RoverPad 3WT74L & RoverPad 3WT74L (GF) - Firmware



Rep: (269)
RoverPad 3WT74L & RoverPad 3WT74L (GF) - Firmware
Picture
Description | Discussions | Firmware

Drivers and Utilities
ADB drivers for Windows
Live suite
I need your help with filling.

Firmware

Instructions
The program for calibrating the sensor.
Another way to calibrate the sensor.
Firmware via Live Suite
1. Turn off the device;
2. Run the program for firmware Live suite and select the firmware file;
3. Connect the USB cable to the tablet (but not to the computer!);
4. Clamp and hold on the tablet button "volume up";
5. Without releasing the button, connect the USB cable to the computer;
6. After connecting, without releasing the "volume up" button, quickly press the power button (5-10 times.);
7. If the Live suite, then in the windows that appear, select the firmware version (full format - click Yes both times)
8. The firmware will start.
9. Wait until the process is over; in no case should the USB cable be disconnected before time !!!

Root

Frequently asked Questions.
How are official firmware better than mine from the store?
Answer.
I can’t install the ADB driver, how to fix it?
Answer.
How to boot into recovery?
Will be filled as questions arise.


Post has been editedSadowplay - 28.07.16, 17:59



Rep: (5)
LiveSuit catch! unpack and further instructions on how to

Attached files

Attached fileLiveSuitPack105_english_1352960642.exe(3.72 MB)



Rep: (5)
admin download and mount a cap in if you can! I have a limit of 128 MB!
http://yadi.sk/d/-V4r8TeC63adUfirmware 4.0.4 (by Texet T7026 for seriynika RPM740) everything works quickly and Roverskoy 4.0.3
http://yadi.sk/d/m1k1vlIx63anAfirmware 4.1.1 fully working (RPM740)
http://yadi.sk/d/KDr2kV-x63atufirmware 4.1.1 not working chamber and rotated by 90 degrees aksilerometr (RPM740)
http://yadi.sk/d/syeIQSZy63ayofirmware 4.2.2 fully working and nimble (RPM740)
I repeat all firmwares I tried to 3wt74l RPM740 and I could confuse the description in firmware 4.1.1 forgive

Posted 06/22/2013, 8:43:

drivers who do not have the Windows

Attached files

Attached fileDrivers_AllwinnerA10_32and64.zip(3.76 MB)



Rep: (269)
Ukata @ 22.6.2013, 11:30*
LiveSuit catch! unpack and further instructions on how to

What razpakovyvat then? In the same exe format



Rep: (140)
eihman5 @ 22.06.2013, 10:31*
razpakovyvat that something? In the same exe format
This self-extracting archive. Just what is the point spread it here, if it is on the FTP Rover'a -ftp://ftp.rovercomputers.ru/.bios/3WT74LRESP/instr.rarand there is a newer version 1.07 -http://narod.ru/disk/39676580001/LiveSuitPack_v1.07.rar.htmlAnd perhaps it is worth noting in the cap, that in case of problems when downloading from FTP Rover'a (eg blocked ftp protocol provider) must be replaced in the address storokeftp: //at http: //

Post has been editedInfomash - 22.06.13, 18:21



Rep: (5)
guys what's the difference, I just put away to others not to go it!



Rep: (3)
Cool guys, I got this thing the Chinese, do not dare to sew since of.sayta with this model seriynikom RPMDA 3 firmware version and what it can not understand it, can someone tell me Che? Will someone make a thread of the figures on which the firmware? Judging by the gland, they are not so bad just have finished the firmware

Post has been editedalligator45 - 22.06.13, 23:39



Rep: (269)
alligator45,
Look for Digits in the serial number.

Post has been editedeihman5 - 22.06.13, 23:39



Rep: (3)
That's the same place where it's rpmda or himself if he keygen serial that I have it erased



Rep: (140)
alligator45 @ 23.06.2013, 00:43*
if he is the serial number I have it erased
keygen himself needed. The warranty card and on the box it also has to be written.



Rep: (269)
alligator45,
Yes he keygen needed, in your case the only method tyk.
Vprintsepi on these devices neubivaemy flashing mode.



Rep: (3)
The unit is taken from the hands of the docks is nothing left in an unknown serial writes infe

Posted on 06/22/2013, 23:57:

And not the fact that it is better

Posted on 06/23/2013, 00:00:

Well, I set up a little something to robil, but still wanted to was better but the touch is tupit akseler did not calibrated as well as the Media Center and the reader will



Rep: (140)
alligator45 @ 23.06.2013, 01:00*
not the fact that she is better
The fact that the official is the same! There, lined "factory" firmware.



Rep: (1)
I have set the Windows driver yourself Alcatel Android ADB interface ...
Where school ??



Rep: (140)
mccm @ 25.06.2013, 14:50*
I have set the Windows driver yourself Alcatel Android ADB interface ...
Where school ??
The fact that you have not complied with most first item of firmware instructions ...
Turn off the device
He you explicitly included.



Rep: (1)
Infomash @ 25/06/2013, 18:24*
The fact that you have not complied with most first item of firmware instructions ...
Quote
Turn off devaysOn you explicitly included.

turned
I put all the wood which found in the folder with the program and a separate driver pack nothing helped

by raytkliku (for wines 7 - my computer - right click - Management- Device Manager - usb controllers - an unknown device - right click - Properties - Details tab - a drop-down list of line "hardware ID") defined as the divaysUSB \ VID_1F3A & PID_EFE8 & REV_02; 3.
look hereLY-F1 - Discussion (Post # 11194816)
I had to download
http://www.mediafire.com/download/ey0zfn10.../F1-Phoenix.rar
folder found in the wood on your device
further LIVE SUIT caught



Rep: (140)
mccm @ 25.06.2013, 21:04*
divays detected as USB \ VID_1F3A & PID_EFE8 & REV_02; 3
That's right, but judging by the fact that the driver you do not automatically install - you have a 64-bit OS. Driver goes for it separately (in the attachment). Probably it is necessary to add in a cap with the comment that this is the firmware for a 64-bit OS.

PS:
Ukata @ 22.06.2013, 09:43*
drivers who do not have the Windows
Only now see what it turns out to be the drivers for the ADB, and not for firmware ... I guess in the comments in the header should write that it is "ADB-drivers for Windows". Although they probably place in the topic "Discussion", there is truth behind it, no one watches ..

Attached files

Attached fileAllWinner_x64.zip(554.44 KB)


Post has been editedInfomash - 25.06.13, 20:31



Rep: (5)
yes I'm sorry I put ADB driver! perepravte cap please



Rep: (0)
Guys, I have a question, and if I have the serial number starts with RPRSTA7Qxx if I can put an unofficial firmware 4.2.2?



Rep: (140)
DuMaHVRN @ 26.06.2013, 14:29*
if I have a serial number begins with RPRSTA7Qxx if I can put an unofficial firmware 4.2.2?
Can, but 100% something will not work. options:
1) touch screen mirror or does not work
2) the image on the screen is shifted
3) G-Sensor does not work
4) Wi-Fi does not work
5) simply will not boot
well, or all together. There are ways to eliminate the first two issues in some cases. 3 and 4 also probably can substitute for the appropriate drivers, but not the fact that drivers from 4.0.4 to 4.2.2 will work. If it is not loaded, too, surely something can be done, but there is a bit more complicated to understand ...



Rep: (0)
Infomash Thank you, I will not risk it)


Full version    

Help     rules

Time is now: 02/05/20 03:00