[X]Assistant

[wexxxx]

SP Flash Tool download

Version: v5.1912
Last update of the program in the header:21.11.2018


Short description:
The flash program for smart phones based on MTK.

Description:
SP Flash Tool - It is a utility for the "Firmware" of Android devices on the MTK platform. In this topic I will try to clearly explain the possibilities of the program, as well as to disassemble and systematize the errors that arise when working with this program. Also here will be the current driver versions. It is planned to replenish information on problems and errors, as well as their decision on the personal experience of users. If you encounter a mistake, the description of which is not here and you know / do not know how to solve it, then this topic is for you. I also warn you that this topic only concerns the SP Flash Tool, errors and problems of the program Flashtool (This is a different program), and other programs will not be discussed here.

Problem Description Template

1. Background of the problem.
   
2. The full name of the device and a link to the subject of the device onsavagemessiahzine.com(in the presence of)
   
3. Version of the USB flash drive and operating system
   
4. Are there Russian letters in the paths to the flasher, scatter and firmware? Should not be present, so you should fix all the way to the publication of the issue in the topic.
   
5. Are the drivers installed for the preloader (not to be confused with adb drivers)? Is the device in the "Device Manager" defined without an exclamation mark?
   
6. Read and understandrecommendations for connecting the device with firmware ?
   
7. What activities were carried out while trying to solve the problem?
   
8. A clear description of the problem
   
9. Attach screenshots to the message.
   

Basic information

1. Recommendations for connecting the device for firmware
   
2. Always copy the folder with the flasher and firmware to the root of the system disk and work from it, because This often helps to avoid certain problems.
   
3. What if you see an “Unknown Device” in Device Manager
   
4. It’s not a secret that in different batches of Chinese phones they sometimes change hardware components that cannot work correctly with firmware for similar devices from the previous batch, of course you will not get a non-working phone, but the software provided by the manufacturer to retailers is often not the “freshest” "and after flashing new devices with a version of software designed for old revisions of the device, the user risks getting a partially idle phone. To avoid this, it is extremely strongly recommended to make a full rom-backup phone before flashing the device!
   
5. Applies to phones on the processor MT6575 and MT6577: You need to sew preloader and dsp_bl only in the case of a brick rise! In all other regular updates and flashing NEVER, do not put these checkboxes in the SP Flash Tool and DO NOT include formatting! You may have problems with which you will not cope at home or it will be difficult to do it. The mindless flashing of these sections is absolutely useless and very risky, especially on the platforms MT6575 and MT6577.
   
6. Regarding other MTK phones when flashing devices via SP_Flash_Tool, do not sew the preloader file unless absolutely necessary and DO NOT enable formatting.
   
7. The logs of the program SP_Flash_Tool are stored along the path:C: \ ProgramData \ SP_FT_Logs \ "Date folder" \ "Log files" , and also they can be opened through the menu of the USB flash drive Help ->Open logs folder .
   
8. Recommendations for connecting the device for firmware
   
9. Ports for normal and emergency firmware using SPFT
   
10. Translation help (help) on the SP Flash Tool
    
11. Description of SP Flash Tool firmware modes
    

Drivers, software, utilities (current versions)

All for Windows

• VCOM / PRELOADER Drivers
  • All about firmware drivers from A to Z.
    
  • Universal drivers, for Windows 7/8/10, tested on all three operating systems.
    
  • MTK driver package(with auto installation of driver for firmware via bat file) MTK_drivers.rar (821,41 РљР‘)
    
  • Package with installation INF-file, self-written certificate and installation instructions insideUSB-to-Serial_1_0.zip(5.91 KB)
    
  • Package containing both VCOM / PRELOADER firmware driver and ADB driver in exe-autoinstallerDriver_Auto_Installer_EXE_v5.1632.00.zip
  • Signed vcom and adb drivers that can be installed without disabling signature verification.
  
  
• ADB drivers
  • Universal driver UniversalAdbDriverSetup6.msi (8.78 MB)
    
  • Only adb-driver (manual editing of drivers is made only in this package)MTK_Android_USB_Driver.rar(8.26 MB)
    
  • Package auto installation driver adbAdbDriverInstaller.exe(9 MB)
    
  
  
  
• SP Flash Tool
  • The current version of the flasher
    SP Flash Tool v5.1912
    ANDSP_Flash_Tool_exe_Windows_v5.1844.00.000.7z
    
  • Secured flash driver special versionSP_Flash_Tool_exe_Windows_v5.1515.00_temp.rar(25.32 MB)
    
  • The minimum version of the flash driver for devices on the MT67xx platform (flash drivers below this version are not recommended for the MT67xx platform)SP_Flash_Tool_exe_Windows_v5.1444.00.000.rar(24.29 MB)
    
  • The strongest version of the flash driver for analyzing the branch at the moment, but it does not work with blocks of more than 4GBSP_Flash_Tool_v5.1352.01.rar(23.37 MB)
    
  • Older versions of the flash driver can be found.hereorhere
    
  • ReleaseNote (description of changes and platform support by different versions of the utility)//savagemessiahzine.com/forum/…sh_Tool_v5.1816.00.zip
  • A set of BirdA Flash Tool of different versions (from 1316 to 1524 (4.0)for firmware devices built on the project birda.
    How to determine the device belonging to the birda project

    Determining the device's belonging to the birda project is simple: open the scatter-file with the firmware via the Notepad ++ program and see if there is a line like BIRDTOOLMINVER [3.4] at the very beginning of the file (the numbers may differ). If there is no line, then this program is not required for you and you need the reference sp flash tool located on the links above. If the line is present, then this utility is for you. If you still want to use the reference flasher for flashing this device, then open the scatter file with the firmware via Notepad ++ and delete the top line of the BIRDTOOLMINVER [3.4] type (the numbers may differ), then you can download this scatter file to the standard version SP Flash Tool.
  
  
  
• Programs
  • SP MDT - SP_MDT_exe_v3.1304.00_A2013.02.26_customer.rar (2.94 MB)
    
  • MtkDroidTools v2.5.3Modified version (updated ADB components, added config with extended processor base, disabled beta functions in config, leaving only working solutions and packed in repack for automatic installation of the program)MTK Droidtools UPD repack.exe(10.09 MB)
    
  • A utility for mounting ext4 imagesLinux_Reader.exe(21.41 MB)
    
  • Utility for distilling factory images in ext4 format [sgs2toext4.7z(17.77 KB)
    
  • Notepad ++
    
  • The program for displaying and removing USB drivers installed on a computer x32 -USBDeview.v2.30.x32.rar(78.23 KB)
    x64 -USBDeview.v2.30.x64.rar(96.29 KB)
    
  • Hex editorhexedit

All for linux

• The version of the flash driver for Linux (64 bit) SP_Flash_Tool_exe_Linux_v5.1844.00.100.zip | Instructions for use
  
• Mini-FAQunder the version for linux andadditionto mini-FAQ and moresmall addition
  
• Linux firmware experienceusertwemas
  
• The continuation of the subtleties of the firmware from under Linuxfrom usertwemas
  
• Another way to flash under Linux
  
• If FlashTool does not enter Advanced Mode, ctrl + alt + v changes nothing.
  
• Running SPFlashTool on Ubuntu 04/14/03/14.10 / LinuxMint17.2
  
• Features when using debian flasher
  
• How to edit offline firmware on Ubuntu 16.10.
  

Instructions and manuals

• General post with instructions

Information on SP Flash Tool errors and solutions found

Post has been editedqq1978 - 23.04.19, 11:09

[tiikeri]

Guys, tell me what the error is.



Log

BROM_DLL_V5.log(2.2 MB)

[n-bear]

In SP Flash Tools 5.1343.1, except for the "Format & Download only" methods,
"Update firmware", "Download only" one more item appeared "MOTA SIU Like".
Has anyone encountered this?
There is only one topicthismessage mentioning this term.

Googled somethinginteresting.
According to the translation - firmware only kernel and system.
Very useful stuff.
In the evening I will check.

Post has been editedn-bear - 09.11.14, 12:31

[bysterov]

The people, do not kick strongly and used their theme and this one. The question is how to change cwm to stock recovery. I changed it for backup

[wexxxx]

n-bear,Yes, really something fresh, sign off as what, but he did not come across this item, I wonder)
bysterovAnd to include logic ?? Obviously, to flash only the recovery, then you need to leave a daw only on it, and the rest according to the instructions. Well, I swear to read such posts.

Post has been editedwexxxx - 09.11.14, 23:02

[l33tn00b]

n-bear,MOTA SIU LIKE is used instead of OTA update. Those. he sews the boot and the system on the current markup (if everything works out, otherwise the error), while not overwriting usrdata and cache.

[kisatik]

Friends tell me what's the matter, the body of the Lenovo S650 connects to the computer and immediately disconnects, permanent reconnections! It is impossible to flash, a red stripe passes and an error 4001 comes out! Also, when you turn on the body on the boot screen below the word powered by android, two lines are displayed TOOL DL image File and uboot is blocking by dl info Who faced this?

[vladigor]

kisatik
SP_Flash_Tool is the flash driver for MTK smartphones. (Post # 28363865)

[zodia4]

[email protected], 01:04

Dear. Help to spread the phone. Qumo Quest 502 MTK6572. The phone worked fine, installed the audio engine beats through cwm, but PowerAMP did not work on it and I decided to install viper4android. After that, the phone stopped loading and hung on the splash screen, but no longer entered cwm. I decided to reflash through the SP Flash Tool and did not finish reading the instruction and chose format and download. After that, the phone stopped turning on at all. Device Manager displays mtk usb port. when trying to flash through spft error 5054 and the phone every 15-20 seconds it connects then disconnects from the computer. the driver reinstalled +100500 times and tried on different computers. help to revive the device do not let it fly out the window.


Logs

Doogee dg300 firmware came up

[msferrari]

BROM ERROR: S_STORAGE_NOT_MATCH (3167)
Flashtool_20140812 (v5.1428.05.000)
THL T200 smartphone does not turn on after charging. Does not respond to buttons. stock + root (through framrut) tell me where to dig?

Post has been editedmsferrari - 11.11.14, 18:36

[igorpet93]

I know the guys are not writing a topic here, but then it seems to me that there are more chances for salvation, so Alcatel OT 4030d flashed the phone through Flash_tool and forgot to uncheck the Preloader and dsp_bl checkboxes and it doesn’t turn on, the computer detects it, but Flash_tool does not issue it is a window (in the spoiler) please help what to do?

[jurab]

Hello!
TESLA IMPULSE 10.1 OCTA Tablet (CQ188) Has Stopped Startinghttp://e-tesla.pro/tesla_impulse_101octa
Firmware with flasher downloadedftp: //ftp.t-service.pr…10.1%20octa (cq188) .rar
The driver set, when connected, is defined as MediaTek DA USB VCOM Port
The firmware process does not start, I already tried the SP Flash tool to download the latest one and threw the driver from here, it is determined but the firmware process is not running. Please help?

[mr fixed]

[email protected], 17:19

Creating a Rom-backup (FULL BACKUP without user data)

And how to create a full backup with data? For personal peace of mind?

[wexxxx]

Mr. Fix,A hundred times in the topic discussed.
Cleresil,What other recovery file? This is a scatter file, always lies with the firmware under the flashlight or dump.
jurab,If the firmware does not start and even there are no errors, it is usually still a problem with firewood.

Post has been editedwexxxx - 12.11.14, 15:17

[motoroller]

ARDEO2001 @ 11.12.2014, 20:22

Help I can not figure it out! The body on the computer is defined as COMport, it appears for 2 seconds and disappears and so endlessly. I can not flash MTK 6582.

The same garbage. :(
Haier W718. If you connect it without a battery, a new device appears in the Device Manager and disappears after 2 seconds, immediately appears again. And so on to infinity. But I managed to put the driver on it. (MediaTek PreLoader USB VCOM Port began to appear and disappear)
If you plug in the battery, the new device appears, disappears after 2 seconds and no longer appears.
I downloaded the firmware, chose the scatter-file, clicked Download, connected the phone, inserted the battery, something started, then Vindouz did "tadam!" ("something has fallen off from YUSB") and the Flash Tool generated an error BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149).
The latest version of the Flash Tool did not help ...

Attached files

BROM_DLL_V5.log(802.74 KB)
QT_FLASH_TOOL.log(33.9 KB)

[wexxxx]

motoroller,And the latter is not necessary, you need to sort out different versions for a fall. And also in advance to study the topic of his apparatus, because There are nuances and recommended versions in the topics on the device. Here is the last starting point and everything is generalized and for a general understanding of the essence, about the nuances to learn strictly in their topics.

Post has been editedwexxxx - 12.11.14, 22:17

[Detel]

Help with the definition of the problem: when flashing, the red bar has time to run, and then the sound of disconnecting usb, then usb is connected, and so all the time, here are the log files from flashtool, thank you in advance if you can help.

Attached files

BROM_DLL_V5.log(156.92 KB)
EBOOT_DLL.log(2.41 KB)
META_DLL.log(2.51 KB)
SP_FLASH_TOOL.log(2.3 KB)
SP_META_DLL.log(2.13 KB)

[atomicsam]

I ask for help from people more knowledgeable
have Explay Tornado
got scatter file

...
- partition_index: SYS20
partition_name: BMTPOOL
file_name: NONE
is_download: false
type: NONE
linear_start_addr: 0xFFFF00a8
physical_start_addr: 0xffff00a8
partition_size: 0x1500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: false
is_reserved: true
operation_type: RESERVED
reserve: 0x00

when trying to fill the recovery with a flash drive (Download) - error:PMT changed for the ROM; it must be downloaded.
got into a log:

12/11/2014 00: 59: 44.075 FlashTool [8556] [8312] [D]: CDLProxyImpl :: FindPartition (): PMT for BMTPOOL: BMTPOOL [0xffff00a8-0xffff00a8] (.. \ .. \ qt_flash_tool \ Flow \ dlproxyimpl .cpp, 266)
12/11/2014 00: 59: 44.075 FlashTool [8556] [8312] [D]: APCore :: DLOnlyCommand :: CheckPMTLayoutChange (): PMT changed for<BMTPOOL>! (.. \ .. \ qt_flash_tool \ Cmd \ DLOnlyCommand.cpp, 59)
12/11/2014 00: 59: 44.087 FlashTool [8556] [8312] [D]: BackgroundWorker :: run (): App Exception! (PMT changed for the ROM; it must be downloaded.) ((Fw_throw_error, .. \ .. \ qt_flash_tool \ Flow \ ErrString.cpp, 24)) (.. \ .. \ qt_flash_tool \ UI \ src \ BackgroundWorker.cpp , 104)

11/12/14 00: 59: 44.069 BROM_DLL [8556] [8312]: DEBUG: PMTReadCmd :: ReadData (): Part (BMTPOOL), begin_add (0x00000000FFFF00A8), len (0x0000000000000000), part_id (255) (FlashToolLib / sv5 / common / generic / src / partition_table_cmd.cpp: 828)

what to do?
The most interesting thing is that in the firmware 1.1 downloaded from the explay site - the same scatter (except zero fat) and I don’t even repair the recovery from it

Attached files

BROM_DLL_V5.log(1.82 MB)
QT_FLASH_TOOL.log(82.1 KB)
MT6582_Android_scatter.txt(7.45 KB)

[dima5130]

Attempt to restore the phone after a permanent reset FLY IQ456
Format it turned out. And he does not react to anything, he does not want to flash anything and does not want to.
Formatted via SP_Flash_Tool_exe_windows_v5.1420.00 and does not want to sew through it through sp_flash_tool_v3.1336.0.198, it always curses at me
When the “brick” is restored through sp_flash_tool_v3.1336.0.198, according to the instructions, you get the following error (on the screenshot), there is firewood, the battery is charged, the phone is dead and does not turn on

Post has been editedvadeus - 01.05.16, 12:33

Reason for editing: spoiler

[Technik]

[email protected], 00:33

PMT changed for the ROM; it must be downloaded.

In the cap solution.

[atomicsam]

Technik,So I think I do not read the cap? =)
Everything was tried many times, then I stumbled upon the mention of FlashToolMod in which you can ignore errors - and asked for the recovery, so the question was removed, thanks for trying to help.