[X]Assistant

[GVS276]

Explay Informer 705 - Firmware (OS 4.0)
Explay Informer 705
Description | Discussion пїЅ | FirmwareпїЅ

Drivers and Utilities

Boxchip_USB_Driver
LiveSuit v1.09 RU

Official firmware

Informer705-20130624-v1.04
v.1.00

Unofficial firmware

Android 4.0.4 (ICS)
Android 4.1 (JB)
Android 4.2 (JB)
CyanogenMOD 10
AOKP

Instructions

Instructions on firmware:read hereorhere
Instructions on firmware for CyanogenMOD 10

miscellanea

Program to manage the status bar (resize / delete)

Screenshots

For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.

Post has been editedbrant34 - 22.08.16, 22:04

Reason for editing: Updating

[in vain]

To get a working android 4.2.2 you need to install via the live sitethis firmwarebyof this instructionand replace withroot guidetwo files: in the system \ usr \ foldergsensor.cfg, and in the system \ usr \ keylayout foldersun4i-keyboard.klor applythis patch. After the firmware, it is necessary to immediately go into the recovery and make a wipe date / factor resets. To keep the battery longer, it is advisable to install the programCPU Masteror similar and change the processor mode to interactiv, and the frequency to 204MGz min and from 600 to 1200MGz max. On this firmware, the device works more smoothly than on the official one, and there are no problems with games on it. Route and cwm recovery in it are preinstalled, the file vold.fstab for changing the places of internal and external memory is changed.
Just in case, links to the office. firmware1.00and1.04.
I warn youAll actions you do at your own risk!

Post has been editedin vain - 17.07.13, 08:15

[g5747]

in vainAlong the way, all picked up! Even in a hat you do not need to throw, your message and so the very first! : D

[in vain]

Unfortunately today again caught the glitch with non-awakening. To bring the tablet out of this state, you need to press and hold the power button for 10 seconds. Then you can turn it on.
Who put 4.2.2, unsubscribe from all such a problem?

Post has been editedin vain - 18.06.13, 09:46

[dmitfly]

in vain @ 06/16/2013, 10:35

Who put 4.2.2, unsubscribe from all such a problem?

I'm fine with that. The only thing that infuriates is that the inertness of hard buttons is not treated. Neither a complete replacement of the folder, nor the replacement of a specific file.

[dmitfly]

in vainsound buttons and "house" swapped. By the way, try to put a clean port 4.2 from the same tireless taysky:Link from Yandex.Disk. Personally, I liked it. Everything superfluous has been deleted.

Post has been editeddmitfly - 18.06.13, 21:42

[in vain]

Dmitfly, patch for fixing buttons and G-sensor.correction_buttons & G-sensor_4.2.2.zip(256.79 KB)

[ossetianpies]

Hello everyone))
Worth of. firmware. While I do not touch or experiment. My wife told me not to touch the tablet, but every time I’m tired of playing a new game every time))) Waffle doesn’t work, but she doesn’t need it yet.
Here I wait for the final, corrected, normal firmware, without patches, etc. etc.
Tell the PZH, will they bring at least some thread of firmware for our state employee? Thank you)): thank_you:

[g5747]

Ossetianpies @ 06/19/2013, 10:25 PM

will any kind of firmware be brought to our mind

Not . On the bourgeois portals respond like this: "... your A13 processor, we are not in his mouth ..."

[in vain]

Ossetianpies @ 06/19/2013, 16:25

My wife told me not to touch the tablet, otherwise I’m tired of playing a new game every time.

Saving games is usually in the android folder on the SD card. Save it before the firmware, and when you install the game again, restore it. And the wife will be pleased.
These Jelly Bean 4.2.2 are all similar, as they are ports with a single firmware from Manta MID705. The processor works strangely for them. To control its frequency and mode of operation, I used the No-Frills CPU program. It shows that the default frequency is 60MHz - 1.2GHz fantasy control. In this mode, when you touch the screen, the frequency should instantly increase to 1.2GHz, and at rest quickly decrease to 60MHz, but in fact, if you look at the statistics, the processor constantly operates at 1GHz, which corresponds to the performanse 1GHz mode. Hence, a fast discharge of the battery and a low result in the antitu test. If I change the mode, for example, to the 204MHz-1.2GHz interactive controller, then judging by the statistics, it starts changing the frequencies normally and the result in the test’s test rises, I think the battery will last longer.
Here is another Jelly Bean 4.2.2 from the forumtechknow.meand my patch for her. It supports init.d and a bunch of scripts are stuffed into it.Not recommended for ordinary users.. CookedRom v1.3aa(mirror)
for 4.2.2 techknow.me.zip(506.93 KB)


Post has been editedin vain - 17.07.13, 08:19

[prontsa.o.a]

Well, in general, I flashed my tablet on 4.2, fixed the hard buttons and g-sensor and everything works well, it was a couple of times when I took out the USB flash drive and it rebooted, but it is rare and I don’t use all the rules and wake up all at the expense of the camera (I don’t use it) You can all the rules but the program that you said here needs to be downloaded)). And so you really really heroes made the firmware for our little animal especially 4.2)

[in vain]

Who cares about modifying firmwares is a good tool for this under Windows.

Short description:

1. Work on USB and Wi-Fi using the ADB interface.
2. Work with the build.prop file - editing, backup / restore.
3. Install / uninstall, check for ROOT access rights.
4. Ability to replace the download animation.
5. MultiMod - the ability to create updates in the update.zip format for further firmware via recovery.
6. Ability to install applications (APP) on the device from a computer, backup / restore applications from the device.
7. Creating / restoring firmware from FULL DUMP.
8. Work with the kitchen - collecting / unpacking img.
11. Installing a hacked Android Market with full access to Android applications.
12. Run on the console device (command line) ADB.
+ many, many more.

In the archive, the program and Google translation of the description from the developer's site.Uberizer_v1.6.zip(99.31 MB)
Here's anotherfirmware editing guideandkitchen under Linux.

Post has been editedin vain - 26.06.13, 18:59

[ISIEIAI]

in vain @ 06/13/2013, 23:19

There was another problem on 4.2.2 with the release of the device from sleep. Instead of waking up, the device reboots.

Vino lock? Try to disable it altogether.

[dmitfly]

Offsite Link
Informer 705 Firmware - v1.04

1. Fixed a problem with wi-fi
2. Changes to the interface
3. The following applications have been added: Yandex search, Yandex metro, Yandex electric train, Yandex movie poster, Yandex store, hit store (Games & Software), svoy.
Guys, did this day really come?)

Post has been editeddmitfly - 28.06.13, 20:30

[11-00]

But Yandex-rubbish was not enough for happiness: angry:

[dmitfly]

11-00 @ 28.06.2013, 22:36

But Yandex-rubbish was not enough for happiness

Well, at least Wi-Fi robit)

[11-00]

dmitfly

And what is the android inside?

[ossetianpies]

: sveta: wow! Uryayayayaaa! Taking away! THX )))

[zvonstruny]

inside android 4.0.4

[11-00]

When updating the device with factory firmware v1.00 to v1.04, the waffle flies. I tried on two devices. Apparently the filling of last year's and new tablets is different.

[dmitfly]

Everything, atas, I turn back to 4.2. Less than 2 days ago, I stitched with version 1.0.4, today the tablet is peacefullay almost all day on the shelf idle. Today, it means I turn on the device, but it gives me an eternal hang on the download. Well, thank God, because this office is not very good for me. I liked the firmware. At 4.2, at least the g-sensor is adequate, and I'm used to it)
P.S. Can I try to reach the technical support of the exp, and offer them 4.2 for revision? They, I think, will be glad themselves)