> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


32 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Philips Xenium W737 - Firmware (OS 4.0)
Sher.voff
Message#1
24.05.13, 16:59
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 797
Check in: 11.01.13
Xiaomi Redmi Note 4X Snapdragon 3/32

Reputation:-  51  +

Philips Xenium W737 - Firmware (OS 4.0)
PicturePhilips Xenium W737
Description | Discussion � | Firmware�

Drivers and Utilities

Firmware

Instructions
Recovery after unsuccessful firmware
INSTRUCTIONS FOR THE RESTORATION OF A BRICK
Getting Root rights with Framaroot
Another way to get Root rights
Video instruction
1. Install the W737 driver on the computer from the CD-ROM that appears when the device is connected (or install from the attached archive). You may need to enable USB debugging to determine the device.
2. Download and unzip Root_with_Restore_by_Bin4ry_v27.zip
3. Run RunMe.bat and select option 1
4. Enable USB debugging in the device and connect the cable
5. After sending the files to the device, unblock it and agree to restore the system in the appeared window (you do not need to enter a password)
6. After 10 seconds, the device will reboot. Disconnect it from the cable. Root received.
Attached fileW737_usb_driver.rar(9.26 MB)

Attached fileRoot_with_Restore_by_Bin4ry_v27.zip(8.27 MB)

In case you encounter an error:
Certificates are installed, but the driver fails validation.
Scenarios for installing the certificate (AddOnce.bat) and launching the program (RunMe.bat) have a common error - they are launched not from the current directory, but from C: \ Windows \ system32,
respectively, the script does not see the files (installing the certificate will simply open and close the window, the installation of the root will say that the file / path was not found)
In order to get rid of errors, right-click on the script - change.
and after the line:
@echo off

add:
cd% ~ dp0

Installation Instructions for Custom CWM Recovery (FOR WINDOWS)
Link to the original post and files:here, factory recovery can takehere, mirror with recovery
1) Install Android SDK
2) download custom recovery and platform-tools.zip (you can use the built-in utilities of the Android SDK)
3) unpack the platform-tools archive and put custom recovery into the folder with its files
4) right-click on the folder with the platform-tools files and select Launch command line here in the menu
5) load the phone into bootloader mode: turn it off and turn on the sound + button until the logo appears
6) connect the device to the cable
7) type in the command prompt window fastboot flash recovery recovery.img
8) after finishing sending the recovery to the phone, disconnect the phone from the cable, open the bottom cover, press and hold the Reset button for 5-7 seconds
9) close the cover and turn on the device

���� � ��������� ��������: download

simultaneously press the switch and sound

This is the CWM recovery version.
At the moment, the following functions fully work:
- wipe data / factory reset
- wipe cache partition
- advanced - wipe dalvik cache
- install zip from sd card
- backup (backup saved on sd card)
- restore (backup is restored from sd card)

If you suddenly restore factory recovery, then you need to delete the file system / etc / install-recovery.sh on the device and re-flash the recovery


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedvaalf - 10.02.17, 22:38
Spotan
Message#42
23.06.13, 18:11
Novice
***
[offline]

Group: Active users
Messages 46
Check in: 13.11.09
Wileyfox Swift 2 Plus

Reputation:-  0  +

My WALKMAN reproduces quietly and with clicks. I tried five other players - everything is fine there.
Ist.
Message#43
23.06.13, 18:18
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 67
Check in: 04.05.07
Dell Axim X51v

Reputation:-  2  +

Spotan @ 06/23/2013, 19:11*
My WALKMAN reproduces quietly and with clicks.

I also hear clicks.
DOC2008
Message#44
23.06.13, 20:15
Veteransavagemessiahzine.com
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8895
Check in: 27.03.08
Meizu Pro 6 Plus 64GB

Reputation:-  3657  +

Ist. @ 06/23/2013, 18:18*
I also hear clicks.

Spotan @ 06/23/2013, 18:11*
My WALKMAN reproduces quietly and with clicks. I tried five other players - everything is fine there.

you surprise me. a) player and sound libraries with another device. I'll post the next version with stock sound. ))

Post has been editedDOC2008 - 23.06.13, 20:16


--------------------
Philips S257 / E722G / TLE821L.
Portable sound:
Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900.
Yarri7
Message#45
27.06.13, 00:38
Novice
***
[offline]

Group: Active users
Messages 49
Check in: 17.01.13
Philips Xenium W336

Reputation:-  3  +

In the OPTIMA firmware, the connection through the bluetooth of the computer with the phone stopped working.
The drivers in the system were determined, but when you open the device in Vin7 x64 and select the file browsing point (through which you can upload a file), after some deliberation, the connection fails.
The same is true when connecting the phone to play its sounds on a computer - also a failure.
At the factory 19 it worked.
DOC2008
Message#46
27.06.13, 11:35
Veteransavagemessiahzine.com
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8895
Check in: 27.03.08
Meizu Pro 6 Plus 64GB

Reputation:-  3657  +

Yarri7 @ 06/27/2013, 00:38*
In the OPTIMA firmware, the connection through the bluetooth of the computer with the phone stopped working.
The drivers in the system were determined, but when you open the device in Vin7 x64 and select the file browsing point (through which you can upload a file), after some deliberation, the connection fails.
The same is true when connecting the phone to play its sounds on a computer - also a failure.
At the factory 19 it worked.

I did not change the "iron" part in my firmware. Neither drivers nor libraries.


--------------------
Philips S257 / E722G / TLE821L.
Portable sound:
Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900.
alexraze
Message#47
27.06.13, 13:01
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 307
Check in: 13.07.12
Sony Xperia XZ1 G8341 / G8342

Reputation:-  22  +

And you can ask to make custom firmware on v19 ?? : blush: I myself am not yet strong in this!


--------------------
Z Ultra RB / Root / Monx 4.4.2 - it is gorgeous| DNS S5003 Lewa OS | DNS s4502m | Philips W737 Dock_V19 | N9006 Note3 Lewa OS | Rikomagic 802lllS 4.2 | Z3c slim rom / unloked / Cybirian8 / - it's just super | XZ1 stock hong kong / ru firmware.
DOC2008
Message#48
27.06.13, 15:01
Veteransavagemessiahzine.com
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8895
Check in: 27.03.08
Meizu Pro 6 Plus 64GB

Reputation:-  3657  +

And you can ask to make custom firmware on v19 ?? I myself am not yet strong in this!

custom is in the subject. look for it - they did not add it to the cap


--------------------
Philips S257 / E722G / TLE821L.
Portable sound:
Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900.
alexraze
Message#49
28.06.13, 09:05
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 307
Check in: 13.07.12
Sony Xperia XZ1 G8341 / G8342

Reputation:-  22  +

Found thanks!


--------------------
Z Ultra RB / Root / Monx 4.4.2 - it is gorgeous| DNS S5003 Lewa OS | DNS s4502m | Philips W737 Dock_V19 | N9006 Note3 Lewa OS | Rikomagic 802lllS 4.2 | Z3c slim rom / unloked / Cybirian8 / - it's just super | XZ1 stock hong kong / ru firmware.
alexraze
Message#50
28.06.13, 12:53
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 307
Check in: 13.07.12
Sony Xperia XZ1 G8341 / G8342

Reputation:-  22  +

Hooray, flashed. While everything is super! Thank you very much for your hard work!


--------------------
Z Ultra RB / Root / Monx 4.4.2 - it is gorgeous| DNS S5003 Lewa OS | DNS s4502m | Philips W737 Dock_V19 | N9006 Note3 Lewa OS | Rikomagic 802lllS 4.2 | Z3c slim rom / unloked / Cybirian8 / - it's just super | XZ1 stock hong kong / ru firmware.
admentor
Message#51
28.06.13, 16:12
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 30.07.10

Reputation:-  1  +

Thanks for firmware 19! Everything was established exactly according to the instructions :-)
vitok
Message#52
04.07.13, 00:09
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 77
Check in: 05.03.08
Philips Xenium W737

Reputation:-  2  +

+

Post has been editedvitok - 05.07.13, 00:36
Drluciffer
Message#53
05.07.13, 09:46
a guest
*
[offline]

Group: Users
Messages 3
Check in: 29.03.08
Asus ZenFone 2 ZE551ML

Reputation:-  0  +

I can not understand whether I'm stupid, or really there is no way to switch languages ​​by "pulling" the space.
Yapona
Message#54
06.07.13, 22:33
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 78
Check in: 11.09.11
Apple iPhone 5s

Reputation:-  17  +

DrLuciffer @ 07/05/2013, 10:46*
I can not understand whether I'm stupid, or really there is no way to switch languages ​​by "pulling" the space.

You can choose any alternative keyboard, for example, I useSmart keyboard. It is faster, more precisely stock and has a bunch of settings.


--------------------
No matter how cool you are or how old you are, but when a two-year-old child gives you a toy phone, you just have to answer the call.
cyber.sergej77
Message#55
08.07.13, 06:38
a guest
*
[offline]

Group: Users
Messages 4
Check in: 07.07.13

Reputation:-  0  +

I asked for help, and my message was deleted. What's wrong? Please again. Somebody help. I have a Philips W737. The phone does not turn on, the computer does not see it. The boot is not included. In the device dispenser, only the port is defined. What to do???

Post has been editedcyber.sergej77 - 08.07.13, 06:58
anmev
Message#56
08.07.13, 07:40
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 269
Check in: 23.02.06

Reputation:-  25  +

cyber.sergej77,
The instructions on the first page did not help? The driver installed everything manually


Posted on 07/07/2013, 07:40:

Tell me where are the standard wallpaper. I tried live, but back in no way. V19 Optima Firmware


--------------------
HTC Touch 3G; Philips W737;Lenovo P780; Redmi Note 3 Pro SE
cyber.sergej77
Message#57
08.07.13, 08:12
a guest
*
[offline]

Group: Users
Messages 4
Check in: 07.07.13

Reputation:-  0  +

The instruction did not help and installed the driver manually. Clamping the volume button and on. does not react at all.

Post has been editedcyber.sergej77 - 08.07.13, 08:17
anmev
Message#58
08.07.13, 09:49
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 269
Check in: 23.02.06

Reputation:-  25  +

cyber.sergej77,
It is not clear what you want to do. In what boot do you enter? And how the computer will see it, if it does not turn on


--------------------
HTC Touch 3G; Philips W737;Lenovo P780; Redmi Note 3 Pro SE
cyber.sergej77
Message#59
08.07.13, 10:12
a guest
*
[offline]

Group: Users
Messages 4
Check in: 07.07.13

Reputation:-  0  +

When you press the volume and turn on, it does not react, before the actions according to the instructions everything worked, but periodically it rebooted itself. It was decided to reflash me, after that he zakirpichilsya. What to do? If anyone knows, tell me if you can step by step.
Labaman
Message#60
09.07.13, 19:09
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 154
Check in: 29.12.09
Samsung Galaxy S7 EDGE SM-G935

Reputation:-  20  +

DOC2008 @ 05.29.2013, 18:23*
Attention!!! Firmware with this method for wrong actions or power outages will cause the phone to wriggle! Do everything at your own peril and risk.

In such a case, I describe a guide on reviving a brick:

If something went wrong during the firmware and your phone does not turn on even after a long press on the RESET, then:
1) Remove the memory card
2) Insert the USB cable into the phone
3) There should be another Qualcomm device, but it will use a different COM port number (for example, in my "normal" mode, the flasher saw the device on COM3, and in the brick mode, "moved" to COM7)
4) Go to the QPST Configurator and add the newly found COM port.
5) Run eMMC Software Download (in Windows 7 and above MANDATORY on behalf of the Administrator, EVEN IF ACCOUNT CONTROL IS DISABLED)
6) Put a tick on Program Boot Loaders
7) Poke a Browse button, choose our Com-port
8) Change the values ​​in the columns Flash Programmer Filename and Boot Image (values ​​are hammered by handles - so be especially vigilant at this stage)
For the firmware above, these are files:
Flash Programmer Filename: MPRG8X25.hex
Boot Image: 8x25_msimage.mbn
9) REMOVE the tick Programm MMC devicre
10) Click Download. The process will be quite fast. We are waiting for a positive message in the program log.
11) If everything went well, then the vibration motor will work on the device and the device Qualcomm & Prod MMC Storage (or something else) should appear in the device list
12) Do not remove the USB cable, tick the Program MMC device and uncheck the Program Boot loaders
13) Then we repeat all the same actions as during the flashing in standard mode, after one EXCLUSION: DO NOT click the Switch device to DOWNLOAD MODE !!!! (He is already in the mode we need!)
14) Immediately click Download
15) The message about the successful restoration of the "brick" is slightly different from the "standard" simply write "File write complite"
16) We press 5 seconds Reset, put the lid in place (if you do not put it - the phone will not start) and start the phone. HOORAY! Got sick!
Labaman
Message#61
10.07.13, 01:53
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 154
Check in: 29.12.09
Samsung Galaxy S7 EDGE SM-G935

Reputation:-  20  +

Labaman @ 07/09/2013, 20:09*
8) Change the values ​​in the columns of Flash Programmer Filename and Boot Image (values ​​are driven by pens - so be especially vigilant at this stage)
For the firmware above, these are files:
Flash Programmer Filename: MPRG8X25.hex
Boot Image: 8x25_msimage.mbn

A couple of explanations: For future firmware versions, the names of these files may differ from those indicated. The boot image file always contains in its name "msimage" and has the extension .mbn
Flash Programmer Filename is usually the only file with the .hex extension in the folder with the firmware and has the same type marking in the name<number>(8x25 as here).
cyber.sergej77 @ 07/08/2013, 11:12*
When you press the volume and turn on, it does not react, before the actions according to the instructions everything worked, but periodically it rebooted itself. It was decided to reflash me, after that he zakirpichilsya. What to do? If anyone knows, tell me if you can step by step.

In some instances of w737, you need to press the PRINCIPLE BOTTOM volume button + the power button to go to recovery. This phenomenon has a place to be, but even the Philips developers themselves (they tormented them by phone about this) cannot explain it. The strangest thing is that it is on SOME instances of this model - in most cases, as the developers themselves explain - it doesn’t matter which of the volume keys to clamp - lower or upper.
The choice of menu items for standard recovery is done by LONG PRESSING the power button.

Post has been editedLabaman - 10.07.13, 01:57

32 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/29/19, 14:21