> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


25 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> teXet TM-7024 - Firmware
FiliN271
Message#1
26.06.13, 20:45
Lonely birds
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2472
Check in: 16.09.08
Motorola Moto E (4th Gen)

Reputation:-  248  +

teXet TM-7024 - Firmware
PictureteXet TM-7024
Description | Discussion | Firmware

Important information
Who has Wi-Fi on the chipsetRalink(it is possible to learn through ADB, the lsmod command)in firmware 4.2.2 it will not work!Decisionlooking for.

Drivers and Utilities

Firmware
Official firmware

Unofficial firmware
Unofficial firmware (4.1.1)

Unofficial firmware (4.2.2)


Instructions
Instructions for changing software
1) Turn off the device.
2) Connect to PC.
3) Run the utility. Select firmware (SelectImg)
4) Hold the HOME button, insert the cable and press the ON button (short press 5 times). Windows will detect the new device.
5) Install the driver (for 64bithttp://texet.ru/save.php?file=/files/UsbDr...1333694087.rar).
6) Reconnect the device to the PC.
7) When asked about formatting, click Yes, then Yes again.
8) Wait until the end of the software change process.

Firmware via PhoenixCard (for those who can not flash through LiveSuit)


miscellanea

Survey Screenshots
Attached Image



There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 10.04.19, 00:26
Reason for editing: Application drain from TeXeT TM-7024 Android 4.0.4 firmware
FullBlooded
Message#22
30.06.13, 13:44
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 165
Check in: 20.03.12
ZUK Z2

Reputation:-  6  +

Ruslan-79,
There are wafer drivers for 4.2.2, only the waffle doesn't work anyway.

ZY
Regarding the power consumption of the tablet on 4.1.1. Just remove all unnecessary software that hangs in the background. The tablet does not need contacts, phone application, etc. Rummage in / system / app.
Turn on the flight mode, and only then turn on / off the wafer in the settings. This will help get rid of the "Network Connection" tab on the battery.
Yesterday I tested the battery, I did not pity me to stop at 4.0.4 official.
The battery is 100% charged, the waffle is turned off and the movie is launched in the MX player 1.46GB in a circle at 50% brightness and sound (headphones connected). Lasted 3 hours and 10 minutes, 2% of the battery left. (up to 1% decided not to torture, so as not to miss the full charge and fix the exact time of work).
I'd like to compare a similar result with stock 4.0.4.
ZYY.Y. I've been using the tablet since February, it was extremely rarely charged, sometimes I was lying in my backpack as a reading room for weeks. It turns out - the battery is almost virgin. :)
We dream about working Wi-Fi on 4.2.2. :)
a0473
Message#23
01.07.13, 14:29
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 64
Check in: 11.11.07
teXet TM-7024

Reputation:-  15  +

Anyone who has already opened 7024, write what kind of WiFi module is there yet.
Ruslan-79
Message#24
01.07.13, 20:12
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 04.02.12
Doogee X5 Pro Galicia

Reputation:-  4  +

a0473,It does not help?
Elixir
a0473
Message#25
01.07.13, 22:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 64
Check in: 11.11.07
teXet TM-7024

Reputation:-  15  +

There is no such thing. I need a name, for example, Ralink RT5370N or realtek 8188eus.
We probably have something like Ralink RT5370N.
Ruslan-79
Message#26
01.07.13, 22:56
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 04.02.12
Doogee X5 Pro Galicia

Reputation:-  4  +

TIAN WU-WL-211 (probably so)

Post has been editedRuslan-79 - 01.07.13, 22:57
FullBlooded
Message#27
02.07.13, 15:55
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 165
Check in: 20.03.12
ZUK Z2

Reputation:-  6  +

a0473,
He most likely does not pull the N-standard, always the maximum in the speedtest is 40 Mb / s.
At the same time, the Lenovo p700i smartphone almost 100 squeezes out on the same access point.
Mosquito2000
Message#28
02.07.13, 16:46
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 174
Check in: 04.07.12
LG G2

Reputation:-  5  +

hey guys, how about trying to get sgs2 firmware?
he seems to have a tez har-ki almost
except for percent 1.2 GHz

Oh already noticed that there is only 4.1.2

Post has been editedMosquito2000 - 02.07.13, 16:48


--------------------
Your ad here could be ...
Ruslan-79
Message#29
02.07.13, 20:05
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 04.02.12
Doogee X5 Pro Galicia

Reputation:-  4  +

FullBlooded @ 07/02/2013, 15:55*
He most likely does not pull the N-standard, always a maximum in the speedtest 40 Mb / s. At the same time, the Lenovo p700i smartphone squeezes out almost 100 on the same access point.

from the office. The site says about 72.2 Mbps
FullBlooded
Message#30
02.07.13, 20:43
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 165
Check in: 20.03.12
ZUK Z2

Reputation:-  6  +

Mosquito2000,
the filling is generally different, only that Mali-400 is here and there.
There is a scream platform.
Ruslan-79,of Whose site? Texet, or the manufacturer of the Wi-Fi chip?
More than 30-40 will not squeeze out, as a maximum, because of the speed of writing / reading the built-in flash drive.

Post has been editedFullBlooded - 02.07.13, 20:44
Ruslan-79
Message#31
02.07.13, 20:58
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 04.02.12
Doogee X5 Pro Galicia

Reputation:-  4  +

FullBlooded
on the tech there is a Declaration read it, just there the characteristics of the speeds are described in the modes and at what frequencies
jeni
Message#32
06.07.13, 09:53
one
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 814
Check in: 30.09.06
Samsung Galaxy S8 Exynos

Reputation:-  63  +

Anyone who has already opened 7024, write what kind of WiFi module is there yet.

hold on

Attached images
Attached Image


--------------------
Moto 520, Moto t-192, Moto c-350, Sam x-100, Sam x-600, Sony K-500i, Qtek s110, HP 6510, HP 6515, Mio A701, Sam D-880, Eten m700, HTC Kaiser , Sam D-780, HTC HD2, Sam B-5702, Sam C-3322, Sam GT-N7000, LG A 290, Asus TF300T, Nokia x-2 02, Nokia Lumia 920, Nexus 7 WiFi 2, Nexus 5, Nexus 5X, Toshiba Clik 10, Gear S3, Sam S7,8 ..
FiliN271
Message#33
06.07.13, 16:44
Lonely birds
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2472
Check in: 16.09.08
Motorola Moto E (4th Gen)

Reputation:-  248  +

And I said realtek. Just what does this give us?


--------------------

ROM: LineageOS 6.0.1 download


In lichku not a single question that is answered in the topic.
dark70
Message#34
06.07.13, 23:12
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 216
Check in: 25.11.08
HTC EVO 3D

Reputation:-  1  +

I found out after searching the forum that I need to change the file vold.fstab with help. batch file to make the memory card visible.
I started this batch file and then it nakosyachil.
Now through the conductor from the tablet you can not see at all, neither the main memory nor the card.
And when I connect to the computer via USB, I see only two SD cards in the devices, but I can’t go to the computer with any of them.
Tried to reflash, also nifiga
He writes that the device was not found when I click on the "system update".
I tried to go into the firmware mode, I press the "house", at the same time I press the power. I am invited to respond to disable the device.
As soon as they sting, at different speeds, the answer is one.

In general, now the tablet itself writes that the memory card is not connected and I connect it to the computer, also nifiga

How can I reflash to return to the factory settings? And that hard rezet does not help.
Maybe somehow through Wi-Fi you can?
Put Total Commander, but there only system memory is visible. And again, the memory card is not connected. He writes first that it is faulty and offers formatting. I agree, but to me in response, that it is not connected and then again in a circle: (


--------------------
HTC A8181 Desire
Prology MDN-1750T
dark70
Message#35
07.07.13, 02:49
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 216
Check in: 25.11.08
HTC EVO 3D

Reputation:-  1  +

dark70,
Ways of firmware in this topic are no longer discussed.

mdaaaa :(
It seems that in this too.

that's what climbs
Damn, the picture is not inserted :(
http://s018.radikal.ru/i527/1307/cf/35fd0fc2b321.jpg
here's another
http://s019.radikal.ru/i634/1307/45/97b503d616db.jpg

Post has been editeddark70 - 07.07.13, 03:36


--------------------
HTC A8181 Desire
Prology MDN-1750T
dark70
Message#36
07.07.13, 08:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 216
Check in: 25.11.08
HTC EVO 3D

Reputation:-  1  +

Honestly, yesterday 4 hours was bogged down, but I could not flash it.
I will describe what I did, but maybe I misunderstood the instructions
1) Turned off the device completely, i.e. I pressed the power button and YES answered the shutdown question.
2) I connected the device with a cable to my computer. In the device I tried both with debugging on YUSB, and without.
3) Run the LiveSui utility and select the firmware file there.
4) Press the "Home" button, then many times the "Power" button, while continuing to hold the "Home" button.
After that, the device began to boot. Winda on the computer did not determine anything and was silent.
5) I tried to install the driver, but Winda did not give, said that the best ones are already there.
Manually tried to specify the driver, also did not give.
6) Peretykal cord YUSB. Silence in general. Well, unless the message on the device that it is connected in the drive mode

I tried to do all of the above, but in the first paragraph I did not turn it off completely, but simply briefly pressed "Power".
In this case, the device simply turned on when I repeatedly pressed "Power" while holding down the "House".

In general, I am in a panic: (
The only thing that was achieved is manually through the Totall Commander edited the file vold.fstab
so that in it were like from the factory, here are these lines
dev_mount sdcard / mnt / sdcard
dev_mount extsd / mnt / extsd
After this error that the card is not formatted is gone.
But even after inserting a memory card, the device does not see this card at all, and even in the menu the connection point of the card is not active.


--------------------
HTC A8181 Desire
Prology MDN-1750T
FiliN271
Message#37
07.07.13, 09:53
Lonely birds
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2472
Check in: 16.09.08
Motorola Moto E (4th Gen)

Reputation:-  248  +

dark70,
This is exactly what is being discussed. Connect to the BB to be turned off, holding and holding the home button, after connecting the home button to continue to hold, and quickly (5-7 times) to press the power button. BB will determine the device and then install the driver. After installation, pull out the cable and do the same. LivSuit will ask a question about formatting the device, answer both questions in the affirmative. Profit.

Post has been editedFiliN271 - 07.07.13, 13:35


--------------------
ROM: LineageOS 6.0.1
In lichku not a single question that is answered in the topic.
Spirit of 95
Message#38
07.07.13, 23:03
Novice
***
[offline]

Group: Banned
Messages 34
Check in: 23.12.12

Reputation:-  0  +

For those who can not connect the tablet in firmware mode:
When you press the Home button, before pressing the power button several times, just press ON, hold for 1-2 seconds. and then quickly press 10 times.
FiliN271
Message#39
08.07.13, 12:42
Lonely birds
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2472
Check in: 16.09.08
Motorola Moto E (4th Gen)

Reputation:-  248  +

Spirit of 95,
Rave.


--------------------
ROM: LineageOS 6.0.1
In lichku not a single question that is answered in the topic.
Spirit of 95
Message#40
08.07.13, 23:53
Novice
***
[offline]

Group: Banned
Messages 34
Check in: 23.12.12

Reputation:-  0  +

FiliN271 @ 8.7.2013, 13:42*
Spirit of 95,
Rave.

Perhaps, but it works :-)
Ruslan-79
Message#41
09.07.13, 21:51
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 81
Check in: 04.02.12
Doogee X5 Pro Galicia

Reputation:-  4  +

FiliN271 @ 07/08/2013, 12:42*
Rave.

old man, unfortunately not nonsense, I wrote to you in a personal about this, you apparently missed it, because I do not press anything five times, I sew it with one button

Posted 07/09/2013 21:51:

dark70,
Dear, in order for you to return your plashik and flash any firmware, pick the Windows, namely, remove all the wood. then connect and you will have happiness =), I have already asked for it and faced such a problem
teXet
 

25 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 20.05.19, 03:20