Assistant
REPLY |
TP-Link TL-WR841 - Discussion | [wifirouter] Discussion, firmware, problem solving |
Message#1 04.12.14, 10:30 | |
Guru [offline] Group: Moderators Messages 14719 Check in: 04.05.09 Apple iPhone 7 Reputation: 1716 | TP-Link TL-WR841N- Discussion The forum decided to post images under the spoiler A photo: Description: The TL-WR841N wireless router is a combined wired / wireless network device designed for use in small and home offices. Using the 2T2R MIMO technology, the TL-WR841N allows you to create a network with ultra-high data transfer rates, making it possible to view HD video online, use IP telephony and play online without delays or disconnections. The device is made in a stylish case and is equipped with a WPS button for quick installation of WPA2 protection. Specifications: Offsite specifications Hardware Interface 4 10/100 Mbit / s LAN port 1 10/100 Mbps WAN port Buttons Quick Protection Setting Button (QSS) Reset button External power supply 9V DC. current / 0,6A Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Antenna 5dbi * 2 fixed omnidirectional antennas Dimensions (WxLxH) 192 x 130 x 33 mm Parameters of the wireless module The frequency range of 2.4-2.4835 GHz 11n signaling speed: up to 300 Mbps (dynamic) 11g: up to 54 Mbps (dynamic) 11b: up to 11 Mbps (dynamic) EIRP (Wireless Power)<20dBm (EIRP) Sensitivity (reception) 270M: -68 dBm with 10% PER 130M: -68 dBm with 10% PER 108M: -68 dBm with 10% PER 54M: -68 dBm with 10% PER 11M: -85 dBm at 8% PER 6M: -88 dBm with 10% PER 1M: -90 dBm at 8% PER Wireless functions Enable / Disable broadcast, WDS bridge, WMM, Statistics Wireless network protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK Wireless network 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK Software features WAN connection type Dynamic IP / Static IP / PPPoE / PPTP / L2TP / BigPond DHCP Server, Client, List of DHCP clients, Address Reservation QoS (traffic prioritization) WMM, Bandwidth Control Port Forwarding Virtual Server, Port Launch, UPnP, DMZ Dynamic DNS DynDns, Comexe, NO-IP VPN traffic pass PPTP, L2TP, IPSec (ESP Head) Access control Parental control, local control, list of nodes, access schedule, rule management Network security (firewall) DoS, SPI firewall Filtering by IP Addresses / Filtering by MAC Addresses / Domain Filter Binding IP and MAC addresses Management Access Control Office in place Remote control Other CE, FCC, RoHS certification Scope of Delivery Wireless Router TL-WR841N External power supply CD with materials Quick Installation Guide System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista ™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux Environmental Parameters Operating Temperature: 0 ℃ ~ 40 Storage temperature: -40 ℃ ~ 70 ℃ Humidity (operating mode): 10% ~ 90% non-condensing Humidity (during storage): 5% ~ 90% non-condensing Firmware
Useful links: dump v13 dump v11 LEDE dump v11 dump v10 dump v9 dump v8 dump v7.2 Simulators TP-LINK Transition to official firmware for TP-LINK routers with DD-WRT Recovery TL-WR841N (D) -V9 Repair TP-Link routers via serial interface DD-WRT FIRMWARE CHANGELOG Recovery via UART TL-WR841ND rev8.1 Build OpenWrt from source codes Connect OpenWrt / LEDE as a wifi client DD-Wrt connection as a wifi client Instructions for configuring OpenVPN + zaborona.help on LEDE firmware How to configure the repeater / client mode on the stock (factory) firmware Reassigning a burned-down port to a LEDE / OpenWrt video on YouTube WR841N v8 pinout usb port Port forwarding, opening / closing ports Return to manufacturer software The curator of the topic isA.r.c.h.e.r. Post has been editedA.r.c.h.e.r. - 09.04.19, 21:12 Reason for editing: Openwrt 18.06.2 for Tp-Link 841v8 |
Message#2 20.06.13, 11:16 | |
a guest [offline] Group: Users Messages 7 Check in: 20.06.13 Reputation: 2 | Router (router) TL-WR841N TP-LINKis a device capable of transmitting wireless network data at speeds up to 300 Mbps. This router is great for small offices, as well as for creating a wired and wireless Internet connection at home. The router (router) is distinguished by a rather simple setup, which is conventionally fashionable to be divided into several stages. The first involves connecting the TL-WR841N TP-LINK to a computer. To do this, you need to turn on the router to the network, then connect the Internet cable to the WAN port and the cable that comes with the router (router) to the LAN port; connect the other end of this cable to your computer. After that, you need to configure the local network. To do this in Windows XP, go to the properties of "Internet Protocol Version 4," you must select "Obtain an IP address automatically" and "Obtain the DNS server address automatically." To activate these parameters, you must go to the Network Connections folder, then select the Local Area Connection properties with the right mouse button and open the Internet Protocol. These same parameters, i.e. “Obtain an IP address automatically” and “Obtain DNS server address automatically”, you need to install in Windows Vista and Windows 7 (if you use one of the OS data). Only in the first case, you need to go to the Network and Sharing Center, then to Manage Network Connections, where you need to select Local Area Connection, then Properties. In Windows 7, in the “Network and Sharing Center” folder, you need to select “Change adapter settings”, then “Local Area Connection”, then proceed as described above. After configuring the local network, you need to open a browser and enter the IP address of your router in the address barhttp://192.168.0.1, press "Enter" and pass authentication. To do this, in the “Username” and “Password” lines, you need to enter “admin”, since “admin” by default is both the name and password to access the settings of the router (router) TL-WR841N TP-LINK. The next configuration step is the router firmware (router). To do this, open the tab called "System Tools" and select the line "Firmware Upgrade". You will see that you need to attach a file containing the firmware. In the event that you do not have such a file, you will have to download it from the tp-link website. After downloading the file, the firmware process will complete, the router will reboot. Next, open "Network", select "WAN" and configure the type of connection you need in the field called "WAN Connection Type". After entering all the necessary information, press the "Save" button. If you need to fill in the line "MAC Clone", then you need to select "Clone MAC Address", then you also need to save the settings. Setting up a wireless network is much faster. First you need to select the tab “Wireless”, then “Wireless Settings”, enter the name of your network there so that it can be easily found, if you wish, you can specify your region. After that, open the “Wireless Security” tab, where you enter the security key, select “WPA-PSK / WPA2-PSK”, then “Encryption”, where you set a parameter called “TKIP”, in the “PSK Password” field, enter the password which will protect your network from unauthorized access. Post has been editedstp101 - 14.01.19, 01:33 Reason for editing: Spoilers |
Message#3 20.10.13, 23:54 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2437 Check in: 06.03.10 Meizu M6 Note 3/16/32 Reputation: 288 | Installed windows 8.1, put firewood on the wafer from the developer's site, connects the wafer but writes "connection is limited." Tell me what could be the case, how to deal with it, thanks for earlier. -------------------- Meizu M6 Note |
Message#4 22.10.13, 12:33 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1908 Check in: 05.02.10 Reputation: 102 | Rolled on the OpenWrt router and raised the guest wifi plus to its grid. Clipped the channel to the guests and locked up the torrent. It lacks only usb and so sweetie right -------------------- Lenovo Tab 4 TB-X304L 32GB 3G *** PS4Pro *** PS4Slim *** PSVITA Fat *** Nintendo Switch |
Message#5 07.11.13, 06:16 | |
Novice [offline] Group: Active users Messages 43 Check in: 07.11.13 Samsung Galaxy S3 GT-I9300 Reputation: 0 | I have a cable Internet browser. TP-LINK TL-WR841N router and desktop switch TL-SF1005D. Installed the router connected the cord, everything works fine. Now I pull out the cable on the computer on the computer then it’s impossible to connect to the network. On the other router, only the one who connects first works on the computer. I connect the computer does not distribute the router. When I connect the router first, the computer does not connect because of what it is. From the switch, neither from the router could it do so that the computer was connected and the router handed out help please s Thanks previously. (and the switch and router serviceable) -------------------- uzbagysya |
Message#6 07.11.13, 09:29 | |
PSx Maniac [online] Group: Moderators Messages 14929 Check in: 02.07.06 Reputation: 1328 | CSKA-SILA, cable that connect the computer to the router / switch, what? homemade or shop? -------------------- PSP Slim & Lite 2001 PS3 Slim 320GbCustom fw PS3 SuperSlim 500GbOfficial fw |
Message#7 07.11.13, 16:38 | |
Novice [offline] Group: Active users Messages 43 Check in: 07.11.13 Samsung Galaxy S3 GT-I9300 Reputation: 0 | Store)) all cables are factory-installed in packings, through one any Internet cable works when the second connects then the one that connects the second one does not work (( Post has been editedCSKA-SILA - 07.11.13, 16:40 -------------------- uzbagysya |
Message#8 07.11.13, 17:43 | |
Novice [offline] Group: Active users Messages 43 Check in: 07.11.13 Samsung Galaxy S3 GT-I9300 Reputation: 0 | Here are the messages that are displayed when I try to connect from the router with a cable to the Internet on my computer Post has been editedstp101 - 25.02.17, 15:32 Reason for editing: Spoiler -------------------- uzbagysya |
Message#9 07.11.13, 21:29 | |
a guest [offline] Group: Users Messages 9 Check in: 30.09.11 Reputation: 0 | |
Message#10 08.11.13, 05:20 | |
PSx Maniac [online] Group: Moderators Messages 14929 Check in: 02.07.06 Reputation: 1328 | CSKA-SILA, Why do you need a PPPoE computer? you now have a router responsible for this ... -------------------- PSP Slim & Lite 2001 PS3 Slim 320GbCustom fw PS3 SuperSlim 500GbOfficial fw |
Message#11 08.11.13, 15:29 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1409 Check in: 22.04.13 Reputation: 5 | Guys want to buy this thing only at the end of the ND, for a smartphone. A network of 100 megabits, in real life how much will it show on this device? And will it in the future pull smart TV and watch movies on TV? Thank. -------------------- Xiaomi Redmi Note 3 Pro 3/32 H96Pro 3/32 Xiaomi router 3G I5 2500K (4500), MSI P67A-GD53 (B3), 12GB (1800), GTX1050Ti, 1SSD, 3HDD |
Message#12 15.11.13, 21:02 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1039 Check in: 25.06.11 Sony Xperia Tablet Z2 Reputation: 105 | Guys want to buy this thing only at the end of the ND, for a smartphone. A network of 100 megabits, in real life how much will it show on this device? And will it in the future pull smart TV and watch movies on TV? Of course it will pull - why not pull it? Blurs seem to be like a standard, the maximum bitrate is 48 megabits per second, the router has a wired network of 100, WiFi 300 .. in real minus ~ 15-20% http://www.youtube.com/watch?v=7uCAHg7Okzwsmall review and setup manual |
Message#13 17.11.13, 20:21 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1409 Check in: 22.04.13 Reputation: 5 | TP-LINK TL-WR841ND router cuts speed I bought myself a present. My tariff is from 70-100 megabits. Praider matrix. No modems, direct connection to the network card. It seems to be all set up. I called the technical support of the provider, registered a mac router. I go, check the speedtest. And what I see, the speed as always jumps to 85-95 megabits and almost immediately goes down. As a result, a measly 25 megabits. Almost 4 times, ochumemet (( Photo attached I tested the waffle on the phone. To me no more than 19, from me 26. Still with such speed ( What to do? To sew? search for wrong settings, restrictions. Can the way of protection cut the speed? I have to WPA-PSK / WPA2-PSK Post has been editedGloomy - 13.05.14, 13:58 Reason for editing: spoiler -------------------- Xiaomi Redmi Note 3 Pro 3/32 H96Pro 3/32 Xiaomi router 3G I5 2500K (4500), MSI P67A-GD53 (B3), 12GB (1800), GTX1050Ti, 1SSD, 3HDD |
Message#14 18.11.13, 10:08 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 507 Check in: 14.05.12 Reputation: 12 | |
Message#15 18.11.13, 10:56 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1409 Check in: 22.04.13 Reputation: 5 | sv0l04 my provider cut speed from 7-2 nights. Just such a tariff) Everything else is 100 megabytes. At 2 nights the speed on a smart from 50-85. The speed on the computer is as it was for 90 megabits. -------------------- Xiaomi Redmi Note 3 Pro 3/32 H96Pro 3/32 Xiaomi router 3G I5 2500K (4500), MSI P67A-GD53 (B3), 12GB (1800), GTX1050Ti, 1SSD, 3HDD |
Message#16 18.11.13, 11:05 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 507 Check in: 14.05.12 Reputation: 12 | JaguarRUS I found something, but I have not tried it yet, I don’t have it at hand now ..... try thishttp://www.tp-link.ua/article/?faqid=194if help will accomplish your goal, I'll try when I can too .... -------------------- |
Message#17 19.11.13, 09:33 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 507 Check in: 14.05.12 Reputation: 12 | |
Message#18 19.11.13, 10:12 | |
PSx Maniac [online] Group: Moderators Messages 14929 Check in: 02.07.06 Reputation: 1328 | [email protected], 13:33 via Wi-fi no more than 20 MB. 1. write correctly ... 20 megabytes (this is 160mbits so) or 20 megabytes .... 2. Understand the firewood of the company ... I was also puzzled by the beech, as it sees the n-network, and connects only to the g-network (in the router's logs) ... and if the router is forced to put "n only" then the beech is not connects ... although the phone without the declared support for the n-network quietly connected to the n-network at the appropriate speed ... -------------------- PSP Slim & Lite 2001 PS3 Slim 320GbCustom fw PS3 SuperSlim 500GbOfficial fw |
Message#19 19.11.13, 12:24 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 507 Check in: 14.05.12 Reputation: 12 | [email protected], 11:12 2. Understand the firewood of the company ... I was also puzzled by the beech, as it sees the n-network, and connects only to the g-network (in the router's logs) ... and if the router is forced to put "n only" then the beech is not at all connects The same garbage, but thanks for the advice ..... I will pick firewood ... -------------------- |
Message#20 19.11.13, 12:41 | |
PSx Maniac [online] Group: Moderators Messages 14929 Check in: 02.07.06 Reputation: 1328 | [email protected], 16:24 The same garbage, but thanks for the advice ..... I will pick firewood ... I heard that the Intel's firewood is to blame ... the firewood from the small and light ones is working properly ... -------------------- PSP Slim & Lite 2001 PS3 Slim 320GbCustom fw PS3 SuperSlim 500GbOfficial fw |
Message#21 19.11.13, 17:18 | |
Veteran [online] Group: Friendssavagemessiahzine.com Messages 1409 Check in: 22.04.13 Reputation: 5 | Everything works. By speed on the phone from 35-80. On a computer from 90. In order not to flog a fever test speed without a router. Then with the router. Speedtest and other help. If the speed on the computer itself with the router is the same as without it, then the floor of the case can be considered. -------------------- Xiaomi Redmi Note 3 Pro 3/32 H96Pro 3/32 Xiaomi router 3G I5 2500K (4500), MSI P67A-GD53 (B3), 12GB (1800), GTX1050Ti, 1SSD, 3HDD |
mobile version | Now: 04/18/19, 23:47 |