Sony Xperia SP - Modification and decorations | C5302, C5303, C5306, HuaShan
(under reputation) and let us know who helped you, whom to put a plus.
and
for posting evaluation.Maud the runoff for firmware based on JB (The Code, deodeks)!
What is done:
1. Reduced size of the drain (cut unneeded permissions)
2. the size decreased from 105 MB to 11 MB, i.e., further cleared of almost 100 meters in the system (see. sreens)
3. The rest is native threads without deterioration
Before
 |
After
 |
Installation:
1. Download and install via Recovery
Download
Themes_Stock_Lite.zip (11.42 MB) Maybe someone wondering:
Respectedfurniel I made all the options the batteries (like all) to 257 PCT and put in the finished catalog:
http://sourceforge.net/projects/batterymod...)/12.0.A.1.257/
Posted on 07/11/2013, 23:56:
ivan-68 ,
I noticed a jamb EEPROM 257 PCT:
by connecting the stick through the OTG-cable in the status of the message such as "Capture".
You can somehow remove this nasty? : Rolleyes:
Until the root can not remember if it was that.
Yes, Paragon NTFS worth while, but the screenshot on message even when there is no Paragon aisles,
ie, even if the flash drive is FAT32 and the system automatically determines it.
Post has been editedFreeflax - 11.07.13, 23:59
Respectedfurniel I made all the options the batteries (like all) to 257 PCT and put in the finished catalog:
http://sourceforge.net/projects/batterymod...)/12.0.A.1.257/
Posted on 07/11/2013, 23:56:
ivan-68 ,
I noticed a jamb EEPROM 257 PCT:
by connecting the stick through the OTG-cable in the status of the message such as "Capture".
You can somehow remove this nasty? : Rolleyes:
Until the root can not remember if it was that.
Yes, Paragon NTFS worth while, but the screenshot on message even when there is no Paragon aisles,
ie, even if the flash drive is FAT32 and the system automatically determines it.
Post has been editedFreeflax - 11.07.13, 23:59
And when you do a screenshot, climbs another strange message)
But it is not particularly concerned about)
Post has been editedpozitiv_chel - 12.07.13, 09:10
But it is not particularly concerned about)
screen
 |
Post has been editedpozitiv_chel - 12.07.13, 09:10
FreeFlax @ 11.07.2013, 23:56
by connecting the stick through the OTG-cable in the status of the message such as "Capture"
IDs of these messages are different by one, most likely it is purely a bug Sony, in principle, is simple to correct, it is necessary to look
pozitiv_chel @ 12.07.2013, 06:18
And when you do a screenshot, climbs another strange message)
the latest versions of my curtains is corrected
People, hide the screens under the spoiler, do not enjoy the fact that we still do not have the Curator
Post has been editedivan-68 - 12.07.13, 08:19
ivan-68, please, finished my Yui systems need a clear status and Navi Bars with the smallest navigation keys SystemUI.apk (6.22 MB)
file
SystemUI.apk (6.22 MB) IvanMoroz051186 @ 12.07.2013, 08:30
you need to clear the status of the Na'vi and bars, with the smallest navigation keys
statusbara clear how much? 100%?
and where the curtain of a post?
Post has been editedivan-68 - 12.07.13, 08:38
Timsels @ 12.07.2013, 08:45
perform Wipe Cache Wipe Dalvik Cache and necessary? I just do not exist, there are wipe cache partition and all
in principle, not necessary and so should work
and those items you have read here:Sony Xperia S / SL - Firmware (Android 2.3.7, Android 4.xx) (Post # 14420501)
Posted 07/12/2013, 8:57:
IvanMoroz051186 @ 12.07.2013, 08:56
like as not, I made curtains of runoff events
then a necessary and android.policy.jar, otherwise transparency will not
Timsels @ 12.07.2013, 09:27
backup system done, remove the desired junk
now you can put the buns, just a small piece of advice: do not rush to put all at once, place one-two-three fashion, are like a day or two, look at the behavior of the body (some mods require running-in, such as the new parts in the mechanism).
yes, and put immediatelyВ® BusyBoxMost mods without it will not work properly
ivan-68,
I have noticed, decided to put Maud curtain in style Meizu firmware for .211 and .257 (deodeks)!
and after a reboot izchezla Wirth buttons and status bar
I have noticed, decided to put Maud curtain in style Meizu firmware for .211 and .257 (deodeks)!
and after a reboot izchezla Wirth buttons and status bar
IvanMoroz051186,
your blind, try
SystemUI.apk (6.22 MB)
in your policy all the necessary changes have already been made: yes2:
your blind, try
Download, move to system / app with rights 644
SystemUI.apk (6.22 MB) in your policy all the necessary changes have already been made: yes2:
ivan-68,
how to make a backup of the same file? and then I put a lot but because one would have to change all
how to make a backup of the same file? and then I put a lot but because one would have to change all
Timsels @ 12.07.2013, 10:19
how to make a backup of the same file? and then I put a lot but because one would have to change all
В® Titanium Backupto help you
ivan-68 @ 07/12/2013, 00:44
2. the size decreased from 105 MB to 11 MB, i.e., further cleared of almost 100 meters in the system (see. sreens)
That is, it turns out that in the native subjects 90% of the code - the unnecessary junk ?! As a little hard to believe ... Somewhere (in some of the modes) is likely such a scrubbing theme collapse.
Croco @ 12.07.2013, 11:04
That is, it turns out that in the native subjects 90% of the code - the unnecessary junk ?! As a little hard to believe ... Somewhere (in some of the modes) is likely such a scrubbing theme collapse.
nothing in doubt, I am responsible for my actions and I know what I'm talking
vozmem example themeBlueTheme
unpack and we see there are 4 folders with images:
drawable-hdpi - the weight of 0.6 MB, for HDPI resolution, delete
drawable-sw600dp - the weight of 8.4 MB, for a tablet resolution, delete
drawable-xhdpi - the weight of 1.2 MB, our permission, leave
drawable-xxhdpi - Weight 2.5 MB, to enable XXHDPI (type Zetki), remove
as a result we have removed 11.5 MB, and the initial weight was 13.2 MB bend, the result is obvious
Posted 07/12/2013 11:24:
IvanMoroz051186 @ 12.07.2013, 11:17
hurry, does not work
later still look, throw in a personal. There you have some problems when unpacking, crooked campaign have changed the schedule without compilation
ivan-68 @ 07/12/2013, 12:24
as a result we have removed 11.5 MB, and the initial weight was 13.2 MB bend, the result is obvious
OK! super :-)
Plus sign to you ...)
Timsels @ 12.07.2013, 12:37
then you can remove the bugs and will not be?
you can, but ...
except that file in the system / vendor /overlay , It is necessary to remove the same by way of data / resource-cache , Overload the body, and everything will return
Post has been editedivan-68 - 12.07.13, 12:44
Maud Lokskrina with transparency for firmware based on JB (The Code, deodeks)!
What is done:
1. For the base taken lokskrin here:Modified lokskrin for firmware-based JB
2. Added transparency when you click on the screen to unlock, ie now completely transparent
3. For transparency of the lock screen (ie on the lock screen will display a topic, live wallpaper or wallpaper that stands in your body) must perform a series of operations:
- install lokskrin any background (in Settings-Display-Screen-Lock Wallpaper)
- erase the data from the applicationLock screen
- reboot the phone
Screenshots
 |
 |
 |
Installation:
1. Download the file and install via rekaveri
Download
Lockscreen_Transparent.zip (463.06 KB) for modders
Human substrate when pressed to unlock
As usual, everything is very simple, the main thing correctly to find: hang:
UxpNxtLockScreen \ smali \ com \ sonymobile \ lockscreen \ widget \ blindslayout \StaticBlindsSettings.smali
highlighted in red for the 100% transparency to change0000
it should work out
You can experiment, for example by replacing in19c8 it turns out like this
reverse side color of blinds changed slightly lower in the methodgetBlindStrokeColor
As usual, everything is very simple, the main thing correctly to find: hang:
UxpNxtLockScreen \ smali \ com \ sonymobile \ lockscreen \ widget \ blindslayout \StaticBlindsSettings.smali
.method public getBackgroundLayerColor () I
.locals 1
.prologue
.line 95
const v0, -0x6100
return v0
.end method
.locals 1
.prologue
.line 95
const v0, -0x6100
return v0
.end method
highlighted in red for the 100% transparency to change0000
it should work out
.method public getBackgroundLayerColor () I
.locals 1
.prologue
.line 95
const v0, -0x0000
return v0
.end method
.locals 1
.prologue
.line 95
const v0, -0x0000
return v0
.end method
You can experiment, for example by replacing in19c8 it turns out like this
Screen
 |
reverse side color of blinds changed slightly lower in the methodgetBlindStrokeColor
Post has been editedivan-68 - 12.07.13, 21:29
ivan-68, I'm sorry, s5303, Ruth .257, the bootloader is locked, The Code.
After changing the theme - desktop background and lokskrin
Post has been editedhmr91 - 12.07.13, 21:29
After changing the theme - desktop background and lokskrin
 |
 |
Post has been editedhmr91 - 12.07.13, 21:29
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement