Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Lenovo K900 - Firmware |
Message#1 27.06.13, 16:34 | |
I want to believe ... [offline] Group: Friendssavagemessiahzine.com Messages 1549 Check in: 24.12.09 Apple iPhone 7 Plus Reputation: 83 | Lenovo K900 - Firmware Lenovo K900 Description | Discussion � | Purchase � | Accesories � | Marriage � | Modifications of software and decorations � | Firmware � ↓↓ Firmware, modems, kernels, programs and everything you need for the Lenovo K900 can be found here. ↓↓ Important information If during the firmware using a PC in the log you havesimilar to ( Windriver Error: 0x20000015 download) error, then the flash memory of the device died and its replacement is required. Detailed description of the replacement of flash memory is described.here.+++ At all, without exception, firmware and modem versions, the device loses the network when the mobile Internet is turned on. Someone more often, someone less, but the problem is present. No solution. As "crutches" try to flash different versions of modems and choose the one you need with the best connection. +++ In order to avoid all sorts of errors, mashing IMEI, scaling and other things, it is strongly recommended not to flash the device with a PC (MFT, xFSTK, PFT) without any particular need. Flash the device using INB (SDFUSE method), or CWM / TWRP recovery and no errors are provided for you. Flash the device using a PC only to restore the "bricks". Drivers and Utilities HereandhereAll versions of drivers and utilities for firmware using a PC Lenovo K900 unlocker- utility to disable verification of signature / unlock bootloader Lenovo K900 Lenovo K900 partition calculator- resizing device sections Lenovo K900 kitchen 1.24- Utility for making changes to the firmware image for Lenovo K900 Atom flasher- Recovery / boot / droidboot firmware utility directly from Android phone Firmware >>>Newbies first readFAQby firmware<<< Official firmware Android 4.2.1 [International]: K900_ROW_1_S_2_009_0553_141125_CPUsign_full [PC] K900_ROW_1_S_2_009_0131_130727_EasternEurope_DVT3_CPUsign_full [PC] Android 4.2.2 [Chinese]: Android 4.2.2 [VIBEROM]: Android 4.3 [VIBEROM]: Firmware based on official Android 4.2.1 [International]: K900.421.ROW.498 MIUI MOD [CWM] K900.421.ROW.498 Version №2 [CWM] K900.421.ROW.498 Android L Mod [INB] K900.TWRP | CWM.ROW.533-ODEX [CWM] K900.421.ROW.498.01 [CWM] K900_0131_130727_EasternEurope_custom_L-F_v3 [PC] Android 4.2.2 [Chinese]: K900_0142_130927 material style [CWM] K900.422.0142.05 [CWM] K900.422.0142.038 [CWM] K900_1_S_2_019_0142_130927_L-F.RU [PC] Android 4.2.2 [VIBEROM]: VIBEROM.1403.8 material style + Version number 2 + Version number 3 [INB] , [CWM] VIBEROM.1403.7 material style [CWM] K900.422.VIBEROM.1403.8 build 047 [CWM] K900.422.VIBEROM.1403.7.05 [CWM] VIBEROM_V1.0_1403_7_ST_K900_onlyROOT [INB] VIBEROM_V1.0_1403_7_ST_K900 RUS [INB] VIBEROM_V1.0_1403_6_ST_K900 RUS mirror Dropbox [INB] VIBEROM_V1.0_1403_6_ST_K900_onlyROOT [INB] VIBEROM_V1.0_1351_4_K900 RUS [INB] Android 4.3 [VIBEROM]: VIBEROM_V1.0_1418_K900_RU [INB] VIBEROM_V1.0_1419_DEV_K900_BETA [INB] VIBEROM_V1.0_1419_K900_CWM / TWRP [CWM] VIBEROM_1.0_1419_DEV_K900 Mod light [INB] K900.43.VIBEROM.10.1418.02 [CWM] QuBex ROM V8 RUS [INB] Custom firmware Cyanogenmod 12.1 CyanogenMod 11 + update + patch + CyanogenMod 11 Last [CWM] CyanogenMod 10.2 beta [CWM] CyanogenMod 10.2 [CWM] Instructions IMEI repair method: Known firmware installation methods: 1) Ota (PC is not required for flashing) - the firmware file is used update.zip . The firmware file must be placed in the / storage / sdcard0 / googleota / or / storage / sdcard0 / folder. if this is a full firmware update (usually a file size is more than 500 MB), then a full reset is done when flashing. If this is a partial firmware update (usually the file size is less than 500 MB), then all user settings and programs will be saved during the flashing. 2) SDFUSE (no PC required for flashing): - a set of firmware files boot.bin / droidboot.img / system.img.gz / ... is used - usually the firmware is merged in this format. All firmware files must be placed in the / storage / sdcard0 / sdfuse / folder. When flashing, a full reset is done. -used firmware file with resolution* .inb - firmware in this format are rare. The firmware file must be placed in the / storage / sdcard0 / sdfuse / folder. When flashing, a full reset is done. 3) MFT (PC is required for flashing) - usually, the firmware merges in exactly this format. All firmware files are placed on the PC, flashing comes from the PC. When flashing, a full reset is done by default. 4) xFSTK - "manual" method of installing firmware, analogue MFT : to read 5) Update partition / system / - file is used system.img.gz current firmware. The firmware file must be placed in the / storage / sdcard0 / sdfuse / folder. When flashing, all user settings and programs are saved. SDFUSE firmware update - Download the appropriate firmware. - In the root of the internal memory of the phone to create a foldersdfuse (/ storage / sdcard0 / sdfuse /). - Put the firmware files into it (or in* .inb ). - Turn off the phone. - Turn on the phone while holding down the "Volume + "and" Power "(enter the mode Fastboot ) . - In the menu that appears, select "SDUPDATE "(menu navigation is done with the keys" Volume + "and" Volume - ", enter the menu by pressing" Power "). - Wait until the installation is complete. - It is recommended to dowipe (reset to default). IMPORTANT: Please note that before updating the phone software, the battery has enough battery power (at least 20%). Instructions on firmware using Manufacturing Flash Tool (MFT) - Download all the necessary drivers and utilities (see the spoiler "Drivers and Utilities") - Install IntelAndroidDrv1.2.0. If swears on incompatibility (on Win8 64) - run in compatibility mode with Windows7 - Install iSocUSB-Driver-1.0.2 - Install ManufacturingFlashTool - Run ManufacturingFlashTool. - File-Settings. Check the box next to "Save statistics" and select the storage location for the log file. - In the SOC devices line, you must specify the identifiers of your device. To do this, you need to connect the switched off device to the PC. After installing the driver, the CloverviewPlus Device appears in the Windows Task Manager in the IntelSoc category. You will have a few seconds to right-click on this device to call its properties (if you don’t have time, the device will disappear from the list and you will have to repeat step 7) (if CloverviewPlus Device is not caught: watch). Going to the properties of the CloverviewPlus Device device, go to the Details tab. In the "Property" drop-down list, select "Equipment ID". Values after "VID_" and "PID_" must be entered in the appropriate fields. Click OK. ATTENTION! You only need to change the top line "SOC devices". The string of Android devices does not change! As practice has shown, the VID and PID indicated in the screenshot above are similar for all K900 devices. Feel free to put them and do not invent others. If you do not trust us (we are LF), then look at the ID of the non-ADB driver, namely the ClowerviewPlus driver! - Disconnect the device from the PC. - Through the menu File - Open and select the data file, which is located in the folder with the firmware (XML format). - Connect the switched off device to the PC. The firmware will start automatically. It should also be noted that not always the first time the firmware is completed successfully. Important: If you have problems installing the driver and you do not want to suffer, put it in a virtual machine or in the second section Windows 7 x86 . More detailed instructions with all screenshots can be found.here Instructions on firmware using Phone Flash Tool (PFT) We readhere OTA firmware update !Attention! This way of updating the firmware is possible ONLY if you have installed a stock (factory) recovery. If you have installed CWM / TWRP, then first flash the stock and only then install the OTA update. Method # 1: - Enable Internet on your smartphone (use WiFi). - Run update check: "Settings-All Options-About Phone-System Update ". - There is a search for an update and when it is found it is offered to download it. - Upload the file (patience, the process is long). - After downloading the firmware file (/storage/sdcard0/googleota/update.zip ) and its verification, the system will offer to make backup. After that, update the firmware. Attention: it is often impossible to download / download (hangs at the "Download" stage for a very long time) or the firmware does not pass the test (the broken file is downloading) - just download the necessary firmware from the header and install it in manual mode (method # 2). Method # 2: - Download the necessary firmware file with the OTA-update (can be called anything). - Place it anywhere on your device’s memory card. - Turn off the phone. - Turn on the phone while holding the keys "Volume + "and" Power "(enter the mode Fastboot ). - In the menu that appears, selectRecovery , then in the very recovery " - apply update from internal storage "and select your firmware file ***. zip - Wait until the end of the flashing. Update partition / system This method of firmware involves updating only the / system partition without resetting the device to factory settings. Before updating please make sure that you are flashing system.img.gz from the firmware that was installed before. That is, if you had for example VIBEROM_V1.0_1419_ST_K900 firmware, then system.img.gz should be sewn from it. Otherwise, get a bootlap. - Place filesystem.img.gz to folder / storage / sdcard0 / sdfuse / . - Turn off the phone. - Turn on the phone while holding down the "Volume + "and" Power "(enter the mode Fastboot ). - In the menu that appears, select "SDUPDATE " - Wait until the installation is complete. The device will reboot and all programs installed before the flashing will remain in place. A phased solution in the correction of errors 4, 7-9, 12% (with the addition) We readhere Possible solution to a missing IMEI problem We readhere Possible solution to radio_firmware_6360 error We readhere Text manual on the transition to AOSP (CM10.2) We readhere Video instructions Route / Recovery Ruth: Kingroot Vroot Kingoroot Detailed instructions for obtaining the root using a PC Lenovo K900 CWM launcher | ROOT installer 0.2 Root-utility-SuperSU-2.02 Recovery: Important CWM-based recovery 6.0.3.7 TWRP recovery 2.6.1.0 TWRP recovery 2.8.5.0 TWRP recovery 2.8.5.0 RUS AROMA Filemanager x86 Play Market Replacing GAPPS with free analogues Fix for Play Store [auto-update disabled] Google play GApps for Android KK Smart GApps Installer - installation of the Play Store on a "live system" using a PC GApps + Slim pack Kernels miscellanea Remapping internal memory Skype version running on Android 4.3+ firmware How to enter safe mode Owners Club Lenovo IdeaPhone k900 How to backup firmware Font replacement for firmware based on 4.3 4) Tweak of the system: optimization of the processor, drawing the interface, improving the work of "Asphalt 8":watch . Perhaps a placebo is not proven. Source and new versions 5) How to add in Settings: Battery consumption in the Device section:watch. 7) About AnTuTu: to read 8) In case of problems with WI-FI: Option 1: Go to post Option 2: to read. Read more:thisprog itselfWiFix. 9)Xposed framework for x86 - watch , forum thread ® [FRAMEWORK] Xposed , the program requires ROOT. Application for changing applications and firmware settings without the need for their decompilation, compilation and signature. The program features - watch How to install the NORMAL version of Xposed on any Vibe firmware and ROW 4.3 10) Lenovo K900 engineering codes:watch 11) Set lenowo weather and instructions for proper installation from the SW. Kraminski -go to post 12) Topics for ROW firmware 13) If you have problems with applications on Chinese firmware (viberom, etc.) - "the application is not supported on your device" - you can use the programmarkethelper. 14) Radio modules + CLV.6360.MODEM.01.1326.B + CLV_6360_MODEM_01.1341.B 15) Lenovo K900 Problems with the work of GPS and their solution. Modems, call quality and 3G from different operators. 16) Program for hackinggames for the x86 platform 17) List of programsthat can be removed from viberom-based firmware. 19. Camera, dialer, LenovoPowerfor row 288. Thank you say rrromka. 21. How to enable advanced developer menu. 22. If there is a problem with charging your phonemessage. 23. Xposed installer for VibeROM 24. patch for recovery that removes Gapps from the system Topics Curator - XXX-Man Post has been editedsnekt - 19.02.19, 19:27 Reason for editing: Internal memory resampling |
Message#2 27.06.13, 17:02 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1808 Check in: 23.09.12 Xiaomi Mi Mix 2S 6/64 Reputation: 210 | good time. let's start the topic. : skull:: skull:: skull: ! SD software update instructions for Lenovo k900. 1. Download the appropriate firmware. 2. Create a folder in the root of the internal memory of the phonesdfuse. 3. Unpack the downloaded firmware file in it* .inb. Make sure the directory contains only one.* .inb file. 4. Turn off the phone. 5. Turn on the phone while holding down the "Volume +"and"Power". 6. In the menu that appears, select "sd update"(menu navigation is done with the keys"Volume +"and"Volume -", enter the menu - key"Power"). 7. Wait until the installation is complete. 8. It is advisable to make all the wipes before and after the firmware. * Please note that before updating the software of the phone the battery has a sufficient charge (at least 20%). ! K900_ROW_1_S_2_009_0081_130620_MiddleEast_DVT3_CPUsign_full.rar. source code. ! K900_ROW_1_S_2_009_0047_130603_SoutheastAsia_DVT3_CPUsign_full.rar source code. password:bbs.lenovomobile.com ! K900_1_S_2_009_0188_130614.rar + Root source code. password:www.lenovohome.net ! K900_1_S_2_009_0166_130527_DVT3_CPUsign_SD.tar.gz source code. ! K900_1_S_2_009_0145_130508_DVT3_CPUsign. Rar source code. password:bbs.lenovomobile.com K Made a cap with current changes Post has been editedkraminski - 27.08.13, 20:56 -------------------- Xiaomi Mi Mix 2s [6\64white] Alienware 15 R1 [15.6 "FHd \ i7-4720HQ \ GTX980m \ 16Gb \ 256Gb ssd \ 1Tb ssd] |
Message#3 27.06.13, 17:43 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | Instructions on firmware using Manufacturing Flash Tool (MFT) 1. Download all the necessary drivers and utilities,for example from here 2. Install IntelAndroidDrv1.2.0. If swears on incompatibility (on Win8 64) - run in compatibility mode with Windows7 3. Install iSocUSB-Driver-1.0.2 4. Install ManufacturingFlashTool 5. Run ManufacturingFlashTool. 6. File-Settings. Check the box next to "Save statistics" and select the storage location for the log file. 7. In the SOC devices line, you must specify the identifiers of your device. To do this, you must connect the switched off device to the PC After installing the driver, the CloverviewPlus Device appears in the Windows Task Manager in the IntelSoc category. You will have a few seconds to right-click on this device to call its properties (if you don’t have time, the device will disappear from the list and you will have to repeat step 7). Going to the properties of the CloverviewPlus Device device, go to the Details tab. In the "Property" drop-down list, select "Equipment ID". Values after "VID_" and "PID_" must be entered in the appropriate fields. Click OK. 8. Disconnect the device from the PC. 9. File-Open and select the data file that is in the firmware folder (XML format). 10. Connect the switched off device to the PC. The firmware will start automatically. It should also be noted that not always from the first time the firmware is completed successfully. The problem is in the driver, it is hoped that over time, intel will update the driver package. -------------------- |
Message#4 02.07.13, 09:06 | |
Before .. I lived here)) [offline] Group: Honorary Gameday Messages 1371 Check in: 06.05.11 Samsung Galaxy S7 EDGE SM-G935F Reputation: 478 | real_kabaxan Here is a step by step instructionhttp://lenovo-forums.ru/topic/1423-faq-%D0...900/#entry25701 Pay attention to the installation of drivers, and the fact that it is the fourth. |
Message#5 04.07.13, 09:27 | ||
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1808 Check in: 23.09.12 Xiaomi Mi Mix 2S 6/64 Reputation: 210 | good time. ! ROOT K900_1_S_2_009_0204_130627_DVT3_CPUsignr source code. description. !ROOT directly on Linux? The firmware is official 130627 today. Add only root! Like no other change. - I am unconditionally responsible for my own qualities of the ROM, brush the package of any problem or you do not understand, can be directly to write new messages, or directly Sina microblogging @! weibo.com / icechiu - Note: This firmware is a pack of wire brush, machine brushes before performing data backup. - Tutorial brush: 3D1http://bbs.lenovomobile.com/forum.php?mod=...amp;extra=page% - Please, indicate! ! ! Support the music community. password:5lbq. Post has been editedserega_83 - 04.07.13, 09:32 -------------------- Xiaomi Mi Mix 2s [6\64white] Alienware 15 R1 [15.6 "FHd \ i7-4720HQ \ GTX980m \ 16Gb \ 256Gb ssd \ 1Tb ssd] | |
Message#6 05.07.13, 09:58 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1808 Check in: 23.09.12 Xiaomi Mi Mix 2S 6/64 Reputation: 210 | good time. ! Lenovo k900 MIUI_style +Root.rar build basedK900_1_S_2_009_0188_130614.rar description. ROM Creator: Young love to open Problems were repaired or changed (comparison software was released with the previous one): 1. millet MIUI style, removal of music desktop computers; 2. millet white battery icon; 3. optimize optimizations, remove all embedded software; 4. perfect join superuser privileges; 5. Integrated Andrews optimization gurus, rejected by Kai software source code. password:www.lenovohome.net ________________________________________________ ! K900_Root_0627_ByMouz.rar source code. Post has been editedkraminski - 27.08.13, 20:59 -------------------- Xiaomi Mi Mix 2s [6\64white] Alienware 15 R1 [15.6 "FHd \ i7-4720HQ \ GTX980m \ 16Gb \ 256Gb ssd \ 1Tb ssd] |
Message#7 06.07.13, 13:26 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | -------------------- |
Message#8 06.07.13, 16:14 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | oneofthem, They are put without root and work ... or maybe there is some kind of root in the firmware and therefore they work ... or the installer is so tricky ... try: D hake199, The latest, 204, Chinese version with root for MFT Post has been editedtimooosha - 06.07.13, 21:09 -------------------- |
Message#9 08.07.13, 01:39 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | asservice777, 1. The inb file is contained only in the firmware that is installed from the memory card, such archives have a CPUsign_SD message at the end. Inside this archive there is nothing but a file with the extension inb. 2. If at the end of the archive name is just CPUsign, then this is the firmware for the MFT. Inside the archive with such firmware, among a heap of files, there is a flash-DVT3-CPU-sign.xml file (the specific name may differ, but the extension is the same). 3. And finally, if the exe-file is in the root of the unpacked archive, then this firmware is installed without any third-party programs, the phone with USB debugging enabled is connected to the computer and the exe-file is started. Post has been editedtimooosha - 08.07.13, 01:45 -------------------- |
Message#10 12.07.13, 07:16 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1808 Check in: 23.09.12 Xiaomi Mi Mix 2S 6/64 Reputation: 210 | -------------------- Xiaomi Mi Mix 2s [6\64white] Alienware 15 R1 [15.6 "FHd \ i7-4720HQ \ GTX980m \ 16Gb \ 256Gb ssd \ 1Tb ssd] |
Message#11 13.07.13, 01:08 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | Reloaded 101 ROW onYandex -------------------- |
Message#12 17.07.13, 22:20 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 8253 Check in: 28.06.11 Reputation: 955 | 1) the tuzla is in the firmware in the res1.zip file, the command is copied to the flash phone <string>fastboot oem msdcard</ string> <timeout>400000</ timeout> <retry>2</ retry> <description>Mount sdcard</ description> </ command> <command> <string>fastboot flash /sdcard/res1.zip $ res1_file</ string> <timeout>400000</ timeout> <retry>2</ retry> <description>Flashing res1.zip</ description> </ command> <command> <string>fastboot oem unzip /sdcard/res1.zip</ string> <timeout>400000</ timeout> <retry>2</ retry> <description>Unzip res1.zip</ description> </ command> <command> <string>fastboot flash /sdcard/K900_res.md5 $ md5_file</ string> <timeout>400000</ timeout> <retry>2</ retry> <description>Flashing md5 file</ description> </ command> <command> <string>fastboot oem rescheck /sdcard/K900_res.md5</ string> <timeout>400000</ timeout> <retry>2</ retry> <description>Check md5 file</ description> </ command> And the idea should be shown when connecting a smart card to a PC. It is in the original 81, but deleted in custom 204. LenovoTool_1.2.3_os.exe.zip(64.88 MB) 2) here is a pack of topics:LenovoTheme.zip(23.14 MB) 3) videoplayer.speed.support is turned off everywhere. I did not torment Google much, but I did not give a superficial inquiry. 4) I read that the widi works partially. then it will be necessary to check what this parameter gives and why it was removed from the Russian prose. P.S. Why do I need all this? - I get acquainted with my future smart. gromovsn below - 8087 09ef And you checked in the device manager, do you have the same pid and view? Please note that the “SOC devices” line contains device identifiers, but they may differ for your device. You can view these IDs in Windows in Device Manager. To do this, turn off your K900 and connect it via a USB cable to your PC. Wait until the new hardware driver is installed. For some time after connecting to the PC (about 5 seconds), the “ClowerviewPlus Device” device will appear in the manager, right-click on it to open the context menu and select “Properties”. Go to the “Details” tab and find “ID device” in the drop-down menu. Opposite the letters "VID_" and "PID_" are the necessary numbers recorded in hexadecimal format. Post has been editedkraminski - 17.07.13, 22:31 -------------------- Xiaomi Mi MIX (6/256) | Global Beta (always last) |
Message#13 17.07.13, 22:47 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 582 Check in: 28.03.11 Samsung Galaxy Note9 Exynos Reputation: 44 | [email protected], 23:37 When you start the MFT - rechecked everything in SOC, and below in Android devices the default is VID 8087 Pid 09EE. Do you need to change any values here? No way |
Message#14 17.07.13, 23:24 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 582 Check in: 28.03.11 Samsung Galaxy Note9 Exynos Reputation: 44 | gromovsn You put the driver from the deviceLeDrivers_K900.msi? How does the Windows behave? Turned off for a long time, more than 2 minutes? This error is a frequent guest for fans of haste. P.S. I corrected the post on the previous page about the themes and attached a link to them. Post has been editedORiONstar - 18.07.13, 02:18 |
Message#15 18.07.13, 12:37 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 582 Check in: 28.03.11 Samsung Galaxy Note9 Exynos Reputation: 44 | gromovsn Download all drivers beforehand.from here. |
Message#16 23.07.13, 11:30 | |
Before .. I lived here)) [offline] Group: Honorary Gameday Messages 1371 Check in: 06.05.11 Samsung Galaxy S7 EDGE SM-G935F Reputation: 478 | Catchhttps://disk.yandex.ru/public/?hash=RtXJqZt...D&locale=en Shl. To the one who gave it to me - in anticipation of indignation, I will tell you right away, do not be outraged neither here nor in hp, I bought it from you for $$, therefore I do what I want;) C) |
Message#17 06.08.13, 11:23 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 249 Check in: 18.11.11 Lenovo K900 Reputation: 5 | revised the presentation of the K900. Looks like a wireless projector is a separate device to which you can transfer an image from our body like thishttp://hdmikabel.narod.ru/index/0-72 Post has been editedBBV1962 - 06.08.13, 11:29 |
Message#18 06.08.13, 12:54 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1117 Check in: 23.07.11 Google pixel 2 Reputation: 125 | so. About mirakast - we have it by default, in the settings of the "Wireless Projector" screen. Works,I wrote a reviewermonth ago. What are you wise there? In China, the easiest way to roll Gugloservisy - installthis, also wrote for a long time and laid out. But, of course, if someone rebuilds the firmware and puts gugloservices in there, it will be easier for everyone) Post has been editedtimooosha - 06.08.13, 12:56 -------------------- |
Message#19 07.08.13, 07:01 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 8253 Check in: 28.06.11 Reputation: 955 | Yes. file is deodexed. the pictures are in / res / drawable-xxhdpi /. if on a computer: 1) open SystemU.arkas archive in winrar 2) copy the / res / drawable-xxhdpi / folder to any place 3) see what needs to be changed 4) find / make the necessary pictures - the height should be 60 pixels; but the width is 110 - if the width is smaller, it is not very scary. 5) rename according to the file name in .ark 6) copy with replacementwithout compressionin SystemU.ark / res / drawable-xxhdpi / 7) replace the file in / systems / apr /. on the mobile is the same, it is better to use the total - never let down. the main thing in the arch copy pictureswithout compression. -------------------- Xiaomi Mi MIX (6/256) | Global Beta (always last) |
Message#20 07.08.13, 14:22 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 63 Check in: 10.04.12 Blackberry key2 Reputation: 10 | Boatswain2004,system can be unpacked from the firmware, the file is calledsystem.img.gz . The version of the installed firmware and the system version must match. You can flash the system through the fastboot.exe program from the Manufacturing Flash Tool (console, by default it is in Program Files). In cmd.exe: fastboot.exe erase system fastboot.exe flash system system.img.gz As already mentioned, firmware can be found onlenovo forum. If you need only root, you can downloadthis system.img.gz. I did it for myself by dragging only the root from the custom firmware to the net :) Added 08/07/2013, 2:21 pm: Tonka82 Here: http://lenovo-forums.ru/topic/1817-customr...30727-ot-l-fru/ Create a SDFUSE on a flash drive and unload an archive with firmware there. Then through droidboot choose sdupdate. Added 08/07/2013, 14:22: Is there a linuksoid in the subject? :) fastboot works fine? For some reason, I do not see the device. |
Message#21 07.08.13, 17:59 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1808 Check in: 23.09.12 Xiaomi Mi Mix 2S 6/64 Reputation: 210 | good time. everyone who wants to change something in the visual componenthere. }-) but until a normal recovery is drunk on this device, all dances with tambourines are extremely expensive. because without a normal system backup ... -------------------- Xiaomi Mi Mix 2s [6\64white] Alienware 15 R1 [15.6 "FHd \ i7-4720HQ \ GTX980m \ 16Gb \ 256Gb ssd \ 1Tb ssd] |
mobile version | Now: 06.23.19, 10:18 |