Rum and shake franca
You throw on the SD card
Go to the recovery
Then in the CWM
Do a wipe data / factory reset
In doing mounts and storage format / system (purity desired for installation)
There do mount / system (rДЃdД«tu unmount / system)
We go to the root
Choose install zip from sdcard
Cwm to spend your firmware and install it
Then We perform an operation with GAPS (also holding up to rekaveri and install GAPS)
We go to the root and go back to mounts and storage
Making mount / system (rДЃdД«tu unmount / system)
Reboot (but first go to the root of rekaveri, first download takes 5 minutes, do not panic :-))
Done!

soon will be, you can look on xda

Bild 7 RC3 | Franca (catalog) | Fix the low volume during the call

Not found

• downloadAOKP_i8160_19112013.zipand throw in a SD-card root
• Recovery in overdrive and make a backup copy of your Rom
• It is recommended to make the wipe data / factory reset
• Select Install zip from sdcard
• Select Rom and wait for the complete installation
• Select and installFix # 1
• Reboot
• Done!

1. Download files with CM11 and Gapps'y (references below) therefor;
2. We write NOT unpacking both archives to the root of a removable memory card;
3. Go to the CWM, if not, then put a one-off (a reference to it is in the header);
Further in CWM:
4. Select "Wipe Data / Factory Reset";
5. Select "Install the Zip from External Storage";
6. Select the file from the CM11;
7. In the same way, we flash the archive with GApps;
8. Go to the root of CWM, and select "Reboot System Now";
9. Done!

Full history of changes in Russian

Build 03.10:
- Updated source code;
- Fixed problems with playing videos in YouTube;

Build 07.08:
- Updated source code;
- Fixed problems with OMX and decoding of sound;
- Added a frequency 1250MGts. for the CPU;
- Fixed UV (undervoltage) at NT Settings;

What's new in the assembly of 07/06:
- Updated source code;
- Removed the Governor "PegasusQ";
- Added a "step" in the 100MHz frequency for the CPU;
- Increased switching speed;
- The "NT Settings" returned undervoltage option;

What's new in the assembly of 07/06:
- Updated source code;
- Adjusted Voltage CPU;
- Fixed an issue with the definition of the location;

What's new in the assembly of 07/06:
- Updated source code;
- OS Android is updated to version 4.4.3;
- Fixed EXFAT;

What's new in the assembly of 13/05:
- Updated source code;
- Added option 2Tap2Wake;
- Fixed BLN;
- Improved KSM;
- Included ZRAM;
- Fixed the "fall" SystemUI;
- NovaThor Settings updated to version 1.4;

What's new in the assembly of 03/05:
- Updated source code;
- FFMPEG codec optimized for STE;
- Fixed calls from BLN;
- Added new library for the display (copybit, hwcomposer, gralloc ...);
- Improved KSM;
- Fixed spam from "memtrack" in LogCat;

What's new in the assembly of 03/05:
- Updated source code;
- Fixed a bug SystemUI;
- Fixed "freezes";
- Added native support BLN;

What's new in the assembly of 30/04:
- Updated source code;
- Fixed value Dalvik VM;
- Updated NovaThor Settings app to version 1.3.5;

What's new in the assembly of 22/04:
- Updated source code;
- Cleaned the core;
- Fixed problems with GPU acceleration;
- Updated NovaThor Settings app to version 1.2;
- Possibly fixed a problem with A-GPS;

What's new in the assembly of 11/04:
- Updated source code;
- Fixed modem mode;
- Ace 2 Settings: many improvements and bug fixes;
- Ace 2 Settings: added the ability to decrease stress;
- Ace 2 Settings: control the charging cycle is implemented;

What's new in the assembly of 25/03:
- Updated source code;
- Ace 2 Settings: fixed many bugs;
- Ace 2 Settings: added UKMS switch;
- Ace 2 Settings: added icons;

What's new in the assembly of 17/03:
- Updated source code;
- Fixed low volume of the incoming call;
- Updated audio ABBAmp driver;
- Finally Fixed OMX;

What's new in the assembly of 02/03:
- Updated source code;
- Added test RIL (through incorporation build.prop);
- Improved GPS performance;
- Fixed memory leak;
- Added Polish in "Galaxy Ace 2 Settings";
- Fixed a black screen from the owners of the driver S6D27A1;

What's new in the assembly of 02/03:
- Updated source code;

What's new in the assembly of 01/03:
- Updated source code;
- Fixed problems with BT;
- Added switch Sweep2Wake;
- Returned kernel version 3.0.31;
- Added a new mode of CPU power;
- Added input mode / Sioplus output;
- Added Governor PegasusQ;
- Reduced consumption of RAM;
- Fixed problems with A-GPS;

What's new in the assembly of 13/02:
- Updated source code;
- Fixed a standard camera;
- Fixed battery statistics;
- Added Governor abyssplug;
- Removed Governor ondemandq;
- Fixed icon of receiving / sending data;
- Fixed tetering on devices the driver WS2401;
- Fixed black screen on devices with driver S6D27A1;
- Removed the multiplayer mode;
- Added Sweep2Wake;
- Added switch Sweep2Wake function Ace 2 Settings;

What's new in the assembly of 05/02:
1. Updated the source;
2. Fixed receiving / sending data icon;
3. Fixed OMX;
4. Fixed a bug off / reset the advanced menu;
5. Added ability to change the configuration of the memory;

What's new in the assembly of 27/12:
1. Updated the source;

What's new in the assembly of 26/12:
1. Updated the source;
2. Returned to the old version of RIL;

What's new in the assembly of 10/12:
1. Updated RIL;
2. Updated the source;

What's new in the assembly of 03/12:
1. Updated the source;
2. Fixed Youtube;

What's new in build from 01.12:
1. Improved speed and stability;
2. Optimization of memory;

What's new in the assembly of 29/11:
1. Fixed problem with sound;
2. Changed butanimatsiya;

Download from Dev-Host | Download GApps

General AOKP function, CM10.1, PA, Carbon ROM
Free Android tweaker
PIE panel (also has a color)
HALO
CM10.1 HDR Camera
Tons of customization
The latter (at the time of) the core CM10, compiled from source
Gapsincluded
Exynos HWComposer
Lokskrin with support for up to five icons
Support for up to 8 of their signals (as I understand)
The label in the center of notifications
Library BRAVIA Engine
BRAVIA XLoud Audio library
DPI settings for each application
Widgets Chronus of CM10.1
Endless widgets on lokskrine
You can configure the action when you press the home button while lokskrine
Fast / retaining Nadachi widgets application Weather and Clock
JellyBAM panel settings
AOKP settings, CM and PA there is also a
The DVR storage mode
The clock in the style of Chronus CM
OTA updates via UpdateMe
Muses. Apollo player (the couple is included)
quick SMS
Hacked Bluetooth to transfer / adoption APK files
Hacked YouTube for HD video playback over 3G / WIFI
Init.d scripts
script JEellyBOOM
Tweek for good quality media
Tweek for smooth scrolling
Trebuchet launcher
Clear Bass sound from Sony
Xloud from Sony Ericsson (greater volume and cleaner sound from the speakers)
Dolby Digital Sound (EQ, bass amplifier, installation and setting up for surround sound)
Surround Sound (Deep bass and reduce distortion bass EQ settings plus support)
Butanimatsiya special for JellyBAM (from metallaxis)
You can set the clock in the status bar (center / right / not at all)
Volume bar
Weather lokskrine
vibration switch lokskrina
Performance tuning and display (color)
brightness adjustment slider
Multi-lingual
style JellyBAM
And thisnot all ! Install and get even more features!

Shake and ask franca
You throw on the SD card
Come to the CWM
Wipe Data / Factory Reset
install request
then franca
Reboot
Done!

P.S. In theory, you can do without franca, in the description indicates that the addition is not necessary, if that - accomplish your goal (in case there are any problems, I might add here). Thank.

Sheer Prosha (dev-host)| She Prosha (Yandex.Disk will soon) |Franca (catalog) | Sources (if anyone should, bitbucket, find there)

absent

Rom throw off the external SD Card
пїЅ make a backup
• If you are sewn on:
a) the previous version AOKR, just make Wipe cache and see Advanced Wipe dalvik-cache
b) if the other 4.2, do the same thing (in any case, wipe data is recommended)
c) if any other version of Android (estesstvenno since 4.1.2), then Wipe data / factory reset
• After Install zip from sdcard (zip find the firmware file where the left)
• Choose your Rom and wait for the complete installation
пїЅ This item is for those who want to have full gappsy (as in firmware sewn minimum) Here is the link to the fullAnd then Install zip from sdcard
• select reboot system now
• And you're done!)

Firmware on the Dev-Host
Firmware on Ya.Disk (thanksandroid.castom )

Rum and shake franca
You throw on the SD card
Go to the recovery
If you ...
1) early version of Slim - cash and cash delvik
2) Other 4.3 - the same thing, but in case of boot problems, it is better to do even wipe date / Factory reset.
3) other android - cache, the cache and delvik date.
Next, set the rum and franca
Reboot and you're done!

Franca (catalog)
Prosha new, on January 31, 2014 (Google Drive)
Prosha 2.1 on ya.diske fromMr.DevilChannel
Prosha 2.2 on ya.diske fromMr.DevilChannel
P.S. not all links have been shortened using services bitly (fill in the new ya.disk and ask and not shortened franca). Klikayte safely and get where you need.

To go to Settings- SWAPO) Additional settings (advanced options) -) device (device) -) additional (advanced), include storadzhes swap and reboot the phone.

Alya (a'la) font kit-kat:http://www.mediafire.com/?ec9tk3uaq89fmwo

Turning off the backlit keys and something else:http://www.mediafire.com/?dcq8si0xa1s348j

All zips are installed in CWM without a wipe after flashing installation (can not immediately comment on polishvodki not).

p.S. announced a mini-contest: plus a turnip to the person who will fill a new request to ya.disk. Only no one word. shhh ...

There will be quoted comments from users about the firmware. All this economy will be updated.

I check myself, and you tell me

Video installation (thankszaryab360)

Rom throw off the external SD Card
пїЅ make a backup
• If you are sewn on:
a) the previous version OmniROM, then just make Wipe cache and see Advanced Wipe dalvik-cache
b) if the other 4.3.1, do the same thing (in any case, wipe data is recommended)
c) if any other version of Android (estesstvenno since 4.1.2), then Wipe data / factory reset
• After Install zip from sdcard (zip find the firmware file where the left)
• Choose your Rom and wait for the complete installation
• put gappsy
• Then put Ruth
• select reboot system now
• And waiting)

OmniROM on goo.im | OmniROM on Ya.Disk | Gapps on goo.im

Installing firmware:
1. Download files with CM11 and Gapps'y (references below) therefor;
2. We write NOT unpacking both archives to the root of a removable memory card;
3. Go to the CWM, if not, then put a one-off (a reference to it is in the header);
Further in CWM:
4. Select "Wipe Data / Factory Reset";
5. Select "Install the Zip from External Storage";
6. Select the file from the CM11;
7. In the same way, we flash the archive with GApps;
8. Go to the root of CWM, and select "Reboot System Now";
9. Done!

Change memory places
To change the memory locations to stitch the file "PartitionChangerCM11.zip" (cm. Under spoiler "Download") through the CWM.

Assembling 07/06:
- Updated source code;
- OS Android is updated to version 4.4.3;

Assembling 19/05:
- Updated source code;
- Fixed a problem with the battery;
- Added optimization JustArchi's ArchiDroid - v2, part 1;
- Corrections from gerrit;
- Fixed playback of media files;
- Fixed Threema;
- Fixed a problem with the library libstelpcutils;
- Cleaned sources;

Assembling 03/05:
- Updated source code;
- Collect new STE library;
- Fixed the "fall" InCallUI;
- Trying to fix netflix / twitch;
- Improved the new engine;

Assembling 09/05:
- Updated source code;
- Display Libraries completely assembled source code NovaTP GCC 4.9;
- Display: use libraries libgralloc;
- Display: use libraries libcopybit;
- Diploma: Library used libhwcomposer;
- Display: no more lags and bugs related to the interface;
- Significantly improved performance;
- Fixed a long shutdown;
- Added a new engine the CM;

Assembling 05/05:
- Updated source code;
- Updated version of the SM to M6;

Assembling 01/05:
- Updated source code;
- Small fixes SM source;
- Reworked native patch;
- Reduced load on the CPU, and reduced battery consumption;
- Improved support for clipboard;
- system and kernel compiled with NovaTP GCC4.9 for better performance;
- Fixed restart and shutdown;

Assembling 26/04:
- Fixed all the bugs;

Assembling 10/04:
- Updated source code;
- Fixed graphical artifacts;
- Small fixes in Gerrit; (?)
- Fixed stats battery;

Assembling 08/04:
- Updated source code;
- Fixed sync contacts with Facebook;
- Removed the ability to record video with the screen (this function does not work);
- Fixed stats battery;

Assembling 22/03:
- Updated source code;
- Made minor fixes in RIL;
- Updated USB and ADB drivers;
- Fixed a problem with the low volume of incoming calls (possible);
- Increased WIFI shutdown speed;
- Fixed WIFI power-saving mode;

Assembling 17/03:
- Updated source code;
- Made minor fixes in RIL;
- An attempt was made to increase the stability of the camera;
- An attempt was made to fix the problem of finding networks of some operators;

Assembling 12/03:
- Updated source code;
- Made minor fixes in RIL;
- An attempt was made to fix the problem of finding networks of some operators;
- Improved media management buffer;

Assembling 07/03:
- Updated source code;
- Made minor fixes in RIL;
- Fixed problems with international roaming;
- Completely solved the problem with a call for some operators;

Assembling 07/03:
- Updated source code;
- Made minor fixes in RIL;
- Improved Internet under poor signal;
- An attempt was made to correct the Service;

Assembling 02/03:
- Updated source code;
- Fixed 3G indicator;
- Fixed problems with notifications;
- Made a lot of corrections in RIL;
- Fixed graphical artifacts;
- Increased stability;

Assembling 02/03:
- Updated source code;
- RIL is fully assembled from the source;
- Completely remove the "Spam" in the logs;
- Cavity fixed all the problems with GSM-module;
- Reduced energy consumption of telephone services;
- Removed extra code needed for Samsung RIL;
- Completely remove all servesy STE RIL, which consumed a lot of energy;
- Fixed emergency GSM-network notification;
- it will greatly facilitate the system, due to the removal of excess STE-code;
- Increased stability;

Assembling 20/02:
- Updated source code;
- Implemented auto-sensing audio for 44.1 / 48kHz;
- Optimized AOSP RIL;
- Optimized battery consumption;

Assembling 17/02:
- Updated source code;
- Made significant improvements in RIL;

Assembling 13/02:
- Updated source code;
- Fixed problems with certain cards in applications;

Assembling 12/02:
- Updated source code;
- Made some improvements UI;
- Added support for 802.11n tetering;
- Added support for USB-tetering with OS X;

Assembling 09/02:
- Updated source code;
- Reduced charging time in the open position;
- Increased transfer speed VT files;
- Removed extra code;

Assembling 07/02:
- Updated source code;
- Increased stability;
- Fixed a creaking sound;
- Significantly enhanced smoothness (when upgrading it is recommended to wipe dalvik!)

Assembling 05/02:
- Updated source code;
- Increased transmission speed of Computers;
- Reduced energy use Wi-Fi when the screen lock;

Assembling 02/02:
- Updated source code;
- Increased the accuracy of battery statistics
- Reduced the phone is switched off;
- Added core overclocking, and the Voltage higher;

Assembling 01/02:
- Updated source code;
- Improved buffering AOSP OMX;
- Fixed the speakerphone during a call time (possibly);

Assembling 28/01:
- Updated source code;
- Used: Another part of the source of STE (part 2);
- Added support for audio to 48KHz;
- Significantly increased quality recording microphone;

Assembling 26/01:
- Updated source code;
- Increased stability;
- Added support for AOSP RIL (5/5);
- The work on the AOSP OMX;
- Audio codecs are collected from the source (2/3);
- produce more clean sources;

Assembling 24/01:
- Updated source code;
- Added support for AOSP RIL (4/5);
- Implemented the camera / OMX in AOSP, all problems are solved with RIL (probably);
- Audio codecs are collected from the source (1/3);

Assembling 20/01:
- Updated source code;
- Added support for AOSP RIL;
- Removed all unused java classes;

Assembling 20/01:
- Updated source code;
- Produced optimization RIL stability and reduced power network;
- Implemented the camera / OMX in AOSP;

Assembling 18/01:
- Updated source code;
- Increased stability;
- Fixed a problem with time zones;
- Fixed problems with the 2G / 3G switch;
- Carry out training to upgrade via OTA (Over the Air);

Assembling 17/01:
- Updated source code;
- another attempt to fix the clock;
- Increased stability;
- Improved video playback;
- Clean the firmware;

Assembling 16/01:
- Updated source code;
- another attempt to fix the clock;
- Significantly increased smoothness;

Assembling 15/01:
- Updated source code;
- Fixed problem with sound;

Assembling 14/01:
- Updated source code;
- Fixed low volume of the incoming call when the hands-free communications;
- Increased stability;
- Added code for Bluetooth Debbugging;

Assembling 13/01:
- Updated source code;
- Increased stability;
- Fixed all video players including Twitch;
- Increased speed of "Dialing";

Assembling 12/01:
- Updated source code;
- Increased stability;
- Fixed blur images for quick viewing of the camera;
- Reduced energy consumption;

Assembling 11/01:
- Updated source code;
- Fixed battery zhor because of yesterday's correction of a bug with the clock;

Assembling 10/01:
- Updated source code;
- Improved sound quality;
- Fixed a problem with the clock;

Assembling 09/01:
- Updated source code;
- paying unnecessary changes to BT;

Assembling 08/01:
- Updated source code;
- The speed of the camera;
- Increased stability;

Assembling 07/01:
- Updated source code;
- Fixed a rapid discharge with the included WiFi;
- Reduced the phone is switched off;

Assembling 06/01:
- Updated source code;
- An attempt was made to correct the video Twitch;
- Fixed bug in the chamber when viewing pictures;
- Update the Toolchain;

Assembling 05/01:
- Updated source code;
- Fully Fixed-party cameras and applications that use it;
- Fully Fixed-party video players;

Assembling 04/01:
- Updated source code;
- Increased stability;
- CM version has been updated to M2;
- Reduced power consumption display;

Assembling 03/01:
- Updated source code;
- Increased battery life;

Assembling 02/01:
- Updated source code;
- Increased battery life;
- Increased stability;

Assembling 01/01:
- Updated source code;
- Changes to BT to support the FM-radio;
- An attempt was made to correct the video quality in YouTube;

Assembling 30/12:
- Updated source code;
- Reduced load on the CPU when playing audio;
- Includes support for FM-radio (possibly);
- Added a missing codec OMX;

Assembling 29/12:
- Updated source code;
- Updated RIL;
- The camera is compiled from new sources;
- Removed unnecessary changes in the OMX;
- Reduced loading time;

Assembling 28/12:
- Updated source code;
- Fixed errors in RIL;
- A great deal of optimization;

Assembling 27/12:
- Updated source code;
- Rewrote RIL;
- Reduced battery consumption when playing videos and songs;

Assembling 26/12:
- Updated source code;
- Faster autofocus in the camera;
- Reduced battery consumption when playing videos and songs;

Assembling 25/12:
- Updated source code;
- Updated the clipboard;
- Reduced battery consumption of network interfaces (WiFi / Bluetooth / GSM);

Assembling 24/12:
- Updated source code;
- Reduced battery consumption of network interfaces (WiFi / Bluetooth / GSM);

Assembling 23/12:
- Updated source code;
- Fixed Netflix;
- Fixed problems with video players;
- Improved support for DivX;

Assembling 22/12:
- Updated source code;
- Fixed inability to restart or turn off your phone;
- Updated the clipboard;

Assembling 21/12:
- Updated source code;
- Improved read / write speed of a memory card;
- Reduced loading time of your phone;
- Updated the clipboard;

Assembling 19/12:
- Updated source code;
- Fixed black screen when viewing some video;
- Faster camera;

Assembling 18/12:
- Updated source code;
- Removed unnecessary changes in the OMX;

Assembling 17/12:
- Updated source code;
- Faster Bluetooth;
- Fixed graphical artifacts;
- Fixed low ringer volume speakerphone;

Assembling 16/12:
- Updated source code;
- Increased stability;

Assembling 15/12:
- Updated source code;
- A great deal of optimization;
- Improved performance of Wi-Fi;
- Reduced energy consumption;

Assembling 14/12:
- Updated source code;
- A great deal of optimization;
- Returned to the letter "K" in a mini-game in the settings;

Download | Download GApps for Android 4.4 | Download the script to change the memory