Tronsmart T428 Quad Core - Discussion | TV Box on a chip Rockchip RK3188
T428_new_driver.rar
denmax @ 08.07.2013, 11:49
And you have problems with the fi-FEMA not? I lose network in increments of 1-2 minutes is simply losing and immediately finds ...
There is no problem with that, but at a rate so :( Do not want to see broad channel 11-7, only 11 well :( speed accordingly with the new kernel is not checked, the evening will try ...
NuN70 @ 08.07.2013, 13:25
No this is no problem, but with the speed but does not want to see broad channel 11-7, only 11 well and the speed, respectively, with the new kernel is not checked, the evening will try ...
And I did not lay out a draw here? sew Pribluda from finlessa? to be honest to the end it did not understand
denmax @ 08.07.2013, 12:32
And I did not lay out a draw here?
Post on the previous page with a link to the new kernel.
denmax @ 08.07.2013, 12:32
sew Pribluda from finlessa
Yes, and I understand just enough to flash the kernel itself (kernel). Those. daw put on the core, the rest Uberall well path points to the core.
NuN70 @ 08.07.2013, 13:37
Post on the previous page with a link to the new kernel.
ok thanks ... downloaded ... I will try to fill the way now launched ful ashdi film on the grid did not seem to have never stopped ... lag -podlagivaet course video .. firmware 1.5 finlessa 4,2,2 ...
Here's a chart to use wafers 5G actual maximum speed of playback of the video at the peak of 2Mb / s
http://pic2net.ru/0006723731
still want to understand how fast the whistle is connected to the router on the 5D ... I do 65MB / s .... something like that weird for 5G network .... never seen a screenshot of your connection ... exactly marketing
Post has been editeddenmax - 08.07.13, 12:46
denmax @ 08.07.2013, 12:44
way now launched ful ashdi film on the grid did not seem to have not stopped once
Try video with the new kernel and unsubscribe ... Lagov money had to be with the new kernel
NuN70 @ 08.07.2013, 13:54
Try video with the new kernel and unsubscribe ... Lagov money had to be with the new kernel
put the new kernel ... well obvious lag in the video is not much better ... this core for video playback
denmax @ 08.07.2013, 13:41
much better is the core for video playback
This is good news! The man promised to build a new kernel on SDK 2.0, should be even more productive. And what with WiFi BT and Ethernet, everything works, and how?
NuN70 @ 08.07.2013, 14:44
This is good news! The man promised to build a new kernel on SDK 2.0, should be even more productive. And what with WiFi BT and Ethernet, everything works, and how?
blyutut Ethernet and did not check .. checked only Wi fi ... everything is stable ... failures and loss of signal was not ... now I can not check out the rest of the child's bed was put
NuN70 @ 08.07.2013, 06:22
PS: Antutu except in 1.4a yet no where did not work ie when you run the test body occurs overload and everything.
Try another power source.
frth,
By charging the Samsung Galaxy Nexus is suitable?
By the way who have problems with WiFi advise:
A general write that Most lags and brakes because of the curve of the Chinese code and curve of their software ...
PS: For the MK908 also did the Management Board of the nucleus and seem to now no problems with video and WiFi.
Post has been editedNun70 - 08.07.13, 16:59
By charging the Samsung Galaxy Nexus is suitable?
By the way who have problems with WiFi advise:
when you have wifi problems, the first thing that i suggest is to delete ehomemediacenter.apk restart your router and your device and test again how all work.
this not are the solution to all network problems but of many.
this not are the solution to all network problems but of many.
A general write that Most lags and brakes because of the curve of the Chinese code and curve of their software ...
PS: For the MK908 also did the Management Board of the nucleus and seem to now no problems with video and WiFi.
Post has been editedNun70 - 08.07.13, 16:59
frth @ 08.07.2013, 17:21
PS: Antutu except in 1.4a yet no where did not work ie when you run the test body occurs overload and everything.
Oh by the way does not agree that's just antutu I worked without a glitch on all firmware versions and is now working with the new kernel ... there were problems with the Wi fi ... dare to buy a normal router dlink ... previous increments of 2 minutes sent whistle a knockdown))) way to test the new kernel, fell as much as 14,700 to 16,000 parrots ... ndya
Your problems with antutu associated with poor BP ... probably not enough amperage , it is also checked up ... try to find a normal power supply unit 2A or more will have no problems with front-loaded
about ehomemediacenter.apk is just stupid .. with Wi fi is not connected personally checked and removing it and remove the same work if the router is not for 1 ruble ....
Post has been editeddenmax - 08.07.13, 17:23
Stock firmware for the MK908 and T428 is Ruth. Do I understand correctly that we must also set SuperSU type of utility that you can use as root? The firmware of Finless SuperSU there in the most piercing, and I sink a tool not found.
alekz @ 08.07.2013, 22:02
Stock firmware for the MK908 and T428 is Ruth. Do I understand correctly that we must also set SuperSU type of utility that you can use as root? The firmware of Finless SuperSU there in the most piercing, and I sink a tool not found.
in my sink Ruta was not ... respectively and super su was not))), the device launches with R-BOX inscription green ... hell knows what a drain ... was carried directly on finlesa
set super su from Market if it will work, Ruth's ... everything is just ... if there is no means without root
Post has been editeddenmax - 08.07.13, 22:10
People began after the victory over fight video speed WiFi .... How strangely he behaves ... I have the same (in the same place) WiFi Samsung whistle on TV connects to a router at 250-260 Mbps, and this beautiful. .. :(
PS: It looks like a piece of iron or a driver or do not support or IEEE 802.11n or broadband connection - up to 40 MHz. The test with the inSSIDer, I show only the channel 11, while the router operates at 40 MHz. But even if the WiFi at 20 MHz must be a speed up to 150 Mbit / s. But obviously it at the moment the device does not issue :(
Post has been editedNun70 - 09.07.13, 10:34
PS: It looks like a piece of iron or a driver or do not support or IEEE 802.11n or broadband connection - up to 40 MHz. The test with the inSSIDer, I show only the channel 11, while the router operates at 40 MHz. But even if the WiFi at 20 MHz must be a speed up to 150 Mbit / s. But obviously it at the moment the device does not issue :(
Post has been editedNun70 - 09.07.13, 10:34
NuN70 @ 09.07.2013, 10:23
PS: It looks like a piece of iron or a driver or do not support or IEEE 802.11n or broadband connection - up to 40 MHz. The test with the inSSIDer, I show only the channel 11, while the router operates at 40 MHz. But even if the WiFi at 20 MHz must be a speed up to 150 Mbit / s. But obviously it at the moment the device does not issue
Here I am about the same I have all exactly the same connection at both frequencies 65mB / s ... it's not even the H ... and hell knows what))) ... it seems to me that the wood in all firmware curves .. although I can be wrong
the most fun and unexpected for me it is all of 11 wifi devices in the home network ... 5G see this whistle and my smartphone Samsung Galaxy R ... what's not expected ... but it did not seem declared support networks 5G) )))) By the way, too, is connected in all cases 65mB / s ... all this weird)))
Post has been editeddenmax - 09.07.13, 11:03
denmax @ 09.07.2013, 10:57
My smartphone Samsung Galaxy
PS: Smart, too, does not see a 40MHz channel, and accordingly also only works on the 11th channel. A whistle from the TV konekt on a wide channel to 250-260 Mbps.
PPS: While 40k and should not see. Because built-in mobile device Wi-Fi-adapter typically supports SISO mode (unicast) - 150Mbps. But TV boxing vseravno transfer rate small :(
Post has been editedNun70 - 09.07.13, 12:11
And in USB HUB with external power supply plug correctly powered TV box and the whistle for air mouse? What I do I can not think that there :( This lace from USB HUB to the TV box and power from the TV box in USB HUB? Cheto circle full of turns :(
Post has been editedNun70 - 09.07.13, 16:56
Post has been editedNun70 - 09.07.13, 16:56
NuN70 @ 09.07.2013, 17:51
And in USB HUB with external power supply plug correctly powered TV box and the whistle for air mouse? What I do I can not think that It Is lace from USB HUB to the TV box and power from the TV box in USB HUB? Cheto circle full of turns
)))) You have 2 PSU independently connected to the outlet ... in hub powered usb there but unlike bezblochnyh he bluntly data cable for connection with a whistle ... inserted into the usb whistle ... and then all mice and cameras are connected to a hub
I saw 2 kinds of hubs with PD ... they have dlinka with a conventional socket
http://samara.dns-shop.ru/catalog/i8200/vn...m-pitaniya.html
and there is a bifurcated connector usb one date, other food (actually to the PSU connector usb cable for this)
http://samara.dns-shop.ru/catalog/i135866/...m-pitaniya.html
I found all the same screenshot with speed connectivity whistle on aliekspress
http://pic2net.ru/9655833731
means 65mB / s is the maximum speed you can smoke ...)))
and indeed all was initially doubtful about wai faille chip from Broadcom AR6330 I think they even do not yet know that they let him go)))
Post has been editeddenmax - 09.07.13, 19:09
I was the author of the branches ...
And only today received the device ..
Inserted into the HDMI port on the TV, switch to it from the control panel - nothing .. Power is connected to the remote adapter is also stuck in the USB (even bought the console) .. In what an ambush, or the device turns DOA? :(
.. and all .. zafurychilo had a different port plug is why ...
Antutu 3.1.3 - 15740 displays .. 4.2.2 Firmware until changed, yet vozhus
Post has been editedPalmer - 09.07.13, 23:25
And only today received the device ..
Inserted into the HDMI port on the TV, switch to it from the control panel - nothing .. Power is connected to the remote adapter is also stuck in the USB (even bought the console) .. In what an ambush, or the device turns DOA? :(
.. and all .. zafurychilo had a different port plug is why ...
Antutu 3.1.3 - 15740 displays .. 4.2.2 Firmware until changed, yet vozhus
Post has been editedPalmer - 09.07.13, 23:25
Palmer @ 07/09/2013, 23:13
I was the author of the branches ...
krasava ... and where the branch is gone? .... now all over again on friktabu gikbayunu and collect ... let's change the name of the branch ... and will cast ... although nothing special magic is nothing fake ...
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement