[X]Assistant

[maratkeee]

Description | Discussion " | Firmware "

Characteristics of the device

System:
Android operating system
Support Android 4.1 / 4.2
Processor / Chipset-RockChip RK3066 1500 MHz
The number of cores-2
RAM 1 GB DDR3
8 GB internal memory
Support for microSDHC memory cards, up to 32 GB
Screen:
Screen-9.7 ", 1024x768
Screen type - TFT IPS, glossy
Capacitive touch screen, multitouch
Video Processor-Mali-400 MP4
Wireless connection
Wi-Fi support, Wi-Fi 802.11n
Bluetooth support, Bluetooth 4.0
Mobile communications-3G, HSDPA
Camera:
The rear camera is, 2 million pixels.
The front camera is, 0.3 million pixels.
Sound:
Built-in speaker is
Built-in microphone is
Functionality:
Automatic screen orientation is
Accelerometer sensors
Format support:
Audio-AAC, WMA, WAV, OGG, FLAC, MP3
Video-MKV, H.264, MOV, MP4
Connection:
USB connection to computer
Connecting external devices via USB is
Connecting to a TV / mini-HDMI monitor
Audio / headphone output is, 3.5 mm
Nutrition:
6 hours work time
Battery capacity 7200 mAh
Dimensions and weight:
Dimensions (LxWxD) 246x190x9 mm
Weight 603 g
Additional Information
Body material metal
Components-tablet, USB-cable, OTG-cable, headphones, case, network adapter, manual
Features-support for PDF, FB2, EPUB, HTML, TXT, RTF, DOC; JPG, BMP, PNG, GIF; AMR, M4A, M4R, MP2; FLV, AVI, XVID, RMVB, MPG

Here you can communicate, ask questions. In general, everything about this tablet: yes2:

Utility

Updated installation instructions for CWMRecovery and Root on tablets with Android 4.2.2

Updated installation instructions for CWMRecovery and Root on tablets with Android 4.2.2

Firmware 4.2.2

Update 4/4/13 (4.2.2)

CWMRecovery and Root on a tablet with Android 4.2.2

How to install CWMRecovery and Root on a tablet with Android 4.2.2?
Turn on "USB debugging", turn off the tablet.
(Firewood should already be installed)
SwingingRK30GENERIC_CWM.zip(2.69 MB)
and unpack.
SwingingRKDevelopTool_v1.35.zip(273.18 KB)
unpacking side by side.
We clamp the "triangle" on the tablet and connect USB.
Run RKDevelopTool (the one that was unpacked), in step 6, select the recovery downloaded earlier (recovery.img), remove the other checkboxes.
Click the Run button. 2.3 seconds and you're done!
SwingingSuperSU.zip(958.92 KB)
We put it in the root of the memory card and install it through CWMRecovery.

A way to improve the 3G module

How to improve the level of 3G reception on the tablet TM-9748 3G?
Register these lines in the build.prop file:

3G tweaks
ro.ril.hsxpa = 2
ro.ril.gprsclass = 10
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
ro.ril.hsupa.category = 5

There is no "For Developers" button, what should I do?

In the settings there is no item "For developers", can I turn it on?
Can. To do this, you need to repeatedly click the "Build number" in the "About Tablet PC". The tablet will write "Congratulations, you have become a developer!".

Increase sound volume

-Is it possible to somehow increase the sound volume of the tablet?
Can. Use for this programVolume +.

Post has been editedmaratkeee - 10.10.13, 06:46

Reason for editing: Updated topic ...

[Shummy2007]

[email protected], 15:50

Here you are the boys and girls instructions for installing CWM Recovery on our device ....., we runRKDevelopTool_v1.35(from the cap), ...

I can not even find in the cap, throw the link pliz

[xandrey73]

I can not even find in the cap, throw the link pliz

In the firmware section (drivers and utilities)

[Shummy2007]

xandrey73 @ 07.27.2013, 20:59

In the firmware section (drivers and utilities)

Thanks: rolleyes:
I tormented myself with the XR button, but in the end I did not need the Hard Reset button
Downloaded from Caps
1 -(texet) RK30 v1.5: Utility for changing software, Windows USB driver [32-bit: 2000, vista, win7, xp] [64-bit: vista, win7]
and
2- RK30GENERIC_CWM.zip from the header, unpacked everything into one folder
Well, then in RKDevelopTool_v1.35 filled out the items 3- (misc-boot-recovery.img) and 6- (recovery.img) - the rest removed the ticks
clicked Switch tablet went out
-an unknown device appeared, put firewood from archive number 1
and in RKDevelopTool_v1.35 clicked Run.
Literally 5 seconds and ready: yes2:

Attached files

RKDevelopTool_v1.35.rar(353.23 KB)


Post has been editedShummy2007 - 26.07.13, 18:40

[uwerto]

Who can tell, I turn on the tablet, the picture is loaded, and the TEXET inscription hangs on, nothing happens, it just hangs and that's it. I tried to enter the engineering menu does not work.

[Nemo0]

uwerto,
Well, if you can not go into the engineering menu (although it should), then only a flashinghere on this instruction.

[reivenhold]

good evening
Tell me how to get root on this device?
tried everything, no way helps

[Nemo0]

reivenhold,
Have you tried these 3 ways?

1. Downloadprogram archiveand unpack it.
2. On the tablet, turn on USB debugging mode (Settings \ For Developers).
3. Connect the tablet to the computer.
4. Run the file SuperOneClick.exe, in the window that opens, click the Root button and wait.
All questions are answered in the affirmative. The program should install the ADB driver itself if there are none.

Secondway from userDrivest: 1. We set up debugging in the tablet (Settings>For developers>In the upper left corner, click on off so that it lights up in blue>Click on "Laying by USB" Done. 2. We connect the tablet to the computer via USB (You do not need to turn on the USB drive) 3. Start SuperOneClick. 4. Select the Advanced tab (as shown in the screenshot), tick the "Use Alternate ADB Parser" checkbox and click Check Drivers 3 times. 5. Click on the General Root tab if the program hangs in step "5 Step" Turn off the program. 6. Run the program go to the tab Advansed remove the tick in the "Use Alternate ADB Parser" go to the General click Root, click on the questions Yes. 7. If the SuperSU application appears in the menu on the tablet, then you have received the root. Congratulations!

If for some reason these methods do not work for you, you can trythird way.

[maratkeee]

Who has this device and root on it, who downloaded the screencast, after recording, do you have a normal sound? For some reason, I have a curve.

Post has been editedmaratkeee - 11.08.13, 12:09

[dark4venom]

Nemo0,
thank you, kind man, could not find a suitable way to root, but here the third way helped;)

[xandrey73]

At the moment, an update is being developed for our device, it is going through the last stage of testing.

The campaign will have to wait long

[dark4venom]

xandrey73,hope dies last.

[SashaPeski]

The guys own this miracle, but then I noticed one problem when watching videos in the browser on sites like (filmix.net - (not ads) or the like), so the video loads up to 8.3 MB and no longer wants. And in programs like VideoMix it loads the video completely ... Can anyone come across such a problem?

Post has been editedSashaPeski - 23.08.13, 18:15

[Nemo0]

SashaPeski,
Try another browser.

[SashaPeski]

[email protected], 09:30

SashaPeski,
Try another browser.

I tried google, opera, dolphin and standard in all this maza = (

[Nemo0]

SashaPeski,
Give a link to this video, check it out for yourself.

[SashaPeski]

Nemo0,I dropped the link in the LAN.

[udj_]

In general, the story is. They brought this body locked with a graphic key.
I could not get into the engineering menu, both methods do not roll.
with a clamped triangle, he generally refused to turn on without giving any signs of life.
It just turns on from the button, and if the cable is plugged into it, it also turns on.
in the device manager, when simply turned on, it appears as 2 texet usb device
If you start with the menu button pressed and poking into the reset, it is seen in the manager as an RK30 Device
and that I just did not try ... but I really could not flash
RK30_V1.5 never blinked a square, and I put firewood from the official site (from both the texch and the rockchip). general silence
but having thrown it onto the tablet's flash drive, I request it from the Teksetovsky officer (TM-97483GFW_03142) with the name update.img; I saw the body and asked if it was necessary to sew or not,
and after self-rewriting and rebooting again asked the pattern.
I tried to rename RK30GENERIC_CWM.zip to update.zip and throw on the flash, the body sees it but refuses to put it. In general, the guys ask for good advice
what do I do with this miracle tablet ... 4 hours killed and the result is zero ...
Comp smart, OS vin7h64
thank you in advance

Post has been editedudj_ - 25.08.13, 23:10

[Nemo0]

udj_,
Try on Win XP. On Win 7 for some reason, many have problems with drivers.
And to enter the engineering menu, at the stage of pressing the Power button (instead of pressing it), try connecting to your computer via USB.

Post has been editedNemo0 - 26.08.13, 03:29

[SashaPeski]

Guys such a problem, when you try to get root-rights in the first and second method, this problem arises, can anyone know where to get this file?

The third method also does not work.

[Nemo0]

SashaPeski,
Well, it can not be that all 3 methods do not work. Look for a problem in your system.