Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
HTC One Dual Sim - Firmware |
Message#1 13.06.13, 21:34 | |
Always happy to help [offline] Group: Curators Messages 4108 Check in: 20.01.11 Apple iPhone Xs Reputation: 481 | HTC One Dual Sim - Firmware HTC One Dual Sim 802w, 802d, 802t Description | Purchase | Accessories | Discussion � | Firmware HTC One Dual Sim MaximusHD � | Sixth Sense Revolution Firmware � | Firmware � Important information! ������� ���, ��� �� �������, �� ������� �� ���� ����� � ����! download����� ��� ��� ������ ������ ������� ����, ����� �(���) ����������� �����! ����� ����������� ������������ ������ �������� HTC One firmware for our deviceUNSUITABLE!!! The previous topic header is here:Topic Cap Basic concepts of what and for what is used in HTC smartphones with Android OS (for general reference). Before you start flashing the phone. Carefully read before returning S-ON. The phone can not be connected as a USB flash drive. Why do you need S-Off. Free S-OFF can be done only if you have HBOOT 2.27 or lower. If HBOOT is higher - only charge The first steps for flashing Do not be lazy to read. 1. First of all, you need to determine what kind of device you have. . There are 3 types of HTC One Dual Sim series devices: - HTC One 802w (Apparatus for China), HTC One Dual Sim (Apparatus for CIS countries). For iron, these two devices are identical. Therefore, all modifications and custom firmwares are suitable both for Chinese devices of this series, and for PCT devices. - HTC One 802d (Apparatus for China). - HTC One 802t (Apparatus for China). I will not describe the difference between the three types of devices, this information is sufficient in the discussion topic and indeed in the Internet. So the surest way to determine the type of apparatus - on the packaging. On the box on the side and bottom there are stickers where the stamp of the device is written. If the device got to you without a box, or there is no marking, or you are not sure which type of device got to you, then reboot the phone into bootloader mode (see spoiler - (INSTRUCTIONS / RECOVERY - all Dual Sim models) =>(Instructions) =>(How to open the bootloader and fastboot) and look at the top lines on the phone screen: - If there is an inscription M7CDug - then you have the device HTC One 802 w (HTC One Dual Sim); - If there is an inscription M7CDwg - then you have the device HTC One 802 d ; - If there is an inscription M7CDTU - then you have the device HTC One 802 t . 2. Determination of the firmware installed on the device (official or custom). If you purchased the device officially in the “white” store or from the NTS dealer, then you most likely have the official firmware (although this is not a fact, but in most cases it is the official firmware). In this case, you will receive all official updates, fixes, etc. If you purchased a phone in a gray or online store, then with a 50x50 probability you may have an unofficial (so-called custom) firmware. Determining which firmware is installed is sometimes very difficult. Gray phone sellers are doing everything possible to hide the traces of installing third-party firmware. The official (also such a pun) firmware may also be unofficial, but for a device from another region, for example, a backup of the official Russian firmware is supplied to the Chinese device, etc. If the seller is not very advanced and is not very messy, you can determine whether third-party firmware was installed using the following features: - In the phone settings there is no item "Software Update"; - In the settings - About the phone - Software version - The software number is the name of the Romodel (many romodels like to write there) for example on the Maximus HD firmware; - When the phone is rebooted in bootloader mode, *** RELOSCED *** is written on the screen (this means that your phone was unlocked to install third-party firmware, and then blocked again). - Etc. etc. In principle, this information is not so important if you purchased a gray device with no warranty and no obligations, and if you are officially and with a guarantee, be careful. This item does not claim to be 100% guaranteed to determine what firmware you have, because gray phone sellers use various tricks to hide the fact that the phone has been re-flashed. This post is most likely informative, maybe it will help you. 3. Types of firmware. There are 4 types of firmware: 3.1. Official firmware from the manufacturer. The so-called RUU file. This firmware can be in two versions as a .exe file and as a .zip file. The firmware in the form of RUU.exe files is sewn without any shamanism. The phone connects to the computer (do not forget to turn on debugging via the USB), you don’t need to translate the device into any mode. Run ekzeshnik and follow the instructions on the screen of the computer. Firmware in the form of .zip files have the following form - PN07IMG_M7C_DUG_JB_50_S1_HTCCN_CHS_CU_2.17.1402.2_ Radio_1237.20.28.0614_release_324897_signed_2_4.zip (where DUG is the device type. See item 1 of this post). Such firmware is sewn right on the device. The firmware process is as follows: - download the firmware and rename it toPN07IMG.zip ; - MANDATORY Put stock recovery and block the bootloader; - throw filePN07IMG.zip in the root of the card (or internal memory is unimportant) and overload the phone; - the phone starts to flash, the firmware time may take 15-20 minutes; - after the first launchMANDATORY delete the file PN07IMG.zip (otherwise, after each reboot, your phone will be flashed again). 3.2. Custom firmware in the form of a .zip file from romodels. Such firmware can be called as you like (as wanted romodel). This type of firmware is sewn through custom recovery CWM or TWRP. 3.3. Nandroid backup, which in turn is divided into two types - Backup for CWM Recovery and TWRP Recovery (depending on which custom recovery you have installed). Such firmwares are sewn, or rather they are not even sewn, and are restored on the phone through the custom recovery menu. These firmware are made this way - any person (not necessarily a homemade designer) installs a firmware for himself, makes changes, modifications, decorations, etc. and then it makes a nandroid backup using recovery and puts the resulting backup onto the forum. Anyone who wants to download it, uploads it to the memory card (or internal memory) of the phone, and through the custom recovery menu restores it to his phone. 3.4. OTA firmware. Rather, it is not even the firmware but the update of the official firmware from the manufacturer. If such an update is available then a message about the availability of new software will pop up on your official firmware when connecting to the Internet. Then follow the instructions you can upgrade your firmware. There are also OTA updates for custom firmware from romodels. The principle of receiving and updating such an update is similar to obtaining an official update. 3.5. ATTENTION. As a rule, new OTA updates put a higher hboot (bootloader) that does not allow to lower the firmware (well, many people don’t like it) without having s-off. Therefore, if you want to lower the firmware version (install an earlier one), you need to get an s-off on the device. 4. What you need to do to flash unofficial firmware. 4.1. Unlock bootloader (required). 4.2. Carry out the procedures-off (optional but desirable). 4.3. Install custom recoveryCWM or TWRP (required) 4.4. Download the custom firmware you like (for your device). 4.5. Make a nandroid backup of your existing firmware and copy it to your computer (required). All procedures for clauses 4.1., 4.2., 4.3. look under the corresponding spoilers in this post. 5. The process of installing custom firmware. - Copy the firmware to any place on the internal memory or on the SD card. - Reboot the device into the mode of custom recovery (CWM or TWRP). - Make wipes (Optional in some cases. Romodels are usually written about the need for wipes in the descriptions of their firmware). The wipe process is described in the first post of this topic. - Mount the internal memory and the memory card (in the CWM and TWRP find the mount item there everything is intuitive). - In CWM recovery, select the install zip item, if the firmware is in the internal memory, then choose the path where you have the firmware, and if the firmware is on the memory card, then select istall external card and then the path where the firmware is on the memory card). - In TWRP recovery, select the install item and continue to choose the path where the firmware is located. - Wait until the installation is completed and reboot the phone (the first launch can take a very long time on some firmware). 6. The process of firmware through CWM >>link<< 7. The process of flashing through TWRP >>link<< Drivers and Utilities Utilities fastboot_adb: Android.rar (491.87 KB) HTCDriver_4.10.0.001: HTCDriver_4.10.0.001.rar (15.95 MB) And how to be on Win 8.1, if the PC does not see the device. Current firmware BEKAPY OFFICIAL FIRMWARE 802W CWM backup of the official firmware (Android 4.2.2 based on 2.41) CWM backup of the official Russian firmware (Android 4.4.2) TWRP backup of the official Russian firmware (Android 4.4.3) (Root | No Root) | CWM backup Full BACKUPS ru 802 m7dug (Android 5.0.2) TWRP backup off firmware v.7.17.401.55 (Android 5.0.2) 802D OFFICIAL FIRMWARE 802w 1 HTC_Europe RUU (Android 4.2.2): PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125.exe- 0.97 GB | MIRROR RUU (Android 4.4.3): RUU_M7C_DUG_K443_SENSE60_MR_HTC_Europe_6.13.401.3_Radio_1237.28.35.0516_release_391892_signed.exe- 1,2GB RUU (Android 5.0.2): M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5_Radio_1237.29.35.0903_release_425785_signed- 1.25GB PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5_Radio_1237.29.35.0903_release_425785_signed.zip- 1,2GB PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.55_Radio_1237.29.35.0903_release_462153_combined_signed.zip- 1.25GB |MIRROR MID & CID: modelid: PN0771000 cidnum: HTC__001 cidnum: HTC__A07 cidnum: HTC__A48 1.1 HTC_WWE_VNM RUU (for Android 5.0.2): PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_WWE_VNM_7.17.425.5_Radio_1237.29.35.0903_release_425794_signed.zip- 1,3GB 1.2 HTC_Nordic RUU (Android 5.0.2): PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Nordic_7.17.402.5_Radio_E1237.29.35.0108_release_425799_signed.zip- 1,2GB MID & CID: modelid: PN0771000 cidnum: HTC__Y13 cidnum: HTC__J15 cidnum: HTC__001 cidnum: HTC__032 1.3 HTCCN_CHS_CU OTA updates (for Android 4.4.2 Sense 6.0): FIRMWARE_5.15- 39.9MB MID & CID: modelid: PN0771000 modelid: PN0772000 cidnum: HTCCN703 802d 2. HTCCN_CHS_CT RUU (Android 5.0.2): PN07IMG_M7C_DWG_L50_SENSE60_MR_HTCCN_CHS_CT_7.19.1401.2_Radio_1237.29.35.0903_CNV_CNV_CT_4.22_001_release_426983_signed.zip- 1.4GB MID & CID: modelid: PN0751000 modelid: PN0752000 cidnum: HTCCN702 Warning: Do not flash the Indian model 802D model with Chinese firmware, many users received a brick after installing the Chinese firmware. Therefore, please do not try to flash the Chinese RUU on Indian models. If you still got a brick on your Indian 802D phone, flush the FIRMWARE_M7C_DWG_E.phsh archives at 50_S1_hTC_Asia_India_2.37.720 0.1, and then restore M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720.1.z.a.sh to restore the M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720. x.xx.401.x - World Wide English x.xx.402.x - Nordic, East Europe, UAE (Arabic Keyboard Support) x.xx.500.x - APTG TW (Taiwan) x.xx.707.x - Asia WWE x.xx.720.x - Asia (India) x.xx.1400.x - HTC China x.xx.1401.x - HTC China (China Telecom) x.xx.1402.x - HTC China (China Unicom) x.xx.1403.x - HTC China (China Mobile) 2.1 APTG_TW OTA updates (Android 4.4.2 SENSE 5.5): OTA_M7C_DWG_K44_SENSE55_MR_APTG_TW_4.25.500.2-2.42.500.1--Mirror OTA updates (Android 4.4.2 SENSE 6.0): OTA_M7C_DWG_K44_SENSE60_MR_APTG_TW_5.18.500.4-4.25.500.2--Mirror RUU (Android 5.0.2): PN07IMG_M7C_DWG_L50_SENSE60_MR_APTG_TW_7.17.500.9_Radio_1237.29.35.0903_CNV_CNV_APTG_4.23_006_release_430581_signed.zip- 1.3GB Firmware (for Android 5.0.2): FIRMWARE_M7C_DWG_L50_SENSE60_MR_hTC_Asia_India_7.17.720.6 _..._ release_426120.zip MID & CID: modelid: PN0751000 cidnum: HTC__621 2.2 hTC_Asia_India RUU (Android 5.0): PN07IMG_M7C_DWG_L50_SENSE60_MR_hTC_Asia_India_7.17 .720.6_Radio_1237.29.35.0903 release_426120_signed.zip- 1.3GB OTA updates (for Android 5.0): OTA_M7C_DWG_L50_SENSE60_MR_hTC_Asia_India_7.17.720.15-7.17.720.6_release_446194- 65.7MB RUU (Android 5.0.2): PN07IMG_M7C_DWG_L50_SENSE60_MR_hTC_Asia_India_7.17.720.6_Radio_1237.29.35.0903_CNV_CNV_India_4.21_09B_release_426120_signed.zip- 1.3GB Firmware (for Android 5.0.2): FIRMWARE_M7C_DWG_L50_SENSE60_MR_hTC_Asia_India_7.17.720.6 _..._ release_426120.zip MID & CID: modelid: PN0751000 cidnum: HTC__038 2.3 hTC_Asia_WWE RUU (Android 4.4.3): M7C_DWG_K443_SENSE60_MR_hTC_Asia_WWE_6.14.707.1_Radio_1237.28.35.0516_NV_NVMFG_Indonesia_4.20_09A_re_re_391078_combined_signed- 1.27GB OTA updates (for Android 5.0): OTA_M7C_DWG_L50_SENSE60_MR_hTC_Asia_WWE_7.17.707.6-6.14.707.1_release_42612428jygdlwrssg2v9r- 672.7MB RUU (Android 5.0): PN07IMG_M7C_DWG_L50_SENSE60_MR_hTC_Asia_WWE_7.17.707.6_Radio_1237.29.35.0903 release_426122_signed.zip- 1.3GB RUU (Android 5.0.2): PN07IMG_M7C_DWG_L50_SENSE60_MR_hTC_Asia_WWE_7.17.707.6_Radio_1237.29.35.0903_CNV_CNV_Indonesia_4.20_09A_release_426122_signed.zip- 1.3GB MID & CID: modelid: PN0751000 cidnum: HTC__044 2.4 HTC_WWE_VNM RUU (Android 5.0): PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_WWE_VNM_7.17.425.5_Radio_1237.29.35.0903_release_425794_signed.zip- 1.3GB MID & CID: modelid: PN0751000 cidnum: HTC_059 2.5 APTG_TW OTA updates (for Android 4.4.2): HTC 802D (APGT) CID = 621 - OTA_M7C_DWG_K44_SENSE55_MR_APTG_TW_4.25.500.2-2.42.500.1 - OTA_M7C_DWG_K44_SENSE55_MR_APTG_TW_4.25.500.2-2.42.500.1 - OTA_M7C_DWG_K44_SENSE60_MR_APTG_TW_5.18.500.4-4.25.500.2 - OTA_M7C_DWG_K44_SENSE60_MR_APTG_TW_5.18.500.4-4.25.500.2 MID & CID: modelid: PN0780000 cidnum: HTCCN621 802t 1 HTCCN_CHS_CMCC RUU updates (Android 5.0.2): PN07IMG_M7C_DTU_L50_SENSE60_MR_HTCCN_CHS_CMCC_7.19.1403.31_Radio_1237.29.35.0903_release_426134_signed.zip- 1.4GB OTA updates (Android 5.0.2): OTA_M7C_DTU_L50_SENSE60_MR_HTCCN_CHS_CMCC_7.19.1403.32-7.19.1403.31_release_4372758wzrjhwfsqo0oo5p.zip OTA_M7C_DTU_L50_SENSE60_MR_HTCCN_CHS_CMCC_7.19.1403.35-7.19.1403.32_release_446173h22xw2x3o7i8v8pr.zip OTA_M7C_DTU_L50_SENSE60_MR_HTCCN_CHS_CMCC_7.19.1403.55-7.19.1403.35_release_458695yfehu7qw10cgztip.zip MID & CID: modelid: PN0780000 cidnum: HTCCN704 INFORMAL FIRMWARE Android 4.2.2 Android 4.4.2 SoulRom Dreamriseoriginal,Dreamriseoption fromKlaus.ad Tommybased on Chinese builds. From N-team ViperMyRombased on the DreamRise firmware Author:deadmetal1990 Android 4.4.3 Stockviper (15.06.2014) Firmware based on stock Sense 6.0 with a custom kernel and Venom-tweaks. From user700 Stockviper (16.11.2014) Firmware based on stock Sense 6.0 with a custom kernel and Venom-tweaks. From user700 Android 5.0.2 ViperSense (Current version 2.24 SoulROM (Current version 50.0 SixthSense Revolution 2.0.0 htc802w_Flyme-4.5.4.5R_RU_Cherlis M7C Soul Cherlis fin Sense7 htc802w_ViperOneM8_Port (Current version 4.6.1) Instructions Official update (RUU, OTA update) PTA Application Manual There are 2 ways to install / update the official firmware: 1. RUU firmware. This is a complete firmware device from scratch. RUU firmware, in turn, can be of two types: with the extension ****. Exe and ****. Zip. The firmware with the extension ****. Exe is sewn as follows: the phone is connected to the computer (the computer must see the machine) and the file ****. Exe is launched on the computer. Also, the device can be sewn through fastboot in the same way. The order of the firmware. ****. Zip is described below. 2. OTA update. This is a firmware update. The device must have a previous firmware version installed. The firmware should be preferably clean (official). If you deleted any system files, then the update is most likely not installed. The OTA update is placed exclusively on the firmware that is specified in the name of the OTA update, for example - OTA_M7C_DUG_JB_50_S1_HTC_Europe_2.41.401.1-2.19.401.1_release_3398289.zip - means that you should have the firmware with numbering 2.19.401.1 and the firmware installed. . Manual installation of RUU firmware of the form ****. Zip: For example, download firmware PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125.zip - 989.19 MB (Look carefully at the file extension, it is best to enable the display of file extensions in Explorer so that you do not have firmware PN07IMG.zip.zip). 1. Copy PN07IMG.zip to the root of the external SD card and reboot into BOOTLOADER. 2. The phone will detect the file and you will be asked to flash it, if you want to flash it, press the volume button to select yes. 3. The phone will flash approximately 10-15 minutes, carefully watch what is written on the screen. After the reboot, you will have the official RUU firmware installed. Manual OTA update: 1. Download for example OTA_M7C_DUG_JB_50_S1_HTC_Europe_2.41.401.1-2.19.401.1_release_3398289.zip - 131.61 MB and rename it to update.zip. 2. It is strongly recommended to make a full backup of the system beforehand (if something goes wrong), and also to charge the phone battery not lower than 70%. 3. Make sure you are working in a completely unmodified operating system. Additional files, such as Superuser.apk or others that provide the operating system with superuser rights, must be removed, and the changed system files must be restored to their original form, otherwise the update will not be installed (due to MD5 check). 4. Make sure that the OTA update that you are going to install is intended for your device and is installed on the corresponding previous version of the operating system (read above). 5. Copy the update.zip package to the device (internal or external memory). 6. Turn off the device (make sure that the Fastboot mode is disabled in the settings). 7. Hold simultaneously the volume down key and the power key until the bootloader starts. 8. The phone will try to find an image, but will not find it. And it will provide you with a menu that will contain the elements "FastBoot", "Recovery" and a few more 9. Select Recovery. Navigate through the menu using the volume buttons, and make a selection using the power button. Do not press several buttons at the same time. 10. Your device will boot into something with a red or green triangle with an exclamation point or synchronization sign. 11. Gently press the volume up (+) key, and while holding it down, press the power key. Then release both. 12. The phone will show the menu, one item of which is “apply from phone storage”. Select this item. Navigate the menu by using the volume up / down buttons. Apply item - power button. 13. Select the file "update.zip" that you copied to the root of the memory card. 14. The system will check the image. If the check gives an error, then the file was downloaded with an error, download it again and copy it to the memory card again. If the file is OK, the phone will reboot twice and open the home screen. Information adapted from the resourceforum.xda-developers Unofficial update ..... manual for RETURNING THE TELEPHONE IN THE BOXING STATE Unlocking / unlocking the bootloader Unlocking HTC downloaders through the official website of the company When unblocking through the official website, select from the drop-down list:All Other Supported Models Installation recovery 1. Unblock the bootloader using the sitehttp://www.htcdev.com/bootloader 2. Make sure that the "quick download" is turned off in the phone settings and completely turn off the device. 3. Download the device to the bootloader, the message should appear on the screenfastboot . 4. Connect the device on the screen, the inscription should change tofastboot usb . 5. Rename the file from the recovery torecovery.img and place it on your PC in the folder with the files fastboot. 6. Using the command line, go to the directory where you have the fastboot.exe file and execute the command fastboot erase cache and after fastboot flash recovery recovery.img 7. Restart the machine. How to make wipe wipe - literally wipe. With the help of wipes, user data (set by the user program), clearing the cache and cleaning the dalwick cache are cleared. As a rule, when installing the firmware, it is necessary to do all 3 wipes, but sometimes romodels write that it is enough to clear the cache and dalwick cache, in this case all user data and installed programs will remain on the phone even after installing the new firmware. To implement wipes in CWM, you must: - switch to CWM mode. - in CWM to clear user data select -Wipe Data / Factory Reset . - to clear the cache, select -Wipe Cache Partition . - to clean the dalwick cache select -Advanced =>Wipe Dalvik Cache . To implement wipes in TWRP, you must: - select Wipe and tick everywhereBesidesInternal Storage , SD card and USB OTG . Otherwise, format the external media, where you have backups of firmware and custom. ROOT (get / delete root What is Root and why do we need its rights? TermRoo t - one of the concepts of Linux, which lies at the heart of the Android kernel and those who worked with this operating system know what it is. Root is the account of the main administrator, or superuser. Having access to this profile, a number of possibilities appear that are not available in normal operation. So, having Root rights on Android, you can: Modify system files, themes, shortcuts, delete standard applications, Run Linux executables, Run special applications that significantly extend the capabilities of a smartphone, but require Root rights Take screenshots using apps like ShootMe, Back up your system, for example, using the popular Titanium Backup program. Installation Download the archive. We copy on external or internal memory. Restart in recovery and install. UPDATE-SuperSU-v2.46.zip(3.83 MB) How to remove the root Procedure for receiving S-OFF / Return S-ON(Free S-OFF can only be done if you have HBOOT 2.27 or lower. If HBOOT is higher, it is only charged.) The procedure for obtaining S-OFF for Sense 6 or just an updated device out of the box At the moment, there is no known free way to get S-OFF for updated devices! S-OFF for devices withHBOOT 2.23, 2.24(Android 4.1.2) S-OFF for devices withHBOOT 2.26, 2.27(Android 4.2.2) S-OFF for devices with HBOOT 2.49 (Android 4.4.2) This method is no longer supported by the author. S-ON return procedure S-ON recovery on all three types of HTC One Dual Sim Instructions in the archive. Return_S-ON.zip(403.87 KB) Firmware firmware Firmware can be stitched at S-ON and S-OFF . In the first case, you need a signedfirmware (from PTA or ruu) exclusively for your region and closed bootloader (otherwise get an error). In the second case (in the presence ofSuperCID ) You can sew firmware for any region (but only for your brand of device), in this case, the bootloader can not be blocked. So actually the process of the firmware itself: 1. Restart the phone to the bootloader. 2. Run the command line on the PC and go to the folder with utilitiesadb / fastboot , eg, cd c: \ android 3. Enter: fastboot oem rebootRUU 4. The phone will reboot, an inscription will appear on the screen on a black background.HTC 5. Enter: fastboot flash zip firmware.zip (After the first input, there may be an error "FAILED (remote: 90 hboot pre-update! Please flush image again immediately)". This is normal.Do not turn off or restart the phone in any case !!! ). 6. Enter again: fastboot flash zip firmware.zip The progress bar will not reach 100%, this is normal, the main thing is that OKAY appears on the console. 7. Enter the command to reboot: fastboot reboot Note. After the firmware firmware, you have installed stock recovery, and if you had custom firmware on the device, then the device most likely will not start but will constantly go to the bootloader window or will constantly reboot. Do not panic, but forcibly reboot the device into fastboot mode and become a moderator after the new one. Radio module firmware ..... Custom and stock recovery, radio modules Modifications BULLET GLASS MOD for ViperSense 2.17 stock 5.0.2 battery. Already this time colored 7colors HTC One Tweaker-discussion only in the topic indicated by reference. Mod battery to drain 5.0.2 Sound mod Custom kernels (kernels) for 802W (M7CDUG), 802D (M7CDWG) and 802T (M7CDTU) from the respected bgcngm 802Xtreem Instructions for the introduction of hack for automatic change of the name of the slot, depending on the installed card (operator). Version 1.0 Instructions for the implementation of a hack that allows you to run CDMA 3G Internet on 802d without having a driver in the first slot (in the first slot any SIM card GSM) + bonus widget for one-touch mode switching + mod to automatically change the name of the slot Patch Sense 7 Modified curtain for firmware ViperSense 2.24 miscellanea Restoring access to internal memory (/ sdcard) via Android Terminal Emulator How to make the camera work temporarily BACKUPS Full 4.4.3 TWRP (without ROOT) 802w (RU) Net drain - Backups of firmware About the lack of IMEI and radio Discussion of the topic "Android Pay does not start" Two Weiber on one dvuhsimochnike What is firmware What is firmware.zip? (Further FW) Firmware.zip is part of every OTA update from HTC. It contains important parts of the firmware: radio, bootloader, recovery, kernel, etc. Why is it important to flash firmware.zip and why do I need to flash it? It is recommended to have the latest FW stitched for your device for the best performance of the modem part and system stability. Sometimes it is necessary to have the latest version of the bootloader, otherwise your device may not work correctly with new system updates. Does the firmware.zip contain the firmware of the radio module? Yes, the radio firmware is included in the FW, and on S-ON devices the only method to update the radio is to flash the latest firmware.zip Why is it so important to flash FW before installing custom firmware? Because firmware.zip contains boot.img (ramdisk and kernel) which will replace the custom boot.img from any firmware that you have. Therefore, it is necessary to flash firmware.zip first, otherwise the boot.img of the custom firmware will be overwritten by the stock from FW. If you asked for firmware.zip after custom ROM was installed, just reinstall this custom ROM again. Does firmware.zip contain recovery image? Yes, FW contains a recovery image, so after firmware.zip firmware, you will need to flash the custom recovery again so that you can install custom firmware from it later. Can I flash any firmware.zip on any HTC One DualSim? No, if your device is in the S-ON state. To be able to flash FW on a device with S-ON, your MID (modelid, for example: PN0711000) and CID (cidnum, for example: HTC__001) must match the version of firmware.zip you want to flash. Also FW must be signed, i.e. unchanged. S-Off allows you to flash any FW (for your CID and MID). In addition, FW must be sewn for its type of device - for 802w, 802d, 802t. You can not flash the FW designed for 802w on the device 802d and vice versa, otherwise you will get a brick. If my MID or CID does not match, can I tinker the device while trying to flash firmware.zip, regardless of their inconsistency? While your device is in the S-ON state, firmware.zip firmware with inappropriate MID or CID will be interrupted with an error, nothing will be stitched in the end, so there is no risk of getting a brick in this case. Do I need a locked or unlocked bootloader, so that I can flash firmware.zip? Your bootloader must be locked (relocked). In the case of S-Off blocking the bootloader is optional. If I cannot flash a newer firmware.zip because the MID or CID does not match, does this mean that I cannot use custom firmware based on the latest updates from HTC? In most cases, you can use any custom firmware until you need to upgrade the hboot version. ADB and all that can be done with it If you enter adb help when you enter adb commands in CMD, it means that you have an old version of adb The current version of adb is 1.0.31. You can check the version with the commandadb version >>Here<< If arises"adb" (or "fastboot") is not an internal or external command, an executable program or a batch file: 1. Run the command line (Win + R, enter cmd and press Enter). 2. Enter cd c: \ android (instead of android, enter the folder where the adb.exe file is located). 3. Done !. Adb commands run on the phone with USB debugging enabled The fastboot commands are executed in bootloader mode (bootloader). Deciphering CID's \ MID's 1. What is MID: Simplified - this is the model number (has signs of belonging to a particular country). 2. What is CID: Simplified - this is the numbering of the firmware that can be put on the device (it also belongs to the region). HTC One 802w modelid:PN0771000 cidnum: HTC__001, WWE cidnum: HTC__A07, Russia cidnum: HTC__A48, Ukraine cidnum: HTC__Y13, Nordic cidnum: HTC__J15, HTC-GCC (Tech. Option NTS) Cidnum: HTC__032, EastEurope modelid:PN0772000 cidnum: HTCCN703, China Unicom HTC One 802d modelid:PN0751000 cidnum: HTC__621, Taiwan Cidnum: HTC__038, Asia cidnum: HTC__044, hTC_Asia operator modelid:PN0752000 cidnum: HTCCN702, China Mobile HTC One 802t modelid:PN0780000 cidnum: HTCCN704, China Telecom Required: Before you ask a question in the topic, you need to collect data on the phone using the appSMARTInfoor applicationsHTC Infoor teamsfastboot getvar all. The received data is laid out at the bottom of your post under the spoiler! Topics Curator: cherlis Send suggestions for filling caps in QMS Post has been editedCеrlis - 20.03.19, 21:52 Reason for editing: Links |
Message#34122 16.02.19, 12:41 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 09.03.14 HTC One Dual Sim Reputation: 0 | good day Tell me one more thing Cash and Dalvik Cash when you can clean them ??? Can I clean them when the phone is working normally, but it slows down a bit? Clearing the cache will not affect the work; more precisely, the data will not be deleted any photos, account, etc. |
Message#34123 16.02.19, 13:17 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 197 Check in: 31.01.09 Reputation: 21 | |
Message#34124 16.02.19, 20:49 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 09.03.14 HTC One Dual Sim Reputation: 0 | Not very informative like that !! |
Message#34125 16.02.19, 22:56 | |
Guru [offline] Topics Curator Group: Curators Messages 3960 Check in: 28.02.11 HTC 10 Reputation: 1957 | |
Message#34126 16.02.19, 23:46 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 09.03.14 HTC One Dual Sim Reputation: 0 | How often can you delete such a cache? Google account will be deleted? Thank you for the answers. |
Message#34127 17.02.19, 00:27 | |
GRAY [offline] Group: Honorary Gameday Messages 4626 Check in: 06.01.06 HTC HD2 Reputation: 305 | SaShaDelas, each time you reboot, you can do the cleaning of one and the other again ... more often ... but ... there is no sense in this if there are no requirements for any specific operation ... ... and hardly you will feel the acceleration of the system after the type of prophylactic cleaning ....- but you will wait each time for a new application of all system applications when loading the system ... no data will be affected and will not change. Post has been editedTalon - 17.02.19, 00:31 -------------------- Qtek s110 Fi E-Ten GloFiish X500 ☢ HTC TOUCH HD ☢ HTC HD2 ☢ HTC ONE M7 DS 802D s-offVipersense ☢ Huawei P9 Plus VIE-AL10KangVIP Ownice C200 "C" & C500 "8" (root) |
Message#34128 19.02.19, 10:27 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1255 Check in: 11.08.11 HTC Desire HD Reputation: 111 | [email protected], 04:46 Isn't it easier to put something like SDMaid and in the scheduler? -------------------- Motorola T2288, HW 6915, HTC Tatoo, HTC HD2, Galaxy S +, Desire HD, DNS S4502M, HTC Incredible S, Highscreen Boost, HTC Evo 3D, Higscreen Alpha GT, Alpha GTX, THL W11 2 + 32, Higscreen Thor |
Message#34129 03.03.19, 13:25 | |
Visitor [offline] Group: Active users Messages 22 Check in: 27.06.10 HTC One Dual Sim Reputation: 8 | Suddenly there are still users of this device 2019 - normal flight, not going to change :) For stock 55 firmware dual sim Status bar: 1) Network and notifications on the left 2) Clock in the center 3) System icons on the right 4) There are no hours on the lock. 5) The second sim icon (the one without 3G) is completely hidden OldiStyleSystemUI.zip(5.75 MB) Post has been editedCеrlis - 04.03.19, 18:03 Reason for editing: Spoiler |
Message#34130 04.03.19, 05:20 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 62 Check in: 25.02.12 Honor 9 Reputation: 0 | |
Message#34131 04.03.19, 11:28 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1255 Check in: 11.08.11 HTC Desire HD Reputation: 111 | |
Message#34132 05.03.19, 00:59 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 621 Check in: 17.12.08 ZTE Axon 7 A2017G Reputation: 67 | In the Magisk theme, version 18.1, as I understand, they brought support to android 4.2: [General] Support down to Android 4.2 Someone tried to pick up on the NTS? Here is 18.1: В® Magisk - The Universal Systemless Interface (Post Alex0047 # 82037953) Post has been editedblackcatss - 05.03.19, 01:01 -------------------- ZTE Axon 7 A2017G || Huawei watch || Pipo M6Pro 32g WiFi || RT-AC-88U |
Message#34133 05.03.19, 07:55 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 99 Check in: 21.05.12 HTC One Dual Sim Reputation: 2 | Can you please tell me the firmwareViperSense: Android 5.0.2 When I talk on the phone without a difference, I called or I’m all complaining that I’m hard to hear. (I tried to just turn on the application with a voice recorder, it writes normally there is no distortion, everything is clean) How to exclude the moment of iron breakdown? I did wipe cash / data, put the same firmware on the new one does not help, I do not want to change the phone, but I'm also tired ...stumbled upon a messageis the truth there Honor, but maybe with htc is !? Or can the firmware change to 6.13.401.3!? Or change the radio module, but they say that the firmware is better .. Post has been editedCеrlis - 05.03.19, 17:27 Reason for editing: Post -------------------- -M7CDUG-S-OFF-UNLOCKED-twrp- |
Message#34134 05.03.19, 22:38 | |
GRAY [offline] Group: Honorary Gameday Messages 4626 Check in: 06.01.06 HTC HD2 Reputation: 305 | blackcatss to deliver something delivered .... - but only with the support in the kernel of nominal spaces ... - actually with one line and smallpatchesthe whole thing is done ... but ... - I immediately unsubscribed a month ago in the kernel branch to xda - asked bgcngm'a about this - but ... / Post has been editedTalon - 05.03.19, 22:42 -------------------- Qtek s110 Fi E-Ten GloFiish X500 ☢ HTC TOUCH HD ☢ HTC HD2 ☢ HTC ONE M7 DS 802D s-offVipersense ☢ Huawei P9 Plus VIE-AL10KangVIP Ownice C200 "C" & C500 "8" (root) |
Message#34135 05.03.19, 23:02 | |
GRAY [offline] Group: Honorary Gameday Messages 4626 Check in: 06.01.06 HTC HD2 Reputation: 305 | ViperSense 2.21 / 2.24 - can anyone tell me after which the setting "Screen and gestures" starts to fall? I can’t track down ... toli something I delete the type I don’t need .... toli it something is updated ... - after which the entry to this setting crashes -------------------- Qtek s110 Fi E-Ten GloFiish X500 ☢ HTC TOUCH HD ☢ HTC HD2 ☢ HTC ONE M7 DS 802D s-offVipersense ☢ Huawei P9 Plus VIE-AL10KangVIP Ownice C200 "C" & C500 "8" (root) |
Message#34136 05.03.19, 23:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 197 Check in: 31.01.09 Reputation: 21 | Talon, the same trouble, I think to roll a full stock firmware. Or for the start of the firmware. My display has stopped responding adequately to notifications (it is constantly on, while it is locked). -------------------- Htc Arte100 "Htc HD2 Leo" Htc Sensation XE "Htc ONE X 32Gb" Htc One M7DS + Htc one me dual sim "..... |
Message#34137 06.03.19, 05:01 | |
GRAY [offline] Group: Honorary Gameday Messages 4626 Check in: 06.01.06 HTC HD2 Reputation: 305 | I rolled back and rolled and .... ...- and still I can not catch the moment and because of what begins ...) Well, a high probability that something is being updated ... but what ... - it is necessary that the scrabbling words should be - according to the log, I think it will be clearer to them (since I don’t even set the log for the direction in which I can read ... / -------------------- Qtek s110 Fi E-Ten GloFiish X500 ☢ HTC TOUCH HD ☢ HTC HD2 ☢ HTC ONE M7 DS 802D s-offVipersense ☢ Huawei P9 Plus VIE-AL10KangVIP Ownice C200 "C" & C500 "8" (root) |
Message#34138 13.03.19, 04:42 | |
Visitor [offline] Group: Users Messages 12 Check in: 16.01.15 Reputation: 0 | Does anyone have experience using ViperSense sound mod? (in the header there is a link to "Project_ERA_HTC_GPE_SENSE_ZeroInfinity_v15.2") After installing the mod, the sound in the system is completely absent. I tried to initially increase the speaker volume through "ViPER FX", but did not notice the changes. |
Message#34139 16.03.19, 10:44 | |
Novice [offline] Group: Active users Messages 37 Check in: 09.05.07 Asus Fonepad 7 ME175CG Reputation: 0 | Hello everyone, put Rom Flyme OS 4.5.4.5R Android 5.0.2, everything would be fine, but the Tele 2 menu pops out permanently, from which you can not exit the button, you have to press the house thereby closing all applications open. How to solve a problem? Sim menu from applications can not be removed Post has been editedRatibory - 16.03.19, 11:12 |
Message#34140 16.03.19, 11:34 | |
Old resident [online] Group: Friendssavagemessiahzine.com Messages 1255 Check in: 11.08.11 HTC Desire HD Reputation: 111 | Freeze Having root, delete the priv-app from the priv-app, or the app file stk.apk -------------------- Motorola T2288, HW 6915, HTC Tatoo, HTC HD2, Galaxy S +, Desire HD, DNS S4502M, HTC Incredible S, Highscreen Boost, HTC Evo 3D, Higscreen Alpha GT, Alpha GTX, THL W11 2 + 32, Higscreen Thor |
Message#34141 16.03.19, 12:28 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1335 Check in: 23.09.10 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 60 | |
mobile version | Now: 05/19/19, 21:23 |