[X]Assistant

[deepcrew]

DiscussionCube U39GT
U39GT, IconBit Nettab Thor ZX
Description |Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

FAQ

Features and photos:

The new tablet called Cube U39GT surprises first of all with its display, which is made according to the PLS technology and with a diagonal of 9 inches has the highest resolution - 1920x1280 inches. The density of pixels is 252 ppi. The processor is used quite well - the four-core RockChip RK3188, which uses the core Cortex-A9, their frequency reaches 1.6 gigahertz. And the graphics are acceptable - Mali-400MP4. All this, coupled with 2 gigabytes of RAM standard LPDDR-3 allows Cube U39GT to score 18,000 points in AnTuTu (according to the manufacturer). Also in the characteristics of new items appear 16 gigabytes of permanent memory, two cameras with a resolution of 5 and 2 megapixels, and support for Wi-Fi networks and Bluetooth. GPS, unfortunately, is missing. The operating system is unallocated Android 4.2.2. Battery capacity - 5200 mAh. Overall dimensions are usual - 233 x 153 x 8.9 mm, and the weight too - 480 grams.

Differences CUBE U39GT 3G (TALK9)

Quad-core MediaTek MT8389T with a frequency of 1.5 GHz. Video accelerator PowerVR SGX544. 1GB DDR3. The presence of 3G and GPS are otherwise the same ...

Instructions:

Getting Root

VRoot
Kingo Android Root
Via ADB

Firmware via RKBatchTool

Firmware via PC, laptop or netbook.

Make sure the drivers are installed correctly. If the drivers are not installed, or the green box does not light up, change the usb port or usb cable, for firmware it is advisable to use the USB port v2.0.

it is necessary:
* the first time you use your PC in conjunction with an android device, install the necessary USB driver.
* Before flashing the tablet, charge the tablet preferably up to 80%, make sure that the driver is installed correctly.
on pc:
* download archive with firmware
* extract the firmware file from the archive (the firmware file extension should be IMG)
* Download the program BatchTool V1.5 for firmware device
* unpack to any convenient folder for you
* run the file RKBatchTool.exe
* click on the "..." button and specify the location of the firmware file
For tablet:
* Turn off the tablet and hold down the "+" button and the "on" button (within 3-5 seconds) and connect the USB cable.
* Wait for the port with number 1 on the PC screen in the BatchTool V1.5 program window to be highlighted in green and release the buttons on the tablet. (only a green square is required)
* After the green square appears, click on the "upgrade" button and wait for the process to finish
In no case do not pull out the usb cable from the tablet / USB ports !!!
* wait until the end of the process
If the firmware is successfully completed, the tablet will turn on and load automatically.
You can then disconnect the USB cable.

Recovery through firmware

1. turn off the tablet.
2. Write a new image to a blank SD card.
3. Insert the SD card into the tablet.
4. Hold down the two buttons "VOLUME +" and "Power" and hold for 3-5 seconds, then release "Power"
5. Agree to install the image and observe the installation process.

Installing ClockworkMod Recovery (CWM)

Drivers and Utilities

В® ArcTools-For CWM
RKBatchTool 1.7 RuDrivers Flasher
Adb driver

Firmware

firmware with iconbit netthab thor zx
Build firmware
Firmware 1.04
Firmware 1.05
Firmware 1.06
Build 1.06 without trash + Root
Firmware 4.2.2 from 02/15/14 (U39Gt-W)
4.4.2 build
New build 4.2.2
Build 4.4.4

Topics CuratorKeks.84725
Any suggestions for improving the caps or themes to write here

Post has been editedRuff - 02.01.15, 12:05

Reason for editing: corrected links

[XFactor]

alitravin

And what is the whole in the corpse ??

[alitravin]

The display, cables, the motherboard is faulty, there are no cameras, the battery has been installed new, now it must have gone into protection from frostbite

[german31]

Fakeoke @ 04.24.17, 19:41

stitchedhttp://freaktab.com/fo..rom-for-the-cube-u39gtwith all the recommendations. While satisfied.

I also just flashed it ... is this the last possible on this tablet?

And something in the recovery does not come with this firmware)

Friends, tell me, is the firmware from the 4.4.4 header and the same link? Download from cfreaktab.com did not work, if it is different, put in a cap who has

[ildar161]

german31 @ 04/23/18 19:33

Friends, tell me, is the firmware from the 4.4.4 header and the same link? Download from cfreaktab.com did not work, if it is different, put in a cap who has

I don’t know whether they are different or not, but after an hour of searching I still found the firmware they are talking about. By the way, absolutely everyone is praised, they write that the tablet finally works fine without lags. I will now put myself.https: //debian-admin.e...droid/custom-roms.html

[s_dead]

[email protected], 20:28

They write that the tablet finally works fine

Breshut)))) this tablet didn’t work properly on any other firmware, it was tupit everywhere, if not immediately then after a while, and there was no desire to work with it — it took the child to school instead of an e-book for textbooks, just for that enough ...... shame and not a tablet

Post has been editeds_dead - 23.11.18, 09:45

[DeniskaOdessa]

who will help Please skip the ready image for the firmware through the recovery ... a normal stable version of the firmware.

[ildar161]

s_dead @ 11/23/18, 12:43

breshut)))) this tablet didn’t work normally on any other firmware, it was tupit everywhere, if not immediately then in time, and it was so tupit that there was no desire to work with it

You were right ... he pisses me off. Miracle of Chinese thought
Friends nobody needs a tablet + charger + box? Everything works, perfect condition. for 1500

[gas67]

Gentlemen who know!

Who can tell me how to get a signal from a Cube U39GT unit on a monitor like LG M2080 DF in such a way that it would be possible to broadcast video from an Internet to a monitor?

And is it possible at all?

Thanks in advance! : thank_you:

[skullskull]

Guys, is there a firmware that could be installed via Recovery? Since the computer does not want to recognize the tablet.