> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo K900 - Firmware



Rep: (84)
Lenovo K900 - Firmware
PictureLenovo K900
Description | Discussion пїЅ | Purchase пїЅ | Accesories пїЅ | Marriage пїЅ | Modifications of software and decorations пїЅ | Firmware пїЅ

Important information
Firmware, modems, core programs and everything you need to find the Lenovo K900 here
If during the firmware using a PC in the log you havesimilar to(Windriver Error: 0x20000015) error, then died devaysa flash memory and need to be replaced. Detailed description of the flash memory replace describedhere
In all, without exception, and firmware version of the modem device loses network when you turn on the mobile Internet. Someone often, someone less, but the problem is present. There is no solution. As a "crutch" try to flash a different version of the modem and choose the right with the best communication
In order to avoid all kinds of errors, mashing IMEI, okirpichivaniya and others, it is strongly recommended not to flash the device with a PC (MFT, xFSTK, PFT) without a special need
Flash the device with the help of INB (SDFUSE method), or CWM / TWRP rekaveri and no errors you provided. Flash the device with a PC only to restore "bricks"
Drivers and Utilities
Drivers:
HereandhereAll versions of drivers and utilities for firmware using a PC

Utilities:
Lenovo K900 unlocker- utility to disable verification of signature / unlock bootloader Lenovo K900
Lenovo K900 partition calculator- resizing device sections
Lenovo K900 kitchen 1.24- Utility for making changes to the firmware image for Lenovo K900
Atom flasher- Recovery / boot / droidboot firmware utility directly from Android phone

Firmware
>>>Newbies first read FAQ by firmware<<<
>>>Firmware and all the rest are the same again here <<<
Official firmware
Firmware based on official
Unofficial firmware

Instructions
Instructions for the firmware CM 12.1
recovery methods IMEI:
Known methods of installing firmware:
1) OTA (firmware upgrade for no PC required) - used update.zip firmware file. the firmware file you want to place in the folder / storage / sdcard0 / googleota / or / storage / sdcard0 /. if it is a complete firmware update (typically more than 500 MB of file size), then the flashing is complete reset. if it is a partial firmware updates (usually less than 500 MB of file size), then the flashing saves all user settings and programs.
2) SDFUSE (for flashing no PC required):
- a set of firmware files boot.bin / droidboot.img / system.img.gz / ... is used - usually the firmware is merged in this format. All firmware files must be placed in the / storage / sdcard0 / sdfuse / folder. When flashing, a full reset is done.
-used firmware file with a resolution of * .inb - firmware in this format are rare. the firmware file you want to place in the folder / storage / sdcard0 / sdfuse /. when flashing is complete reset.
3) MFT (for firmware requires a PC) - Firmware is usually merge in this format. all the firmware files are placed on your PC, with the PC is flashing. when flashing is complete reset the default settings.
4) xFSTK - "manual" method of installing firmware, analogue MFT:to read
5) Update section / system / - used system.img.gz current BIOS file. the firmware file you want to place in the folder / storage / sdcard0 / sdfuse /. when flashing saves all user settings and programs.
SDFUSE firmware update
- Download the appropriate firmware.
- In the root of the phone's built-in memory to create a folder sdfuse (/ storage / sdcard0 / sdfuse /).
- It put the firmware files (or in a format * .inb).
- Turn off the phone.
- Turn on the phone while holding down the "Volume +" and "Power" (enter into Fastboot mode).
- In the pop-up menu, select "SDUPDATE" (navigation menu, press "Volume +" and "Volume -" entry in the menu - button "Power").
- Wait until the installation is complete.
- It is recommended to do a wipe (reset default settings).
IMPORTANT: Please note that before upgrading your phone, the battery may have sufficient battery power (no less than 20%).

Instructions on firmware using Manufacturing Flash Tool (MFT)
- Download all the necessary drivers and utilities (see the spoiler "Drivers and Utilities")
- Install IntelAndroidDrv1.2.0. If swears on incompatibility (on Win8 64) - run in compatibility mode with Windows7
- Install iSocUSB-Driver-1.0.2
- Install ManufacturingFlashTool
- Run ManufacturingFlashTool.
- File-Settings. Check the box next to "Save statistics" and select the storage location for the log file.
- The line of SOC devices must specify the ID of your device. To do this, you need to connect the unit to shut down the PC. After you install the Windows Task Manager device driver will CloverviewPlus Device, in IntelSoc category. You will have a few seconds to the right-click on the device to cause its properties (if you do not have time - the device will disappear from the list and have to repeat step 7) (if not caught CloverviewPlus Device:watch). Going to the properties of the CloverviewPlus Device device, go to the Details tab. In the "Property" drop-down list, select "Equipment ID". Values ​​after "VID_" and "PID_" must be entered in the appropriate fields. Click OK.
ATTENTION! You only need to change the top line "SOC devices". The string of Android devices does not change!
Attached Image

As practice has shown, the VID and PID indicated in the screenshot above are similar for all K900 devices. Feel free to put them and do not invent others. If you do not trust us (we are LF), then look at the ID of the non-ADB driver, namely the ClowerviewPlus driver!
- Disconnect the device from the PC.
- Through the menu File - Open and select the data file, which is located in the folder with the firmware (XML format).
- Connect the switched off device to the PC. The firmware will start automatically. It should also be noted that not always the first time the firmware is completed successfully.
Important: If you have trouble with installing the driver and you do not want to suffer, put in a virtual machine or on a second Windows 7 x86 section.

More detailed instructions with all screenshots can be found.here


Instructions on firmware using Phone Flash Tool (PFT)
We readhere

OTA firmware update
!Attention!
This way of updating the firmware is possible ONLY if you have installed a stock (factory) recovery. If you have installed CWM / TWRP, then first flash the stock and only then install the OTA update.

Method # 1:
- Enable Internet on your smartphone (use WiFi).
- Start checking for updates: "Settings-All Options-About-phone System Update".
- There is a search for an update and when it is found it is offered to download it.
- Upload the file (patience, the process is long).
- After downloading the firmware file (/storage/sdcard0/googleota/update.zip) and verified, the system will offer to make a Backup. Then update the firmware.
Attention: it is often impossible to download / download (hangs at the "Download" stage for a very long time) or the firmware does not pass the test (the broken file is downloading) - just download the necessary firmware from the header and install it in manual mode (method # 2).

Method # 2:
- Download the necessary firmware file with the OTA-update (can be called anything).
- Place it anywhere on your device’s memory card.
- Turn off the phone.
- Turn on the phone while holding down the "Volume +" and "Power" (enter into Fastboot mode).
- In the menu that appears, select the Recovery option, then at the very rekaveri "- apply update from internal storage" and select your firmware *** zip.
- Wait until the end of the flashing.

Update partition / system
This method of firmware involves updating only the / system partition without resetting the device to factory settings.
Before updating please make sure that you are flashing system.img.gz from the firmware that was installed before. That is, if you had for example VIBEROM_V1.0_1419_ST_K900 firmware, then system.img.gz should be sewn from it. Otherwise, get a bootlap.

- To place a file in a folder system.img.gz / storage / sdcard0 / sdfuse /.
- Turn off the phone.
- Turn on the phone while holding down the "Volume +" and "Power" (enter into Fastboot mode).
- In the pop-up menu, select "SDUPDATE"
- Wait until the installation is complete. The device will reboot and all programs installed before the flashing will remain in place.

A phased solution in the correction of errors 4, 7-9, 12% (with the addition)
We readhere

Possible solutions for 4% and 9% errors when flashing through MFT
We readhere + here

Possible solution to a missing IMEI problem
We readhere

Possible solution to radio_firmware_6360 error
We readhere

Text manual on the transition to AOSP (CM10.2)
We readhere

Video instructions


Route / Recovery
Play Market
Kernels
miscellanea
Remapping internal memory
Skype version running on Android 4.3+ firmware
How to enter safe mode
Owners Club Lenovo IdeaPhone k900
How to backup firmware

Font replacement for firmware based on 4.3
4) Tweak of the system: optimization of the processor, drawing the interface, improving the work of "Asphalt 8":watch. Perhaps the placebo is not proven.Source and new versions
5) How to add in Settings: Battery consumption in the Device section:watch.
7) Pro AnTuTu:to read
8) In case of problems with WI-FI:
Option 1: Go to post
Option 2: to read. Read more:thisprog itselfWiFix.
9) Xposed Framework for x86 -watch, forum threadВ® [FRAMEWORK] Xposed, the program requires ROOT. Application for changing applications and firmware settings without the need for their decompilation, compilation and signature. The program features -watch
How to install the NORMAL version of Xposed on any Vibe firmware and ROW 4.3
10) Lenovo K900 engineering codes:watch
11) Set lenowo weather and instructions for proper installation from the SW. Kraminski -go to post
12) Topics for ROW firmware
13) If you have problems with applications on Chinese firmware (viberom, etc.) - "the application is not supported on your device" - you can use the programmarkethelper.
14) Radio modules + CLV.6360.MODEM.01.1326.B + CLV_6360_MODEM_01.1341.B
15) Lenovo K900 Problems with the work of GPS and their solution. Modems, call quality and 3G from different operators.
16) Program for hackinggames for the x86 platform
17) List of programsthat can be removed from viberom-based firmware.
19. Camera, dialer, LenovoPowerfor row 288. Thank you say rrromka.
21. How to enable advanced developer menu.
22. If there is a problem with charging your phonemessage.
23. Xposed installer for VibeROM
24. patch for recovery that removes Gapps from the system

Survey Screenshots
Attached Image

Attached Image

Attached Image



Topics Curator - XXX-Man

Post has been editedXXX-Man - 26.08.20, 21:14
Reason for editing: Editing header



Rep: (11)
Does anyone know about the update K900_1_S2_019_1151?
http: // cs3-4.savagemessiahzine.com.to / 5555869.png.


link to firmwarehttp://aotapoller.appspot.com/polls/lenovok900.

Post has been editedstmc - 26.12.14, 01:07



Rep: (969)
* STMC,
This is Viberom_v1.0_1403_7_st_k900.



Rep: (130)
Hello everyone, I brought the train and batteries and was surprised
Attached Image


Post has been editedctrlSoft - 26.12.14, 12:01



Rep: (1)
A new update came out .... not kit-kat, but at least do not forget ...: thank_you:
Attached Image


Post has been editedFeodorus - 26.12.14, 23:15
Reason for editing: Removed the screenshot under the spoiler



Rep: (1601)
If you update the error I wanted to see what is behind the ONGNA) on (6.16MB))))

Post has been editedLINK.KZ - 26.12.14, 17:46



Rep: (650)
Lenovo K900 unlocker

Attached Image

Description: Utility to disable the signature test / unlock loader Lenovo K900.
Important: Unlocking is possible only on Android 4.3 firmware (preferably the last 1418-1419 and stitched with MFT). On the already installed firmware android 4.2.2 and Android 4.2.1, the unlock is impossible. If you have the Android 4.2.2 firmware, you can make a nandroid backup, flash Viberom 1418-1419 with MFT, make an unlock and restore the Nandroid using a custom recovery [Checked - works]. If you have Android 4.2.1 (ROW), you can try to do the same as with 4.2.2, but there is no guarantee that the firmware will start. When firmware using InB (for Android 4.3 only), custom recovery and OTA update the unlock remains.
Unlocking instructions:
- Install ADB / FastBoot Drivers on the Device;
- connect the phone using the cable date to the PC;
- in the phone settings include "USB debugging";
- Start the utility and wait for it. The phone will be automatically rebooted into the DroidBoot.
Recycling instructions:
- Just flash any firmware using MFT.
Download: Attached fileUnlocker-k900.rar (885.36 KB)

Denial of responsibility: The author of the utility is not responsible for the harm caused to your devices, as a result of rampant actions when using the above-mentioned software. Remember: Disabling Signature Check / Unlocking the bootloader deprives you of guarantees on the device.

Post has been editedXXX-Man - 22.02.15, 20:14



Rep: (12)
The update does not work, when updated it gives an error. What is very strange, there is anyone any ideas about this. Yes, I apply the update itself.

Attached files

Attached fileupdate.zip(6.16 MB)



Rep: (363)
SVENFON @ 12/26/2014, 22:42*
Who has any ideas about this.


Recovery is not native to you?



Rep: (1)
Hello everyone! He became the owner of Lenovo to 900! Came with firmware 4,2,2 k900-1-S-2-019-0142-130927! Not satisfied with the translation not full! Who can advise - an excess firmware with full Russification! infection Blogador All !!!



Rep: (1966)
* sovet123 , last firmware from the cap, put and you will be happy



Rep: (1)
* Bespectacled
And she is stable without bugs! And exactly what to put them are somewhat there as much as I understand it, if you can poke there! Inhadow I thank !!

Post has been editedsovet123 - 26.12.14, 23:47



Rep: (650)
SVENFON @ 12/26/2014, 23:42*
The update does not work, when updated it gives an error.

Very interesting update, patches not only system files, but also boot (as not ashamed Lenovo still develop 4.2.1!), Droids and even a modem. Apparently so that you should stand stock droid 4.2.1 at 800 MB, maybe I still do not like the root.



Rep: (79)
XXX-MAN @ 12/26/2014, 20:23*
Lenovo K900 unlocker


And if after unlocking, go to 4.2.2, the unlock will remain?



Rep: (650)
Akamanah91 @ 12/27/2014, 01:14*
And if after unlocking, go to 4.2.2, the unlock will remain?

XXX-MAN @ 12/26/2014, 22:23*
When firmware using INB (Android 4.3 only),custom recovery And the OTA update the unlock remains.

We read carefully - only when firmware using custom recovery. Tomorrow-day after tomorrow I will lay out normal images of CWM and TWRP custom recovery images, for now you can use those that are in the header.

Post has been editedXXX-Man - 27.12.14, 00:29



Rep: (1966)
* sovet123 , Custom ROW 0498 - I have it, very satisfied. Stable and all Russified, and the root is



Rep: (12)
XXX-MAN @ 12/27/2014, 02:12*
Very interesting update, patches not only system files, but also boot (as not ashamed Lenovo still develop 4.2.1!), Droids and even a modem. Apparently so that you should stand stock droid 4.2.1 at 800 MB, maybe I still do not like the root.



Yes, I also remembered it, but that's what I wondered what exactly they attacked the bud and in the modem, to put risks, and suddenly some kind of security enhancement or something like that.


And on the XDA they addressed them there Romodelas at least someone can be drove anyone, somebody CM is already preferably 12, but it is possible to sit on 11, it is better than on Jelly Bean.

Post has been editedsvenfon - 27.12.14, 07:37



Rep: (1)
Hello everyone! I am available for the OFTP, but I can not find an instruction on installing firmware throughsdfuse. Just do not want to get a brick, I have a firmware costs 4,2,2 1-S-2-019-0142--130927 I want to put this time this 4,2,1 k900_row_1_s_2_009_0498_140723_onlyroot How to make it right (do or not Make discharges and T, e), just do not kick much! Thank you. Thank you and Happy New Year! Everyone!



Rep: (5)
* XXX-Man,
I'm sorry, sir, could you make the Unlock file for Zenfone 4, like what you do.

Or how and where can I get this file? Can you teach me?



Rep: (650)
Anwarmov @ 12/27/2014, 10:05*
Or how and where can I get this file? Can you teach me?

I`m Sorry But i Think Can`t Help. Anyway Please Pm Me, Let`s See What We Can To Do With Your Device.
SVENFON @ 12/27/2014, 08:36*
CM is certainly preferably 12, but you can and on 11 are getting better than on Jelly Bean to sit.

Maximum for which so far can count - this is to see 10.1, and there are no sources for the rest. We will invent anything.

Post has been editedXXX-Man - 27.12.14, 10:03



Rep: (1328)
Sovet123 @ 12/27/2014, 15:57*
I am expected for the office but I can not find the firmware installation instruction via SDFUSE.

Well, how did you not find, but what about it?
Attached Image


Full version    

Help     rules

Now: 10.01.21, 03:45