[attachment = "4174454: tochka.png"]
Frequent problems: The firmware is not loaded (including hangs on the HTC logo)
Boot loop (cyclic reboot)
Relocking the bootloader on non-working firmware
The inability to flash the firmware, because the charge is less than 30% - Important!
How to get to the command line (console)? [attachment = "4175197: green.png"] Go to the Windows command prompt - Click the Start button>Run>enter
CMD in the field and click
Enter [Attachment = "4175197: green.png"] Not to constantly drive a path to
adb "CD C: \ Android" being in the android folder hold
Shift and click on the empty space of the window of the right mouse button, a window will appear and the item will be at the bottom
Open command window - thanks for the tip
N-e61 [attachment = "4174454: tochka.png"]
First you need to download and install HTCDriver_4.10.0.001.rar from the cap of this topic
spoiler \
Useful programs [attachment = "4174454: tochka.png"]
Download: Android.rar (470.7 KB)
and unpack to disk
C: folder
Android , in it, extract the files from the attached attachment from the header
recovery.img, hboot.img, boot.img, Depending on what you will sew!
(in the Android folder there should be only files, without subfolders!) [attachment = "4174454: tochka.png"]
Phone preparation: Charge, uncheck fast boot, tick USB debugging. [attachment = "4174454: tochka.png"]
The most common problem is the hang on the HTC logo after the firmware, to solve it, try clearing the fastboot cache: 1. Turn off the phone and hold the power button + volume down button
2. Select the fastboot mode from the bootloader
3. Connect the phone to your computer, the driver installation will appear on the PC (in case you do it for the first time!)
4. At the command prompt, run:
Further
Enter Enter 5. Select
Reboot at
fastboot menu.
[attachment = "4174454: tochka.png"]
If you have a stock recovery and you want to install custom: 1. Download custom recovery from the topic header
2. Copy it
(rename it if it does not have a recovery name)to folder
Android to the other files from the archive
fastboot and
Adb 3. Then sew it:
Enter fastboot flash recovery recovery.img
Enter then,
reboot [attachment = "4174454: tochka.png"]
If you have a backup, then: 1. Reboot to Recover (if you are in the bootloader, click "Reboot Bootloader" and then go to the recovery menu)
2. Restore Nandroid Backup or flash custom firmware
3. Reboot and reboot fastboot mode.
4. Execute the command:
Enter [attachment = "4174454: tochka.png"]
If you do not have custom firmware on the memory card, then: 1. Download custom recovery ClockWorkMod
2. Sew it
3. Connect the phone to the computer
4. Hitch the firmware on the phone
5. Install it by pre-flashing the kernel.
boot.img which is inside the zip archive.
fastboot flash boot boot.img
Collection of ADB codes [attachment = "4174454: tochka.png"]
adb connection check: [attachment = "4174454: tochka.png"]
reboot recovery: [attachment = "4174454: tochka.png"]
reboot bootloader: [attachment = "4174454: tochka.png"]
go to the android folder: [attachment = "4174454: tochka.png"]
We are fixing stock recovery (recovery): fastboot flash recovery stock_recovery.img
[attachment = "4174454: tochka.png"]
We sew a custom recovery (recovery): fastboot flash recovery recovery.img
[attachment = "4174454: tochka.png"]
loader loader: [attachment = "4174454: tochka.png"]
we open the loader: fastboot flash unlocktoken unlock_code.bin
[attachment = "4174454: tochka.png"]
sew kernel (kernel): fastboot flash boot boot.img
[attachment = "4174454: tochka.png"]
clean the cache (cache): [attachment = "4174454: tochka.png"]
flash firmware: fastboot flash zip firmware.zip