 0 - on success.
Use this (where instead of "cat" your team):
cmsSystem (
"cat",
function (data) {console.log (data); }
);


List of functions to receive information:
getGeneralInfo (function (data) {
console.log (data);
});

getStatus (function (data) {
console.log (data);
});

getWebSettings (function (data) {
console.log (data);
});

getWifiSettings (function (data) {
console.log (data);
});

getMobileSettings (function (data) {
console.log (data);
});

getWelcomePageContent (function (data) {
console.log (data);
});

getPortForwardingRules (function (data) {
console.log (data);
});

getDhcpRange (function (data) {
console.log (data);
});

The list of functions that set values ​​(use the same way as we set the parameters above):
setWebSettings (params, callback);
setWifiSettings (params, callback);
setMobileSettings (params, callback);
setWelcomePageContent (params, callback);
setPortForwardingRules (params, callback);
setDhcpRange (params, callback);

ATTENTION! After using these functions (setting values), it is necessary to reboot the router:
rebootDevice (null);


Functions of sending USSD-request and SMS:
sendUssdRequest (ussd, callback);
sendSms (phoneNumber, text, callback);


Post has been editeddkuzevanov - 17.08.13, 17:35
dkuzevanov
Message#47
17.08.13, 18:34
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

Alex_Stranger @ 08/09/2013, 11:11*
Inserted a Beeline SIM card, no reaction, just writing a network search - the network was not found.
I thought I would see a request to enter a code or some additional interfaces appear on the computer - no, I just cannot find the network.

Try to use what I wrote above.
Works?
Alex_Stranger
Message#48
17.08.13, 18:48
Visitor
**
[offline]

Group: Active users
Messages 26
Check in: 08.08.07

Reputation:-  0  +

the device was in testing, already given unfortunately
ev3000
Message#49
18.08.13, 00:45
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 278
Check in: 11.09.07

Reputation:-  28  +

dkuzevanovIf after your advice, many earn with other operators, this is simply super !!! But the question is how to set up settings, for example, under a megaphone (after all, you need to set apn and log and pass) and you need to disable the firmware updates. Otherwise, they will release a new firmware, closing the console and update the router with the loss of all open functions ..
I honestly thought tomorrow to call in and buy many ..
dkuzevanov
Message#50
18.08.13, 07:48
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

ev3000 @ 08/18/2013, 01:45*
If after your advice, many earn with other operators, this is simply super !!! But the question is how to set up settings, for example, under a megaphone (after all, you need to set apn and log and pass) and you need to disable the firmware updates. Otherwise, they will release a new firmware, closing the console and update the router with the loss of all open functions ..
I honestly thought tomorrow to call in and buy many ..


Here are a couple of things:
getVpnParams (function (data) {
console.log (data);
});

{
op_l2tp_ip: ""
op_l2tp_mode: "0"
op_l2tp_pwd: ""
op_l2tp_sharedkey: ""
op_l2tp_tunnel: "1"
op_l2tp_user: ""
op_pptp_ip: ""
op_pptp_mode: "0"
op_pptp_pwd: ""
op_pptp_sharedkey: ""
op_pptp_tunnel: "0"
op_pptp_user: ""
op_vpn_mode: "0"
op_vpn_mtu: "1400"
sys_pass_ipsec: "enable"
sys_pass_l2tp: "enable"
sys_pass_pptp: "enable"
vpn_ipsec_auth_mode: "pre_shared_key"
vpn_ipsec_dh_group: "modp1024"
vpn_ipsec_main_auth: "sha1"
vpn_ipsec_main_ciph: "3des"
vpn_ipsec_quick_auth: "hmac_sha1, hmac_md5"
vpn_ipsec_quick_ciph: "3des"
}

setVpnParams (p, callback);


And this:
getApnParams (function (data) {
console.log (data);
});

{
modem_apn_auth_type: "",
modem_apn_password: "",
modem_apn_user: "",
modem_attach_apn_name: "",
modem_attach_apn_mode: "0"
}

setApnParams (p, callback);


Are these the parameters?

Posted on 08/18/2013 07:48:

ev3000 @ 08/18/2013, 01:45*
set apn

And now APN is standard -intrenet
fixafixa
Message#51
18.08.13, 09:20
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1842
Check in: 01.02.09
Samsung Galaxy A7 (2018) SM-A750FZ

Reputation:-  32  +

Damn you can buy such a thing! But rebja 20 mb / s limitation as with all operators is nonsense, even on Anlim. When downloading a movie from Vk to iPad, it was 550 kb / s. On the fig, then write on each fence 4g and so on when they chop off speed to the subscriber? So DC-HSPA + gives the same 20mb / s. Measurements were made on the iPad mini through speedtest, yandex, .2ip, and so on. See photo. This is all for 3G and the battery eats less!

Attached images
Attached Image
Attached Image


Post has been editedfixafixa - 18.08.13, 09:23
Reason for editing: Added picture


--------------------
Yota, iPad 9.7 2018, iPhone 7
HACKINTOSH New 10.14.4i5 8500. ASUS Z370 M PRIME II INTEL UHD 630 DDR4 16GB NVMe M.2 SSD500GB SAMSUNG 970 EVO
Win10 SSD500 SAMSUNG 860EVO
dkuzevanov
Message#52
18.08.13, 09:49
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

Damn you can buy such a thing! But rebja 20 mb / s limitation as with all operators is nonsense, even on Anlim. When downloading a movie from Vk to iPad, it was 550 kb / s. On the fig, then write on each fence 4g and so on when they chop off speed to the subscriber? So DC-HSPA + gives the same 20mb / s. Measurements were made on the iPad mini through speedtest, yandex, .2ip, and so on. See photo. This is all for 3G and the battery eats less!


There is no voice channel in LTE. 100 percent of their bandwidth is used for data services.
In theory, with a well-developed coverage - LTE will be significantly more stable in speed than 3G.
Alex_Stranger
Message#53
18.08.13, 10:01
Visitor
**
[offline]

Group: Active users
Messages 26
Check in: 08.08.07

Reputation:-  0  +

And not only in theory. Eta gave herself 2 megabytes of torrent jumps and megabytes back in Kazan.
Plus a good ping.
dkuzevanov
Message#54
18.08.13, 17:06
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

All ashes.
When installing a SIM-card of another operator issues
getSimStatus (function (data) {
console.log (data);
});

{
modem_info_pin2_retries: "3"
modem_info_pin_retries: "3"
modem_info_puk2_retries: "10"
modem_info_puk_retries: "10"
modem_info_sim_lock_enable: "0"
modem_info_sim_operation_progress: "0"
modem_info_sim_operation_result: "0"
modem_info_sim_operation_result_v: "CME_SUCCESS"
modem_info_sim_status: "7"
modem_info_sim_status_v: "PH-NET PIN"
}


PH NET PIN- Lock on the operator in the firmware.
Need to think aside
cmsSystem (
"ls -la",
function () {callback (true); }
);


Post has been editeddkuzevanov - 18.08.13, 17:08
dkuzevanov
Message#55
18.08.13, 19:34
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

So, got root on the router! We work!
Linux version 3.0.21+ (kevin @ kevin-android-build-system) (gcc version 4.6.3 20111117 (prerelease) (GCC)) # 1 PREEMPT Tue Apr 30 18:09:49 CST 2013
ev3000
Message#56
18.08.13, 19:53
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 278
Check in: 11.09.07

Reputation:-  28  +

dkuzevanov,
I bought many, if I need to potest, then I'm ready!
dkuzevanov
Message#57
18.08.13, 20:02
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

ev3000 @ 08/18/2013, 20:53*
I bought many, if I need to potest, then I'm ready!

I have already tested everything with another sim card. Now I have a ROOT on the router, I study.
ev3000
Message#58
18.08.13, 20:06
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 278
Check in: 11.09.07

Reputation:-  28  +

dkuzevanov,Then we are looking forward to the results!
dkuzevanov
Message#59
20.08.13, 11:04
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

ev3000 @ 08/18/2013, 01:45*
If after your advice, many earn with other operators, this is simply super !!! But the question is how to set up settings, for example, under a megaphone (after all, you need to set apn and log and pass) and you need to disable the firmware updates. Otherwise, they will release a new firmware, closing the console and update the router with the loss of all open functions ..

So, there is news:
The router has memory of all APs for all networks. The rest of the user, pass parameters are corrected freely.
Firmware update can be disabled, but the request forThe update can be initiated both from the router and from the operator.
On the default router, there is an FTP server, I’ve downloaded all the files that are responsible for the WEB face - in the evening I’ll upload it. But they are compiled into executable files (cgi-bin), it will take time to disassemble them.

Post has been editeddkuzevanov - 20.08.13, 11:08
ev3000
Message#60
20.08.13, 11:08
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 278
Check in: 11.09.07

Reputation:-  28  +

So, there is news:
The router has memory of all APs for all networks. The rest of the user, pass parameters are corrected freely.


Now to understand how to make it work with 3g networks? for example a megaphone ..
p.s. for many they are preparing a new firmware that will solve the problem of discharging the device
dkuzevanov
Message#61
20.08.13, 11:11
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 450
Check in: 17.08.13
Apple iPhone 5s

Reputation:-  14  +

ev3000 @ 08.08.2013, 12:08*
Now to understand how to make it work with 3g networks? for example a megaphone ..
p.s. for many they are preparing a new firmware that will solve the problem of discharging the device

As if with this firmware, they did not close root access to the router.
Therefore, I will not be updated, and when the update comes out, I’ll ask someone to check if the access works.

I now understand the software and firmware, we will soon be able to unlock :)
It takes time, besides this there is work and family, so already I sleep for 4 hours because of this matter.

Are there any advanced Linux users here?
How to solve the problem "segmentation failed" with ipkg install? There are 46 meters of operatives, very little free, SWAP is off. Because of the same?

Post has been editeddkuzevanov - 20.08.13, 11:37
Yota
 

161 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 15:14