[X]Assistant

[Sher.voff]

Philips Xenium W737 - Firmware (OS 4.0)
Philips Xenium W737
Description | Discussion пїЅ | FirmwareпїЅ

Drivers and Utilities

Alternative drivers

Firmware

Official

W737_QRD8X25_1322_01_V19G_RU
W737_QRD8X25_1330_01_V22G_RU
Philips W737 1336 V25

Unofficial

W737 v.17 by DOC2008
W737 V19 RU OPTIMA by DOC2008

Mirror on firmware

Instructions

Recovery after unsuccessful firmware
INSTRUCTIONS FOR THE RESTORATION OF A BRICK
Getting Root rights with Framaroot

Another way to get Root rights

Video instruction
1. Install the W737 driver on the computer from the CD-ROM that appears when the device is connected (or install from the attached archive). You may need to enable USB debugging to determine the device.
2. Download and unzip Root_with_Restore_by_Bin4ry_v27.zip
3. Run RunMe.bat and select option 1
4. Enable USB debugging in the device and connect the cable
5. After sending the files to the device, unblock it and agree to restore the system in the appeared window (you do not need to enter a password)
6. After 10 seconds, the device will reboot. Disconnect it from the cable. Root received.
W737_usb_driver.rar(9.26 MB)

Root_with_Restore_by_Bin4ry_v27.zip(8.27 MB)

In case you encounter an error:

[email protected], 15:59

Certificates are installed, but the driver fails validation.
Scenarios for installing the certificate (AddOnce.bat) and launching the program (RunMe.bat) have a common error - they are launched not from the current directory, but from C: \ Windows \ system32,
respectively, the script does not see the files (installing the certificate will simply open and close the window, the installation of the root will say that the file / path was not found)
In order to get rid of errors, right-click on the script - change.
and after the line:

@echo off

add:

cd% ~ dp0

Installation Instructions for Custom CWM Recovery (FOR WINDOWS)

Link to the original post and files:here, factory recovery can takehere, mirror with recovery
1) Install Android SDK
2) download custom recovery and platform-tools.zip (you can use the built-in utilities of the Android SDK)
3) unpack the platform-tools archive and put custom recovery into the folder with its files
4) right-click on the folder with the platform-tools files and select Launch command line here in the menu
5) load the phone into bootloader mode: turn it off and turn on the sound + button until the logo appears
6) connect the device to the cable
7) type in the command prompt window fastboot flash recovery recovery.img
8) after finishing sending the recovery to the phone, disconnect the phone from the cable, open the bottom cover, press and hold the Reset button for 5-7 seconds
9) close the cover and turn on the device

пїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ: download

simultaneously press the switch and sound

This is the CWM recovery version.
At the moment, the following functions fully work:
- wipe data / factory reset
- wipe cache partition
- advanced - wipe dalvik cache
- install zip from sd card
- backup (backup saved on sd card)
- restore (backup is restored from sd card)

If you suddenly restore factory recovery, then you need to delete the file system / etc / install-recovery.sh on the device and re-flash the recovery

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 10.02.17, 22:38

[DOC2008]

W737 v.17 by DOC2008

- deodexing did not do - flashing firmware
- enabled ADB support in the core
- did not delete anything (everyone will delete what he sees fit)
- added root, root explorer and app remover to remove system programs
- added ad blocker
- added gps.conf for faster satellites search
- changed the sound filter (taken from the similar ZTE firmware) - the sound in the headphones became much better
- added switches, clock and brightness control to the curtain
- removed the% symbol when displaying the battery percentage
- something else on the little things

So far nothing else to do with the firmware will not, because factory updates are released 1-2 times a week.

Screenshots:

Installation:

Before installing, make a backup in CWM!

1. Copy the firmware archive to the SD card.
2. Boot into custom recovery (hold the volume button down and press the power button, do not release the volume button until the recovery menu appears)
3. Select in the menu Wipe data / factory reset - confirm
4. Wipe cache partition - confirm
5. Advanced - Wipe dalvik cache - confirm
6. Install zip from sdcard - choose zip from sdcard - select an archive with firmware and confirm
7. Reboot system now

DOWNLOAD



BONUS: HUAWEI LAUNCHER 3D + 3D WIDGETS

Attention! This archive is for installation only on the Philips W737!

Screenshots:

Installation:

- flash archive through CWM recovery
- remove stock launcher

Attached files

Huawei_Launcher_3D.zip(22.02 MB)


Post has been editedshoma_81 - 28.10.14, 16:30

Reason for editing: replaced download link

[DOC2008]

INSTRUCTIONS FOR RECEIVING ROOT ON PHILIPS W737 IN ONE CLICK.

1. Install the W737 driver on the computer from the CD-ROM that appears when the device is connected (or install from the attached archive). You may need to enable USB debugging to determine the device.
2. Download and unzip Root_with_Restore_by_Bin4ry_v27.zip
3. Run RunMe.bat and select option 1
4. Enable USB debugging in the device and connect the cable
5. After sending files to the device, unblock it and agree to update the system in the window that appears (you do not need to enter a password)
6. After 10 seconds, the device will reboot. Disconnect it from the cable. Root received.

Video instruction



Posted on 05/29/2013, 14:53:

INSTRUCTIONS FOR INSTALLING CASTABLE CWM RECOVER ON PHILIPS W737 (UNDER WINDOWS)

- install Android SDK
- download custom recovery and platform-tools.zip (you can use the built-in utilities of the Android SDK)
- unpack the platform-tools archive and put custom recovery in the folder with its files
- right-click on the folder with the platform-tools files and select Launch command line here *** in the menu
- load the phone into bootloader mode: turn it off and turn on the sound + button until the logo appears
- connect the device to the cable
- type in the command prompt fastboot flash recovery recovery.img
- after finishing sending the recovery to the phone, disconnect the phone from the cable, open the bottom cover, press and hold the Reset button for 5-7 seconds
- close the lid and turn on the device

*** in Windows 7, right-click on any folder, while holding down the Shift key, then not the usual, but an expanded menu will open before you, and a couple of additional items will appear in it: “Copy as path” and “Open command window”. The last command will call our command line, and this folder will be open.

Login to custom recovery: simultaneously press the switch and sound

This is the CWM recovery version.

At the moment, the following functions fully work:

- wipe data / factory reset
- wipe cache partition
- advanced - wipe dalvik cache
- install zip from sd card
- backup (backup saved on sd card)
- restore (backup is restored from sd card)

So far this is all that I could properly assemble for 737, because Phillips has not yet provided me with a complete table of system partitions for mounting them correctly in recovery.

If you suddenly restore factory recovery, then you need to delete the file system / etc / install-recovery.sh on the device and re-flash the CWM recovery

Attached files

W737_usb_driver.rar(9.26 MB)
Root_with_Restore_by_Bin4ry_v27.zip(8.27 MB)
recovery.img(6.46 MB)
platform-tools.zip(203.38 KB)

[DOC2008]

Factory firmware W737_QRD8X25_1322_01_V19G_RU


Attention!!! Firmware with this method for wrong actions or power outages will cause the phone to wriggle! Do everything at your own peril and risk.

1. Install the USB driver 737 on the computer.
2. Install the QPST program. You may need to install vcredist_x86.exe from the archive.
3. Carefully and thoroughly study the instructions for the program (in English, but with pictures). Instructions in the archive.
4. Firmware firmware strictly according to the instructions.
5. Disconnect the cable and press and hold the RESET button for 5-7 seconds (the button in the SIM box)
6. Download the phone.

Addition: for firmware on the phone should be factory recovery. It is installed as well as custom.

DOWNLOAD FIRMWARE

Attached files

WG_737_RU_DownloadTool.zip(15.55 MB)


Post has been editedDOC2008 - 29.05.13, 18:16

[Yapona]

DOC2008 @ 05.29.2013, 18:23

for firmware on the phone should be factory recovery

Please tell me where to find the factory recovery after installing a custom CWM, because I realized that when updating without it in any way ...: (

[DOC2008]

Yapona @ 06/02/2013, 19:06

Please tell me where to find the factory recovery after installing a custom CWM, because I realized that when updating without it in any way ...

Factory recovery is in the archive of the factory firmware. If you are on my custom firmware, for the factory update you will have to return to the factory firmware.

just in case I post factory recovery.

Attached files

recovery.img(5.17 MB)

[Oven3003]

Good day to all. Question to DOC2008.
BONUS: HUAWEI LAUNCHER 3D + 3D WIDGETS
Installation:

- flash archive through CWM recovery
- remove stock launcher. How to delete it, under what name is it and in which folder? ROOT everything is there. Thank you in advance. : sveta:

[DOC2008]

Oven3003 @ 06/04/2013, 16:52

- remove stock launcher. How to delete it, under what name is it and in which folder? ROOT everything is there. Thank you in advance.

system / app / Launcher2.apk

[megazlos1]

INSTRUCTIONS FOR INSTALLING CASTABLE CWM RECOVER ON PHILIPS W737 (UNDER WINDOWS)

1) Install Android SDK
2) download custom recovery and platform-tools.zip (you can use the built-in utilities of the Android SDK)
3) unpack the platform-tools archive and put custom recovery into the folder with its files
4) right-click on the folder with the platform-tools files and select Launch command line here in the menu
5) load the phone into bootloader mode: turn it off and turn on the sound + button until the logo appears
6) connect the device to the cable
7) type in the command prompt window fastboot flash recovery recovery.img

After completing 7 points, the message "waiting for devices" appears - and nothing else happens, what is wrong?

Although with the first instruction "INSTRUCTION FOR RECEIVING ROOT ON PHILIPS W737 IN ONE CLICK" - no problems have arisen

Post has been editedmegazlos1 - 04.06.13, 23:22

[DOC2008]

megazlos1 @ 06/04/2013, 23:21

After completing 7 points, the message "waiting for devices" appears - and nothing else happens, what is wrong?

I think you do not have the W737 drivers installed

[megazlos1]

DOC2008 @ 06/06/2013, 12:31

I think you do not have the W737 drivers installed

The driver installed the .root rights, I also received according to your instructions, "INSTRUCTIONS FOR RECEIVING ROOT FOR PHILIPS W737 IN ONE CLICK."

[zhenya_ze]

megazlos1 @ 06/06/2013, 15:38

The driver installed the .root rights, I also received according to your instructions, "INSTRUCTIONS FOR RECEIVING ROOT FOR PHILIPS W737 IN ONE CLICK."

Faced exactly the same problem, decided in the process before installing the drivers. (Comp himself asked them).

[vovasem]

Question to DOC2008. Firmware w737 v.17 by. 5 point of installation did not find this. The fact is that now there is no computer at hand, and I would like a rot. Now it has been updated to 19 and it is not possible to install a pro pro va from the phone. Ready for experiments. And another question is whether it is possible to make the call louder. Thank you in advance!!

[DOC2008]

[email protected], 19:07

Question to DOC2008. Firmware w737 v.17 by. 5 point of installation did not find this.

custom firmware installed through a modified recovery

[email protected], 19:07

The fact is that now there is no computer at hand, and I would like a rot.

without a computer, you will not receive the root

[email protected], 19:07

And another question is whether it is possible to make the call louder.

No, if only experimenting with sound libraries from other devices.

[DOC2008]

W737 V19 RU OPTIMA by DOC2008

- deodexing did not do - flashing firmware
- enabled ADB support in the core
- did not delete anything (everyone will delete what he sees fit)
- added root, root explorer and app remover to remove system programs
- replaced the stock launcher on Huawei Launcher 3D with 3D widgets
- ported the Xperia Walkman player with all Sony sound libraries, working equalizer and surround sound settings (now the sound in the headphones has become good)
- added switches, clock and brightness control to the curtain
- added colored icons in the Settings menu
- replaced the green monster (android) on the USB connection screen
- added ad blocker
- added gps.conf for faster satellites search
- removed the% symbol when displaying the battery percentage
- something else on the little things

SCREENSHOTS:

Installation:

Before installing, make a backup in CWM!

1. Copy the firmware archive to the SD card.
2. Boot into custom recovery (hold the volume button down and press the power button, do not release the volume button until the recovery menu appears)
3. Select in the menu Wipe data / factory reset - confirm
4. Wipe cache partition - confirm
5. Advanced - Wipe dalvik cache - confirm
6. Install zip from sdcard - choose zip from sdcard - select an archive with firmware and confirm
7. Reboot system now

DOWNLOAD

P.S. Thanks to those who do not forget to say "thank you" (I hope these users are not translated)

Post has been editedDOC2008 - 12.06.13, 22:22

[sigida]

I tried to fill in the custom recovery, I filled it. When turned on, it does not go into it, although if you replace it with the factory recovery, everything is restored normally. What kind of problem could it be?

[DOC2008]

[email protected], 13:53

I tried to fill in the custom recovery, I filled it. When turned on, it does not go into it, although if you replace it with the factory recovery, everything is restored normally. What kind of problem could it be?

What does fasboot write at the end of sending recovery?

[sigida]

Like this, as I understand the successful ending.

C: \ Documents and Settings \ Admin \ Desktop \ platform-tools> fastboot flash recovery.img
sending 'recovery' (6616 KB) ...
OKAY [0.609s]
writing 'recovery' ...
OKAY [1.875s]
finished. total time: 2.484s

I tried to upload third-party recovery files, but only responds to the factory ones.
WIN XP OS with configured console launch option.

Post has been editedsigida - 13.06.13, 14:35

[sigida]

I tried a bunch of recovery files, with any other than the factory phone, the sound "-" and on hangs when you press. Just the splash screen is burning, I fill the factory back - everything works} -)

[DOC2008]

Sigida @ 06/13/2013, 17:26

I tried a bunch of recovery files, with any other than the factory phone, the sound "-" and on hangs when you press.

and where did you find this bunch? I have so far assembled only one workable mod. recovery

[Spotan]

In the firmware V19 RU OPTIMA in the application menu there is a label "Maps". If you click on it, Huawei Launcher closes with an error. How to remove it from the menu, if possible?